Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|
| Particulars | Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|
The JCB NXT 150 and Sany SY140C-9/9S Tunnel are closely matched excavators with slightly different offerings; the JCB boasts a higher bucket digging force and longer reach, while the Sany offers a bit more engine power, a longer warranty, and a two-speed tracking system.
The choice between JCB NXT 150 and Sany SY140C-9/9S Tunnel should be based on specific job requirements. If the primary need is for longer reach and higher digging forces, the JCB NXT 150 may be preferable. However, if the emphasis is on engine performance, tracking force, and faster movement across job sites, then the Sany SY140C-9/9S Tunnel would be the more apt choice.
| Brand | SANY | JCB |
|---|---|---|
| Type | Small (6-15 Ton) | Small (6-15 Ton) |
| Operating Cost | ₹ 52-53 Lakhs | ₹ 50-52 Lakhs |
| Price | ₹ 52-53 Lakhs | ₹ 50-52 Lakhs |
| Weight | 14260 Kg | 14700 Kg |
| Bucket | 0.7 m³ | 0.75 m³ |
| Max Digging Depth | 3131 mm | 5210 mm |
| Engine | Cummins 100.5 HP | Cummins 100 HP |
| Warranty | 1 Yr. / 2500 hr. | 1 Yr. / 2000 hr. |
| Boom | 2900 mm | 4700 mm |
| Quick Overview: | Featuring advanced technology for construction in tight and challenging tunneling conditions Sany’s SY140C-9/9S Tunnel small excavator is ideal. |
Featuring exceptional power and cost-effective performance, the JCB NXT 150 small excavator is used for construction and light engineering tasks. |
| Agency review | Get the best price for the Sany SY140C-9/9S TUNNEL Small Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the JCB NXT 150 Small Excavator from authorized dealers. Contact us now for exclusive deals! |
The JCB NXT 150 and Sany SY140C-9/9S Tunnel are closely matched excavators with slightly different offerings; the JCB boasts a higher bucket digging force and longer reach, while the Sany offers a bit more engine power, a longer warranty, and a two-speed tracking system.
The choice between JCB NXT 150 and Sany SY140C-9/9S Tunnel should be based on specific job requirements. If the primary need is for longer reach and higher digging forces, the JCB NXT 150 may be preferable. However, if the emphasis is on engine performance, tracking force, and faster movement across job sites, then the Sany SY140C-9/9S Tunnel would be the more apt choice.
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Brand | |
| SANY | JCB |
| Type | |
| Small (6-15 Ton) | Small (6-15 Ton) |
| Price | |
| ₹ 52-53 Lakhs | ₹ 50-52 Lakhs |
| Weight | |
| 14260 Kg | 14700 Kg |
| Bucket | |
| 0.7 m³ | 0.75 m³ |
| Max Digging Depth | |
| 3131 mm | 5210 mm |
| Engine | |
| Cummins 100.5 HP | Cummins 100 HP |
| Warranty | |
| 1 Yr. / 2500 hr. | 1 Yr. / 2000 hr. |
| Boom | |
| 2900 mm | 4700 mm |
| Quick Overview: | |
Featuring advanced technology for construction in tight and challenging tunneling conditions Sany’s SY140C-9/9S Tunnel small excavator is ideal. |
Featuring exceptional power and cost-effective performance, the JCB NXT 150 small excavator is used for construction and light engineering tasks. |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Engine Make | Cummins B3.9-100c | Cummins 4BT 3.9C |
| Fuel Tank | 240 L | 253 L |
| Engine Displacment | 3.9 L | 3.9 L |
| Under Carriage | 3665 mm | 3550 mm |
| Hydraulic System | 150 L | 173 L |
| Arm | 1700 mm | 2100 mm |
| Max Digging Reach | 5918 mm | 8030 mm |
| Fuel Consumption | NA | NA |
| Overall Width | 2510 mm | 2410 mm |
| Overall Length | 5772 mm | 7710 mm |
| Bucket Digging Force | 77.7 kN | 92.4 kN |
| Tailswing Radius | 2285 mm | 2150 mm |
| Track Shoe Width | 500 mm | 600 mm |
| AC Cabin | Optional | Optional |
| GPS | Standard | Standard |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Engine Make | |
| Cummins B3.9-100c | Cummins 4BT 3.9C |
| Fuel Tank | |
| 240 L | 253 L |
| Engine Displacment | |
| 3.9 L | 3.9 L |
| Under Carriage | |
| 3665 mm | 3550 mm |
| Hydraulic System | |
| 150 L | 173 L |
| Arm | |
| 1700 mm | 2100 mm |
| Max Digging Reach | |
| 5918 mm | 8030 mm |
| Fuel Consumption | |
| NA | NA |
| Overall Width | |
| 2510 mm | 2410 mm |
| Overall Length | |
| 5772 mm | 7710 mm |
| Bucket Digging Force | |
| 77.7 kN | 92.4 kN |
| Tailswing Radius | |
| 2285 mm | 2150 mm |
| Track Shoe Width | |
| 500 mm | 600 mm |
| AC Cabin | |
| Optional | Optional |
| GPS | |
| Standard | Standard |
| 3604 | 3548 | |
| Model | Cummins 100.5 HP | Cummins 100 HP |
| Fuel | Diesel | Diesel |
| Type | 4 Cylinder , inline , Water Cooled | NA |
| Rated Engine Power | 100.5 HP (75 kW) @ 2200 rpm | 100 HP (75 kW) @ 2000 rpm |
| Maximum Torque | 385 Nm @ 1300 rpm | NA |
| Piston Displacement | 3.9 L | 3.9 L |
| Alternator | NA | NA |
| Battery | 12 V System (2-12V) | NA |
| Starting Motor | NA | NA |
| NA | NA | |
| No of Top rollers | 1 | 1 |
| No of bottom rollers | 7 | 7 |
| Track Shoes (Each Side) | 44 | 44 |
| Track Guard | 1 | 2 |
| Track Shoe width | 500 mm | 600 mm |
| Ground bearing pressure | 43.1 kPa | 39.1 kPa |
| Track Tensioning | Grease | Grease |
| Gradeability | 70% (35°) | 70% (35°) |
| Travel Speed-Low | 3.5 Km/h | 3.6 Km/h |
| Travel Speed-High | 5.5 Km/h | NA |
| Max Tracking Force | 124.1 kN | 104.1 kN |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Hydraulic pump | 2 Variable Displacement Axial Piston Pumps | 2 variable displacement axial piston type. |
| Maximum Flow | 2 x 121 L/min | 2 x 120 L/min |
| Pilot Pump | 1 Gear Pump | Gear Pump |
| Implement Circuit | 31.4 MPa | 33.0 MPa |
| Swing Circuit | 25.0 MPa | 27.9 MPa |
| Travel circuit | 31.4 MPa | 33.0 MPa |
| Pilot circuit | 3.9 MPa | 4.0 MPa |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Travel | 2 Axial Piston Motor With Parking Brake | NA |
| Swing | 1 Axial Piston Motor with swing holding brake | Axial piston type. Hydraulic braking; electrically operated spring applied disc type parking brake. |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Fuel tank | 240 L | 253 L |
| Engine Coolant | 6.7 L | 21.2 L |
| Engine oil | 9 L | 13.5 L |
| Hydraulic system | 150 L | 173 L |
| Hydraulic tank | 120 L | 73 L |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Operating Weight | 14260 Kg | 14700 Kg |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Boom length | 2900 mm | 4700 mm |
| Arm length | 1700 mm | 2100 mm |
| Max Digging Reach | 5918 mm | 8030 mm |
| Max Digging Reach on ground | 5744 mm | 7890 mm |
| Max digging depth | 3131 mm | 5210 mm |
| Max digging height | 6868 mm | 8880 mm |
| Max Dump Height | 4534 mm | 6380 mm |
| Max vertical wallcut depth | 2633 mm | 4630 mm |
| Min swing radius | 2432 mm | 2120 mm |
| Max Height at Min Swing radius | 4713 mm | NA |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | 77.7 kN | 92.4 kN |
| Arm Digging Force | 81.8 kN | 74.1 kN |
| Swing Speed | 12 rpm | 13.6 rpm |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | NA | NA |
| Approach Angle | NA | NA |
| Width | NA | NA |
| Height | NA | NA |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Bucket Capacity | 0.7 m³ | 0.75 m³ |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 | |
| Overall Length | 5772 mm | 7710 mm |
| Overall width | 2510 mm | 2410 mm |
| Overall Height | 2825 mm | 2813 mm |
| Overall Height of Cab | 2825 mm | 2760 mm |
| Upper Width | 2517 mm | NA |
| Track Lengh on Ground | 2930 mm | 2780 mm |
| Undercarriage overall length | 3665 mm | 3550 mm |
| Tailswing radius | 2285 mm | 2150 mm |
| Min Ground clearance | 425 mm | 460 mm |
| Track gauge | 1990 mm | 1990 mm |
| Width over tracks | 2517 mm | 2590 mm |
| Track Height | NA | 815 mm |
| Counterweight Clearance | NA | 910 mm |
| Track Shoe Width | 500 mm | 600 mm |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Model | |
| Cummins 100.5 HP | Cummins 100 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 4 Cylinder , inline , Water Cooled | NA |
| Rated Engine Power | |
| 100.5 HP (75 kW) @ 2200 rpm | 100 HP (75 kW) @ 2000 rpm |
| Maximum Torque | |
| 385 Nm @ 1300 rpm | NA |
| Piston Displacement | |
| 3.9 L | 3.9 L |
| Alternator | |
| NA | NA |
| Battery | |
| 12 V System (2-12V) | NA |
| Starting Motor | |
| NA | NA |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| No of Top rollers | |
| 1 | 1 |
| No of bottom rollers | |
| 7 | 7 |
| Track Shoes (Each Side) | |
| 44 | 44 |
| Track Guard | |
| 1 | 2 |
| Track Shoe width | |
| 500 mm | 600 mm |
| Ground bearing pressure | |
| 43.1 kPa | 39.1 kPa |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 70% (35°) | 70% (35°) |
| Travel Speed-Low | |
| 3.5 Km/h | 3.6 Km/h |
| Travel Speed-High | |
| 5.5 Km/h | NA |
| Max Tracking Force | |
| 124.1 kN | 104.1 kN |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Hydraulic pump | |
| 2 Variable Displacement Axial Piston Pumps | 2 variable displacement axial piston type. |
| Maximum Flow | |
| 2 x 121 L/min | 2 x 120 L/min |
| Pilot Pump | |
| 1 Gear Pump | Gear Pump |
| Implement Circuit | |
| 31.4 MPa | 33.0 MPa |
| Swing Circuit | |
| 25.0 MPa | 27.9 MPa |
| Travel circuit | |
| 31.4 MPa | 33.0 MPa |
| Pilot circuit | |
| 3.9 MPa | 4.0 MPa |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Fuel tank | |
| 240 L | 253 L |
| Engine Coolant | |
| 6.7 L | 21.2 L |
| Engine oil | |
| 9 L | 13.5 L |
| Hydraulic system | |
| 150 L | 173 L |
| Hydraulic tank | |
| 120 L | 73 L |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Operating Weight | |
| 14260 Kg | 14700 Kg |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Boom length | |
| 2900 mm | 4700 mm |
| Arm length | |
| 1700 mm | 2100 mm |
| Max Digging Reach | |
| 5918 mm | 8030 mm |
| Max Digging Reach on ground | |
| 5744 mm | 7890 mm |
| Max digging depth | |
| 3131 mm | 5210 mm |
| Max digging height | |
| 6868 mm | 8880 mm |
| Max Dump Height | |
| 4534 mm | 6380 mm |
| Max vertical wallcut depth | |
| 2633 mm | 4630 mm |
| Min swing radius | |
| 2432 mm | 2120 mm |
| Max Height at Min Swing radius | |
| 4713 mm | NA |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| 77.7 kN | 92.4 kN |
| Arm Digging Force | |
| 81.8 kN | 74.1 kN |
| Swing Speed | |
| 12 rpm | 13.6 rpm |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| NA | NA |
| Approach Angle | |
| NA | NA |
| Width | |
| NA | NA |
| Height | |
| NA | NA |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Bucket Capacity | |
| 0.7 m³ | 0.75 m³ |
| Sany SY140C-9/9S Tunnel | JCB NXT 150 |
|---|---|
| Overall Length | |
| 5772 mm | 7710 mm |
| Overall width | |
| 2510 mm | 2410 mm |
| Overall Height | |
| 2825 mm | 2813 mm |
| Overall Height of Cab | |
| 2825 mm | 2760 mm |
| Upper Width | |
| 2517 mm | NA |
| Track Lengh on Ground | |
| 2930 mm | 2780 mm |
| Undercarriage overall length | |
| 3665 mm | 3550 mm |
| Tailswing radius | |
| 2285 mm | 2150 mm |
| Min Ground clearance | |
| 425 mm | 460 mm |
| Track gauge | |
| 1990 mm | 1990 mm |
| Width over tracks | |
| 2517 mm | 2590 mm |
| Track Height | |
| NA | 815 mm |
| Counterweight Clearence | |
| NA | 910 mm |
| Track Shoe Width | |
| 500 mm | 600 mm |
© 2025 Desi Machines All rights reserved.
Designed & Developed by PromotEdge
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
