Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|
| Particulars | JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|
The JCB NXT 150 and Sany SY140C-9/9S Tunnel are closely matched excavators with slightly different offerings; the JCB boasts a higher bucket digging force and longer reach, while the Sany offers a bit more engine power, a longer warranty, and a two-speed tracking system.
The choice between JCB NXT 150 and Sany SY140C-9/9S Tunnel should be based on specific job requirements. If the primary need is for longer reach and higher digging forces, the JCB NXT 150 may be preferable. However, if the emphasis is on engine performance, tracking force, and faster movement across job sites, then the Sany SY140C-9/9S Tunnel would be the more apt choice.
| Brand | JCB | SANY |
|---|---|---|
| Type | Small (6-15 Ton) | Small (6-15 Ton) |
| Operating Cost | ₹ 50-52 Lakhs | ₹ 52-53 Lakhs |
| Price | ₹ 50-52 Lakhs | ₹ 52-53 Lakhs |
| Weight | 14700 Kg | 14260 Kg |
| Bucket | 0.75 m³ | 0.7 m³ |
| Max Digging Depth | 5210 mm | 3131 mm |
| Engine | Cummins 100 HP | Cummins 100.5 HP |
| Warranty | 1 Yr. / 2000 hr. | 1 Yr. / 2500 hr. |
| Boom | 4700 mm | 2900 mm |
| Quick Overview: | Featuring exceptional power and cost-effective performance, the JCB NXT 150 small excavator is used for construction and light engineering tasks. |
Featuring advanced technology for construction in tight and challenging tunneling conditions Sany’s SY140C-9/9S Tunnel small excavator is ideal. |
| Agency review | Get the best price for the JCB NXT 150 Small Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the Sany SY140C-9/9S TUNNEL Small Excavator from authorized dealers. Contact us now for exclusive deals! |
The JCB NXT 150 and Sany SY140C-9/9S Tunnel are closely matched excavators with slightly different offerings; the JCB boasts a higher bucket digging force and longer reach, while the Sany offers a bit more engine power, a longer warranty, and a two-speed tracking system.
The choice between JCB NXT 150 and Sany SY140C-9/9S Tunnel should be based on specific job requirements. If the primary need is for longer reach and higher digging forces, the JCB NXT 150 may be preferable. However, if the emphasis is on engine performance, tracking force, and faster movement across job sites, then the Sany SY140C-9/9S Tunnel would be the more apt choice.
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Brand | |
| JCB | SANY |
| Type | |
| Small (6-15 Ton) | Small (6-15 Ton) |
| Price | |
| ₹ 50-52 Lakhs | ₹ 52-53 Lakhs |
| Weight | |
| 14700 Kg | 14260 Kg |
| Bucket | |
| 0.75 m³ | 0.7 m³ |
| Max Digging Depth | |
| 5210 mm | 3131 mm |
| Engine | |
| Cummins 100 HP | Cummins 100.5 HP |
| Warranty | |
| 1 Yr. / 2000 hr. | 1 Yr. / 2500 hr. |
| Boom | |
| 4700 mm | 2900 mm |
| Quick Overview: | |
Featuring exceptional power and cost-effective performance, the JCB NXT 150 small excavator is used for construction and light engineering tasks. |
Featuring advanced technology for construction in tight and challenging tunneling conditions Sany’s SY140C-9/9S Tunnel small excavator is ideal. |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Engine Make | Cummins 4BT 3.9C | Cummins B3.9-100c |
| Fuel Tank | 253 L | 240 L |
| Engine Displacment | 3.9 L | 3.9 L |
| Under Carriage | 3550 mm | 3665 mm |
| Hydraulic System | 173 L | 150 L |
| Arm | 2100 mm | 1700 mm |
| Max Digging Reach | 8030 mm | 5918 mm |
| Fuel Consumption | NA | NA |
| Overall Width | 2410 mm | 2510 mm |
| Overall Length | 7710 mm | 5772 mm |
| Bucket Digging Force | 92.4 kN | 77.7 kN |
| Tailswing Radius | 2150 mm | 2285 mm |
| Track Shoe Width | 600 mm | 500 mm |
| AC Cabin | Optional | Optional |
| GPS | Standard | Standard |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Engine Make | |
| Cummins 4BT 3.9C | Cummins B3.9-100c |
| Fuel Tank | |
| 253 L | 240 L |
| Engine Displacment | |
| 3.9 L | 3.9 L |
| Under Carriage | |
| 3550 mm | 3665 mm |
| Hydraulic System | |
| 173 L | 150 L |
| Arm | |
| 2100 mm | 1700 mm |
| Max Digging Reach | |
| 8030 mm | 5918 mm |
| Fuel Consumption | |
| NA | NA |
| Overall Width | |
| 2410 mm | 2510 mm |
| Overall Length | |
| 7710 mm | 5772 mm |
| Bucket Digging Force | |
| 92.4 kN | 77.7 kN |
| Tailswing Radius | |
| 2150 mm | 2285 mm |
| Track Shoe Width | |
| 600 mm | 500 mm |
| AC Cabin | |
| Optional | Optional |
| GPS | |
| Standard | Standard |
| 3548 | 3604 | |
| Model | Cummins 100 HP | Cummins 100.5 HP |
| Fuel | Diesel | Diesel |
| Type | NA | 4 Cylinder , inline , Water Cooled |
| Rated Engine Power | 100 HP (75 kW) @ 2000 rpm | 100.5 HP (75 kW) @ 2200 rpm |
| Maximum Torque | NA | 385 Nm @ 1300 rpm |
| Piston Displacement | 3.9 L | 3.9 L |
| Alternator | NA | NA |
| Battery | NA | 12 V System (2-12V) |
| Starting Motor | NA | NA |
| NA | NA | |
| No of Top rollers | 1 | 1 |
| No of bottom rollers | 7 | 7 |
| Track Shoes (Each Side) | 44 | 44 |
| Track Guard | 2 | 1 |
| Track Shoe width | 600 mm | 500 mm |
| Ground bearing pressure | 39.1 kPa | 43.1 kPa |
| Track Tensioning | Grease | Grease |
| Gradeability | 70% (35°) | 70% (35°) |
| Travel Speed-Low | 3.6 Km/h | 3.5 Km/h |
| Travel Speed-High | NA | 5.5 Km/h |
| Max Tracking Force | 104.1 kN | 124.1 kN |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Hydraulic pump | 2 variable displacement axial piston type. | 2 Variable Displacement Axial Piston Pumps |
| Maximum Flow | 2 x 120 L/min | 2 x 121 L/min |
| Pilot Pump | Gear Pump | 1 Gear Pump |
| Implement Circuit | 33.0 MPa | 31.4 MPa |
| Swing Circuit | 27.9 MPa | 25.0 MPa |
| Travel circuit | 33.0 MPa | 31.4 MPa |
| Pilot circuit | 4.0 MPa | 3.9 MPa |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Travel | NA | 2 Axial Piston Motor With Parking Brake |
| Swing | Axial piston type. Hydraulic braking; electrically operated spring applied disc type parking brake. | 1 Axial Piston Motor with swing holding brake |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Fuel tank | 253 L | 240 L |
| Engine Coolant | 21.2 L | 6.7 L |
| Engine oil | 13.5 L | 9 L |
| Hydraulic system | 173 L | 150 L |
| Hydraulic tank | 73 L | 120 L |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Operating Weight | 14700 Kg | 14260 Kg |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Boom length | 4700 mm | 2900 mm |
| Arm length | 2100 mm | 1700 mm |
| Max Digging Reach | 8030 mm | 5918 mm |
| Max Digging Reach on ground | 7890 mm | 5744 mm |
| Max digging depth | 5210 mm | 3131 mm |
| Max digging height | 8880 mm | 6868 mm |
| Max Dump Height | 6380 mm | 4534 mm |
| Max vertical wallcut depth | 4630 mm | 2633 mm |
| Min swing radius | 2120 mm | 2432 mm |
| Max Height at Min Swing radius | NA | 4713 mm |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | 92.4 kN | 77.7 kN |
| Arm Digging Force | 74.1 kN | 81.8 kN |
| Swing Speed | 13.6 rpm | 12 rpm |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | NA | NA |
| Approach Angle | NA | NA |
| Width | NA | NA |
| Height | NA | NA |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Bucket Capacity | 0.75 m³ | 0.7 m³ |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel | |
| Overall Length | 7710 mm | 5772 mm |
| Overall width | 2410 mm | 2510 mm |
| Overall Height | 2813 mm | 2825 mm |
| Overall Height of Cab | 2760 mm | 2825 mm |
| Upper Width | NA | 2517 mm |
| Track Lengh on Ground | 2780 mm | 2930 mm |
| Undercarriage overall length | 3550 mm | 3665 mm |
| Tailswing radius | 2150 mm | 2285 mm |
| Min Ground clearance | 460 mm | 425 mm |
| Track gauge | 1990 mm | 1990 mm |
| Width over tracks | 2590 mm | 2517 mm |
| Track Height | 815 mm | NA |
| Counterweight Clearance | 910 mm | NA |
| Track Shoe Width | 600 mm | 500 mm |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Model | |
| Cummins 100 HP | Cummins 100.5 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| NA | 4 Cylinder , inline , Water Cooled |
| Rated Engine Power | |
| 100 HP (75 kW) @ 2000 rpm | 100.5 HP (75 kW) @ 2200 rpm |
| Maximum Torque | |
| NA | 385 Nm @ 1300 rpm |
| Piston Displacement | |
| 3.9 L | 3.9 L |
| Alternator | |
| NA | NA |
| Battery | |
| NA | 12 V System (2-12V) |
| Starting Motor | |
| NA | NA |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| No of Top rollers | |
| 1 | 1 |
| No of bottom rollers | |
| 7 | 7 |
| Track Shoes (Each Side) | |
| 44 | 44 |
| Track Guard | |
| 2 | 1 |
| Track Shoe width | |
| 600 mm | 500 mm |
| Ground bearing pressure | |
| 39.1 kPa | 43.1 kPa |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 70% (35°) | 70% (35°) |
| Travel Speed-Low | |
| 3.6 Km/h | 3.5 Km/h |
| Travel Speed-High | |
| NA | 5.5 Km/h |
| Max Tracking Force | |
| 104.1 kN | 124.1 kN |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Hydraulic pump | |
| 2 variable displacement axial piston type. | 2 Variable Displacement Axial Piston Pumps |
| Maximum Flow | |
| 2 x 120 L/min | 2 x 121 L/min |
| Pilot Pump | |
| Gear Pump | 1 Gear Pump |
| Implement Circuit | |
| 33.0 MPa | 31.4 MPa |
| Swing Circuit | |
| 27.9 MPa | 25.0 MPa |
| Travel circuit | |
| 33.0 MPa | 31.4 MPa |
| Pilot circuit | |
| 4.0 MPa | 3.9 MPa |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Fuel tank | |
| 253 L | 240 L |
| Engine Coolant | |
| 21.2 L | 6.7 L |
| Engine oil | |
| 13.5 L | 9 L |
| Hydraulic system | |
| 173 L | 150 L |
| Hydraulic tank | |
| 73 L | 120 L |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Operating Weight | |
| 14700 Kg | 14260 Kg |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Boom length | |
| 4700 mm | 2900 mm |
| Arm length | |
| 2100 mm | 1700 mm |
| Max Digging Reach | |
| 8030 mm | 5918 mm |
| Max Digging Reach on ground | |
| 7890 mm | 5744 mm |
| Max digging depth | |
| 5210 mm | 3131 mm |
| Max digging height | |
| 8880 mm | 6868 mm |
| Max Dump Height | |
| 6380 mm | 4534 mm |
| Max vertical wallcut depth | |
| 4630 mm | 2633 mm |
| Min swing radius | |
| 2120 mm | 2432 mm |
| Max Height at Min Swing radius | |
| NA | 4713 mm |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| 92.4 kN | 77.7 kN |
| Arm Digging Force | |
| 74.1 kN | 81.8 kN |
| Swing Speed | |
| 13.6 rpm | 12 rpm |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| NA | NA |
| Approach Angle | |
| NA | NA |
| Width | |
| NA | NA |
| Height | |
| NA | NA |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Bucket Capacity | |
| 0.75 m³ | 0.7 m³ |
| JCB NXT 150 | Sany SY140C-9/9S Tunnel |
|---|---|
| Overall Length | |
| 7710 mm | 5772 mm |
| Overall width | |
| 2410 mm | 2510 mm |
| Overall Height | |
| 2813 mm | 2825 mm |
| Overall Height of Cab | |
| 2760 mm | 2825 mm |
| Upper Width | |
| NA | 2517 mm |
| Track Lengh on Ground | |
| 2780 mm | 2930 mm |
| Undercarriage overall length | |
| 3550 mm | 3665 mm |
| Tailswing radius | |
| 2150 mm | 2285 mm |
| Min Ground clearance | |
| 460 mm | 425 mm |
| Track gauge | |
| 1990 mm | 1990 mm |
| Width over tracks | |
| 2590 mm | 2517 mm |
| Track Height | |
| 815 mm | NA |
| Counterweight Clearence | |
| 910 mm | NA |
| Track Shoe Width | |
| 600 mm | 500 mm |
© 2025 Desi Machines All rights reserved.
Designed & Developed by PromotEdge
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
