Click to view details
Desi Machines: Your One-Stop Solution for Heavy Machinery, Comparison, and Unbeatable Deals!

Contact Us

Contact Info

Fine FMG 180 VS CASE 845C Motor Grader

Fine FMG 180
  • Engine
    Ashok Leyland 180 HP
  • Blade
    3360 mm
  • Weight
    14500 kg
  • Turning Radius
    7500 mm
  • Max Forward Speed
    44.9 km/hr
  • Max Reverse Speed
    30.55 km/hr
₹ 89-91 Lakhs*
Medium (12-20 Ton)
CASE 845C
  • Engine
    FPT 150 HP
  • Blade
    3962 mm
  • Weight
    14373 kg
  • Turning Radius
    7250 mm
  • Max Forward Speed
    42.8 km/hr
  • Max Reverse Speed
    27.7 km/hr
₹ 1.33-1.35 Crore*
Medium (12-20 Ton)

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

Key Highlights Fine FMG 180CASE 845C
Fine FMG 180 VS CASE 845C Motor Grader
Fine FMG 180 Motor grader, Fine FMG 180 price, Fine FMG 180 specification, Fine FMG 180 price in india
Fine FMG 180
₹ 89-91 Lakhs
CASE 845C Motor grader, CASE 845C price, CASE 845C specification, CASE 845C price in india
CASE 845C
₹ 1.33-1.35 Crore
Particulars Fine FMG 180 CASE 845C
Overview Summary

The CASE 845C and Fine FMG 180 are two formidable motor graders for a wide range of construction and road building tasks. The 845C comes with a robust FPT engine and larger blade, whereas the FMG 180 stands out with its powerful Ashok Leyland engine and standard inclusions of AC Cabin and GPS.

CASE 845C Motor Grader

Pros:
  • Electronic common rail fuel system enhances efficiency
  • Higher capacity fuel tank (380 L) for extended operating hours
  • Features an advanced FPT engine with a strong 150 HP power
  • Powershift electronic shift change control offers smooth transmission
  • Heavy-duty front and rear axles suitable for tough conditions
  • Blade length of 3962 mm is adequate for various grading applications
  • Option for AC Cabin and GPS
Cons:
  • Optional AC Cabin where competitors may offer it as standard
  • Lower maximum forward speed compared to Fine FMG 180
  • May be pricier with a range of ₹ 1.33-1.35 Crore

Fine FMG 180 Motor Grader

Pros:
  • Powerful 180 HP Ashok Leyland engine
  • Slightly higher forward and reverse speeds
  • Equipped with AC Cabin and GPS as standard features
  • Hydraulic steering supports easier maneuverability
  • Competitive price range of ₹ 89-91 Lakhs
Cons:
  • Lower fuel tank capacity (280 L) compared to CASE 845C
  • Blade length of 3360 mm might limit some grading tasks
  • Dual pump system with lower maximum pump flow of 70 L/min

Pros:
Cons:

Closing Recommendation

When deciding between the CASE 845C and Fine FMG 180, consider the size and nature of your projects. For more extensive and challenging grading jobs that require a larger fuel capacity and blade, the CASE 845C may be the better choice. On the other hand, if you prefer a motor grader with higher horsepower and amenities like AC and GPS included as standard, all at a more competitive price, the Fine FMG 180 should be your pick.

Price, Technical Specifications & Features

Brand Fine Equipments CASE
Type Medium (12-20 Ton) Medium (12-20 Ton)
Price ₹ 89-91 Lakhs ₹ 1.33-1.35 Crore
Engine Ashok Leyland 180 HP FPT 150 HP
Weight 14500 kg 14373 kg
Min. Turning Radius 7500 mm 7250 mm
Max. Forward Speed 44.9 km/hr 42.8 km/hr
Max. Reverse Speed 30.55 km/hr 27.7 km/hr
Quick Overview:

The FMG 180 motor grader provides optimal torque and control for large-scale road building projects, offering consistent accuracy and performance in every task.

CASE 845C motor grader adapts effortlessly to different site conditions, providing rugged reliability and precise grading for a variety of applications.
Overview Summary

The CASE 845C and Fine FMG 180 are two formidable motor graders for a wide range of construction and road building tasks. The 845C comes with a robust FPT engine and larger blade, whereas the FMG 180 stands out with its powerful Ashok Leyland engine and standard inclusions of AC Cabin and GPS.

CASE 845C Motor Grader

Pros:
  • Electronic common rail fuel system enhances efficiency
  • Higher capacity fuel tank (380 L) for extended operating hours
  • Features an advanced FPT engine with a strong 150 HP power
  • Powershift electronic shift change control offers smooth transmission
  • Heavy-duty front and rear axles suitable for tough conditions
  • Blade length of 3962 mm is adequate for various grading applications
  • Option for AC Cabin and GPS
Cons:
  • Optional AC Cabin where competitors may offer it as standard
  • Lower maximum forward speed compared to Fine FMG 180
  • May be pricier with a range of ₹ 1.33-1.35 Crore

Fine FMG 180 Motor Grader

Pros:
  • Powerful 180 HP Ashok Leyland engine
  • Slightly higher forward and reverse speeds
  • Equipped with AC Cabin and GPS as standard features
  • Hydraulic steering supports easier maneuverability
  • Competitive price range of ₹ 89-91 Lakhs
Cons:
  • Lower fuel tank capacity (280 L) compared to CASE 845C
  • Blade length of 3360 mm might limit some grading tasks
  • Dual pump system with lower maximum pump flow of 70 L/min

Pros:
Cons:

Closing Recommendation

When deciding between the CASE 845C and Fine FMG 180, consider the size and nature of your projects. For more extensive and challenging grading jobs that require a larger fuel capacity and blade, the CASE 845C may be the better choice. On the other hand, if you prefer a motor grader with higher horsepower and amenities like AC and GPS included as standard, all at a more competitive price, the Fine FMG 180 should be your pick.

Price, Technical Specifications & Features

Fine FMG 180 CASE 845C
Brand
Fine Equipments CASE
Type
Medium (12-20 Ton) Medium (12-20 Ton)
Price
₹ 89-91 Lakhs ₹ 1.33-1.35 Crore
Engine
Ashok Leyland 180 HP FPT 150 HP
Weight
14500 kg 14373 kg
Min. Turning Radius
7500 mm 7250 mm
Max. Forward Speed
44.9 km/hr 42.8 km/hr
Max. Reverse Speed
30.55 km/hr 27.7 km/hr
Quick Overview:

The FMG 180 motor grader provides optimal torque and control for large-scale road building projects, offering consistent accuracy and performance in every task.

CASE 845C motor grader adapts effortlessly to different site conditions, providing rugged reliability and precise grading for a variety of applications.

Key Highlights

Fine FMG 180 CASE 845C
Engine Make Ashok Leyland H6C418022 BSIV FPT / F4HE613B*W002
Max Torque 700 Nm @ 1400-1700 rpm 659 Nm @ 1500 rpm
Fuel Tank 280 L 380 L
Hydraulic System 130 L 158 L
Tires 17.5 - 25 16 PR 14 x 24 12L-G2 Tubeless
Frame Height NA 298 mm
Max Lift Above Ground 400 mm 444.5 mm
Max Cutting Depth 500 mm NA
Blade Pitch Angle NA NA
Wheel Base 5958 mm 6219 mm
Overall Length 8500 mm 8957 mm
Overall Height 3400 mm 3200 mm / 3400 mm
Warranty 1 Yr. / 1000 hr. 1 Year
AC Cabin Standard Optional
GPS Standard Optional

Key Highlights

Fine FMG 180 CASE 845C
Engine Make
Ashok Leyland H6C418022 BSIV FPT / F4HE613B*W002
Max Torque
700 Nm @ 1400-1700 rpm 659 Nm @ 1500 rpm
Fuel Tank
280 L 380 L
Hydraulic System
130 L 158 L
Tires
17.5 - 25 16 PR 14 x 24 12L-G2 Tubeless
Frame Height
NA 298 mm
Max Lift Above Ground
400 mm 444.5 mm
Max Cutting Depth
500 mm NA
Blade Pitch Angle
NA NA
Wheel Base
5958 mm 6219 mm
Overall Length
8500 mm 8957 mm
Overall Height
3400 mm 3200 mm / 3400 mm
Warranty
1 Yr. / 1000 hr. 1 Year
AC Cabin
Standard Optional
GPS
Standard Optional

Specifications

Engine

Fine FMG 180 CASE 845C
Model Ashok Leyland 180 HP FPT 150 HP
Fuel Diesel Diesel
Type BSIV; Turbocharged Electronic common rail fuel system; Water cooled; 4 Cycle; Direct injection; Open combustion chamber; Turbocharged; Charge air cooled; Tier IV
Gross Power 180 HP (134 kW) @ 2200 rpm 150 HP (112 kW) @ 2200 rpm
Number Of Cylinders NA 6
Max Torque 700 Nm @ 1400-1700 rpm 659 Nm @ 1500 rpm
Displacement NA 6.7 L
Battery NA 24V / 2 x 100 Ah – low maintenance
Alternator NA BOSCH 24 V - 120A

Transmission

Fine FMG 180 CASE 845C
Type YD 13 - Power Shift Transmission Electrically Controlled Powershift electronic shift change control with torque converter and automatic lockup

Speed

Fine FMG 180 CASE 845C
Max. Forward Speed 44.9 km/hr 42.8 km/hr
Max. Reverse Speed 30.55 km/hr 27.7 km/hr

Axles

Fine FMG 180 CASE 845C
Rear Axle NA Conventional differential with brakes on 4 wheels and differential locking with electrohydraulic mechanism
Front Axle NA Heavy-duty; oscillating axle with wheel lean capability.

Tyres

Fine FMG 180 CASE 845C
Size 17.5 - 25 16 PR 14 x 24 12L-G2 Tubeless

Steering

Fine FMG 180 CASE 845C
Type Fully hydraulic steering Hydrostatic steering with integrated emergency system
Minimum Turning Radius 7500 mm 7250 mm
Steering-Angle 45° NA

Brakes

Fine FMG 180 CASE 845C
Service Disc (Front) Multidisk oil-bathed service brakes with nitrogen accumulator safety system
Parking Hub Brake Mechanically Operated Disk parking brake integrated into the transmission with warning light

Frame

Fine FMG 180 CASE 845C
Front Frame Height NA 298 mm
Front Frame Width NA 254 mm
Front Frame Thickness NA NA

MoldBoard

Fine FMG 180 CASE 845C
Type NA Hydraulic Type; Involute Curve
Blade Length 3360 mm 3962 mm
Blade Height 510 mm 622 mm
Blade Thickness 16 mm 22 mm
Cutting Edge NA 2 Interchangeable
Blade Pull NA NA
Blade Down Pressure NA NA
Moldboard Side Shift (Right/Left) NA 1257 mm / 1105 mm
Maximum Shoulder Reach (Right/Left) NA NA
Maximum Lift Above Ground 400 mm 444.5 mm
Maximum Cutting Depth 500 mm NA
Blade Pitch Angle NA NA

Hydraulics

Fine FMG 180 CASE 845C
Type Dual Pump Rexroth; load-sensing; pressure and flow compensated; variable displacement piston pump
Maximum Pump Flow 70 L/min 186 L/min
Maximum System Pressure 16 0.5 MPa NA

Service Capacities

Fine FMG 180 CASE 845C
Fuel Tank 280 L 380 L
Cooling System 30 L 16 L
Engine Oil 20 L 16/15 L
DEF Tank NA 60 L
Trasnsmission Oil 28 L 31 / 30 L
Final Drive 28 L NA
Hydraulic System 130 L 158 L
Circle Reverse Housing NA NA

Weight

Fine FMG 180 CASE 845C
Gross Vehicle Weight 14500 kg 14373 kg
Moldboard Base 2380 mm 2562 mm
Wheelbase 5958 mm 6219 mm
Tandem Wheelbase NA 1572 mm
Width of Standard Moldboard 3660 mm 3658 mm
Overall Length 8500 mm 8957 mm
Tread Gauge 2150 mm 2074 mm
Width of Tires 2600 mm 2527 mm
Articulation, left or right 8500 mm NA
Minimum Ground Clearence NA 380 mm / 580 mm

Specifications

Engine

Fine FMG 180 CASE 845C
Model
Ashok Leyland 180 HP FPT 150 HP
Fuel
Diesel Diesel
Type
BSIV; Turbocharged Electronic common rail fuel system; Water cooled; 4 Cycle; Direct injection; Open combustion chamber; Turbocharged; Charge air cooled; Tier IV
Gross Power
180 HP (134 kW) @ 2200 rpm 150 HP (112 kW) @ 2200 rpm
Number Of Cylinders
NA 6
Max Torque
700 Nm @ 1400-1700 rpm 659 Nm @ 1500 rpm
Displacement
NA 6.7 L
Battery
NA 24V / 2 x 100 Ah – low maintenance
Alternator
NA BOSCH 24 V - 120A

Speed

Fine FMG 180 CASE 845C
Max. Forward Speed
44.9 km/hr 42.8 km/hr
Max. Reverse Speed
30.55 km/hr 27.7 km/hr

Axles

Fine FMG 180 CASE 845C
Rear Axle
NA Conventional differential with brakes on 4 wheels and differential locking with electrohydraulic mechanism
Front Axle
NA Heavy-duty; oscillating axle with wheel lean capability.

Tyres

Fine FMG 180 CASE 845C
Size
17.5 - 25 16 PR 14 x 24 12L-G2 Tubeless

Steering

Fine FMG 180 CASE 845C
Type
Fully hydraulic steering Hydrostatic steering with integrated emergency system
Minimum Turning Radius
7500 mm 7250 mm
Steering-Angle
45° NA

Brakes

Fine FMG 180 CASE 845C
Service
Disc (Front) Multidisk oil-bathed service brakes with nitrogen accumulator safety system
Parking
Hub Brake Mechanically Operated Disk parking brake integrated into the transmission with warning light

Frame

Fine FMG 180 CASE 845C
Front Frame Height
NA 298 mm
Front Frame Width
NA 254 mm
Front Frame Thickness
NA NA

Moldboard

Fine FMG 180 CASE 845C
Type
NA Hydraulic Type; Involute Curve
Blade Length
3360 mm 3962 mm
Blade Height
510 mm 622 mm
Blade Thickness
16 mm 22 mm
Cutting Edge
NA 2 Interchangeable
Blade Pull
NA NA
Blade Down Pressure
NA NA
Moldboard Side Shift (Right/Left)
NA 1257 mm / 1105 mm
Maximum Shoulder Reach (Right/Left)
NA NA
Maximum Lift Above Ground
400 mm 444.5 mm
Maximum Cutting Depth
500 mm NA
Blade Pitch Angle
NA NA

Hydraulics

Fine FMG 180 CASE 845C
Type
Dual Pump Rexroth; load-sensing; pressure and flow compensated; variable displacement piston pump
Maximum Pump Flow
70 L/min 186 L/min
Maximum System Pressure
16 0.5 MPa NA

Service Capacities

Fine FMG 180 CASE 845C
Fuel Tank
280 L 380 L
Cooling System
30 L 16 L
Engine Oil
20 L 16/15 L
DEF Tank
NA 60 L
Trasnsmission Oil
28 L 31 / 30 L
Final Drive
28 L NA
Hydraulic System
130 L 158 L
Circle Reverse Housing
NA NA

Weight

Fine FMG 180 CASE 845C
Gross Vehicle Weight
14500 kg 14373 kg
Moldboard Base
2380 mm 2562 mm
Wheelbase
5958 mm 6219 mm
Tandem Wheelbase
NA 1572 mm
Width of Standard Moldboard
3660 mm 3658 mm
Overall Length
8500 mm 8957 mm
Tread Gauge
2150 mm 2074 mm
Width of Tires
2600 mm 2527 mm
Articulation, left or right
8500 mm NA
Minimum Ground Clearence
NA 380 mm / 580 mm

© 2025 Desi Machines All rights reserved.

Designed & Developed by PromotEdge

Help Us Reach You!

Let's get started

Disclaimer

Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

Compare


    Kindly fill out the below form. Our representative will get in touch with you