Click to view details
Desi Machines: Your One-Stop Solution for Heavy Machinery, Comparison, and Unbeatable Deals!

Contact Us

Contact Info

CASE 770 EX VS JCB 3DX Backhoe Loader

CASE 770 EX
  • Engine
    Ashok Leyland 74 HP
  • featIcon2 (1) alt
    Bucket
    0.26 m³
  • shovel-icon1 alt
    Shovel
    1.1 m³
  • Dig. Depth
    4440 mm
  • dumping height loader
    Dump Height
    2730 mm
  • icon alt1
    Weight
    7780 Kg
₹ 25-27 Lakhs*
2WD/4WD
JCB 3DX
  • Engine
    JCB 49 HP
  • featIcon2 (1) alt
    Bucket
    0.26 m³
  • shovel-icon1 alt
    Shovel
    1.0 m³
  • Dig. Depth
    4770 mm
  • dumping height loader
    Dump Height
    2740 mm
  • icon alt1
    Weight
    7200 Kg
₹ 34-36 Lakhs*
2WD/4WD

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

Key Highlights CASE 770 EXJCB 3DX
CASE 770 EX VS JCB 3DX Backhoe Loader
CASE 770 EX Backhoe Loader Price in India
CASE 770 EX
₹ 25-27 Lakhs
JCB 3DX Backhoe Loader Price in India
JCB 3DX
₹ 34-36 Lakhs
Particulars CASE 770 EX JCB 3DX
Overview Summary

The CASE 770 EX and JCB 3DX are both formidable backhoe loaders with their respective strengths. The CASE 770 EX offers a more powerful engine and a larger shovel capacity for heavy-duty tasks, while the JCB 3DX excels in fuel efficiency with its advanced engine and offers a greater lifting capacity and digging depth.

CASE 770 EX

Pros:
  • Higher engine power of 74 HP for robust performance
  • Greater digging depth of 4440 mm
  • Better bucket rotation angle of 204° for flexibility in operation
  • Higher standard shovel capacity of 1.1 m³ for larger volume digging and loading
  • Equipped with GPS as standard for better fleet management
Cons:
  • Priced higher compared to JCB 3DX
  • Lower payload capacity at 1925 kg than JCB 3DX

JCB 3DX

Pros:
  • Advanced CRDi Stage 5 engine with better fuel efficiency and environmental compliance
  • Greater maximum lift capacity of 1490 Kg
  • Maximum digging depth of 4770 mm exceeds CASE 770 EX
  • Compact minimum ground clearance (310 mm) for better stability
Cons:
  • Lower engine power at 49 HP which may affect performance in tough conditions
  • Reduced standard shovel capacity at 1.0 m³

Pros:
Cons:

Closing Recommendation

The choice between the CASE 770 EX and JCB 3DX should be based on your specific needs. If power and shovel capacity are your priority, the CASE 770 EX might be more suitable. However, if you require a machine with a deeper digging depth and prioritize fuel efficiency, the JCB 3DX could be the better option.

Price, Technical Specifications & Features

Brand CASE JCB
Type 2WD/4WD 2WD/4WD
Price ₹ 25-27 Lakhs ₹ 34-36 Lakhs
Engine Ashok Leyland 74 HP JCB 49 HP
Bucket 0.26 m³ 0.26 m³
Shovel 1.1 m³ 1.0 m³
Max Digging Depth 4440 mm 4770 mm
Max Dump Height 2730 mm 2740 mm
Weight 7780 Kg 7200 Kg
Quick Overview:

Designed for power and durability, the CASE 770 EX backhoe loader delivers efficient performance with a robust engine and advanced features.

The JCB 3DX backhoe loader delivers high productivity, fuel efficiency, and superior durability, making it ideal for diverse construction and excavation tasks.
Overview Summary

The CASE 770 EX and JCB 3DX are both formidable backhoe loaders with their respective strengths. The CASE 770 EX offers a more powerful engine and a larger shovel capacity for heavy-duty tasks, while the JCB 3DX excels in fuel efficiency with its advanced engine and offers a greater lifting capacity and digging depth.

CASE 770 EX

Pros:
  • Higher engine power of 74 HP for robust performance
  • Greater digging depth of 4440 mm
  • Better bucket rotation angle of 204° for flexibility in operation
  • Higher standard shovel capacity of 1.1 m³ for larger volume digging and loading
  • Equipped with GPS as standard for better fleet management
Cons:
  • Priced higher compared to JCB 3DX
  • Lower payload capacity at 1925 kg than JCB 3DX

JCB 3DX

Pros:
  • Advanced CRDi Stage 5 engine with better fuel efficiency and environmental compliance
  • Greater maximum lift capacity of 1490 Kg
  • Maximum digging depth of 4770 mm exceeds CASE 770 EX
  • Compact minimum ground clearance (310 mm) for better stability
Cons:
  • Lower engine power at 49 HP which may affect performance in tough conditions
  • Reduced standard shovel capacity at 1.0 m³

Pros:
Cons:

Closing Recommendation

The choice between the CASE 770 EX and JCB 3DX should be based on your specific needs. If power and shovel capacity are your priority, the CASE 770 EX might be more suitable. However, if you require a machine with a deeper digging depth and prioritize fuel efficiency, the JCB 3DX could be the better option.

Price, Technical Specifications & Features

CASE 770 EX JCB 3DX
Brand
CASE JCB
Type
2WD/4WD 2WD/4WD
Price
₹ 25-27 Lakhs ₹ 34-36 Lakhs
Engine
Ashok Leyland 74 HP JCB 49 HP
Bucket
0.26 m³ 0.26 m³
Shovel
1.1 m³ 1.0 m³
Max Digging Depth
4440 mm 4770 mm
Max Dump Height
2730 mm 2740 mm
Weight
7780 Kg 7200 Kg
Quick Overview:

Designed for power and durability, the CASE 770 EX backhoe loader delivers efficient performance with a robust engine and advanced features.

The JCB 3DX backhoe loader delivers high productivity, fuel efficiency, and superior durability, making it ideal for diverse construction and excavation tasks.

Key Highlights

CASE 770 EX JCB 3DX
Engine Make Ashok Leyland H4C4E7422*W JCB 430
Fuel Tank 129 L 128 L
Max Torque 340 Nm @ 1400 -1500 RPM 270 Nm @ 1320 RPM
Max Speed 34.1 km/hr 32.3 km/hr
Hydraulic System 107 L 92 L
Max Working Height 5500 mm 5970 mm
Excavator Max Lift Capacity 1464 kg 1490 kg
Loader Load Over Height 3800 mm 4180 mm
Overall Length 5880 mm 6000 mm
Wheel Base 2180 mm 2170 mm
Bucket Digging Force 5206 kgf 5959 kgf
Shovel Breakout Force 5805 kgf 5272 kgf
Warranty 1 Year 1 Yr. / 2000 hr.
AC Cabin Optional Optional
GPS Standard Standard

Key Highlights

CASE 770 EX JCB 3DX
Engine Make
Ashok Leyland H4C4E7422*W JCB 430
Fuel Tank
129 L 128 L
Max Torque
340 Nm @ 1400 -1500 RPM 270 Nm @ 1320 RPM
Max Speed
34.1 km/hr 32.3 km/hr
Hydraulic System
107 L 92 L
Max Working Height
5500 mm 5970 mm
Excavator Max Lift Capacity
1464 kg 1490 kg
Loader Load Over Height
3800 mm 4180 mm
Overall Length
5880 mm 6000 mm
Wheel Base
2180 mm 2170 mm
Bucket Digging Force
5206 kgf 5959 kgf
Shovel Breakout Force
5805 kgf 5272 kgf
Warranty
1 Year 1 Yr. / 2000 hr.
AC Cabin
Optional Optional
GPS
Standard Standard

Specifications

Engine

CASE 770 EX JCB 3DX
Model Ashok Leyland 74 HP JCB 49 HP
Type Tier 4B/ CEV BS-IV; 4 Cylinders; Turbocharged Intercooled; Electronic; Common Rail Direct Injection CRDi Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
Gross Power 74 HP (54.4 kW) @ 2200 RPM 49 HP (37 kW) @ 2050 RPM
Max Torque 340 Nm @ 1400 -1500 RPM 270 Nm @ 1320 RPM
Displacement 3.84 L 3.0 L
Battery 12V / 110 Ah 12V
Alternator NA 130A

Transmission

CASE 770 EX JCB 3DX
Type CARRARO 2WD; 4F-4R Power Shuttle Synchromesh Transmission JCB synchroshuttle transmission

Steering

CASE 770 EX JCB 3DX
Type Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
Working Pressure 140 bar 160 bar

Steering Turning Circle

CASE 770 EX JCB 3DX
Inner Wheels Braked - Outside Loader Bucket 9200 mm 8640 mm
Inner Wheels Braked - Outside Wheels NA 6200 mm
Inner Wheels not Braked - Outside Loader Bucket 11100 mm 11600 mm
Inner Wheels not Braked - Outside Wheels NA 8940 mm

Brakes

CASE 770 EX JCB 3DX
Service Hydraulic foot operated; 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc ype on the rear axle; well protected from dirt; water etc. equiring no maintenance.
Parking Mechanically actuated caliper type brake pack on Rear axle input shaft Hand operated; disc brakes on rear axle input disc.

Tyres

CASE 770 EX JCB 3DX
Front 9 x 16 - 16 PR 9 x 16 - 16 PR
Rear 16.9 x 28 - 12 PR 16.9 x 28 - 12 PR (Industrial)

Speed

CASE 770 EX JCB 3DX
Forward- 1st gear 5.8 km/hr 5 km/hr
Reverse- 1st gear 6.8 km/hr 5 km/hr
Forward- 2nd gear 9.3 Km.h 8 km/hr
Reverse- 2nd gear 10.8 km/hr 5 km/hr
Forward- 3rd gear 19.5 km/hr 17 km/hr
Reverse- 3rd gear 22.1 km/hr Not Recommeded
Forward- 4th gear 34.1 km/hr 32.3 km/hr
Reverse- 4th gear Not recommended Not Recommeded

Hydraulics

CASE 770 EX JCB 3DX
Type Open Center Load Sensing; Twin Gear Pump Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
Maximum Pump Flow 126 L/min 114 L/min @ 2000 RPM
System Pressure 195 bar 270 bar

Axles

CASE 770 EX JCB 3DX
Rear Axle CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
Front Axle CNH PS1300 (2WD) Steer axle; centrally pivoted; with oscillation angle of 16

Service Capacities

CASE 770 EX JCB 3DX
Fuel Tank 129 L 128 L
Engine Coolant 20 L 16.5 L
Engine Oil 9.1 L 15 L
Hydraulic Tank 80 L NA
Hydraulic System 107 L 92 L
Transmission 18 L 17.5 L
Rear Axle 17.1 L 20 L

Excavator Performance

CASE 770 EX JCB 3DX
Maximum Digging Depth 4440 mm 4770 mm
Reach-Ground Level to Rear Wheel Centre 6950 mm 6720 mm
Reach-Ground Level to Slew Centre 5625 mm 5400 mm
Reach at Full Height to Slew Centre 2150 mm 2900 mm
Side Reach to Centre Line of Machine NA 6020 mm
Maximum Working Height 5500 mm 5970 mm
Maximum Load Over Height 3800 mm 4180 mm
Bucket Rotation Angle 204° 185°
Bucket Digging force 5206 kgf 5959 kgf
Arm Digging force 3031 kgf 3257 kgf
Maximum Lift Capacity 1464 kg 1490 kg
Standard Bucket Capacity 0.26 m³ 0.26 m³
Standard Bucket Width NA 790 mm

Loader Performance

CASE 770 EX JCB 3DX
Dump Height 2730 mm 2740 mm
Load Over Height 3300 mm 3320 mm
Pin Height 3600 mm 3540 mm
Pin Forward Reach 240 mm 250 mm
Reach At Ground 1980 mm 1520 mm
Maximum Reach at Full Height 1190 mm 1150 mm
Max Reach Full Height Dumped 760 mm 880 mm
Below Ground Level Dig Depth 110 mm 70 mm
Rollback at Ground 33° 45°
Dump Angle 45° 38°
Shovel Breakout Force 5805 kgf 5272 kgf
Loader Arm Breakout Force 4750 kgf 5635 kgf
Maximum Payload 1925 kg 1650 kg

Overall Dimensions And Weight

CASE 770 EX JCB 3DX
Machine Weight 7780-7840 kg 7200 kg
Overall Length 5880 mm 6000 mm
Wheelbase 2180 mm 2170 mm
Slew Centre to Rear Axle Centre NA 1320 mm
Minimum Ground Clearance 380 mm 310 mm
Slew Ground Clearance NA 510 mm
Height of Cabin 2800 mm 2870 mm
Overall Height 3850 mm 3610 mm
Track Width-Rear 1700 mm 1730 mm
Track Width-Front 1880 mm 1860 mm
Width Over Bucket 2800 mm 2350 mm

Specifications

Engine

CASE 770 EX JCB 3DX
Model
Ashok Leyland 74 HP JCB 49 HP
Type
Tier 4B/ CEV BS-IV; 4 Cylinders; Turbocharged Intercooled; Electronic; Common Rail Direct Injection CRDi Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
Gross Power
74 HP (54.4 kW) @ 2200 RPM 49 HP (37 kW) @ 2050 RPM
Max Torque
340 Nm @ 1400 -1500 RPM 270 Nm @ 1320 RPM
Displacement
3.84 L 3.0 L
Battery
12V / 110 Ah 12V
Alternator
NA 130A

Transmission

CASE 770 EX JCB 3DX
Type
CARRARO 2WD; 4F-4R Power Shuttle Synchromesh Transmission JCB synchroshuttle transmission

Steering

CASE 770 EX JCB 3DX
Type
Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
Working Pressure
140 bar 160 bar

Steering Turning Circle

CASE 770 EX JCB 3DX
Inner Wheels Braked - Outside Loader Bucket
9200 mm 8640 mm
Inner Wheels Braked - Outside Wheels
NA 6200 mm
Inner Wheels not Braked - Outside Loader Bucket
11100 mm 11600 mm
Inner Wheels not Braked - Outside Wheels
NA 8940 mm

Brakes

CASE 770 EX JCB 3DX
Service
Hydraulic foot operated; 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc ype on the rear axle; well protected from dirt; water etc. equiring no maintenance.
Parking
Mechanically actuated caliper type brake pack on Rear axle input shaft Hand operated; disc brakes on rear axle input disc.

Tyres

CASE 770 EX JCB 3DX
Front
9 x 16 - 16 PR 9 x 16 - 16 PR
Rear
16.9 x 28 - 12 PR 16.9 x 28 - 12 PR (Industrial)

Speed

CASE 770 EX JCB 3DX
Forward- 1st gear
5.8 km/hr 5 km/hr
Reverse- 1st gear
6.8 km/hr 5 km/hr
Forward- 2nd gear
9.3 Km.h 8 km/hr
Reverse- 2nd gear
10.8 km/hr 5 km/hr
Forward- 3rd gear
19.5 km/hr 17 km/hr
Reverse- 3rd gear
22.1 km/hr Not Recommeded
Forward- 4th gear
34.1 km/hr 32.3 km/hr
Reverse- 4th gear
Not recommended Not Recommeded

Hydraulics

CASE 770 EX JCB 3DX
Type
Open Center Load Sensing; Twin Gear Pump Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
Maximum Pump Flow
126 L/min 114 L/min @ 2000 RPM
System Pressure
195 bar 270 bar

Axles

CASE 770 EX JCB 3DX
Rear Axle
CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
Front Axle
CNH PS1300 (2WD) Steer axle; centrally pivoted; with oscillation angle of 16

Service Capacities

CASE 770 EX JCB 3DX
Fuel Tank
129 L 128 L
Engine Coolant
20 L 16.5 L
Engine Oil
9.1 L 15 L
Hydraulic Tank
80 L NA
Hydraulic System
107 L 92 L
Transmission
18 L 17.5 L
Rear Axle
17.1 L 20 L

Excavator Performance

CASE 770 EX JCB 3DX
Maximum Digging Depth
4440 mm 4770 mm
Reach-Ground Level to Rear Wheel Centre
6950 mm 6720 mm
Reach-Ground Level to Slew Centre
5625 mm 5400 mm
Reach at Full Height to Slew Centre
2150 mm 2900 mm
Side Reach to Centre Line of Machine
NA 6020 mm
Maximum Working Height
5500 mm 5970 mm
Maximum Load Over Height
3800 mm 4180 mm
Bucket Rotation Angle
204° 185°
Bucket Digging force
5206 kgf 5959 kgf
Arm Digging force
3031 kgf 3257 kgf
Maximum Lift Capacity
1464 kg 1490 kg
Standard Bucket Capacity
0.26 m³ 0.26 m³
Standard Bucket Width
NA 790 mm

Loader Performance

CASE 770 EX JCB 3DX
Dump Height
2730 mm 2740 mm
Load Over Height
3300 mm 3320 mm
Pin Height
3600 mm 3540 mm
Pin Forward Reach
240 mm 250 mm
Reach At Ground
1980 mm 1520 mm
Maximum Reach at Full Height
1190 mm 1150 mm
Max Reach Full Height Dumped
760 mm 880 mm
Below Ground Level Dig Depth
110 mm 70 mm
Rollback at Ground
33° 45°
Dump Angle
45° 38°
Shovel Breakout Force
5805 kgf 5272 kgf
Loader Arm Breakout Force
4750 kgf 5635 kgf
Maximum Payload
1925 kg 1650 kg

Overall Dimensions And Weight

CASE 770 EX JCB 3DX
Machine Weight
7780-7840 kg 7200 kg
Overall Length
5880 mm 6000 mm
Wheelbase
2180 mm 2170 mm
Slew Centre to Rear Axle Centre
NA 1320 mm
Minimum Ground Clearance
380 mm 310 mm
Slew Ground Clearance
NA 510 mm
Height of Cabin
2800 mm 2870 mm
Overall Height
3850 mm 3610 mm
Track Width-Rear
1700 mm 1730 mm
Track Width-Front
1880 mm 1860 mm
Width Over Bucket
2800 mm 2350 mm

© 2025 Desi Machines All rights reserved.

Designed & Developed by PromotEdge

Help Us Reach You!

Let's get started

Disclaimer

Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

Compare


    Kindly fill out the below form. Our representative will get in touch with you