Desi Machines: Your One-Stop Solution for Heavy Machinery, Comparison, and Unbeatable Deals!
Contact Us



    Your Captcha*

    captcha

    CASE 450NX VS L&T 491 Compactor

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights CASE 450NXL&T 491
    CASE 450NX VS L&T 491 Compactor
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE 450NX
    ₹ 15-18 Lakhs
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T 491
    ₹ 15-17 Lakhs
    Particulars CASE 450NX L&T 491
    Overview Summary

    The CASE 450NX is a compact tandem roller with a focus on maneuverability and operator comfort, while the L&T 491 brings a more potent engine and greater compaction force to the table. Both rollers include standard telematics and have specific strengths that cater to different project needs.

    CASE 450NX Mini Tandem Roller Compactor

    Pros:

    • Lower operating weight of 2900 kg for easier transport and maneuverability
    • High gradeability of 35% suitable for steep terrains
    • Hydrostatic drive acting on both drums provides smooth and controllable power
    • Good maneuverability with a steering angle of ±27° and oscillation of ±10°
    • Ergonomic controls and ROPS canopy for operator comfort and safety
    • Smart water sprinkling system to reduce water consumption

    Cons:

    • Lower engine power of 25 HP compared to L&T 491
    • Maximum drum width is 1000 mm, which is less than L&T 491's drum width
    • Less maximum centrifugal force (28.43 kN high) compared to L&T 491

    L&T 491 Mini Tandem Roller Compactor

    Pros:

    • Higher engine power of 48.5 HP suitable for heavy-duty applications
    • Greater centrifugal force (45 kN high) for more effective compaction
    • Wider drum (1225 mm) covers more surface area per pass
    • Larger fuel and hydraulic tanks for longer operating intervals
    • Larger water tank capacity of 170 L for extended working without refills
    • Better drum visibility and ground-level service access for easy maintenance

    Cons:

    • Heavier operating weight of 3450 kg may limit maneuverability and transport
    • Reduced gradeability of 27% compared to CASE 450NX
    • Slightly reduced steering angle of ±40° might impact tight maneuvering compared to CASE

    Pros:

    Cons:

    Closing Recommendation

    If the focus is on machine transportability, operator comfort, and steep terrain applications, consider the CASE 450NX. For higher power, effectiveness in compaction, and larger project scopes, the L&T 491 is the more suitable option.

    CASE 450NX Vs L&T 491 Compactor Price, Technical Specifications & Features

    Brand CASE Compactor L&T Komatsu Compactor
    Type Tandem Tandem
    Ex-Showroom Price ₹ 15-18 Lakhs ₹ 15-17 Lakhs
    Weight 2900 Kg 3450 kg
    Drum Width 1000 mm 1225 mm
    Engine M&M 25 HP M&M 48.5 HP
    Static Linear Load 14.8/14.2 kg/cm 14 kg/cm
    Centrifugal Force (High/Low) 45/31 kN 45/31 kN
    Travel Speed 0 - 12 km/hr 0 - 12 km/hr
    Quick Overview:

    The CASE 450 NX, 25 HP mini tandem roller, also called a baby roller, is meant for asphalt and soil compaction in confined worksites. Powered by a reliable engine, it comes with an operating weight of 2,900 kg and an efficient vibratory roller system, which can exert up to 43 kN of force for smooth and even results. This mini road roller integrates hydrostatic articulation into outstanding maneuverability to ensure productivity in both urban and highway projects. The CASE roller comes equipped with ergonomic controls, ROPS canopy, rust-proof tanks, and smart water sprinkling, and it has earned trust in many long-term jobs for durability, efficiency, and performance.

    The L&T 491 Mini Tandem Roller is a compact and versatile mini roller compactor ideal for asphalt and soil compaction in urban, roadside, and infrastructure projects. With an operating weight of about 3450 kg, a 48.5 HP Mahindra engine, and a drum width of 1,225 mm, this vibratory roller delivers consistent compaction force of 45 kN with dual frequencies of 65 / 55 Hz. Known as a reliable baby roller and mini road roller, it features excellent drum-edge visibility, a suspended frame design, and service access at ground level. A trusted double drum roller for performance, durability, and ease of maintenance.

    Overview Summary

    The CASE 450NX is a compact tandem roller with a focus on maneuverability and operator comfort, while the L&T 491 brings a more potent engine and greater compaction force to the table. Both rollers include standard telematics and have specific strengths that cater to different project needs.

    CASE 450NX Mini Tandem Roller Compactor

    Pros:

    • Lower operating weight of 2900 kg for easier transport and maneuverability
    • High gradeability of 35% suitable for steep terrains
    • Hydrostatic drive acting on both drums provides smooth and controllable power
    • Good maneuverability with a steering angle of ±27° and oscillation of ±10°
    • Ergonomic controls and ROPS canopy for operator comfort and safety
    • Smart water sprinkling system to reduce water consumption

    Cons:

    • Lower engine power of 25 HP compared to L&T 491
    • Maximum drum width is 1000 mm, which is less than L&T 491's drum width
    • Less maximum centrifugal force (28.43 kN high) compared to L&T 491

    L&T 491 Mini Tandem Roller Compactor

    Pros:

    • Higher engine power of 48.5 HP suitable for heavy-duty applications
    • Greater centrifugal force (45 kN high) for more effective compaction
    • Wider drum (1225 mm) covers more surface area per pass
    • Larger fuel and hydraulic tanks for longer operating intervals
    • Larger water tank capacity of 170 L for extended working without refills
    • Better drum visibility and ground-level service access for easy maintenance

    Cons:

    • Heavier operating weight of 3450 kg may limit maneuverability and transport
    • Reduced gradeability of 27% compared to CASE 450NX
    • Slightly reduced steering angle of ±40° might impact tight maneuvering compared to CASE

    Pros:

    Cons:

    Closing Recommendation

    If the focus is on machine transportability, operator comfort, and steep terrain applications, consider the CASE 450NX. For higher power, effectiveness in compaction, and larger project scopes, the L&T 491 is the more suitable option.

    CASE 450NX Vs L&T 491 Compactor Price, Technical Specifications & Features

    CASE 450NX L&T 491
    Brand
    CASE Compactor L&T Komatsu Compactor
    Type
    Tandem Tandem
    Ex-Showroom Price
    ₹ 15-18 Lakhs ₹ 15-17 Lakhs
    Weight
    2900 Kg 3450 kg
    Drum Width
    1000 mm 1225 mm
    Engine
    M&M 25 HP M&M 48.5 HP
    Static Linear Load
    14.8/14.2 kg/cm 14 kg/cm
    Centrifugal Force (High/Low)
    28.43/16.20 kN 45/31 kN
    Travel Speed
    0 - 9 km/hr 0 - 12 km/hr
    Quick Overview:

    The CASE 450 NX, 25 HP mini tandem roller, also called a baby roller, is meant for asphalt and soil compaction in confined worksites. Powered by a reliable engine, it comes with an operating weight of 2,900 kg and an efficient vibratory roller system, which can exert up to 43 kN of force for smooth and even results. This mini road roller integrates hydrostatic articulation into outstanding maneuverability to ensure productivity in both urban and highway projects. The CASE roller comes equipped with ergonomic controls, ROPS canopy, rust-proof tanks, and smart water sprinkling, and it has earned trust in many long-term jobs for durability, efficiency, and performance.

    The L&T 491 Mini Tandem Roller is a compact and versatile mini roller compactor ideal for asphalt and soil compaction in urban, roadside, and infrastructure projects. With an operating weight of about 3450 kg, a 48.5 HP Mahindra engine, and a drum width of 1,225 mm, this vibratory roller delivers consistent compaction force of 45 kN with dual frequencies of 65 / 55 Hz. Known as a reliable baby roller and mini road roller, it features excellent drum-edge visibility, a suspended frame design, and service access at ground level. A trusted double drum roller for performance, durability, and ease of maintenance.

    CASE 450NX Vs L&T 491 Compactor Key Highlights

    CASE 450NX L&T 491
    Engine Make Mahindra & Mahindra 275DI Mahindra MTorque 4485
    Fuel Tank 38 L 55 L
    Hydraulic Tank 40 L 45 L
    Frequency High/Low 61/46 Hz 65/55 Hz
    Nominal Amplitude (High/Low) 0.5 mm 0.6 mm
    Max. Gradeability 35% 27%
    Steering Angle ± 27° ±40°
    Turning Radius, Outside NA NA
    Wheel Base 1925 mm 2190 mm
    Water Tank 150 L 170 L
    Overall Length 2871 mm 2930 mm
    Overall Width 1184 mm 1340 mm
    Overall Height 2697 mm 2800 mm
    Telematics Standard Standard
    Warranty 1 Year 1 Year

    CASE 450NX Vs L&T 491 Compactor Key Highlights

    CASE 450NX L&T 491
    Engine Make
    Mahindra & Mahindra 275DI Mahindra MTorque 4485
    Fuel Tank
    38 L 55 L
    Hydraulic Tank
    40 L 45 L
    Frequency High/Low
    61/46 Hz 65/55 Hz
    Nominal Amplitude (High/Low)
    0.5 mm 0.6 mm
    Max. Gradeability
    35% 27%
    Steering Angle
    ± 27° ±40°
    Turning Radius, Outside
    NA NA
    Wheel Base
    1925 mm 2190 mm
    Water Tank
    150 L 170 L
    Overall Length
    2871 mm 2930 mm
    Overall Width
    1184 mm 1340 mm
    Overall Height
    2697 mm 2800 mm
    Telematics
    Standard Standard
    Warranty
    1 Year 1 Year

    CASE 450NX Vs L&T 491 Compactor Specifications

    Engine

    CASE 450NX L&T 491
    Engine Make Mahindra & Mahindra 275DI Mahindra MTorque 4485
    Engine Type CEV Emission Stage-V; Liquid Cooled CEV V; 4 Cylinders; 4-Stroke inline; Natural Aspirated; Water cooled; CRDI
    Max. Power 25 HP (18.5 kW) @ 2200 rpm 48.5 HP (36 kW) @ 2200 rpm
    Displacement 2.048 L 2.9 L
    Max Torque 130 Nm @ 1200 rpm 185 Nm @ 1200–1500 rpm
    Battery 12V 12V - 80 Ah / 55A

    Service Capacities

    CASE 450NX L&T 491
    Fuel Tank 38 L 55 L
    Hydraulic Tank 40 L 45 L
    Engine Oil 5 L 8.5 L
    Engine Coolant 6.8 L 8.5 L

    Traction

    CASE 450NX L&T 491
    Max. Travel Speed 0 - 9 km/hr 0 - 12 km/hr
    Max. Working Speed 0 - 9 km/hr 0 - 6 km/hr
    Max. Gradeability 35% 27%

    Vibration System

    CASE 450NX L&T 491
    Centrifugal Force (High/Low) 28.43/16.20 kN 45/31 kN
    Nominal Amplitude (High/Low) 0.5 mm 0.6 mm
    Frequency High/Low 61/46 Hz 65/55 Hz
    Vibration Stages 2 2
    SLL (Front/Rear) 14.8/14.2 kg/cm 14 kg/cm

    Hydraulic System

    CASE 450NX L&T 491
    Travel System Hydrostatic drive acting on both drums with tank mounted type axial-piston variable displacement pump Hydrostatic drive with infinitely variable displacement axial piston pump with low speed high torque motor
    Vibration System Tank mounted fixed-displacement gear pump supplying flow to exciter gear motors Fixed displacement gear pump with fixed displacement gear motor

    Steerring

    CASE 450NX L&T 491
    Steering Type Hydrostatic (Center Point Articulation) Articulated
    Steering Angle ± 27° ±40°
    Oscillation ±10° ±13°

    Brakes

    CASE 450NX L&T 491
    Service Brakes Hydrostatic Hydrostatic Brake (FNR control)
    Parking Brakes hydraulically released, Spring applied Spring Applied Hydraulically Released (SAHR)

    Water System

    CASE 450NX L&T 491
    Water Spray System Type Pressurized water sprinkler system. Pressure Spray Drum Wetting System with Diaphragm Water Pumps
    Water Tank 150 L 170 L

    Operational Data

    CASE 450NX L&T 491
    Operating Weight 2900 Kg 3450 kg
    Max. Operating Weight NA 3535 kg
    Front Axle Load 1480 kg 1725 kg
    Rear Axle Load 1420 kg 1725 kg

    Dimensions

    CASE 450NX L&T 491
    Wheel Base 1925 mm 2190 mm
    Overall Width 1184 mm 1340 mm
    Overall Height 2697 mm 2800 mm
    Height (Top of Steering) 1827 mm 2080 mm
    Overall Length 2871 mm 2930 mm
    Drum Width 1000 mm 1225 mm
    Drum Diameter 700 mm 725 mm
    Drum Thickness 12 mm 13.5 mm
    Ground Clearance 307 mm 370 mm
    Curb Clearance 560 mm 584 mm
    Turning Radius, Outside NA NA
    Turning Radius, Inside 3320 mm 2300 mm

    CASE 450NX Vs L&T 491 Compactor Specifications

    Engine

    CASE 450NX L&T 491
    Engine Make
    Mahindra & Mahindra 275DI Mahindra MTorque 4485
    Engine Type
    CEV Emission Stage-V; Liquid Cooled CEV V; 4 Cylinders; 4-Stroke inline; Natural Aspirated; Water cooled; CRDI
    Max. Power
    25 HP (18.5 kW) @ 2200 rpm 48.5 HP (36 kW) @ 2200 rpm
    Displacement
    2.048 L 2.9 L
    Max Torque
    130 Nm @ 1200 rpm 185 Nm @ 1200–1500 rpm
    Battery
    12V 12V - 80 Ah / 55A

    Service Capacities

    CASE 450NX L&T 491
    Fuel Tank
    38 L 55 L
    Hydraulic Tank
    40 L 45 L
    Engine Oil
    5 L 8.5 L
    Engine Coolant
    6.8 L 8.5 L

    Traction

    CASE 450NX L&T 491
    Max. Travel Speed
    0 - 9 km/hr 0 - 12 km/hr
    Max. Working Speed
    0 - 9 km/hr 0 - 6 km/hr
    Max. Gradeability
    35% 27%

    Vibration System

    CASE 450NX L&T 491
    Centrifugal Force (High/Low)
    28.43/16.20 kN 45/31 kN
    Nominal Amplitude (High/Low)
    0.5 mm 0.6 mm
    Frequency High/Low
    61/46 Hz 65/55 Hz
    Vibration Stages
    2 2
    SLL (Front/Rear)
    14.8/14.2 kg/cm 14 kg/cm

    Hydraulic System

    CASE 450NX L&T 491
    Travel System
    Hydrostatic drive acting on both drums with tank mounted type axial-piston variable displacement pump Hydrostatic drive with infinitely variable displacement axial piston pump with low speed high torque motor
    Vibration System
    Tank mounted fixed-displacement gear pump supplying flow to exciter gear motors Fixed displacement gear pump with fixed displacement gear motor

    Steering

    CASE 450NX L&T 491
    Steering Type
    Hydrostatic (Center Point Articulation) Articulated
    Steering Angle
    ± 27° ±40°
    Oscillation
    ±10° ±13°

    Brakes

    CASE 450NX L&T 491
    Service Brakes
    Hydrostatic Hydrostatic Brake (FNR control)
    Parking Brakes
    hydraulically released, Spring applied Spring Applied Hydraulically Released (SAHR)

    Weight

    CASE 450NX L&T 491
    Operating Weight
    2900 Kg 3450 kg

    Water System

    CASE 450NX L&T 491
    Water Spray System Type
    Pressurized water sprinkler system. Pressure Spray Drum Wetting System with Diaphragm Water Pumps
    Water Tank
    150 L 170 L

    Operational Data

    CASE 450NX L&T 491
    Operating Weight
    2900 Kg 3450 kg
    Max. Operating Weight
    NA 3535 kg
    Front Axle Load
    1480 kg 1725 kg
    Rear Axle Load
    1420 kg 1725 kg

    Dimensions

    CASE 450NX L&T 491
    Wheel Base
    1925 mm 2190 mm
    Overall Width
    1184 mm 1340 mm
    Overall Height
    2697 mm 2800 mm
    Height (Top of Steering)
    1827 mm 2080 mm
    Overall Length
    2871 mm 2930 mm
    Drum Width
    1000 mm 1225 mm
    Drum Diameter
    700 mm 725 mm
    Drum Thickness
    12 mm 13.5 mm
    Ground Clearance
    307 mm 370 mm
    Curb Clearance
    560 mm 584 mm
    Turning Radius, Outside
    NA NA
    Turning Radius, Inside
    3320 mm 2300 mm

    Popular Comparisons with CASE 450NX

    VS
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    desi-machines-ammann-arx-32-2-mini-roller-featured
    Ammann

    Ammann ARX 32.2

    4.5 rating
    ₹ 15-20 Lakhs
    3375 kg
    VS
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    VS
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Escorts EC 3664 Mini Tandem Roller Compactor | Desi Machines
    Escorts Kubota

    Escorts EC 3664

    4.5 rating
    ₹ 12-16 Lakhs
    3300 kg
    VS
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Dynapac CC1250 CEV-V Tandem Roller Compactor | Desi Machines
    Dynapac

    Dynapac CC1250 CEV-V

    4.5 rating
    ₹ 14-17 Lakhs
    3000 kg
    VS
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Dynapac CC125 CEV-V Tandem Roller Compactor | Desi Machines
    Dynapac

    Dynapac CC125 CEV-V

    4.5 rating
    ₹ 14-17 Lakhs
    2800 kg
    VS
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    JCB VMT330 Mini Tandem Roller Compactor | Desi Machines
    JCB

    JCB VMT330

    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg

    Popular Comparisons with L&T 491

    VS
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    desi-machines-ammann-arx-32-2-mini-roller-featured
    Ammann

    Ammann ARX 32.2

    4.5 rating
    ₹ 15-20 Lakhs
    3375 kg
    VS
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    Escorts EC 3664 Mini Tandem Roller Compactor | Desi Machines
    Escorts Kubota

    Escorts EC 3664

    4.5 rating
    ₹ 12-16 Lakhs
    3300 kg
    VS
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    Dynapac CC1250 CEV-V Tandem Roller Compactor | Desi Machines
    Dynapac

    Dynapac CC1250 CEV-V

    4.5 rating
    ₹ 14-17 Lakhs
    3000 kg
    VS
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    Dynapac CC125 CEV-V Tandem Roller Compactor | Desi Machines
    Dynapac

    Dynapac CC125 CEV-V

    4.5 rating
    ₹ 14-17 Lakhs
    2800 kg
    VS
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    JCB VMT330 Mini Tandem Roller Compactor | Desi Machines
    JCB

    JCB VMT330

    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    VS
    L&T 491 Mini Tandem Roller Compactor | Desi Machines
    L&T Komatsu

    L&T 491

    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    CASE 450NX Mini Tandem Roller Compactor | Desi Machines
    CASE

    CASE 450NX

    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare