Liebherr L550 VS Liugong 856H MAX Wheel Loader

Price Available Soon^*

Liebherr L550

Engine

John Deere 228 HP
Bucket

3.4 m³
Weight

17750 kg
Fwd. Speed

40 km/h
Dump Height

3020 mm
Tripping Load

12430 kg

Medium (15-30 Ton)

₹ 65-85 Lakhs^*

Liugong 856H MAX

Engine

Yuchai 225 HP
Bucket

3.5 m³
Weight

18350 kg
Fwd. Speed

37 km/h
Dump Height

3015 mm
Tripping Load

13878 kg

Medium (15-30 Ton)

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

Key Highlights	Liebherr L550	Liugong 856H MAX

Liebherr L550 VS Liugong 856H MAX Wheel Loader

Liebherr L550

Price Available Soon

Liugong 856H MAX

₹ 65-85 Lakhs

Particulars	Liebherr L550	Liugong 856H MAX

Overview Summary

Comparing the Liugong 856H MAX and the Liebherr L550 reveals that while they're similar in many aspects such as engine power and payload capacity, there are notable differences in their hydraulics systems, maneuverability, and feature set. The Liugong 856H MAX has a higher hydraulic pump flow and a larger fuel capacity, while the Liebherr L550 boasts a superior ground clearance and a hydrostatic transmission.

Liugong 856H MAX

Pros:

Higher maximum engine power of 225 HP at 2000 rpm
Peak torque of 1200 Nm at low rpm (1300 rpm) suggesting good low-end grunt
Larger fuel tank capacity of 280 liters for extended operation intervals
Higher payload capacity at 5500 kg
Slightly higher tipping load for both straight (15877 kg) and full turn (13878 kg)
Maximum pump flow of hydraulic system is higher at 332 L/min, which may imply faster operational cycle times
Comes with standard GPS

Cons:

Heavier operating weight may affect fuel efficiency and maneuverability
Smaller bucket capacity by 0.1 m³ than the Liebherr L550
Turning radius is 150 mm more than Liebherr L550, potentially less maneuverable in tight spaces

Liebherr L550

Pros:

Engine power is comparably high at 228 HP, albeit at a higher rpm (2400 rpm)
Hydrostatic transmission could offer smoother and more precise control
Higher system pressure at 360 bar, which might translate to more effective hydraulic system performance
Possesses a higher ground clearance of 490 mm enhancing its suitability for rough terrain
Center pivot with oscillating ±13° rear axle could provide enhanced stability on uneven grounds
Optional GPS allows for customization based on user need

Cons:

Smaller fuel tank capacity at 300 liters may require more frequent refills
Lower peak torque of 890 Nm; may affect performance under load
Hydraulic pump flow is less compared to the Liugong 856H MAX, which might impact speed of operations
Bucket width information not provided; makes direct comparison of bucket capabilities challenging

Closing Recommendation

The final recommendation would depend on the specific needs of the user. If the priority is longer operational intervals with higher hydraulic performance, the Liugong 856H MAX may be the preferred option. However, for applications requiring precise control and stability on uneven terrain, the Liebherr L550 would be a better choice. Consider the operating environment, the type of material handling tasks, and the desired features like GPS when making the final decision.