Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|
| Particulars | Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|
When comparing the Tata Hitachi TMX 20 Neo and the XCMG XE28U mini excavators, the TMX 20 Neo offers a higher engine power and better fuel efficiency while the XE28U has a greater operating weight and hydraulic pump flow. Both models cater to similar market segments but differ in aspects such as bucket capacity and undercarriage.
The choice between Tata Hitachi TMX 20 Neo and XCMG XE28U should be based on the specific project requirements and priorities, such as power versus material handling capacity, and the importance of fuel efficiency versus cycle times.
| Brand | Tata Hitachi Excavator | XCMG Excavator |
|---|---|---|
| Type | Mini (0-6 Ton) | Mini (0-6 Ton) |
| Operating Cost | ₹ 22 - 23 Lakhs | ₹ 24.50-26.50 Lakhs |
| Price | ₹ 22 - 23 Lakhs | ₹ 24.50 - 26.50 Lakhs |
| Weight | 2300 Kg | 2780 Kg |
| Bucket | 0.04-0.07 m³ | 0.06 m³ |
| Max Digging Depth | 2323 mm | 2800 mm |
| Engine | Yanmar 27.4 HP | Kubota 21 HP |
| Warranty | 1 Yr. / 2000 hr. | 1 Yr. / 2500 hr. |
| Boom | 1900 mm | 2090 mm |
| Quick Overview: | Ideal for landscaping and small construction projects Tata Hitachi TMX 20 Neo mini excavator comes with precision and compact design. |
The XCMG XE28U mini excavator is a compact, high-performance machine designed for precision in tight job sites. It has an efficient engine that produces 24.8 to 28 hp and an operating weight of about 2,780 kg. The excavator uses a 0.08 to 0.12 cu.m bucket, providing powerful digging ability. Its reliable hydraulics and sturdy undercarriage ensure smooth control and good fuel efficiency. The XCMG XE28U is ideal for urban construction, landscaping, and utility trenching. It offers reliability, productivity, and strong overall value for contractors in India. |
| Agency review | Get the best price for the Tata Hitachi TMX 20 Neo Mini Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the XCMG XE28U Mini Excavator from authorized dealers. Contact us now for exclusive deals! |
When comparing the Tata Hitachi TMX 20 Neo and the XCMG XE28U mini excavators, the TMX 20 Neo offers a higher engine power and better fuel efficiency while the XE28U has a greater operating weight and hydraulic pump flow. Both models cater to similar market segments but differ in aspects such as bucket capacity and undercarriage.
The choice between Tata Hitachi TMX 20 Neo and XCMG XE28U should be based on the specific project requirements and priorities, such as power versus material handling capacity, and the importance of fuel efficiency versus cycle times.
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Brand | |
| Tata Hitachi Excavator | XCMG Excavator |
| Type | |
| Mini (0-6 Ton) | Mini (0-6 Ton) |
| Price | |
| ₹ 22 - 23 Lakhs | ₹ 24.50 - 26.50 Lakhs |
| Weight | |
| 2300 Kg | 2780 Kg |
| Bucket | |
| 0.04-0.07 m³ | 0.06 m³ |
| Max Digging Depth | |
| 2323 mm | 2800 mm |
| Engine | |
| Yanmar 27.4 HP | Kubota 21 HP |
| Warranty | |
| 1 Yr. / 2000 hr. | 1 Yr. / 2500 hr. |
| Boom | |
| 1900 mm | 2090 mm |
| Quick Overview: | |
Ideal for landscaping and small construction projects Tata Hitachi TMX 20 Neo mini excavator comes with precision and compact design. |
The XCMG XE28U mini excavator is a compact, high-performance machine designed for precision in tight job sites. It has an efficient engine that produces 24.8 to 28 hp and an operating weight of about 2,780 kg. The excavator uses a 0.08 to 0.12 cu.m bucket, providing powerful digging ability. Its reliable hydraulics and sturdy undercarriage ensure smooth control and good fuel efficiency. The XCMG XE28U is ideal for urban construction, landscaping, and utility trenching. It offers reliability, productivity, and strong overall value for contractors in India. |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Engine Make | Yanmar 3TNV88-BSTAH | Kubota D1105 |
| Fuel Tank | 37 L | 33 L |
| Engine Displacment | NA | 1.12 L |
| Under Carriage | 1730 mm | 1980 mm |
| Hydraulic System | 70 L | 35 L |
| Arm | 1000 mm | 1300 mm |
| Max Digging Reach | 4188 mm | 4750 mm |
| Fuel Consumption | 3.2 L/hour | NA |
| Overall Width | 1400 mm | 1500 mm |
| Overall Length | 4041 mm | 4190 mm |
| Bucket Digging Force | 18.5 kN | NA |
| Tailswing Radius | 675 mm | 790 mm |
| Track Shoe Width | 280 mm | 300 mm |
| AC Cabin | Not Available | Not Available |
| GPS | Not Available | Not Available |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Engine Make | |
| Yanmar 3TNV88-BSTAH | Kubota D1105 |
| Fuel Tank | |
| 37 L | 33 L |
| Engine Displacment | |
| NA | 1.12 L |
| Under Carriage | |
| 1730 mm | 1980 mm |
| Hydraulic System | |
| 70 L | 35 L |
| Arm | |
| 1000 mm | 1300 mm |
| Max Digging Reach | |
| 4188 mm | 4750 mm |
| Fuel Consumption | |
| 3.2 L/hour | NA |
| Overall Width | |
| 1400 mm | 1500 mm |
| Overall Length | |
| 4041 mm | 4190 mm |
| Bucket Digging Force | |
| 18.5 kN | NA |
| Tailswing Radius | |
| 675 mm | 790 mm |
| Track Shoe Width | |
| 280 mm | 300 mm |
| AC Cabin | |
| Not Available | Not Available |
| GPS | |
| Not Available | Not Available |
| 3618 | 3658 | |
| Model | Yanmar 27.4 HP | Kubota 21 HP |
| Fuel | Diesel | Diesel |
| Type | 3 Cylinder Water Cooled , Diesel , DL | 3 cylinder , four stroke water cooled |
| Rated Engine Power | 27.4 HP (20.4 kW) @ 2200 rpm | 21 HP (15.7 kW ) @ 2400 rpm |
| Maximum Torque | 108 Nm @ 1320 rpm | 70.3 Nm @ 1600 rpm |
| Piston Displacement | NA | 1.12 L |
| Alternator | NA | NA |
| Battery | 12V | 1 x 90 AH |
| Starting Motor | NA | NA |
| NA | NA | |
| No of Top rollers | 1x2 | 1 |
| No of bottom rollers | 3x2 | 3 |
| Track Shoes (Each Side) | 36x2 | 41 |
| Track Guard | NA | NA |
| Track Shoe width | 280 mm | 300 mm |
| Ground bearing pressure | 29.4 kPa | NA |
| Track Tensioning | Grease | Grease |
| Gradeability | 58 % (30°) | 30° |
| Travel Speed-Low | 0-1.64 Km/h | NA |
| Travel Speed-High | 3.27 Km/h | 3.1 Km/h |
| Max Tracking Force | NA | 29.7 kN |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Hydraulic pump | NA | 1 Variable Displacement Axial Piston Pump |
| Maximum Flow | 63.6 L/min | 1 x 82.8 L/min |
| Pilot Pump | One Gear Pump | NA |
| Implement Circuit | 14.7 MPa | 24.3 MPa |
| Swing Circuit | 14.2 MPa | 16.2 MPa |
| Travel circuit | 14.7 MPa | 19 MPa |
| Pilot circuit | 2.4 MPa | 3.5 MPa |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Travel | NA | NA |
| Swing | NA | NA |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Fuel tank | 37 L | 33 L |
| Engine Coolant | 7.5 L | 6.5 L |
| Engine oil | 6.7 L | 5.1 L |
| Hydraulic system | 70 L | 35 L |
| Hydraulic tank | 45 L | 22 L |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Operating Weight | 2300 Kg | 2780 Kg |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Boom length | 1900 mm | 2090 mm |
| Arm length | 1000 mm | 1300 mm |
| Max Digging Reach | 4188 mm | 4750 mm |
| Max Digging Reach on ground | 4040 mm | NA |
| Max digging depth | 2323 mm | 2800 mm |
| Max digging height | 3961 mm | 4390 mm |
| Max Dump Height | 2677 mm | 3120 mm |
| Max vertical wallcut depth | NA | 2310 mm |
| Min swing radius | 1828 mm | 1980 mm |
| Max Height at Min Swing radius | NA | NA |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | 18.5 kN | NA |
| Arm Digging Force | 12.7 kN | NA |
| Swing Speed | 11 rpm | 10 rpm |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | 367 mm | 610 mm / 585 mm |
| Approach Angle | NA | NA |
| Width | 1450 mm | NA |
| Height | 320 mm | NA |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Bucket Capacity | 0.04-0.07 m³ | 0.06 m³ |
| Tata Hitachi TMX 20 Neo | XCMG XE28U | |
| Overall Length | 4041 mm | 4190 mm |
| Overall width | 1400 mm | 1500 mm |
| Overall Height | NA | 2580 mm |
| Overall Height of Cab | 2368 mm | NA |
| Upper Width | 1350 mm | 1350 mm |
| Track Lengh on Ground | 1300 mm | 1560 mm |
| Undercarriage overall length | 1730 mm | 1980 mm |
| Tailswing radius | 675 mm | 790 mm |
| Min Ground clearance | 291 mm | 290 mm |
| Track gauge | 1120 mm | 1300 mm |
| Width over tracks | 1350 mm | 1500 mm |
| Track Height | NA | 457 mm |
| Counterweight Clearance | 610 mm | 535 mm |
| Track Shoe Width | 280 mm | 300 mm |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Model | |
| Yanmar 27.4 HP | Kubota 21 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 3 Cylinder Water Cooled , Diesel , DL | 3 cylinder , four stroke water cooled |
| Rated Engine Power | |
| 27.4 HP (20.4 kW) @ 2200 rpm | 21 HP (15.7 kW ) @ 2400 rpm |
| Maximum Torque | |
| 108 Nm @ 1320 rpm | 70.3 Nm @ 1600 rpm |
| Piston Displacement | |
| NA | 1.12 L |
| Alternator | |
| NA | NA |
| Battery | |
| 12V | 1 x 90 AH |
| Starting Motor | |
| NA | NA |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| No of Top rollers | |
| 1x2 | 1 |
| No of bottom rollers | |
| 3x2 | 3 |
| Track Shoes (Each Side) | |
| 36x2 | 41 |
| Track Guard | |
| NA | NA |
| Track Shoe width | |
| 280 mm | 300 mm |
| Ground bearing pressure | |
| 29.4 kPa | NA |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 58 % (30°) | 30° |
| Travel Speed-Low | |
| 0-1.64 Km/h | NA |
| Travel Speed-High | |
| 3.27 Km/h | 3.1 Km/h |
| Max Tracking Force | |
| NA | 29.7 kN |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Hydraulic pump | |
| NA | 1 Variable Displacement Axial Piston Pump |
| Maximum Flow | |
| 63.6 L/min | 1 x 82.8 L/min |
| Pilot Pump | |
| One Gear Pump | NA |
| Implement Circuit | |
| 14.7 MPa | 24.3 MPa |
| Swing Circuit | |
| 14.2 MPa | 16.2 MPa |
| Travel circuit | |
| 14.7 MPa | 19 MPa |
| Pilot circuit | |
| 2.4 MPa | 3.5 MPa |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Fuel tank | |
| 37 L | 33 L |
| Engine Coolant | |
| 7.5 L | 6.5 L |
| Engine oil | |
| 6.7 L | 5.1 L |
| Hydraulic system | |
| 70 L | 35 L |
| Hydraulic tank | |
| 45 L | 22 L |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Operating Weight | |
| 2300 Kg | 2780 Kg |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Boom length | |
| 1900 mm | 2090 mm |
| Arm length | |
| 1000 mm | 1300 mm |
| Max Digging Reach | |
| 4188 mm | 4750 mm |
| Max Digging Reach on ground | |
| 4040 mm | NA |
| Max digging depth | |
| 2323 mm | 2800 mm |
| Max digging height | |
| 3961 mm | 4390 mm |
| Max Dump Height | |
| 2677 mm | 3120 mm |
| Max vertical wallcut depth | |
| NA | 2310 mm |
| Min swing radius | |
| 1828 mm | 1980 mm |
| Max Height at Min Swing radius | |
| NA | NA |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| 18.5 kN | NA |
| Arm Digging Force | |
| 12.7 kN | NA |
| Swing Speed | |
| 11 rpm | 10 rpm |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| 367 mm | 610 mm / 585 mm |
| Approach Angle | |
| NA | NA |
| Width | |
| 1450 mm | NA |
| Height | |
| 320 mm | NA |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Bucket Capacity | |
| 0.04-0.07 m³ | 0.06 m³ |
| Tata Hitachi TMX 20 Neo | XCMG XE28U |
|---|---|
| Overall Length | |
| 4041 mm | 4190 mm |
| Overall width | |
| 1400 mm | 1500 mm |
| Overall Height | |
| NA | 2580 mm |
| Overall Height of Cab | |
| 2368 mm | NA |
| Upper Width | |
| 1350 mm | 1350 mm |
| Track Lengh on Ground | |
| 1300 mm | 1560 mm |
| Undercarriage overall length | |
| 1730 mm | 1980 mm |
| Tailswing radius | |
| 675 mm | 790 mm |
| Min Ground clearance | |
| 291 mm | 290 mm |
| Track gauge | |
| 1120 mm | 1300 mm |
| Width over tracks | |
| 1350 mm | 1500 mm |
| Track Height | |
| NA | 457 mm |
| Counterweight Clearence | |
| 610 mm | 535 mm |
| Track Shoe Width | |
| 280 mm | 300 mm |
Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.