Click to view details
Desi Machines: Your One-Stop Solution for Heavy Machinery, Comparison, and Unbeatable Deals!

Contact Us



    Your Captcha*

    captcha

    Contact Info

    BEML BG605A VS SEM 917F Motor Grader

    BEML BG605A
    • Engine
      BEML 170.3 HP
    • Blade
      3665 mm
    • Weight
      15800 kg
    • Turning Radius
      7400 mm
    • Max Forward Speed
      44.2 km/hr
    • Max Reverse Speed
      31.3 km/hr
    Price Available Soon*
    Medium (12-20 Ton)
    SEM 917F
    • Engine
      SDEC 150 HP
    • Blade
      3669 mm
    • Weight
      13160 kg
    • Turning Radius
      7300 mm
    • Max Forward Speed
      40 km/hr
    • Max Reverse Speed
      29 km/hr
    Price Available Soon*
    Medium (12-20 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights BEML BG605ASEM 917F
    BEML BG605A VS SEM 917F Motor Grader
    BEML BG605A Motor grader
    BEML BG605A
    Price Available Soon
    SEM 917F Motor Grader Price in India
    SEM 917F
    Price Available Soon
    Particulars BEML BG605A SEM 917F

    BEML BG605A Vs SEM 917F Motor Grader Price, Technical Specifications & Features

    Brand BEML SEM
    Type Medium (12-20 Ton) Medium (12-20 Ton)
    Price Price Available Soon Price Available Soon
    Engine BEML 170.3 HP SDEC 150 HP
    Weight 15800 kg 13160 kg
    Min. Turning Radius 7400 mm 7300 mm
    Max. Forward Speed 44.2 km/hr 40 km/hr
    Max. Reverse Speed 31.3 km/hr 29 km/hr
    Quick Overview:

    The BEML BG605A motor grader is built to endure long-term road development tasks, offering consistent, reliable performance in all work environments.

    The SEM 917F series Motor Grader is equipped with an SDEC engine and a PPPC load-sensing hydraulic system for consistent and precise blade movement and reduced fuel consumption.

    BEML BG605A Vs SEM 917F Motor Grader Price, Technical Specifications & Features

    BEML BG605A SEM 917F
    Brand
    BEML SEM
    Type
    Medium (12-20 Ton) Medium (12-20 Ton)
    Price
    Price Available Soon Price Available Soon
    Engine
    BEML 170.3 HP SDEC 150 HP
    Weight
    15800 kg 13160 kg
    Min. Turning Radius
    7400 mm 7300 mm
    Max. Forward Speed
    44.2 km/hr 40 km/hr
    Max. Reverse Speed
    31.3 km/hr 29 km/hr
    Quick Overview:

    The BEML BG605A motor grader is built to endure long-term road development tasks, offering consistent, reliable performance in all work environments.

    The SEM 917F series Motor Grader is equipped with an SDEC engine and a PPPC load-sensing hydraulic system for consistent and precise blade movement and reduced fuel consumption.

    BEML BG605A Vs SEM 917F Motor Grader Key Highlights

    BEML BG605A SEM 917F
    Engine Make BEML BSAA6D125 BSIII CEV SDEC SC7H170G5E
    Max Torque 785 Nm @ 1200 rpm 730 Nm @ 1200 - 1500 rpm
    Fuel Tank 250 L 230 L
    Hydraulic System 58 L 55 L
    Tires 14.00 x 24 - 16 PR (Tube type) G-2 type tyre 13-24 12PR
    Frame Height NA NA
    Max Lift Above Ground 400 mm 435 mm
    Max Cutting Depth 500 mm 750 mm
    Blade Pitch Angle NA NA
    Wheel Base 6570 mm 5830 mm
    Overall Length 10490 mm 8588 mm
    Overall Height 3679 mm 3370 mm
    Warranty 1 Yr. / 2500 hr. 1 Year
    AC Cabin Not Available Standard
    GPS Not Available Optional

    BEML BG605A Vs SEM 917F Motor Grader Key Highlights

    BEML BG605A SEM 917F
    Engine Make
    BEML BSAA6D125 BSIII CEV SDEC SC7H170G5E
    Max Torque
    785 Nm @ 1200 rpm 730 Nm @ 1200 - 1500 rpm
    Fuel Tank
    250 L 230 L
    Hydraulic System
    58 L 55 L
    Tires
    14.00 x 24 - 16 PR (Tube type) G-2 type tyre 13-24 12PR
    Frame Height
    NA NA
    Max Lift Above Ground
    400 mm 435 mm
    Max Cutting Depth
    500 mm 750 mm
    Blade Pitch Angle
    NA NA
    Wheel Base
    6570 mm 5830 mm
    Overall Length
    10490 mm 8588 mm
    Overall Height
    3679 mm 3370 mm
    Warranty
    1 Yr. / 2500 hr. 1 Year
    AC Cabin
    Not Available Standard
    GPS
    Not Available Optional

    BEML BG605A Vs SEM 917F Motor Grader Specifications

    Engine

    BEML BG605A SEM 917F
    Model BEML 170.3 HP SDEC 150 HP
    Fuel Diesel Diesel
    Type 4 stroke; water-cooled; Turbocharged overhead valve; direct injection; mechanical variable speed governor. CEV-V Turbocharger ; Electronically controller; VHP
    Gross Power 170.3 HP (127 kW) @ 1800 rpm 150 HP/167 HP (112 kW / 125 KW) @ 2200 rpm
    Number Of Cylinders 6 inline 6
    Max Torque 785 Nm @ 1200 rpm 730 Nm @ 1200 - 1500 rpm
    Displacement 11.04 L 7.15 L
    Battery 2 x 12 / 200 Ah NA
    Alternator 24V / 45A NA

    Transmission

    BEML BG605A SEM 917F
    Type BEML - Hydroshift Transmission Advance/HangChi - Converter , Powershift with 6 Forward & 3 Reverse

    Speed

    BEML BG605A SEM 917F
    Max. Forward Speed 44.2 km/hr 40 km/hr
    Max. Reverse Speed 31.3 km/hr 29 km/hr

    Axles

    BEML BG605A SEM 917F
    Rear Axle Full floating rear axle is made of forged heat treated steel. No Spin Differential
    Front Axle Elliot - type Oscillating Axle ±16°

    Tyres

    BEML BG605A SEM 917F
    Size 14.00 x 24 - 16 PR (Tube type) G-2 type tyre 13-24 12PR

    Steering

    BEML BG605A SEM 917F
    Type Orbitrol; full hydraulic steering system Articulated Frame Steering
    Minimum Turning Radius 7400 mm 7300 mm
    Steering-Angle 40° ±45°

    Brakes

    BEML BG605A SEM 917F
    Service Foot operated; oil disk brakes; Air actuated on four wheels and sealed for adjustment-free operation. Two cross brake lines for sure braking. Air over oil; Disc
    Parking Hand operated internal expanding; shoe type; duo-servo type actuated on transmission output shaft. Spring-actuated; air-released parking brake

    Frame

    BEML BG605A SEM 917F
    Front Frame Height NA NA
    Front Frame Width NA NA
    Front Frame Thickness NA NA

    MoldBoard

    BEML BG605A SEM 917F
    Type Box-section construction with wear resistant steel; hydraulic blade side shift and tip control; cutting edges and side edges are attached. NA
    Blade Length 3665 mm 3669 mm
    Blade Height 540 mm 580 mm
    Blade Thickness 20 mm 20 mm
    Cutting Edge 152 mm x 27 mm NA
    Blade Pull NA NA
    Blade Down Pressure NA NA
    Moldboard Side Shift (Right/Left) NA NA
    Maximum Shoulder Reach (Right/Left) 1955 mm / 1670 mm NA
    Maximum Lift Above Ground 400 mm 435 mm
    Maximum Cutting Depth 500 mm 750 mm
    Blade Pitch Angle NA NA

    Hydraulics

    BEML BG605A SEM 917F
    Type Four gear pumps powering the work equipment; steering and transmission; differential lock - unlock and hydraulic circuits Load Sensing; PPPC with Variable Piston
    Maximum Pump Flow 2 x 39 L/min 162 L/min
    Maximum System Pressure 17.2 MPa 22 MPa

    Service Capacities

    BEML BG605A SEM 917F
    Fuel Tank 250 L 230 L
    Cooling System 55 L 37 L
    Engine Oil 26 L 17.5 L
    DEF Tank NA 19 L
    Trasnsmission Oil 36 L 17 L
    Final Drive 30 L NA
    Hydraulic System 58 L 55 L
    Circle Reverse Housing NA NA

    Weight

    BEML BG605A SEM 917F
    Gross Vehicle Weight 15800 kg 13160 kg
    Moldboard Base 2640 mm 2542 mm
    Wheelbase 6570 mm 5830 mm
    Tandem Wheelbase 1515 mm 1510 mm
    Width of Standard Moldboard 3665 mm 3669 mm
    Overall Length 10490 mm 8588 mm
    Tread Gauge 2209 mm 2142 mm
    Width of Tires 2524 mm 2491 mm
    Articulation, left or right NA 20°
    Minimum Ground Clearence 325 mm 615 mm

    BEML BG605A Vs SEM 917F Motor Grader Specifications

    Engine

    BEML BG605A SEM 917F
    Model
    BEML 170.3 HP SDEC 150 HP
    Fuel
    Diesel Diesel
    Type
    4 stroke; water-cooled; Turbocharged overhead valve; direct injection; mechanical variable speed governor. CEV-V Turbocharger ; Electronically controller; VHP
    Gross Power
    170.3 HP (127 kW) @ 1800 rpm 150 HP/167 HP (112 kW / 125 KW) @ 2200 rpm
    Number Of Cylinders
    6 inline 6
    Max Torque
    785 Nm @ 1200 rpm 730 Nm @ 1200 - 1500 rpm
    Displacement
    11.04 L 7.15 L
    Battery
    2 x 12 / 200 Ah NA
    Alternator
    24V / 45A NA

    Speed

    BEML BG605A SEM 917F
    Max. Forward Speed
    44.2 km/hr 40 km/hr
    Max. Reverse Speed
    31.3 km/hr 29 km/hr

    Axles

    BEML BG605A SEM 917F
    Rear Axle
    Full floating rear axle is made of forged heat treated steel. No Spin Differential
    Front Axle
    Elliot - type Oscillating Axle ±16°

    Tyres

    BEML BG605A SEM 917F
    Size
    14.00 x 24 - 16 PR (Tube type) G-2 type tyre 13-24 12PR

    Steering

    BEML BG605A SEM 917F
    Type
    Orbitrol; full hydraulic steering system Articulated Frame Steering
    Minimum Turning Radius
    7400 mm 7300 mm
    Steering-Angle
    40° ±45°

    Brakes

    BEML BG605A SEM 917F
    Service
    Foot operated; oil disk brakes; Air actuated on four wheels and sealed for adjustment-free operation. Two cross brake lines for sure braking. Air over oil; Disc
    Parking
    Hand operated internal expanding; shoe type; duo-servo type actuated on transmission output shaft. Spring-actuated; air-released parking brake

    Frame

    BEML BG605A SEM 917F
    Front Frame Height
    NA NA
    Front Frame Width
    NA NA
    Front Frame Thickness
    NA NA

    Moldboard

    BEML BG605A SEM 917F
    Type
    Box-section construction with wear resistant steel; hydraulic blade side shift and tip control; cutting edges and side edges are attached. NA
    Blade Length
    3665 mm 3669 mm
    Blade Height
    540 mm 580 mm
    Blade Thickness
    20 mm 20 mm
    Cutting Edge
    152 mm x 27 mm NA
    Blade Pull
    NA NA
    Blade Down Pressure
    NA NA
    Moldboard Side Shift (Right/Left)
    NA NA
    Maximum Shoulder Reach (Right/Left)
    1955 mm / 1670 mm NA
    Maximum Lift Above Ground
    400 mm 435 mm
    Maximum Cutting Depth
    500 mm 750 mm
    Blade Pitch Angle
    NA NA

    Hydraulics

    BEML BG605A SEM 917F
    Type
    Four gear pumps powering the work equipment; steering and transmission; differential lock - unlock and hydraulic circuits Load Sensing; PPPC with Variable Piston
    Maximum Pump Flow
    2 x 39 L/min 162 L/min
    Maximum System Pressure
    17.2 MPa 22 MPa

    Service Capacities

    BEML BG605A SEM 917F
    Fuel Tank
    250 L 230 L
    Cooling System
    55 L 37 L
    Engine Oil
    26 L 17.5 L
    DEF Tank
    NA 19 L
    Trasnsmission Oil
    36 L 17 L
    Final Drive
    30 L NA
    Hydraulic System
    58 L 55 L
    Circle Reverse Housing
    NA NA

    Weight

    BEML BG605A SEM 917F
    Gross Vehicle Weight
    15800 kg 13160 kg
    Moldboard Base
    2640 mm 2542 mm
    Wheelbase
    6570 mm 5830 mm
    Tandem Wheelbase
    1515 mm 1510 mm
    Width of Standard Moldboard
    3665 mm 3669 mm
    Overall Length
    10490 mm 8588 mm
    Tread Gauge
    2209 mm 2142 mm
    Width of Tires
    2524 mm 2491 mm
    Articulation, left or right
    NA 20°
    Minimum Ground Clearence
    325 mm 615 mm

    © 2025 Desi Machines All rights reserved.

    Designed & Developed by PromotEdge

    !

    Help Us Reach You!

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare


      Kindly fill out the below form. Our representative will get in touch with you