Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|
| Particulars | XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|
Comparing the Sany SY225C-10HD GENe and the XCMG XE250C GM, both machines are equipped with diesel engines, standard AC cabins, and GPS systems for advanced operation. Sany targets efficiency with moderate engine power and superb gradeability, while XCMG provides higher engine power and digging force for tougher conditions.
If your primary concerns are power and deep digging capability, the XCMG XE250C GM may be the better choice, especially for heavy mining jobs. However, if you require a machine with higher gradeability for sloped terrains, the Sany SY225C-10HD GENe could be more suitable.
| Brand | XCMG Excavator | SANY Excavator |
|---|---|---|
| Type | Medium (15-25 Ton) | Medium (15-25 Ton) |
| Operating Cost | ₹ 76 - 80 Lakhs | ₹ 65-66 Lakhs |
| Price | ₹ 76 - 80 Lakhs | ₹ 65-66 Lakhs |
| Weight | 24500 kg | 22550 Kg |
| Bucket | 1.2 m³ | 1.2 m³ |
| Max Digging Depth | 6960 mm | 6037 mm |
| Engine | Isuzu 174.7 HP | Mitsubishi 158 HP |
| Warranty | 1 Yr. / 2500 hr. | 1 Yr. / 2500 hr. |
| Boom | 6000 mm | 5700 mm |
| Quick Overview: | The XE250C GM Excavator is built for tough granite, marble, and coal mining jobs. It has a 174.7 hp Isuzu engine that provides strong performance, durability, and good fuel efficiency for heavy work. With an operating weight of 24,500 kg and a 1.2 m³ bucket, this XCMG excavator can easily manage abrasive materials and rough terrain. Its strong frame and effective hydraulics offer powerful digging force and accurate control. This XCMG 25-ton excavator is perfect for stone extraction and open-pit coal mining. It ensures high productivity, shorter cycle times, and reliable operation with little downtime. |
The Sany SY225C-10HD GENe medium excavator is efficient for earthmoving and heavy-duty construction featuring innovative technology. |
| Agency review | Get the best XCMG XE250C GM excavator price in India from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the Sany SY225C-10HD GENe Medium Excavator from authorized dealers. Contact us now for exclusive deals! |
Comparing the Sany SY225C-10HD GENe and the XCMG XE250C GM, both machines are equipped with diesel engines, standard AC cabins, and GPS systems for advanced operation. Sany targets efficiency with moderate engine power and superb gradeability, while XCMG provides higher engine power and digging force for tougher conditions.
If your primary concerns are power and deep digging capability, the XCMG XE250C GM may be the better choice, especially for heavy mining jobs. However, if you require a machine with higher gradeability for sloped terrains, the Sany SY225C-10HD GENe could be more suitable.
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Brand | |
| XCMG Excavator | SANY Excavator |
| Type | |
| Medium (15-25 Ton) | Medium (15-25 Ton) |
| Price | |
| ₹ 76 - 80 Lakhs | ₹ 65-66 Lakhs |
| Weight | |
| 24500 kg | 22550 Kg |
| Bucket | |
| 1.2 m³ | 1.2 m³ |
| Max Digging Depth | |
| 6960 mm | 6037 mm |
| Engine | |
| Isuzu 174.7 HP | Mitsubishi 158 HP |
| Warranty | |
| 1 Yr. / 2500 hr. | 1 Yr. / 2500 hr. |
| Boom | |
| 6000 mm | 5700 mm |
| Quick Overview: | |
The XE250C GM Excavator is built for tough granite, marble, and coal mining jobs. It has a 174.7 hp Isuzu engine that provides strong performance, durability, and good fuel efficiency for heavy work. With an operating weight of 24,500 kg and a 1.2 m³ bucket, this XCMG excavator can easily manage abrasive materials and rough terrain. Its strong frame and effective hydraulics offer powerful digging force and accurate control. This XCMG 25-ton excavator is perfect for stone extraction and open-pit coal mining. It ensures high productivity, shorter cycle times, and reliable operation with little downtime. |
The Sany SY225C-10HD GENe medium excavator is efficient for earthmoving and heavy-duty construction featuring innovative technology. |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Engine Make | Isuzu CC-6BG1TRP | Mitsubishi FUSO 4M50 |
| Fuel Tank | 400 L | 340 L |
| Engine Displacment | 6.5 L | 4.9 L |
| Under Carriage | 4445 mm | 4250 mm |
| Hydraulic System | 350 L | NA |
| Arm | 2960 mm | 2400 mm |
| Max Digging Reach | 10240 mm | 9312 mm |
| Fuel Consumption | 15-22 L/hour | NA |
| Overall Width | 2990 mm | 2980 mm |
| Overall Length | 10160 mm | 9575 mm |
| Bucket Digging Force | 185 kN | 152 kN |
| Tailswing Radius | 2955 mm | 2900 mm |
| Track Shoe Width | 600 mm | 600 mm |
| AC Cabin | Standard | Standard |
| GPS | Standard | Standard |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Engine Make | |
| Isuzu CC-6BG1TRP | Mitsubishi FUSO 4M50 |
| Fuel Tank | |
| 400 L | 340 L |
| Engine Displacment | |
| 6.5 L | 4.9 L |
| Under Carriage | |
| 4445 mm | 4250 mm |
| Hydraulic System | |
| 350 L | NA |
| Arm | |
| 2960 mm | 2400 mm |
| Max Digging Reach | |
| 10240 mm | 9312 mm |
| Fuel Consumption | |
| 15-22 L/hour | NA |
| Overall Width | |
| 2990 mm | 2980 mm |
| Overall Length | |
| 10160 mm | 9575 mm |
| Bucket Digging Force | |
| 185 kN | 152 kN |
| Tailswing Radius | |
| 2955 mm | 2900 mm |
| Track Shoe Width | |
| 600 mm | 600 mm |
| AC Cabin | |
| Standard | Standard |
| GPS | |
| Standard | Standard |
| 17435 | 3608 | |
| Model | Isuzu 174.7 HP | Mitsubishi 158 HP |
| Fuel | Diesel | Diesel |
| Type | 6 Cylinder; Turbocharged; Air to Air Intercooler | 4 Cylinder , CRDI , Electronic Injection |
| Rated Engine Power | 174.7 HP (130 kW) @ 2100 rpm | 158 HP (118 kW) @ 2000 rpm |
| Maximum Torque | 637 Nm @ 1800 rpm | 580 Nm @ 1600 rpm |
| Piston Displacement | 6.5 L | 4.9 L |
| Alternator | NA | 50A |
| Battery | 2 x 12V | 2 x 12V |
| Starting Motor | NA | 24V - 4.35 kW |
| 24V - 4.35 kW | 24V - 4.35 kW | |
| No of Top rollers | 2 | 2 |
| No of bottom rollers | 9 | 8 |
| Track Shoes (Each Side) | 49 | 47 |
| Track Guard | 2 | 1 |
| Track Shoe width | 600 mm | 600 mm |
| Ground bearing pressure | NA | 47.3 kPA |
| Track Tensioning | Grease | Grease |
| Gradeability | 35° | 70% (35°) |
| Travel Speed-Low | NA | 3.3 Km/h |
| Travel Speed-High | 6 Km/h | 5.4 Km/h |
| Max Tracking Force | 205 kN | 209 kN |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Hydraulic pump | 2 Variable Displacement Axial Piston Pumps | 2 Variable Displacement Axial Piston Pumps |
| Maximum Flow | 2 x 246 L/min | 2 x 260 L/min |
| Pilot Pump | Gear Pump | 1 Gear Pump |
| Implement Circuit | 34.4 MPa | 34.3 MPa |
| Swing Circuit | 25 MPa | 29.3 MPa |
| Travel circuit | 34.4 MPa | 34.3 MPa |
| Pilot circuit | 3.9 MPa | 3.9 MPa |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Travel | NA | 2 Axial Piston; Two Speed Motors with Oil Disk Brake Per Motor |
| Swing | NA | Axial Piston Motor with Oil Disc Brake; Hyd. Operated Automatically |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Fuel tank | 400 L | 340 L |
| Engine Coolant | 26 L | 29 L |
| Engine oil | 25 L | 22 L |
| Hydraulic system | 350 L | NA |
| Hydraulic tank | 240 L | 239 L |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Operating Weight | 24500 kg | 22550 Kg |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Boom length | 6000 mm | 5700 mm |
| Arm length | 2960 mm | 2400 mm |
| Max Digging Reach | 10240 mm | 9312 mm |
| Max Digging Reach on ground | NA | NA |
| Max digging depth | 6960 mm | 6037 mm |
| Max digging height | 9545 mm | 9113 mm |
| Max Dump Height | 6725 mm | 6252 mm |
| Max vertical wallcut depth | 6090 mm | NA |
| Min swing radius | 3850 mm | 3730 mm |
| Max Height at Min Swing radius | NA | 7680 mm |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | 185 kN | 152 kN |
| Arm Digging Force | 129 kN | 138 kN |
| Swing Speed | 12.1 rpm | 11 rpm |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | NA | NA |
| Approach Angle | NA | NA |
| Width | NA | NA |
| Height | NA | NA |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Bucket Capacity | 1.2 m³ | 1.2 m³ |
| XCMG XE250C GM | Sany SY225C-10HD GENe | |
| Overall Length | 10160 mm | 9575 mm |
| Overall width | 2990 mm | 2980 mm |
| Overall Height | 3100 mm | 2955 mm |
| Overall Height of Cab | 3100 mm | 3075 mm |
| Upper Width | 2830 mm | 2785 mm |
| Track Lengh on Ground | 3650 mm | 3445 mm |
| Undercarriage overall length | 4445 mm | 4250 mm |
| Tailswing radius | 2955 mm | 2900 mm |
| Min Ground clearance | 485 mm | 465 mm |
| Track gauge | 2390 mm | 2380 mm |
| Width over tracks | 2990 mm | NA |
| Track Height | 942 mm | NA |
| Counterweight Clearance | 1050 mm | NA |
| Track Shoe Width | 600 mm | 600 mm |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Model | |
| Isuzu 174.7 HP | Mitsubishi 158 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 6 Cylinder; Turbocharged; Air to Air Intercooler | 4 Cylinder , CRDI , Electronic Injection |
| Rated Engine Power | |
| 174.7 HP (130 kW) @ 2100 rpm | 158 HP (118 kW) @ 2000 rpm |
| Maximum Torque | |
| 637 Nm @ 1800 rpm | 580 Nm @ 1600 rpm |
| Piston Displacement | |
| 6.5 L | 4.9 L |
| Alternator | |
| NA | 50A |
| Battery | |
| 2 x 12V | 2 x 12V |
| Starting Motor | |
| NA | 24V - 4.35 kW |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| No of Top rollers | |
| 2 | 2 |
| No of bottom rollers | |
| 9 | 8 |
| Track Shoes (Each Side) | |
| 49 | 47 |
| Track Guard | |
| 2 | 1 |
| Track Shoe width | |
| 600 mm | 600 mm |
| Ground bearing pressure | |
| NA | 47.3 kPA |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 35° | 70% (35°) |
| Travel Speed-Low | |
| NA | 3.3 Km/h |
| Travel Speed-High | |
| 6 Km/h | 5.4 Km/h |
| Max Tracking Force | |
| 205 kN | 209 kN |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Hydraulic pump | |
| 2 Variable Displacement Axial Piston Pumps | 2 Variable Displacement Axial Piston Pumps |
| Maximum Flow | |
| 2 x 246 L/min | 2 x 260 L/min |
| Pilot Pump | |
| Gear Pump | 1 Gear Pump |
| Implement Circuit | |
| 34.4 MPa | 34.3 MPa |
| Swing Circuit | |
| 25 MPa | 29.3 MPa |
| Travel circuit | |
| 34.4 MPa | 34.3 MPa |
| Pilot circuit | |
| 3.9 MPa | 3.9 MPa |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Fuel tank | |
| 400 L | 340 L |
| Engine Coolant | |
| 26 L | 29 L |
| Engine oil | |
| 25 L | 22 L |
| Hydraulic system | |
| 350 L | NA |
| Hydraulic tank | |
| 240 L | 239 L |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Operating Weight | |
| 24500 kg | 22550 Kg |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Boom length | |
| 6000 mm | 5700 mm |
| Arm length | |
| 2960 mm | 2400 mm |
| Max Digging Reach | |
| 10240 mm | 9312 mm |
| Max Digging Reach on ground | |
| NA | NA |
| Max digging depth | |
| 6960 mm | 6037 mm |
| Max digging height | |
| 9545 mm | 9113 mm |
| Max Dump Height | |
| 6725 mm | 6252 mm |
| Max vertical wallcut depth | |
| 6090 mm | NA |
| Min swing radius | |
| 3850 mm | 3730 mm |
| Max Height at Min Swing radius | |
| NA | 7680 mm |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| 185 kN | 152 kN |
| Arm Digging Force | |
| 129 kN | 138 kN |
| Swing Speed | |
| 12.1 rpm | 11 rpm |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| NA | NA |
| Approach Angle | |
| NA | NA |
| Width | |
| NA | NA |
| Height | |
| NA | NA |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Bucket Capacity | |
| 1.2 m³ | 1.2 m³ |
| XCMG XE250C GM | Sany SY225C-10HD GENe |
|---|---|
| Overall Length | |
| 10160 mm | 9575 mm |
| Overall width | |
| 2990 mm | 2980 mm |
| Overall Height | |
| 3100 mm | 2955 mm |
| Overall Height of Cab | |
| 3100 mm | 3075 mm |
| Upper Width | |
| 2830 mm | 2785 mm |
| Track Lengh on Ground | |
| 3650 mm | 3445 mm |
| Undercarriage overall length | |
| 4445 mm | 4250 mm |
| Tailswing radius | |
| 2955 mm | 2900 mm |
| Min Ground clearance | |
| 485 mm | 465 mm |
| Track gauge | |
| 2390 mm | 2380 mm |
| Width over tracks | |
| 2990 mm | NA |
| Track Height | |
| 942 mm | NA |
| Counterweight Clearence | |
| 1050 mm | NA |
| Track Shoe Width | |
| 600 mm | 600 mm |
Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.



