Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|
| Particulars | XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|
When comparing the Tata Hitachi TMX 20 Neo and the XCMG XE28U mini excavators, the TMX 20 Neo offers a higher engine power and better fuel efficiency while the XE28U has a greater operating weight and hydraulic pump flow. Both models cater to similar market segments but differ in aspects such as bucket capacity and undercarriage.
The choice between Tata Hitachi TMX 20 Neo and XCMG XE28U should be based on the specific project requirements and priorities, such as power versus material handling capacity, and the importance of fuel efficiency versus cycle times.
| Brand | XCMG Excavator | Tata Hitachi Excavator |
|---|---|---|
| Type | Mini (0-6 Ton) | Mini (0-6 Ton) |
| Operating Cost | ₹ 24.50-26.50 Lakhs | ₹ 22 - 23 Lakhs |
| Price | ₹ 24.50 - 26.50 Lakhs | ₹ 22 - 23 Lakhs |
| Weight | 2780 Kg | 2300 Kg |
| Bucket | 0.06 m³ | 0.04-0.07 m³ |
| Max Digging Depth | 2800 mm | 2323 mm |
| Engine | Kubota 21 HP | Yanmar 27.4 HP |
| Warranty | 1 Yr. / 2500 hr. | 1 Yr. / 2000 hr. |
| Boom | 2090 mm | 1900 mm |
| Quick Overview: | The XCMG XE28U mini excavator is a compact, high-performance machine designed for precision in tight job sites. It has an efficient engine that produces 24.8 to 28 hp and an operating weight of about 2,780 kg. The excavator uses a 0.08 to 0.12 cu.m bucket, providing powerful digging ability. Its reliable hydraulics and sturdy undercarriage ensure smooth control and good fuel efficiency. The XCMG XE28U is ideal for urban construction, landscaping, and utility trenching. It offers reliability, productivity, and strong overall value for contractors in India. |
Ideal for landscaping and small construction projects Tata Hitachi TMX 20 Neo mini excavator comes with precision and compact design. |
| Agency review | Get the best price for the XCMG XE28U Mini Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the Tata Hitachi TMX 20 Neo Mini Excavator from authorized dealers. Contact us now for exclusive deals! |
When comparing the Tata Hitachi TMX 20 Neo and the XCMG XE28U mini excavators, the TMX 20 Neo offers a higher engine power and better fuel efficiency while the XE28U has a greater operating weight and hydraulic pump flow. Both models cater to similar market segments but differ in aspects such as bucket capacity and undercarriage.
The choice between Tata Hitachi TMX 20 Neo and XCMG XE28U should be based on the specific project requirements and priorities, such as power versus material handling capacity, and the importance of fuel efficiency versus cycle times.
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Brand | |
| XCMG Excavator | Tata Hitachi Excavator |
| Type | |
| Mini (0-6 Ton) | Mini (0-6 Ton) |
| Price | |
| ₹ 24.50 - 26.50 Lakhs | ₹ 22 - 23 Lakhs |
| Weight | |
| 2780 Kg | 2300 Kg |
| Bucket | |
| 0.06 m³ | 0.04-0.07 m³ |
| Max Digging Depth | |
| 2800 mm | 2323 mm |
| Engine | |
| Kubota 21 HP | Yanmar 27.4 HP |
| Warranty | |
| 1 Yr. / 2500 hr. | 1 Yr. / 2000 hr. |
| Boom | |
| 2090 mm | 1900 mm |
| Quick Overview: | |
The XCMG XE28U mini excavator is a compact, high-performance machine designed for precision in tight job sites. It has an efficient engine that produces 24.8 to 28 hp and an operating weight of about 2,780 kg. The excavator uses a 0.08 to 0.12 cu.m bucket, providing powerful digging ability. Its reliable hydraulics and sturdy undercarriage ensure smooth control and good fuel efficiency. The XCMG XE28U is ideal for urban construction, landscaping, and utility trenching. It offers reliability, productivity, and strong overall value for contractors in India. |
Ideal for landscaping and small construction projects Tata Hitachi TMX 20 Neo mini excavator comes with precision and compact design. |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Engine Make | Kubota D1105 | Yanmar 3TNV88-BSTAH |
| Fuel Tank | 33 L | 37 L |
| Engine Displacment | 1.12 L | NA |
| Under Carriage | 1980 mm | 1730 mm |
| Hydraulic System | 35 L | 70 L |
| Arm | 1300 mm | 1000 mm |
| Max Digging Reach | 4750 mm | 4188 mm |
| Fuel Consumption | NA | 3.2 L/hour |
| Overall Width | 1500 mm | 1400 mm |
| Overall Length | 4190 mm | 4041 mm |
| Bucket Digging Force | NA | 18.5 kN |
| Tailswing Radius | 790 mm | 675 mm |
| Track Shoe Width | 300 mm | 280 mm |
| AC Cabin | Not Available | Not Available |
| GPS | Not Available | Not Available |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Engine Make | |
| Kubota D1105 | Yanmar 3TNV88-BSTAH |
| Fuel Tank | |
| 33 L | 37 L |
| Engine Displacment | |
| 1.12 L | NA |
| Under Carriage | |
| 1980 mm | 1730 mm |
| Hydraulic System | |
| 35 L | 70 L |
| Arm | |
| 1300 mm | 1000 mm |
| Max Digging Reach | |
| 4750 mm | 4188 mm |
| Fuel Consumption | |
| NA | 3.2 L/hour |
| Overall Width | |
| 1500 mm | 1400 mm |
| Overall Length | |
| 4190 mm | 4041 mm |
| Bucket Digging Force | |
| NA | 18.5 kN |
| Tailswing Radius | |
| 790 mm | 675 mm |
| Track Shoe Width | |
| 300 mm | 280 mm |
| AC Cabin | |
| Not Available | Not Available |
| GPS | |
| Not Available | Not Available |
| 3658 | 3618 | |
| Model | Kubota 21 HP | Yanmar 27.4 HP |
| Fuel | Diesel | Diesel |
| Type | 3 cylinder , four stroke water cooled | 3 Cylinder Water Cooled , Diesel , DL |
| Rated Engine Power | 21 HP (15.7 kW ) @ 2400 rpm | 27.4 HP (20.4 kW) @ 2200 rpm |
| Maximum Torque | 70.3 Nm @ 1600 rpm | 108 Nm @ 1320 rpm |
| Piston Displacement | 1.12 L | NA |
| Alternator | NA | NA |
| Battery | 1 x 90 AH | 12V |
| Starting Motor | NA | NA |
| NA | NA | |
| No of Top rollers | 1 | 1x2 |
| No of bottom rollers | 3 | 3x2 |
| Track Shoes (Each Side) | 41 | 36x2 |
| Track Guard | NA | NA |
| Track Shoe width | 300 mm | 280 mm |
| Ground bearing pressure | NA | 29.4 kPa |
| Track Tensioning | Grease | Grease |
| Gradeability | 30° | 58 % (30°) |
| Travel Speed-Low | NA | 0-1.64 Km/h |
| Travel Speed-High | 3.1 Km/h | 3.27 Km/h |
| Max Tracking Force | 29.7 kN | NA |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Hydraulic pump | 1 Variable Displacement Axial Piston Pump | NA |
| Maximum Flow | 1 x 82.8 L/min | 63.6 L/min |
| Pilot Pump | NA | One Gear Pump |
| Implement Circuit | 24.3 MPa | 14.7 MPa |
| Swing Circuit | 16.2 MPa | 14.2 MPa |
| Travel circuit | 19 MPa | 14.7 MPa |
| Pilot circuit | 3.5 MPa | 2.4 MPa |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Travel | NA | NA |
| Swing | NA | NA |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Fuel tank | 33 L | 37 L |
| Engine Coolant | 6.5 L | 7.5 L |
| Engine oil | 5.1 L | 6.7 L |
| Hydraulic system | 35 L | 70 L |
| Hydraulic tank | 22 L | 45 L |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Operating Weight | 2780 Kg | 2300 Kg |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Boom length | 2090 mm | 1900 mm |
| Arm length | 1300 mm | 1000 mm |
| Max Digging Reach | 4750 mm | 4188 mm |
| Max Digging Reach on ground | NA | 4040 mm |
| Max digging depth | 2800 mm | 2323 mm |
| Max digging height | 4390 mm | 3961 mm |
| Max Dump Height | 3120 mm | 2677 mm |
| Max vertical wallcut depth | 2310 mm | NA |
| Min swing radius | 1980 mm | 1828 mm |
| Max Height at Min Swing radius | NA | NA |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | NA | 18.5 kN |
| Arm Digging Force | NA | 12.7 kN |
| Swing Speed | 10 rpm | 11 rpm |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | 610 mm / 585 mm | 367 mm |
| Approach Angle | NA | NA |
| Width | NA | 1450 mm |
| Height | NA | 320 mm |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Bucket Capacity | 0.06 m³ | 0.04-0.07 m³ |
| XCMG XE28U | Tata Hitachi TMX 20 Neo | |
| Overall Length | 4190 mm | 4041 mm |
| Overall width | 1500 mm | 1400 mm |
| Overall Height | 2580 mm | NA |
| Overall Height of Cab | NA | 2368 mm |
| Upper Width | 1350 mm | 1350 mm |
| Track Lengh on Ground | 1560 mm | 1300 mm |
| Undercarriage overall length | 1980 mm | 1730 mm |
| Tailswing radius | 790 mm | 675 mm |
| Min Ground clearance | 290 mm | 291 mm |
| Track gauge | 1300 mm | 1120 mm |
| Width over tracks | 1500 mm | 1350 mm |
| Track Height | 457 mm | NA |
| Counterweight Clearance | 535 mm | 610 mm |
| Track Shoe Width | 300 mm | 280 mm |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Model | |
| Kubota 21 HP | Yanmar 27.4 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 3 cylinder , four stroke water cooled | 3 Cylinder Water Cooled , Diesel , DL |
| Rated Engine Power | |
| 21 HP (15.7 kW ) @ 2400 rpm | 27.4 HP (20.4 kW) @ 2200 rpm |
| Maximum Torque | |
| 70.3 Nm @ 1600 rpm | 108 Nm @ 1320 rpm |
| Piston Displacement | |
| 1.12 L | NA |
| Alternator | |
| NA | NA |
| Battery | |
| 1 x 90 AH | 12V |
| Starting Motor | |
| NA | NA |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| No of Top rollers | |
| 1 | 1x2 |
| No of bottom rollers | |
| 3 | 3x2 |
| Track Shoes (Each Side) | |
| 41 | 36x2 |
| Track Guard | |
| NA | NA |
| Track Shoe width | |
| 300 mm | 280 mm |
| Ground bearing pressure | |
| NA | 29.4 kPa |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 30° | 58 % (30°) |
| Travel Speed-Low | |
| NA | 0-1.64 Km/h |
| Travel Speed-High | |
| 3.1 Km/h | 3.27 Km/h |
| Max Tracking Force | |
| 29.7 kN | NA |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Hydraulic pump | |
| 1 Variable Displacement Axial Piston Pump | NA |
| Maximum Flow | |
| 1 x 82.8 L/min | 63.6 L/min |
| Pilot Pump | |
| NA | One Gear Pump |
| Implement Circuit | |
| 24.3 MPa | 14.7 MPa |
| Swing Circuit | |
| 16.2 MPa | 14.2 MPa |
| Travel circuit | |
| 19 MPa | 14.7 MPa |
| Pilot circuit | |
| 3.5 MPa | 2.4 MPa |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Fuel tank | |
| 33 L | 37 L |
| Engine Coolant | |
| 6.5 L | 7.5 L |
| Engine oil | |
| 5.1 L | 6.7 L |
| Hydraulic system | |
| 35 L | 70 L |
| Hydraulic tank | |
| 22 L | 45 L |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Operating Weight | |
| 2780 Kg | 2300 Kg |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Boom length | |
| 2090 mm | 1900 mm |
| Arm length | |
| 1300 mm | 1000 mm |
| Max Digging Reach | |
| 4750 mm | 4188 mm |
| Max Digging Reach on ground | |
| NA | 4040 mm |
| Max digging depth | |
| 2800 mm | 2323 mm |
| Max digging height | |
| 4390 mm | 3961 mm |
| Max Dump Height | |
| 3120 mm | 2677 mm |
| Max vertical wallcut depth | |
| 2310 mm | NA |
| Min swing radius | |
| 1980 mm | 1828 mm |
| Max Height at Min Swing radius | |
| NA | NA |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| NA | 18.5 kN |
| Arm Digging Force | |
| NA | 12.7 kN |
| Swing Speed | |
| 10 rpm | 11 rpm |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| 610 mm / 585 mm | 367 mm |
| Approach Angle | |
| NA | NA |
| Width | |
| NA | 1450 mm |
| Height | |
| NA | 320 mm |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Bucket Capacity | |
| 0.06 m³ | 0.04-0.07 m³ |
| XCMG XE28U | Tata Hitachi TMX 20 Neo |
|---|---|
| Overall Length | |
| 4190 mm | 4041 mm |
| Overall width | |
| 1500 mm | 1400 mm |
| Overall Height | |
| 2580 mm | NA |
| Overall Height of Cab | |
| NA | 2368 mm |
| Upper Width | |
| 1350 mm | 1350 mm |
| Track Lengh on Ground | |
| 1560 mm | 1300 mm |
| Undercarriage overall length | |
| 1980 mm | 1730 mm |
| Tailswing radius | |
| 790 mm | 675 mm |
| Min Ground clearance | |
| 290 mm | 291 mm |
| Track gauge | |
| 1300 mm | 1120 mm |
| Width over tracks | |
| 1500 mm | 1350 mm |
| Track Height | |
| 457 mm | NA |
| Counterweight Clearence | |
| 535 mm | 610 mm |
| Track Shoe Width | |
| 300 mm | 280 mm |
Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.