CASE 845C vs SDLG G9150Hi: the two differ on 70 of 79 listed specs. The main differences are Engine (FPT 150 HP vs Weichai 150 HP), Price (₹ 0.90-1.05 Crore vs ₹ 80-95 Lakhs), Max Torque (659 Nm @ 1500 rpm vs 720 Nm @ 1500 rpm), Weight (14373 kg vs 14000 kg). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 845C
SDLG G9150Hi
CASE 845C
VS
SDLG G9150Hi
Motor Grader
CASE 845C vs SDLG G9150Hi: the two differ on 70 of 79 listed specs. The main differences are Engine (FPT 150 HP vs Weichai 150 HP), Price (₹ 0.90-1.05 Crore vs ₹ 80-95 Lakhs), Max Torque (659 Nm @ 1500 rpm vs 720 Nm @ 1500 rpm), Weight (14373 kg vs 14000 kg). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
CASE 845C
₹ 0.90-1.05 Crore
SDLG G9150Hi
₹ 80-95 Lakhs
Particulars
CASE 845C
SDLG G9150Hi
CASE 845C vs SDLG G9150Hi: Which Motor Grader to Buy?
Both machines grade and level roads on construction and highway sites. The spec tables above give the exact numbers. Here is what matters when you decide. The CASE 845C runs a bigger 6-cylinder engine and carries a longer blade, so it can grade a wider strip in one pass. The SDLG G9150Hi uses a simpler 4-cylinder engine and comes with AC cabin and GPS built in, not as an add-on.
For a contractor running many machines, standard AC and GPS on the SDLG means less time spent fitting extras later, and GPS helps track the fleet. A road contractor doing wide highway work may prefer the CASE for its longer blade and higher power. Parts and service for both CASE and SDLG graders are available through dealer networks in India. See the full range of motor graders or read the motor grader buying guide before you decide.
CASE 845C
Pros:
Engine provides 150 HP power with a 6-cylinder configuration, which may result in smoother performance
Blade length of 3962 mm which could be beneficial for grading wider spans in a single pass
Maximum forward speed of 42.8 km/hr allowing for efficient operation
Turning radius of 7250 mm might offer good maneuverability
Alternative options for ground clearance (380 mm / 580 mm) could provide versatility for different working conditions
AC Cabin and GPS are optional, providing customization based on user requirements
Has both an emergency steering system and a nitrogen accumulator safety system for the service brakes
Cons:
Heavier gross vehicle weight of 14373 kg which could affect fuel efficiency
Lesser maximum reverse speed of 27.7 km/hr which might slow down operations when repositioning
Blade down pressure not specified, which makes it difficult to assess its performance on tough grading jobs
More complex engine design with 6 cylinders could entail higher maintenance costs
SDLG G9150Hi
Pros:
Features a 4-cylinder engine which could offer a balance between power and fuel efficiency
Blade down pressure is specified at 6271 kgf, indicating strong grading capability
Maximum cutting depth of 575 mm could enable deep excavation tasks
Has a slightly tighter turning radius of 6500 mm which may improve maneuverability
Equipped with AC Cabin and GPS as standard, enhancing operator comfort and machine usability
Energy-efficient CEV-V standard engine aiming at reduced emissions
Cons:
Lower blade length of 3658 mm that may require more passes for grading large areas
Slightly less maximum forward speed of 42 km/hr which could impact operational efficiency
Smaller engine displacement at 4.5 L might translate to lesser low-end torque
Maximum lift above ground is 380 mm which may limit the machine's capability in certain scenarios
Pros:
Cons:
Closing Recommendation
Both graders do the main job of grading and levelling roads well. The CASE 845C gives more power and a wider blade for bigger, wider jobs. The SDLG G9150Hi comes with AC cabin and GPS built in, and its simpler engine can mean lower upkeep costs. Think about the width of your job and how many machines you run, then check with your local dealer on service and finance. So match the machine to your work: CASE 845C for wide, high-power grading jobs, SDLG G9150Hi for standard-fit comfort and simpler upkeep.
CASE 845C Vs SDLG G9150Hi Motor Grader Price, Technical Specifications & Features
The CASE 845C Motor Grader is a versatile road grader machine in India. It is built for road construction, maintenance, and infrastructure work, performing reliably across various terrains. Powered by a 150 HP FPT turbocharged diesel engine, it delivers steady power with efficient fuel consumption. It adapts easily to different job conditions. The load-sensing hydraulic system ensures smooth blade movement, while the 3.96 m moldboard provides wider coverage and better finishing. It reduces the number of passes and improves productivity. The ZF powershift transmission (6F+3R) ensures smooth gear shifting, while the differential lock enhances traction on uneven ground, boosting stability and control. Built by CASE Construction Equipment, it guarantees durability and service support. The CASE 845C motor grader price in India is around ₹0.90–₹1.05 Cr. This CASE grader machine is ideal for contractors wanting efficient performance, low downtime, and reliable output.
The SDLG G9150Hi motor grader is a reliable option in India for road construction, land leveling, and grading tasks. It works well for contractors engaged in infrastructure, utilities, and mid-scale projects. It has a 150 HP CEV V-compliant engine that delivers strong output for subgrade work and road leveling. Its fuel-efficient design helps lower operating costs during extended work hours. With an operating weight of about 14 tons, this grader machine from SDLG Construction Equipment ensures stability across various terrains. A 3.65-meter moldboard allows for wider coverage with fewer passes, which improves productivity. The advanced hydraulic system offers precise blade control for better grading accuracy. The power-shift transmission enables smooth operation and effective power delivery. The operator cabin provides comfort, visibility, and user-friendly controls. The price of the SDLG G9150Hi motor grader in India is between ₹80 and ₹95 lakh. This motor grader represents a smart investment for buyers looking for cost-effective and reliable road construction equipment.
CASE 845C vs SDLG G9150Hi: Which Motor Grader to Buy?
Both machines grade and level roads on construction and highway sites. The spec tables above give the exact numbers. Here is what matters when you decide. The CASE 845C runs a bigger 6-cylinder engine and carries a longer blade, so it can grade a wider strip in one pass. The SDLG G9150Hi uses a simpler 4-cylinder engine and comes with AC cabin and GPS built in, not as an add-on.
For a contractor running many machines, standard AC and GPS on the SDLG means less time spent fitting extras later, and GPS helps track the fleet. A road contractor doing wide highway work may prefer the CASE for its longer blade and higher power. Parts and service for both CASE and SDLG graders are available through dealer networks in India. See the full range of motor graders or read the motor grader buying guide before you decide.
CASE 845C
Pros:
Engine provides 150 HP power with a 6-cylinder configuration, which may result in smoother performance
Blade length of 3962 mm which could be beneficial for grading wider spans in a single pass
Maximum forward speed of 42.8 km/hr allowing for efficient operation
Turning radius of 7250 mm might offer good maneuverability
Alternative options for ground clearance (380 mm / 580 mm) could provide versatility for different working conditions
AC Cabin and GPS are optional, providing customization based on user requirements
Has both an emergency steering system and a nitrogen accumulator safety system for the service brakes
Cons:
Heavier gross vehicle weight of 14373 kg which could affect fuel efficiency
Lesser maximum reverse speed of 27.7 km/hr which might slow down operations when repositioning
Blade down pressure not specified, which makes it difficult to assess its performance on tough grading jobs
More complex engine design with 6 cylinders could entail higher maintenance costs
SDLG G9150Hi
Pros:
Features a 4-cylinder engine which could offer a balance between power and fuel efficiency
Blade down pressure is specified at 6271 kgf, indicating strong grading capability
Maximum cutting depth of 575 mm could enable deep excavation tasks
Has a slightly tighter turning radius of 6500 mm which may improve maneuverability
Equipped with AC Cabin and GPS as standard, enhancing operator comfort and machine usability
Energy-efficient CEV-V standard engine aiming at reduced emissions
Cons:
Lower blade length of 3658 mm that may require more passes for grading large areas
Slightly less maximum forward speed of 42 km/hr which could impact operational efficiency
Smaller engine displacement at 4.5 L might translate to lesser low-end torque
Maximum lift above ground is 380 mm which may limit the machine's capability in certain scenarios
Pros:
Cons:
Closing Recommendation
Both graders do the main job of grading and levelling roads well. The CASE 845C gives more power and a wider blade for bigger, wider jobs. The SDLG G9150Hi comes with AC cabin and GPS built in, and its simpler engine can mean lower upkeep costs. Think about the width of your job and how many machines you run, then check with your local dealer on service and finance. So match the machine to your work: CASE 845C for wide, high-power grading jobs, SDLG G9150Hi for standard-fit comfort and simpler upkeep.
CASE 845C Vs SDLG G9150Hi Motor Grader Price, Technical Specifications & Features
The CASE 845C Motor Grader is a versatile road grader machine in India. It is built for road construction, maintenance, and infrastructure work, performing reliably across various terrains. Powered by a 150 HP FPT turbocharged diesel engine, it delivers steady power with efficient fuel consumption. It adapts easily to different job conditions. The load-sensing hydraulic system ensures smooth blade movement, while the 3.96 m moldboard provides wider coverage and better finishing. It reduces the number of passes and improves productivity. The ZF powershift transmission (6F+3R) ensures smooth gear shifting, while the differential lock enhances traction on uneven ground, boosting stability and control. Built by CASE Construction Equipment, it guarantees durability and service support. The CASE 845C motor grader price in India is around ₹0.90–₹1.05 Cr. This CASE grader machine is ideal for contractors wanting efficient performance, low downtime, and reliable output.
The SDLG G9150Hi motor grader is a reliable option in India for road construction, land leveling, and grading tasks. It works well for contractors engaged in infrastructure, utilities, and mid-scale projects. It has a 150 HP CEV V-compliant engine that delivers strong output for subgrade work and road leveling. Its fuel-efficient design helps lower operating costs during extended work hours. With an operating weight of about 14 tons, this grader machine from SDLG Construction Equipment ensures stability across various terrains. A 3.65-meter moldboard allows for wider coverage with fewer passes, which improves productivity. The advanced hydraulic system offers precise blade control for better grading accuracy. The power-shift transmission enables smooth operation and effective power delivery. The operator cabin provides comfort, visibility, and user-friendly controls. The price of the SDLG G9150Hi motor grader in India is between ₹80 and ₹95 lakh. This motor grader represents a smart investment for buyers looking for cost-effective and reliable road construction equipment.
70 differ · 9 identical
Key highlights: CASE 845C vs SDLG G9150Hi Motor Grader
CASE 845C
SDLG G9150Hi
Engine Make
FPT / F4HE613B*W002
Weichai WP4.6NG 140E635
Max Torque
659 Nm @ 1500 rpm
720 Nm @ 1500 rpm
Fuel Tank
380 L
NA
Hydraulic System
158 L
90 L
Tires
14 x 24 12L-G2 Tubeless
14 x 24 - 16PR
Frame Height
298 mm
NA
Max Lift Above Ground
444.5 mm
380 mm
Max Cutting Depth
NA
575 mm
Blade Pitch Angle
NA
90°
Wheel Base
6219 mm
6040 mm
Overall Length
8957 mm
8241 mm
Overall Height
3200 mm / 3400 mm
3235 mm
Warranty
1 Year
1 Yr. / 2000 hr.
AC Cabin
Optional
Standard
GPS
Optional
Standard
Key highlights: CASE 845C vs SDLG G9150Hi Motor Grader
CASE 845C
SDLG G9150Hi
Engine Make
FPT / F4HE613B*W002
Weichai WP4.6NG 140E635
Max Torque
659 Nm @ 1500 rpm
720 Nm @ 1500 rpm
Fuel Tank
380 L
NA
Hydraulic System
158 L
90 L
Tires
14 x 24 12L-G2 Tubeless
14 x 24 - 16PR
Frame Height
298 mm
NA
Max Lift Above Ground
444.5 mm
380 mm
Max Cutting Depth
NA
575 mm
Blade Pitch Angle
NA
90°
Wheel Base
6219 mm
6040 mm
Overall Length
8957 mm
8241 mm
Overall Height
3200 mm / 3400 mm
3235 mm
Warranty
1 Year
1 Yr. / 2000 hr.
AC Cabin
Optional
Standard
GPS
Optional
Standard
Full specifications: CASE 845C vs SDLG G9150Hi Motor Grader
Engine
CASE 845C
SDLG G9150Hi
Model
FPT 150 HP
Weichai 150 HP
Fuel
Diesel
Diesel
Type
Electronic common rail fuel system; Water cooled; 4 Cycle; Direct injection; Open combustion chamber; Turbocharged; Charge air cooled; Tier IV
CEV-V; In-line; Water-cooled; Four-stroke; Direct Injection
Gross Power
150 HP (112 kW) @ 2200 rpm
150 HP (111.8 kW) @ 2200 rpm
Number Of Cylinders
6
4
Max Torque
659 Nm @ 1500 rpm
720 Nm @ 1500 rpm
Displacement
6.7 L
4.5 L
Battery
24V / 2 x 100 Ah – low maintenance
24 V
Alternator
BOSCH 24 V - 120A
NA
Transmission
CASE 845C
SDLG G9150Hi
Type
Powershift electronic shift change control with torque converter and automatic lockup
Questions buyers ask about the CASE 845C vs SDLG G9150Hi
Ans.
The CASE 845C has more engine power, with a 6-cylinder engine rated at 150 HP. The SDLG G9150Hi uses a smaller 4-cylinder engine, which can mean lower fuel use on lighter grading jobs. Pick the CASE when you need more power for tough or wide grading work.
Ans.
The SDLG G9150Hi comes with AC cabin and GPS fitted as standard. On the CASE 845C, both are optional, so you pay extra to add them. Standard fittings save time and effort at the time of delivery.
Ans.
The CASE 845C suits wide road jobs better because its blade is longer, so it covers more ground in each pass. The SDLG G9150Hi has a shorter blade but still handles normal grading and finishing work well. Choose by the width of the job you do most.
Ans.
The SDLG G9150Hi may cost less to maintain because it runs a simpler 4-cylinder engine with fewer parts to service. The CASE 845C's 6-cylinder engine can mean higher service bills over time. Ask your local dealer about service cost before you buy.
Ans.
Yes, banks and finance companies give loans for both the CASE 845C and the SDLG G9150Hi. Your monthly payment depends on your down payment and credit record. Compare loan offers from a few lenders before you sign.
Ans.
The SDLG G9150Hi can suit a contractor running many machines well, since its standard GPS helps track each one across sites. The CASE 845C suits a company that needs a wider blade and more power on fewer, larger jobs. Match the choice to how you run your fleet.
CASE 845C Vs SDLG G9150Hi - Compare Price & Availability Across 600+ Locations in India
Compare CASE 845C Vs SDLG G9150Hi price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
