Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|
| Particulars | BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|
The ACE AX 124 Eco Master offers noteworthy fuel efficiency and performance with features like hydrostatic steering and wet disc brakes, aiming for reliability and control. On the other hand, the Bull CH76 Challenger stands out with its higher engine power, productivity-focused features like its load-sensing hydraulic system, and a greater breakout force, which provides an edge in heavy-duty operations.
If you prioritize fuel efficiency and need a dependable backhoe loader for standard tasks, the ACE AX 124 Eco Master is a good choice. However, if you're looking for high productivity with more power and advanced digging capabilities for larger or tougher projects, the Bull CH76 Challenger is recommended.
| Brand | Bull Backhoe Loader | ACE Backhoe loader |
|---|---|---|
| Type | 2WD | 2WD |
| Price | ₹ 28 - 30 Lakhs | ₹ 27-30 Lakhs |
| Engine | Ashok Leyland 55 HP | ACE 49.5 HP |
| Bucket | 0.26 m³ | 0.24 m³ |
| Shovel | 1.26 m³ | 1.1 m³ |
| Max Digging Depth | 4770 mm | 4250 mm |
| Max Dump Height | 2960 mm | 2760 mm |
| Weight | 8010 kg | 7910 Kg |
| Quick Overview: | The Bull CH76 Challenger Backhoe Loader has a 55 HP BSV turbocharged engine. It is built for high productivity and fuel efficiency in construction, roadwork, foundation digging, and agriculture projects. Its load-sensing hydraulic system provides strong digging power, smooth operation, and faster cycle times. It comes with multi-purpose attachments, like a 90° foundation bucket for precise trench finishing, which cuts down on manual labor. The heavy-duty design, comfortable cabin, and low maintenance costs make the CH76 a reliable and cost-effective choice for contractors. |
With enhanced fuel efficiency, the ACE AX 124 Eco Master backhoe loader delivers optimized performance, reduced emissions, and cost-effective operations on job sites. |
The ACE AX 124 Eco Master offers noteworthy fuel efficiency and performance with features like hydrostatic steering and wet disc brakes, aiming for reliability and control. On the other hand, the Bull CH76 Challenger stands out with its higher engine power, productivity-focused features like its load-sensing hydraulic system, and a greater breakout force, which provides an edge in heavy-duty operations.
If you prioritize fuel efficiency and need a dependable backhoe loader for standard tasks, the ACE AX 124 Eco Master is a good choice. However, if you're looking for high productivity with more power and advanced digging capabilities for larger or tougher projects, the Bull CH76 Challenger is recommended.
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Brand | |
| Bull Backhoe Loader | ACE Backhoe loader |
| Type | |
| 2WD | 2WD |
| Price | |
| ₹ 28 - 30 Lakhs | ₹ 27-30 Lakhs |
| Engine | |
| Ashok Leyland 55 HP | ACE 49.5 HP |
| Bucket | |
| 0.26 m³ | 0.24 m³ |
| Shovel | |
| 1.26 m³ | 1.1 m³ |
| Max Digging Depth | |
| 4770 mm | 4250 mm |
| Max Dump Height | |
| 2960 mm | 2760 mm |
| Weight | |
| 8010 kg | 7910 Kg |
| Quick Overview: | |
The Bull CH76 Challenger Backhoe Loader has a 55 HP BSV turbocharged engine. It is built for high productivity and fuel efficiency in construction, roadwork, foundation digging, and agriculture projects. Its load-sensing hydraulic system provides strong digging power, smooth operation, and faster cycle times. It comes with multi-purpose attachments, like a 90° foundation bucket for precise trench finishing, which cuts down on manual labor. The heavy-duty design, comfortable cabin, and low maintenance costs make the CH76 a reliable and cost-effective choice for contractors. |
With enhanced fuel efficiency, the ACE AX 124 Eco Master backhoe loader delivers optimized performance, reduced emissions, and cost-effective operations on job sites. |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Engine Make | Ashok Leyland H4CSE5520 BS-V | ACE-A50HT-BSIII. |
| Fuel Tank | 115 L | 150 L |
| Max Torque | 290 Nm @ 1200 RPM | 245 Nm @ 1200 RPM |
| Max Speed | 36 km/hr | 28 km/hr |
| Hydraulic System | NA | NA |
| Max Working Height | 5980 mm | 5470 mm |
| Excavator Max Lift Capacity | 1400 kg | NA |
| Loader Load Over Height | 4190 mm | 3790 mm |
| Overall Length | 7460 mm | 6200 mm |
| Wheel Base | NA | 2180 mm |
| Bucket Digging Force | 5936 kgf | NA |
| Shovel Breakout Force | 8183 kgf | NA |
| Warranty | 1 Year | 1 Year |
| AC Cabin | Optional | Optional |
| GPS | Standard | Standard |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Engine Make | |
| Ashok Leyland H4CSE5520 BS-V | ACE-A50HT-BSIII. |
| Fuel Tank | |
| 115 L | 150 L |
| Max Torque | |
| 290 Nm @ 1200 RPM | 245 Nm @ 1200 RPM |
| Max Speed | |
| 36 km/hr | 28 km/hr |
| Hydraulic System | |
| NA | NA |
| Max Working Height | |
| 5980 mm | 5470 mm |
| Excavator Max Lift Capacity | |
| 1400 kg | NA |
| Loader Load Over Height | |
| 4190 mm | 3790 mm |
| Overall Length | |
| 7460 mm | 6200 mm |
| Wheel Base | |
| NA | 2180 mm |
| Bucket Digging Force | |
| 5936 kgf | NA |
| Shovel Breakout Force | |
| 8183 kgf | NA |
| Warranty | |
| 1 Year | 1 Year |
| AC Cabin | |
| Optional | Optional |
| GPS | |
| Standard | Standard |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Model | Ashok Leyland 55 HP | ACE 49.5 HP |
| Type | BSV; Turbocharged; Diesel Engine | 4 Cylinder; water cooled Diesel Engine |
| Gross Power | 55 HP (40.5 kW) @ 2000 RPM | 49.5 HP (40 kW) @ 2200 RPM |
| Max Torque | 290 Nm @ 1200 RPM | 245 Nm @ 1200 RPM |
| Displacement | 3.84 L | NA |
| Battery | 12V / 150 Ah | 12V |
| Alternator | NA | Suitable Alternator |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Type | CARRARO - 2WD; Synchro-shuttle Transmission with; integral torque convertor | Specially designed cararo Transmission with optimized torque converted ratio |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Type | Power Steering | Hydrostatic steering for reliability and better control. |
| Working Pressure | NA | NA |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Inner Wheels Braked - Outside Loader Bucket | 9180 mm | 3500 mm |
| Inner Wheels Braked - Outside Wheels | 6370 mm | NA |
| Inner Wheels not Braked - Outside Loader Bucket | 11560 mm | 4400 mm |
| Inner Wheels not Braked - Outside Wheels | 8760 mm | NA |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Service | NA | Hydraulically actuated wet disc brakes at rear wheel with twin pedals in cabin for better control. |
| Parking | NA | Mechanically actuated disc brakes for parking. |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Front | 9.00 x 16 - 16PR | 9.00 - 16 - 16 PR |
| Rear | 16.9 x 28 - 12PR (Industrial) / 14 x 25 - 20PR (Heavy Duty) | 16.90 - 28 - 12 PR |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Forward- 1st gear | NA | NA |
| Reverse- 1st gear | NA | NA |
| Forward- 2nd gear | NA | NA |
| Reverse- 2nd gear | 9.3 km/hr | NA |
| Forward- 3rd gear | NA | NA |
| Reverse- 3rd gear | NA | NA |
| Forward- 4th gear | 36 km/hr | 28 km/hr |
| Reverse- 4th gear | NA | 28 km/hr |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Type | Load Sensing Variable Piston Pump | Variable Displacement Pump |
| Maximum Pump Flow | 108 L/min @ 2000 RPM | 99 L/min |
| System Pressure | 230 bar | 210 bar |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Rear Axle | NA | Rigid axle with CARRARO planetary drive 28.32 model for high performance. |
| Front Axle | NA | Steer Axle; centrally pivoted. |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Fuel Tank | 115 L | 150 L |
| Engine Coolant | NA | NA |
| Engine Oil | NA | 12 L |
| Hydraulic Tank | NA | 80 L |
| Hydraulic System | NA | NA |
| Transmission | NA | 17 L |
| Rear Axle | NA | 3 L |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Maximum Digging Depth | 4770 mm | 4250 mm |
| Reach-Ground Level to Rear Wheel Centre | 6770 mm | 6730 mm |
| Reach-Ground Level to Slew Centre | 5470 mm | 5500 mm |
| Reach at Full Height to Slew Centre | 2820 mm | 2780 mm |
| Side Reach to Centre Line of Machine | NA | 5590 mm |
| Maximum Working Height | 5980 mm | 5470 mm |
| Maximum Load Over Height | 4190 mm | 3790 mm |
| Bucket Rotation Angle | 201° | 175° |
| Bucket Digging force | 5936 kgf | NA |
| Arm Digging force | 3109 kgf | 3010 kgf |
| Maximum Lift Capacity | 1400 kg | NA |
| Standard Bucket Capacity | 0.26 m³ | 0.24 m³ |
| Standard Bucket Width | 2350 mm | NA |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Dump Height | 2960 mm | 2760 mm |
| Load Over Height | 3390 mm | 3340 mm |
| Pin Height | 3610 mm | 3630 mm |
| Pin Forward Reach | 420 mm | NA |
| Reach At Ground | 1600 mm | 1770 mm |
| Maximum Reach at Full Height | 1420 mm | 1220 mm |
| Max Reach Full Height Dumped | 1100 mm | 890 mm |
| Below Ground Level Dig Depth | 80 mm | 80 mm |
| Rollback at Ground | 50° | 44° |
| Dump Angle | 45° | 45° |
| Shovel Breakout Force | 8183 kgf | NA |
| Loader Arm Breakout Force | 5315 kgf | 4950 kgf |
| Maximum Payload | 2200 kg | 1800 kg |
| BULL CH76 Challenger | ACE AX 124 Eco Master | |
| Machine Weight | 8010 kg | 7910 kg |
| Overall Length | 7460 mm | 6200 mm |
| Wheelbase | NA | 2180 mm |
| Slew Centre to Rear Axle Centre | NA | NA |
| Minimum Ground Clearance | NA | 350 mm |
| Slew Ground Clearance | NA | 660 mm |
| Height of Cabin | NA | 2900 mm |
| Overall Height | 3490 mm | 3600 mm |
| Track Width-Rear | NA | 1500 mm |
| Track Width-Front | NA | 1840 mm |
| Width Over Bucket | 2350 mm | 2500 mm |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Model | |
| Ashok Leyland 55 HP | ACE 49.5 HP |
| Type | |
| BSV; Turbocharged; Diesel Engine | 4 Cylinder; water cooled Diesel Engine |
| Gross Power | |
| 55 HP (40.5 kW) @ 2000 RPM | 49.5 HP (40 kW) @ 2200 RPM |
| Max Torque | |
| 290 Nm @ 1200 RPM | 245 Nm @ 1200 RPM |
| Displacement | |
| 3.84 L | NA |
| Battery | |
| 12V / 150 Ah | 12V |
| Alternator | |
| NA | Suitable Alternator |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Type | |
| CARRARO - 2WD; Synchro-shuttle Transmission with; integral torque convertor | Specially designed cararo Transmission with optimized torque converted ratio |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Type | |
| Power Steering | Hydrostatic steering for reliability and better control. |
| Working Pressure | |
| NA | NA |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Inner Wheels Braked - Outside Loader Bucket | |
| 9180 mm | 3500 mm |
| Inner Wheels Braked - Outside Wheels | |
| 6370 mm | NA |
| Inner Wheels not Braked - Outside Loader Bucket | |
| 11560 mm | 4400 mm |
| Inner Wheels not Braked - Outside Wheels | |
| 8760 mm | NA |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Service | |
| NA | Hydraulically actuated wet disc brakes at rear wheel with twin pedals in cabin for better control. |
| Parking | |
| NA | Mechanically actuated disc brakes for parking. |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Front | |
| 9.00 x 16 - 16PR | 9.00 - 16 - 16 PR |
| Rear | |
| 16.9 x 28 - 12PR (Industrial) / 14 x 25 - 20PR (Heavy Duty) | 16.90 - 28 - 12 PR |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Forward- 1st gear | |
| NA | NA |
| Reverse- 1st gear | |
| NA | NA |
| Forward- 2nd gear | |
| NA | NA |
| Reverse- 2nd gear | |
| 9.3 km/hr | NA |
| Forward- 3rd gear | |
| NA | NA |
| Reverse- 3rd gear | |
| NA | NA |
| Forward- 4th gear | |
| 36 km/hr | 28 km/hr |
| Reverse- 4th gear | |
| NA | 28 km/hr |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Type | |
| Load Sensing Variable Piston Pump | Variable Displacement Pump |
| Maximum Pump Flow | |
| 108 L/min @ 2000 RPM | 99 L/min |
| System Pressure | |
| 230 bar | 210 bar |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Rear Axle | |
| NA | Rigid axle with CARRARO planetary drive 28.32 model for high performance. |
| Front Axle | |
| NA | Steer Axle; centrally pivoted. |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Fuel Tank | |
| 115 L | 150 L |
| Engine Coolant | |
| NA | NA |
| Engine Oil | |
| NA | 12 L |
| Hydraulic Tank | |
| NA | 80 L |
| Hydraulic System | |
| NA | NA |
| Transmission | |
| NA | 17 L |
| Rear Axle | |
| NA | 3 L |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Maximum Digging Depth | |
| 4770 mm | 4250 mm |
| Reach-Ground Level to Rear Wheel Centre | |
| 6770 mm | 6730 mm |
| Reach-Ground Level to Slew Centre | |
| 5470 mm | 5500 mm |
| Reach at Full Height to Slew Centre | |
| 2820 mm | 2780 mm |
| Side Reach to Centre Line of Machine | |
| NA | 5590 mm |
| Maximum Working Height | |
| 5980 mm | 5470 mm |
| Maximum Load Over Height | |
| 4190 mm | 3790 mm |
| Bucket Rotation Angle | |
| 201° | 175° |
| Bucket Digging force | |
| 5936 kgf | NA |
| Arm Digging force | |
| 3109 kgf | 3010 kgf |
| Maximum Lift Capacity | |
| 1400 kg | NA |
| Standard Bucket Capacity | |
| 0.26 m³ | 0.24 m³ |
| Standard Bucket Width | |
| 2350 mm | NA |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Dump Height | |
| 2960 mm | 2760 mm |
| Load Over Height | |
| 3390 mm | 3340 mm |
| Pin Height | |
| 3610 mm | 3630 mm |
| Pin Forward Reach | |
| 420 mm | NA |
| Reach At Ground | |
| 1600 mm | 1770 mm |
| Maximum Reach at Full Height | |
| 1420 mm | 1220 mm |
| Max Reach Full Height Dumped | |
| 1100 mm | 890 mm |
| Below Ground Level Dig Depth | |
| 80 mm | 80 mm |
| Rollback at Ground | |
| 50° | 44° |
| Dump Angle | |
| 45° | 45° |
| Shovel Breakout Force | |
| 8183 kgf | NA |
| Loader Arm Breakout Force | |
| 5315 kgf | 4950 kgf |
| Maximum Payload | |
| 2200 kg | 1800 kg |
| BULL CH76 Challenger | ACE AX 124 Eco Master |
|---|---|
| Machine Weight | |
| 8010 kg | 7910 kg |
| Overall Length | |
| 7460 mm | 6200 mm |
| Wheelbase | |
| NA | 2180 mm |
| Slew Centre to Rear Axle Centre | |
| NA | NA |
| Minimum Ground Clearance | |
| NA | 350 mm |
| Slew Ground Clearance | |
| NA | 660 mm |
| Height of Cabin | |
| NA | 2900 mm |
| Overall Height | |
| 3490 mm | 3600 mm |
| Track Width-Rear | |
| NA | 1500 mm |
| Track Width-Front | |
| NA | 1840 mm |
| Width Over Bucket | |
| 2350 mm | 2500 mm |
Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.