Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | BEML BE75 | Sany SY80C-9 |
|---|
| Particulars | BEML BE75 | Sany SY80C-9 |
|---|
The BEML BE75 is a powerful and fuel-efficient excavator suitable for construction and landscaping, while the Sany SY80C-9 stands out with robust performance and modern features like AC cabin and GPS for construction and light earthmoving. Comparing the BEML BE75 and Sany SY80C-9 results in a trade-off between operator comfort and technological advancements, and specific job site requirements.
If operator comfort and advanced technology such as GPS are important, the Sany SY80C-9's optional AC cabin and standard GPS may be preferred. However, for applications requiring longer reach and potentially better performance on soft terrains, the BEML BE75 could be more suitable. Final selection should be based on the specific needs of the project at hand, with considerations for operator environment and efficiency.
| Brand | BEML | SANY |
|---|---|---|
| Type | Small (6-15 Ton) | Small (6-15 Ton) |
| Operating Cost | Price Available Soon | ₹ 32-33 Lakhs |
| Price | Price Available Soon | ₹ 32-33 Lakhs |
| Weight | 7500 Kg | 7920 Kg |
| Bucket | 0.3 m³ | 0.32 m³ |
| Max Digging Depth | 4090 mm | 4020 mm |
| Engine | Kirloskar 57 HP | Kubota 58 HP |
| Warranty | 1 Yr. / 2500 hr. | 1 Yr. / 2500 hr. |
| Boom | 3710 mm | 3720 mm |
| Quick Overview: | A compact yet powerful small excavator, BEML BE75 is appropriate for landscaping and construction while being fuel efficient. |
Best for construction and light earthmoving needs, the Sany SY80C-9 small excavator delivers robust performance. |
| Agency review | Get the best price for the BEML BE75 Small Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the Sany SY80C-9 Small Excavator from authorized dealers. Contact us now for exclusive deals! |
The BEML BE75 is a powerful and fuel-efficient excavator suitable for construction and landscaping, while the Sany SY80C-9 stands out with robust performance and modern features like AC cabin and GPS for construction and light earthmoving. Comparing the BEML BE75 and Sany SY80C-9 results in a trade-off between operator comfort and technological advancements, and specific job site requirements.
If operator comfort and advanced technology such as GPS are important, the Sany SY80C-9's optional AC cabin and standard GPS may be preferred. However, for applications requiring longer reach and potentially better performance on soft terrains, the BEML BE75 could be more suitable. Final selection should be based on the specific needs of the project at hand, with considerations for operator environment and efficiency.
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Brand | |
| BEML | SANY |
| Type | |
| Small (6-15 Ton) | Small (6-15 Ton) |
| Price | |
| Price Available Soon | ₹ 32-33 Lakhs |
| Weight | |
| 7500 Kg | 7920 Kg |
| Bucket | |
| 0.3 m³ | 0.32 m³ |
| Max Digging Depth | |
| 4090 mm | 4020 mm |
| Engine | |
| Kirloskar 57 HP | Kubota 58 HP |
| Warranty | |
| 1 Yr. / 2500 hr. | 1 Yr. / 2500 hr. |
| Boom | |
| 3710 mm | 3720 mm |
| Quick Overview: | |
A compact yet powerful small excavator, BEML BE75 is appropriate for landscaping and construction while being fuel efficient. |
Best for construction and light earthmoving needs, the Sany SY80C-9 small excavator delivers robust performance. |
| BEML BE75 | Sany SY80C-9 | |
| Engine Make | Kirloskar 4R1040 NA | Kubota V2607-DI-T-ES09 |
| Fuel Tank | 122 L | 150 L |
| Engine Displacment | 4.16 L | 2.615 L |
| Under Carriage | 2645 mm | 2820 mm |
| Hydraulic System | 100 L | 90 L |
| Arm | 1650 mm | 1620 mm |
| Max Digging Reach | 6385 mm | 6240 mm |
| Fuel Consumption | NA | 5 L/hour |
| Overall Width | 2280 mm | 2220 mm |
| Overall Length | 5850 mm | 6095 mm |
| Bucket Digging Force | 48.3 kN | 56 kN |
| Tailswing Radius | 1830 mm | 1800 mm |
| Track Shoe Width | 450 mm | 450 mm |
| AC Cabin | Not Available | Optional |
| GPS | Not Available | Standard |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Engine Make | |
| Kirloskar 4R1040 NA | Kubota V2607-DI-T-ES09 |
| Fuel Tank | |
| 122 L | 150 L |
| Engine Displacment | |
| 4.16 L | 2.615 L |
| Under Carriage | |
| 2645 mm | 2820 mm |
| Hydraulic System | |
| 100 L | 90 L |
| Arm | |
| 1650 mm | 1620 mm |
| Max Digging Reach | |
| 6385 mm | 6240 mm |
| Fuel Consumption | |
| NA | 5 L/hour |
| Overall Width | |
| 2280 mm | 2220 mm |
| Overall Length | |
| 5850 mm | 6095 mm |
| Bucket Digging Force | |
| 48.3 kN | 56 kN |
| Tailswing Radius | |
| 1830 mm | 1800 mm |
| Track Shoe Width | |
| 450 mm | 450 mm |
| AC Cabin | |
| Not Available | Optional |
| GPS | |
| Not Available | Standard |
| 3504 | 3601 | |
| Model | Kirloskar 57 HP | Kubota 58 HP |
| Fuel | Diesel | Diesel |
| Type | 4 stroke , Direct Injection and Naturally Aspirated/4 stroke , Direct Injection with Turbo Charger , Water Cooled | 4 Cylinder , inline , Water Cooled |
| Rated Engine Power | 57 HP (41.9 kW) @ 2000 rpm | 58 HP (43 kW) @ 2000 rpm |
| Maximum Torque | 272 Nm @ 1500 rpm / 300 Nm @ 1500 rpm | 225 Nm @ 1400 rpm |
| Piston Displacement | 4.16 L | 2.615 L |
| Alternator | 24V / 40A | NA |
| Battery | 2 x 12V , 75 Ah | 12 V System (2-12V) |
| Starting Motor | 24V | NA |
| NA | NA | |
| No of Top rollers | 1 | 1 |
| No of bottom rollers | 5 | 5 |
| Track Shoes (Each Side) | 40 | 39 |
| Track Guard | NA | NA |
| Track Shoe width | 450 mm | 450 mm |
| Ground bearing pressure | 31 kPa | 33 kPa |
| Track Tensioning | Grease | Grease |
| Gradeability | NA | 70% (35°) |
| Travel Speed-Low | 2.6 Km/h | 2.4 Km/h |
| Travel Speed-High | 4.4 Km/h | 4.4 Km/h |
| Max Tracking Force | 55.7 kN | 58 kN |
| BEML BE75 | Sany SY80C-9 | |
| Hydraulic pump | Variable displacement axial piston pump | Variable Displacement Axial Piston Pumps |
| Maximum Flow | 144 + 72 L/min | 149 L/min |
| Pilot Pump | Gear Pump | Gear Pump |
| Implement Circuit | 24.5 MPa | 28.0 MPa |
| Swing Circuit | 12.5 MPa | 23.5 MPa |
| Travel circuit | 24.5 MPa | 26.3 MPa |
| Pilot circuit | NA | 3.5 MPa |
| BEML BE75 | Sany SY80C-9 | |
| Travel | 2 Nos. of two speed axial piston motors with built-in counter balance valves | 2 Axial Piston Motor With Parking Brake |
| Swing | 1 no. axial piston motor | 1 Axial Piston Motor with Swing Brake |
| BEML BE75 | Sany SY80C-9 | |
| Fuel tank | 122 L | 150 L |
| Engine Coolant | 10 L | 12 L |
| Engine oil | 9.5 L | 10 L |
| Hydraulic system | 100 L | 90 L |
| Hydraulic tank | 60 L | 120 L |
| BEML BE75 | Sany SY80C-9 | |
| Operating Weight | 7500 Kg | 7920 Kg |
| BEML BE75 | Sany SY80C-9 | |
| Boom length | 3710 mm | 3720 mm |
| Arm length | 1650 mm | 1620 mm |
| Max Digging Reach | 6385 mm | 6240 mm |
| Max Digging Reach on ground | 6225 mm | NA |
| Max digging depth | 4090 mm | 4020 mm |
| Max digging height | 7120 mm | 7060 mm |
| Max Dump Height | 4995 mm | 5155 mm |
| Max vertical wallcut depth | 3580 mm | 3290 mm |
| Min swing radius | NA | 1720 mm |
| Max Height at Min Swing radius | NA | 5550 mm |
| Max height (above ground) | NA | 350 mm |
| Dig depth (below ground) | NA | 360 mm |
| Bucket Digging Force | 48.3 kN | 56 kN |
| Arm Digging Force | 37.4 kN | 38 kN |
| Swing Speed | 11.8 rpm | 11.5 rpm |
| BEML BE75 | Sany SY80C-9 | |
| Dozer Type | NA | NA |
| Dozer Length | 1321 mm | NA |
| Digging depth for ground level | 436 mm | NA |
| Approach Angle | NA | NA |
| Width | 2250 mm | NA |
| Height | 455 mm | 405 mm |
| BEML BE75 | Sany SY80C-9 | |
| Bucket Capacity | 0.3 m³ | 0.32 m³ |
| BEML BE75 | Sany SY80C-9 | |
| Overall Length | 5850 mm | 6095 mm |
| Overall width | 2280 mm | 2220 mm |
| Overall Height | 2615 mm | 2610 mm |
| Overall Height of Cab | 2495 mm | NA |
| Upper Width | NA | 2040 mm |
| Track Lengh on Ground | 2060 mm | 2195 mm |
| Undercarriage overall length | 2645 mm | 2820 mm |
| Tailswing radius | 1830 mm | 1800 mm |
| Min Ground clearance | 405 mm | 380 mm |
| Track gauge | 1700 mm | 1750 mm |
| Width over tracks | NA | 2040 mm |
| Track Height | 680 mm | NA |
| Counterweight Clearance | 760 mm | NA |
| Track Shoe Width | 450 mm | 450 mm |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Model | |
| Kirloskar 57 HP | Kubota 58 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 4 stroke , Direct Injection and Naturally Aspirated/4 stroke , Direct Injection with Turbo Charger , Water Cooled | 4 Cylinder , inline , Water Cooled |
| Rated Engine Power | |
| 57 HP (41.9 kW) @ 2000 rpm | 58 HP (43 kW) @ 2000 rpm |
| Maximum Torque | |
| 272 Nm @ 1500 rpm / 300 Nm @ 1500 rpm | 225 Nm @ 1400 rpm |
| Piston Displacement | |
| 4.16 L | 2.615 L |
| Alternator | |
| 24V / 40A | NA |
| Battery | |
| 2 x 12V , 75 Ah | 12 V System (2-12V) |
| Starting Motor | |
| 24V | NA |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| No of Top rollers | |
| 1 | 1 |
| No of bottom rollers | |
| 5 | 5 |
| Track Shoes (Each Side) | |
| 40 | 39 |
| Track Guard | |
| NA | NA |
| Track Shoe width | |
| 450 mm | 450 mm |
| Ground bearing pressure | |
| 31 kPa | 33 kPa |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| NA | 70% (35°) |
| Travel Speed-Low | |
| 2.6 Km/h | 2.4 Km/h |
| Travel Speed-High | |
| 4.4 Km/h | 4.4 Km/h |
| Max Tracking Force | |
| 55.7 kN | 58 kN |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Hydraulic pump | |
| Variable displacement axial piston pump | Variable Displacement Axial Piston Pumps |
| Maximum Flow | |
| 144 + 72 L/min | 149 L/min |
| Pilot Pump | |
| Gear Pump | Gear Pump |
| Implement Circuit | |
| 24.5 MPa | 28.0 MPa |
| Swing Circuit | |
| 12.5 MPa | 23.5 MPa |
| Travel circuit | |
| 24.5 MPa | 26.3 MPa |
| Pilot circuit | |
| NA | 3.5 MPa |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Fuel tank | |
| 122 L | 150 L |
| Engine Coolant | |
| 10 L | 12 L |
| Engine oil | |
| 9.5 L | 10 L |
| Hydraulic system | |
| 100 L | 90 L |
| Hydraulic tank | |
| 60 L | 120 L |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Operating Weight | |
| 7500 Kg | 7920 Kg |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Boom length | |
| 3710 mm | 3720 mm |
| Arm length | |
| 1650 mm | 1620 mm |
| Max Digging Reach | |
| 6385 mm | 6240 mm |
| Max Digging Reach on ground | |
| 6225 mm | NA |
| Max digging depth | |
| 4090 mm | 4020 mm |
| Max digging height | |
| 7120 mm | 7060 mm |
| Max Dump Height | |
| 4995 mm | 5155 mm |
| Max vertical wallcut depth | |
| 3580 mm | 3290 mm |
| Min swing radius | |
| NA | 1720 mm |
| Max Height at Min Swing radius | |
| NA | 5550 mm |
| Max height (above ground) | |
| NA | 350 mm |
| Dig depth (below ground) | |
| NA | 360 mm |
| Bucket Digging Force | |
| 48.3 kN | 56 kN |
| Arm Digging Force | |
| 37.4 kN | 38 kN |
| Swing Speed | |
| 11.8 rpm | 11.5 rpm |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| 1321 mm | NA |
| Digging depth for ground level | |
| 436 mm | NA |
| Approach Angle | |
| NA | NA |
| Width | |
| 2250 mm | NA |
| Height | |
| 455 mm | 405 mm |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Bucket Capacity | |
| 0.3 m³ | 0.32 m³ |
| BEML BE75 | Sany SY80C-9 |
|---|---|
| Overall Length | |
| 5850 mm | 6095 mm |
| Overall width | |
| 2280 mm | 2220 mm |
| Overall Height | |
| 2615 mm | 2610 mm |
| Overall Height of Cab | |
| 2495 mm | NA |
| Upper Width | |
| NA | 2040 mm |
| Track Lengh on Ground | |
| 2060 mm | 2195 mm |
| Undercarriage overall length | |
| 2645 mm | 2820 mm |
| Tailswing radius | |
| 1830 mm | 1800 mm |
| Min Ground clearance | |
| 405 mm | 380 mm |
| Track gauge | |
| 1700 mm | 1750 mm |
| Width over tracks | |
| NA | 2040 mm |
| Track Height | |
| 680 mm | NA |
| Counterweight Clearence | |
| 760 mm | NA |
| Track Shoe Width | |
| 450 mm | 450 mm |
© 2025 Desi Machines All rights reserved.
Designed & Developed by PromotEdge
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
