Popular Products
Popular Comparisons
Contact Us



    Your Captcha*

    captcha

    Contact Info
    Chat with us

    CASE 450NX VS JCB VMT330 Compactor

    CASE 450NX Price
    ₹ 15-18 Lakhs*

    CASE 450NX

    • icon alt1 Weight

      2900 Kg

    • Drum Width

      1000 mm

    • Engine

      M&M 25 HP

    • Static Load

      14.8/14.2 kg/cm

    • CF - Hi/Low

      28.43/16.20 kN

    • Travel Speed

      0 - 9 km/hr
    Tandem Roller
    JCB 330 Road Roller Price
    ₹ 15-20 Lakhs*

    JCB VMT330

    • icon alt1 Weight

      3300 kg

    • Drum Width

      1250 mm

    • Engine

      Simpson 45 HP

    • Static Load

      13.2 kg/cm

    • CF - Hi/Low

      45 kN

    • Travel Speed

      0 - 5 km/hr
    Tandem Roller

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights CASE 450NXJCB VMT330
    CASE 450NX VS JCB VMT330 Compactor
    CASE 450NX Price
    CASE 450NX

    ₹ 15-18 Lakhs

    JCB 330 Road Roller Price
    JCB VMT330

    ₹ 15-20 Lakhs

    Particulars CASE 450NX JCB VMT330

    Case 450Nx vs JCB VMT330: Which Roller Should You Buy?

    Both are small tandem roller compactors. They press soil and asphalt on roads, footpaths and small sites. The tables below give you all the numbers. The real question is which one fits your work. The Case 450Nx is smaller and lighter. It has a 1000 mm drum and climbs slopes better. It is a good choice for tight lanes, trenches and hill areas. The JCB VMT330 has more power and a wider 1250 mm drum. It covers more ground in one pass. It is better for wide roads and bigger jobs where you want to finish fast.

    Before you buy, think about a few simple things. Is there a service centre near you for that make? Can you get parts fast when the machine stops? Will it be easy to sell after some years? You can see more models in the JCB compactor range and the Case compactor range. To understand drum size, weight and force, read our compactor buying guide.

    CASE 450NX Mini Tandem Roller Compactor

    Pros:

    • Reliable Mahindra & Mahindra engine with 25 HP at 2200 rpm
    • Efficient vibratory roller system with two vibration stages
    • High max gradeability of 35%
    • Excellent maneuverability with center point articulation
    • Large water tank capacity of 150 L

    Cons:

    • Lower engine power compared to JCB VMT330
    • Smaller drum width of 1000 mm
    • Slightly less centrifugal force on the high setting

    JCB VMT330 Mini Tandem Roller Compactor

    Pros:

    • Higher engine power with 45 HP at 2250 rpm
    • Larger drum width of 1250 mm for covering more area
    • Greater centrifugal force of 45 kN
    • Higher steering angle of ±36° for better maneuverability
    • User-friendly maintenance-free articulation with oscillation

    Cons:

    • Lower maximum gradeability of 30%
    • Heavier operating weight which might affect mobility in confined spaces

    Pros:

    Cons:

    Closing Recommendation

    Pick the machine that fits the work in front of you. The Case 450Nx is smaller and climbs slopes well, so it is right for tight lanes, trenches and hill areas where you need to turn in small spaces. The JCB VMT330 has more power and a wider drum, so it covers more ground in one pass and suits wide roads and bigger jobs where you want to finish fast. Also check that the make you choose has a service centre and spare parts near you, and that drivers can run it and it will be easy to resell later. So match the machine to your work: Case 450Nx for tight, sloped sites, JCB VMT330 for wide, large jobs.

    CASE 450NX Vs JCB VMT330 Compactor Price, Technical Specifications & Features

    Brand CASE Compactor JCB Compactor
    Type Tandem Tandem
    Ex-Showroom Price ₹ 15-18 Lakhs ₹ 15-20 Lakhs
    Weight 2900 Kg 3300 kg
    Drum Width 1000 mm 1250 mm
    Engine M&M 25 HP Simpson 45 HP
    Static Linear Load 14.8/14.2 kg/cm 13.2 kg/cm
    Centrifugal Force (High/Low) 45 kN 45 kN
    Travel Speed 0 - 5 km/hr 0 - 5 km/hr
    Quick Overview:

    The CASE 450 NX, 25 HP mini tandem roller, also called a baby roller, is meant for asphalt and soil compaction in confined worksites. Powered by a reliable engine, it comes with an operating weight of 2,900 kg and an efficient vibratory roller system, which can exert up to 43 kN of force for smooth and even results. This mini road roller integrates hydrostatic articulation into outstanding maneuverability to ensure productivity in both urban and highway projects. The CASE roller comes equipped with ergonomic controls, ROPS canopy, rust-proof tanks, and smart water sprinkling, and it has earned trust in many long-term jobs for durability, efficiency, and performance.

    The JCB VMT330 Mini Tandem Roller is a compact, efficient compactor machine built for reliable work in road construction and surface finishing. Also called a baby roller or mini road roller, it runs on a 45 HP diesel engine that provides steady power while saving fuel. The double drum design has a 1,250 mm drum width and a modern vibratory system for even compaction of soil and asphalt. Weighing about 3,300 kg, the JCB roller is stable and easy to handle, making it a good choice for footpaths, trenches, service roads, flyovers, rural roads, and industrial sites. It is supported by JCB’s trusted engineering.

    Case 450Nx vs JCB VMT330: Which Roller Should You Buy?

    Both are small tandem roller compactors. They press soil and asphalt on roads, footpaths and small sites. The tables below give you all the numbers. The real question is which one fits your work. The Case 450Nx is smaller and lighter. It has a 1000 mm drum and climbs slopes better. It is a good choice for tight lanes, trenches and hill areas. The JCB VMT330 has more power and a wider 1250 mm drum. It covers more ground in one pass. It is better for wide roads and bigger jobs where you want to finish fast.

    Before you buy, think about a few simple things. Is there a service centre near you for that make? Can you get parts fast when the machine stops? Will it be easy to sell after some years? You can see more models in the JCB compactor range and the Case compactor range. To understand drum size, weight and force, read our compactor buying guide.

    CASE 450NX Mini Tandem Roller Compactor

    Pros:

    • Reliable Mahindra & Mahindra engine with 25 HP at 2200 rpm
    • Efficient vibratory roller system with two vibration stages
    • High max gradeability of 35%
    • Excellent maneuverability with center point articulation
    • Large water tank capacity of 150 L

    Cons:

    • Lower engine power compared to JCB VMT330
    • Smaller drum width of 1000 mm
    • Slightly less centrifugal force on the high setting

    JCB VMT330 Mini Tandem Roller Compactor

    Pros:

    • Higher engine power with 45 HP at 2250 rpm
    • Larger drum width of 1250 mm for covering more area
    • Greater centrifugal force of 45 kN
    • Higher steering angle of ±36° for better maneuverability
    • User-friendly maintenance-free articulation with oscillation

    Cons:

    • Lower maximum gradeability of 30%
    • Heavier operating weight which might affect mobility in confined spaces

    Pros:

    Cons:

    Closing Recommendation

    Pick the machine that fits the work in front of you. The Case 450Nx is smaller and climbs slopes well, so it is right for tight lanes, trenches and hill areas where you need to turn in small spaces. The JCB VMT330 has more power and a wider drum, so it covers more ground in one pass and suits wide roads and bigger jobs where you want to finish fast. Also check that the make you choose has a service centre and spare parts near you, and that drivers can run it and it will be easy to resell later. So match the machine to your work: Case 450Nx for tight, sloped sites, JCB VMT330 for wide, large jobs.

    CASE 450NX Vs JCB VMT330 Compactor Price, Technical Specifications & Features

    CASE 450NX JCB VMT330
    Brand
    CASE Compactor JCB Compactor
    Type
    Tandem Tandem
    Ex-Showroom Price
    ₹ 15-18 Lakhs ₹ 15-20 Lakhs
    Weight
    2900 Kg 3300 kg
    Drum Width
    1000 mm 1250 mm
    Engine
    M&M 25 HP Simpson 45 HP
    Static Linear Load
    14.8/14.2 kg/cm 13.2 kg/cm
    Centrifugal Force (High/Low)
    28.43/16.20 kN 45 kN
    Travel Speed
    0 - 9 km/hr 0 - 5 km/hr
    Quick Overview:

    The CASE 450 NX, 25 HP mini tandem roller, also called a baby roller, is meant for asphalt and soil compaction in confined worksites. Powered by a reliable engine, it comes with an operating weight of 2,900 kg and an efficient vibratory roller system, which can exert up to 43 kN of force for smooth and even results. This mini road roller integrates hydrostatic articulation into outstanding maneuverability to ensure productivity in both urban and highway projects. The CASE roller comes equipped with ergonomic controls, ROPS canopy, rust-proof tanks, and smart water sprinkling, and it has earned trust in many long-term jobs for durability, efficiency, and performance.

    The JCB VMT330 Mini Tandem Roller is a compact, efficient compactor machine built for reliable work in road construction and surface finishing. Also called a baby roller or mini road roller, it runs on a 45 HP diesel engine that provides steady power while saving fuel. The double drum design has a 1,250 mm drum width and a modern vibratory system for even compaction of soil and asphalt. Weighing about 3,300 kg, the JCB roller is stable and easy to handle, making it a good choice for footpaths, trenches, service roads, flyovers, rural roads, and industrial sites. It is supported by JCB’s trusted engineering.

    CASE 450NX Vs JCB VMT330 Compactor Key Highlights

    CASE 450NX JCB VMT330
    Engine Make Mahindra & Mahindra 275DI Simpson SJ327
    Fuel Tank 38 L 100 L
    Hydraulic Tank 40 L 60 L
    Frequency High/Low 61/46 Hz 67/55 Hz
    Nominal Amplitude (High/Low) 0.5 mm 0.6 mm
    Max. Gradeability 35% 30%
    Steering Angle ± 27° ±36°
    Turning Radius, Outside NA NA
    Wheel Base 1925 mm 2030 mm
    Water Tank 150 L 210 L
    Overall Length 2871 mm 2824 mm
    Overall Width 1184 mm 1353 mm
    Overall Height 2697 mm 2563 mm
    Telematics Standard Standard
    Warranty 1 Year 1 Yr. / 2000 hr.

    CASE 450NX Vs JCB VMT330 Compactor Key Highlights

    CASE 450NX JCB VMT330
    Engine Make
    Mahindra & Mahindra 275DI Simpson SJ327
    Fuel Tank
    38 L 100 L
    Hydraulic Tank
    40 L 60 L
    Frequency High/Low
    61/46 Hz 67/55 Hz
    Nominal Amplitude (High/Low)
    0.5 mm 0.6 mm
    Max. Gradeability
    35% 30%
    Steering Angle
    ± 27° ±36°
    Turning Radius, Outside
    NA NA
    Wheel Base
    1925 mm 2030 mm
    Water Tank
    150 L 210 L
    Overall Length
    2871 mm 2824 mm
    Overall Width
    1184 mm 1353 mm
    Overall Height
    2697 mm 2563 mm
    Telematics
    Standard Standard
    Warranty
    1 Year 1 Yr. / 2000 hr.

    CASE 450NX Vs JCB VMT330 Compactor Specifications

    Engine

    CASE 450NX JCB VMT330
    Engine Make Mahindra & Mahindra 275DI Simpson SJ327
    Engine Type CEV Emission Stage-V; Liquid Cooled CEV-V; 3-Cylinder; 4-Stroke diesel; Liquid-Cooled
    Max. Power 25 HP (18.5 kW) @ 2200 rpm 45 HP (33.07 kW) @ 2250 rpm
    Displacement 2.048 L 2.7 L
    Max Torque 130 Nm @ 1200 rpm NA
    Battery 12V 12V - 80 Ah / 65A

    Service Capacities

    CASE 450NX JCB VMT330
    Fuel Tank 38 L 100 L
    Hydraulic Tank 40 L 60 L
    Engine Oil 5 L NA
    Engine Coolant 6.8 L NA

    Traction

    CASE 450NX JCB VMT330
    Max. Travel Speed 0 - 9 km/hr 0 - 5 km/hr
    Max. Working Speed 0 - 9 km/hr 0 - 5 km/hr
    Max. Gradeability 35% 30%

    Vibration System

    CASE 450NX JCB VMT330
    Centrifugal Force (High/Low) 28.43/16.20 kN 45 kN
    Nominal Amplitude (High/Low) 0.5 mm 0.6 mm
    Frequency High/Low 61/46 Hz 67/55 Hz
    Vibration Stages 2 2
    SLL (Front/Rear) 14.8/14.2 kg/cm 13.2 kg/cm

    Hydraulic System

    CASE 450NX JCB VMT330
    Travel System Hydrostatic drive acting on both drums with tank mounted type axial-piston variable displacement pump Hydrostatic with variable displacement pump and fixed displacement motors with direct drive to both drums
    Vibration System Tank mounted fixed-displacement gear pump supplying flow to exciter gear motors Electrically controlled hydrostatic direct drive on both drums (only front drum vibrates)

    Steerring

    CASE 450NX JCB VMT330
    Steering Type Hydrostatic (Center Point Articulation) maintenance-free articulation with oscillation, Servo assisted
    Steering Angle ± 27° ±36°
    Oscillation ±10° ±13°

    Brakes

    CASE 450NX JCB VMT330
    Service Brakes Hydrostatic Hydrostatic
    Parking Brakes hydraulically released, Spring applied hydraulically released, Spring applied

    Water System

    CASE 450NX JCB VMT330
    Water Spray System Type Pressurized water sprinkler system. Pressurised water sprinkler system with two pumps (one per drum) and multi-stage filtration (fill/pump/nozzle).
    Water Tank 150 L 210 L

    Operational Data

    CASE 450NX JCB VMT330
    Operating Weight 2900 Kg 3300 kg
    Max. Operating Weight NA 3450 kg
    Front Axle Load 1480 kg NA
    Rear Axle Load 1420 kg NA

    Dimensions

    CASE 450NX JCB VMT330
    Wheel Base 1925 mm 2030 mm
    Overall Width 1184 mm 1353 mm
    Overall Height 2697 mm 2563 mm
    Height (Top of Steering) 1827 mm 1730 mm
    Overall Length 2871 mm 2824 mm
    Drum Width 1000 mm 1250 mm
    Drum Diameter 700 mm 700 mm
    Drum Thickness 12 mm 13.5 mm
    Ground Clearance 307 mm 250 mm
    Curb Clearance 560 mm 593 mm
    Turning Radius, Outside NA NA
    Turning Radius, Inside 3320 mm 2326 mm

    CASE 450NX Vs JCB VMT330 Compactor Specifications

    Engine

    CASE 450NX JCB VMT330
    Engine Make
    Mahindra & Mahindra 275DI Simpson SJ327
    Engine Type
    CEV Emission Stage-V; Liquid Cooled CEV-V; 3-Cylinder; 4-Stroke diesel; Liquid-Cooled
    Max. Power
    25 HP (18.5 kW) @ 2200 rpm 45 HP (33.07 kW) @ 2250 rpm
    Displacement
    2.048 L 2.7 L
    Max Torque
    130 Nm @ 1200 rpm NA
    Battery
    12V 12V - 80 Ah / 65A

    Service Capacities

    CASE 450NX JCB VMT330
    Fuel Tank
    38 L 100 L
    Hydraulic Tank
    40 L 60 L
    Engine Oil
    5 L NA
    Engine Coolant
    6.8 L NA

    Traction

    CASE 450NX JCB VMT330
    Max. Travel Speed
    0 - 9 km/hr 0 - 5 km/hr
    Max. Working Speed
    0 - 9 km/hr 0 - 5 km/hr
    Max. Gradeability
    35% 30%

    Vibration System

    CASE 450NX JCB VMT330
    Centrifugal Force (High/Low)
    28.43/16.20 kN 45 kN
    Nominal Amplitude (High/Low)
    0.5 mm 0.6 mm
    Frequency High/Low
    61/46 Hz 67/55 Hz
    Vibration Stages
    2 2
    SLL (Front/Rear)
    14.8/14.2 kg/cm 13.2 kg/cm

    Hydraulic System

    CASE 450NX JCB VMT330
    Travel System
    Hydrostatic drive acting on both drums with tank mounted type axial-piston variable displacement pump Hydrostatic with variable displacement pump and fixed displacement motors with direct drive to both drums
    Vibration System
    Tank mounted fixed-displacement gear pump supplying flow to exciter gear motors Electrically controlled hydrostatic direct drive on both drums (only front drum vibrates)

    Steering

    CASE 450NX JCB VMT330
    Steering Type
    Hydrostatic (Center Point Articulation) maintenance-free articulation with oscillation, Servo assisted
    Steering Angle
    ± 27° ±36°
    Oscillation
    ±10° ±13°

    Brakes

    CASE 450NX JCB VMT330
    Service Brakes
    Hydrostatic Hydrostatic
    Parking Brakes
    hydraulically released, Spring applied hydraulically released, Spring applied

    Weight

    CASE 450NX JCB VMT330
    Operating Weight
    2900 Kg 3300 kg

    Water System

    CASE 450NX JCB VMT330
    Water Spray System Type
    Pressurized water sprinkler system. Pressurised water sprinkler system with two pumps (one per drum) and multi-stage filtration (fill/pump/nozzle).
    Water Tank
    150 L 210 L

    Operational Data

    CASE 450NX JCB VMT330
    Operating Weight
    2900 Kg 3300 kg
    Max. Operating Weight
    NA 3450 kg
    Front Axle Load
    1480 kg NA
    Rear Axle Load
    1420 kg NA

    Dimensions

    CASE 450NX JCB VMT330
    Wheel Base
    1925 mm 2030 mm
    Overall Width
    1184 mm 1353 mm
    Overall Height
    2697 mm 2563 mm
    Height (Top of Steering)
    1827 mm 1730 mm
    Overall Length
    2871 mm 2824 mm
    Drum Width
    1000 mm 1250 mm
    Drum Diameter
    700 mm 700 mm
    Drum Thickness
    12 mm 13.5 mm
    Ground Clearance
    307 mm 250 mm
    Curb Clearance
    560 mm 593 mm
    Turning Radius, Outside
    NA NA
    Turning Radius, Inside
    3320 mm 2326 mm

    Popular Comparisons with CASE 450NX

    VS
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Ammann 32 Road Roller Price in India
    Ammann Ammann ARX 32.2
    4.5 rating
    ₹ 15-20 Lakhs
    3375 kg
    Compare
    VS
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    L&T 491 Roller Price
    L&T Komatsu L&T 491
    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    Compare
    VS
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Escort 3664 Road Roller Price
    Escorts Kubota Escorts EC 3664
    4.5 rating
    ₹ 12-16 Lakhs
    3300 kg
    Compare
    VS
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Dynapac CC1250
    Dynapac Dynapac CC1250 CEV-V
    4.5 rating
    ₹ 14-17 Lakhs
    3000 kg
    Compare
    VS
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Dynapac CC125 Price in India
    Dynapac Dynapac CC125 CEV-V
    4.5 rating
    ₹ 14-17 Lakhs
    2800 kg
    Compare
    VS
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    Compare

    Popular Comparisons with JCB VMT330

    VS
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    Ammann 32 Road Roller Price in India
    Ammann Ammann ARX 32.2
    4.5 rating
    ₹ 15-20 Lakhs
    3375 kg
    Compare
    VS
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    L&T 491 Roller Price
    L&T Komatsu L&T 491
    4.5 rating
    ₹ 15-17 Lakhs
    3450 kg
    Compare
    VS
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    Escort 3664 Road Roller Price
    Escorts Kubota Escorts EC 3664
    4.5 rating
    ₹ 12-16 Lakhs
    3300 kg
    Compare
    VS
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    Dynapac CC1250
    Dynapac Dynapac CC1250 CEV-V
    4.5 rating
    ₹ 14-17 Lakhs
    3000 kg
    Compare
    VS
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    Dynapac CC125 Price in India
    Dynapac Dynapac CC125 CEV-V
    4.5 rating
    ₹ 14-17 Lakhs
    2800 kg
    Compare
    VS
    JCB 330 Road Roller Price
    JCB JCB VMT330
    4.5 rating
    ₹ 15-20 Lakhs
    3300 kg
    CASE 450NX Price
    CASE CASE 450NX
    4.5 rating
    ₹ 15-18 Lakhs
    2900 kg
    Compare

    Frequently Asked Question

    Ans.

    The JCB VMT330 is usually easier to sell. JCB is a very well known name in India, so more buyers look for it. This helps you sell fast and get a fair price. The Case 450Nx also sells, but fewer people search for it. If an easy sale later matters to you, JCB is the safer choice.

    Ans.

    JCB has more service centres and dealers across India, so parts often come faster. Case has a smaller network, so check if there is a Case dealer near your site before you buy. For any roller, one week of waiting for a part can stop your work. Ask both dealers how far they are and how fast they send parts.

    Ans.

    The Case 450Nx uses less fuel because it has a smaller 25 HP engine. It is good for light and medium work. The JCB VMT330 has a bigger 45 HP engine, so it burns more fuel but does more work in a day. If your jobs are wide and heavy, the extra fuel is worth it. If your jobs are small, the Case saves money each day.

    Ans.

    Pick the wider 1250 mm drum on the JCB VMT330 for wide roads and open sites, because it covers more area in one pass and finishes faster. Pick the narrow 1000 mm drum on the Case 450Nx for tight lanes, footpaths and trenches, because it fits into small spaces. Choose by the width of the places where you will work most.

    Ans.

    The Case 450Nx is better on slopes. It climbs a steeper grade than the JCB VMT330. It is also lighter and turns in tight spots more easily. So for hill roads, ghats and small uneven sites, the Case is the safer pick. For flat, wide roads, the JCB works well and covers more ground.

    Ans.

    Yes, very easily. Banks, finance companies and dealers all give loans for these rollers. How much you pay each month depends on your down payment and your loan record. Ask two or three lenders first. Do not take the first EMI offer you get.

    CASE 450NX Vs JCB VMT330 - Compare Price & Availability Across 600+ Locations in India

    Compare CASE 450NX Vs JCB VMT330 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare