The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | JCB 3DX Plus | CASE 770 EX Plus |
|---|
| Particulars | JCB 3DX Plus | CASE 770 EX Plus |
|---|
Comparing the CASE 770 EX Plus and JCB 3DX Plus, we observe that both share similar horsepower and maximum speed, but differ in aspects like engine torque, digging depth, and bucket forces. The CASE offers a greater breakout force and torque, while the JCB has a slightly better digging depth and hydraulic system pressure.
Your choice between the CASE 770 EX Plus and JCB 3DX Plus should depend on the specific requirements of your job site. If you are looking for stronger excavation capabilities and a larger fuel tank for extended use, the CASE may be your pick. However, if deeper digging depth and a high-pressure hydraulic system are crucial, then the JCB 3DX Plus might be the better option.
| Brand | JCB | CASE |
|---|---|---|
| Type | 2WD/4WD | 2WD/4WD |
| Price | ₹ 30-32 Lakhs | ₹ 27-32 Lakhs |
| Engine | JCB 74 HP | Ashok Leyland 74 HP |
| Bucket | 0.26 m³ | 0.30 m³ |
| Shovel | 1.1 m³ | 1.1 m³ |
| Max Digging Depth | 4770 mm | 4700 mm |
| Max Dump Height | 2740 mm | 2730 mm |
| Weight | 7510 Kg | 7955 Kg |
| Quick Overview: | Equipped with advanced hydraulics, the JCB 3DX PLUS backhoe loader ensures excellent digging depth, higher lifting capacity, and improved performance in demanding applications. |
The CASE 770 EX Plus backhoe loader ensures higher lifting capacity, improved breakout force, and exceptional efficiency for tough job site conditions. |
Comparing the CASE 770 EX Plus and JCB 3DX Plus, we observe that both share similar horsepower and maximum speed, but differ in aspects like engine torque, digging depth, and bucket forces. The CASE offers a greater breakout force and torque, while the JCB has a slightly better digging depth and hydraulic system pressure.
Your choice between the CASE 770 EX Plus and JCB 3DX Plus should depend on the specific requirements of your job site. If you are looking for stronger excavation capabilities and a larger fuel tank for extended use, the CASE may be your pick. However, if deeper digging depth and a high-pressure hydraulic system are crucial, then the JCB 3DX Plus might be the better option.
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Brand | |
| JCB | CASE |
| Type | |
| 2WD/4WD | 2WD/4WD |
| Price | |
| ₹ 30-32 Lakhs | ₹ 27-32 Lakhs |
| Engine | |
| JCB 74 HP | Ashok Leyland 74 HP |
| Bucket | |
| 0.26 m³ | 0.30 m³ |
| Shovel | |
| 1.1 m³ | 1.1 m³ |
| Max Digging Depth | |
| 4770 mm | 4700 mm |
| Max Dump Height | |
| 2740 mm | 2730 mm |
| Weight | |
| 7510 Kg | 7955 Kg |
| Quick Overview: | |
Equipped with advanced hydraulics, the JCB 3DX PLUS backhoe loader ensures excellent digging depth, higher lifting capacity, and improved performance in demanding applications. |
The CASE 770 EX Plus backhoe loader ensures higher lifting capacity, improved breakout force, and exceptional efficiency for tough job site conditions. |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Engine Make | JCB 430 | Ashok Leyland H4C4E7422*W |
| Fuel Tank | 128 L | 129 L |
| Max Torque | 440 Nm @ 1150 RPM | 340 Nm @ 1400 -1500 RPM |
| Max Speed | 36 km/hr | 35.0 km/hr |
| Hydraulic System | 92 L | 107 L |
| Max Working Height | 5970 mm | 5700 mm |
| Excavator Max Lift Capacity | 1490 kg | 1545 kg |
| Loader Load Over Height | 4180 mm | 3800 mm |
| Overall Length | 6000 mm | 5960 mm |
| Wheel Base | 2170 mm | 2180 mm |
| Bucket Digging Force | 5959 kgf | 5616 kgf |
| Shovel Breakout Force | 5272 kgf | 6250 kgf |
| Warranty | 1 Yr. / 2000 hr. | 1 Year |
| AC Cabin | Optional | Optional |
| GPS | Standard | Standard |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Engine Make | |
| JCB 430 | Ashok Leyland H4C4E7422*W |
| Fuel Tank | |
| 128 L | 129 L |
| Max Torque | |
| 440 Nm @ 1150 RPM | 340 Nm @ 1400 -1500 RPM |
| Max Speed | |
| 36 km/hr | 35.0 km/hr |
| Hydraulic System | |
| 92 L | 107 L |
| Max Working Height | |
| 5970 mm | 5700 mm |
| Excavator Max Lift Capacity | |
| 1490 kg | 1545 kg |
| Loader Load Over Height | |
| 4180 mm | 3800 mm |
| Overall Length | |
| 6000 mm | 5960 mm |
| Wheel Base | |
| 2170 mm | 2180 mm |
| Bucket Digging Force | |
| 5959 kgf | 5616 kgf |
| Shovel Breakout Force | |
| 5272 kgf | 6250 kgf |
| Warranty | |
| 1 Yr. / 2000 hr. | 1 Year |
| AC Cabin | |
| Optional | Optional |
| GPS | |
| Standard | Standard |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Model | JCB 74 HP | Ashok Leyland 74 HP |
| Type | 4 cylinder; water cooled; Turbocharged with EGR and aftertreatment system DOC and DPF. | Tier 4B/ CEV BS-IV; 4 Cylinders; Turbocharged Intercooled; Electronic; Common Rail Direct Injection |
| Gross Power | 74 HP (55 kW) @ 2200 RPM | 74 HP (54.4 kW) @ 2200 RPM |
| Max Torque | 440 Nm @ 1150 RPM | 340 Nm @ 1400 -1500 RPM |
| Displacement | 3.0 L | 3.84 L |
| Battery | 12V | 12V / 110 Ah |
| Alternator | 130A | NA |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Type | JCB synchroshuttle transmission | CARRARO 2WD; 4F-4R Power Shuttle Synchromesh Transmission |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Type | Power track steering rod system provides equal turn steering & quick response with less operating force. | Power Steering |
| Working Pressure | 160 bar | 140 bar |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Inner Wheels Braked - Outside Loader Bucket | 8640 mm | 9800 mm |
| Inner Wheels Braked - Outside Wheels | 6200 mm | NA |
| Inner Wheels not Braked - Outside Loader Bucket | 11600 mm | 11200 mm |
| Inner Wheels not Braked - Outside Wheels | 8940 mm | NA |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Service | JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water etc. requiring no maintenance. | Hydraulic foot operated; 2 disc per side |
| Parking | Hand operated; disc brakes on rear axle input disc. | Mechanically actuated caliper type brake pack on Rear axle input shaft |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Front | 9 x 16 - 16 PR | 9 x 16 - 16 PR |
| Rear | 16.9 x 28 - 12 PR (Industrial) | 16.9 x 28 - 12 PR |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Forward- 1st gear | 6.5 km/hr | 5.8 km/hr |
| Reverse- 1st gear | 6.5 km/hr | 6.8 km/hr |
| Forward- 2nd gear | 10.5 km/hr | 9.3 Km.h |
| Reverse- 2nd gear | 10.5 km/hr | 10.8 km/hr |
| Forward- 3rd gear | 19.8 km/hr | 19.5 km/hr |
| Reverse- 3rd gear | Not Recommeded | 22.1 km/hr |
| Forward- 4th gear | 36 km/hr | 35.0 km/hr |
| Reverse- 4th gear | Not Recommeded | Not recommended |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Type | Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. | Open Center Load Sensing; Variable Displacement Pump |
| Maximum Pump Flow | 114 L/min @ 2000 RPM | 146 L/min |
| System Pressure | 270 bar | 210 bar |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Rear Axle | Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. | CARRARO 28.32M |
| Front Axle | Steer axle; centrally pivoted; with oscillation angle of 16 | CNH PS1300 (2WD) |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Fuel Tank | 128 L | 129 L |
| Engine Coolant | 20.5 L | 20 L |
| Engine Oil | 15 L | 9.1 L |
| Hydraulic Tank | NA | 80 L |
| Hydraulic System | 92 L | 107 L |
| Transmission | 17.5 L | 18 L |
| Rear Axle | 20 L | 17.1 L |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Maximum Digging Depth | 4770 mm | 4700 mm |
| Reach-Ground Level to Rear Wheel Centre | 6720 mm | 7220 mm |
| Reach-Ground Level to Slew Centre | 5400 mm | 5895 mm |
| Reach at Full Height to Slew Centre | 2900 mm | 2400 mm |
| Side Reach to Centre Line of Machine | 6020 mm | NA |
| Maximum Working Height | 5970 mm | 5700 mm |
| Maximum Load Over Height | 4180 mm | 3800 mm |
| Bucket Rotation Angle | 185° | 204° |
| Bucket Digging force | 5959 kgf | 5616 kgf |
| Arm Digging force | 3257 kgf | 3780 kgf |
| Maximum Lift Capacity | 1490 kg | 1545 kg |
| Standard Bucket Capacity | 0.26 m³ | 0.30 m³ |
| Standard Bucket Width | 790 mm | NA |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Dump Height | 2740 mm | 2730 mm |
| Load Over Height | 3320 mm | 3300 mm |
| Pin Height | 3540 mm | 3600 mm |
| Pin Forward Reach | 250 mm | 240 mm |
| Reach At Ground | 1520 mm | 1980 mm |
| Maximum Reach at Full Height | 1150 mm | 1190 mm |
| Max Reach Full Height Dumped | 880 mm | 760 mm |
| Below Ground Level Dig Depth | 70 mm | 110 mm |
| Rollback at Ground | 45° | 33° |
| Dump Angle | 38° | 45° |
| Shovel Breakout Force | 5272 kgf | 6250 kgf |
| Loader Arm Breakout Force | 5635 kgf | 5115 kgf |
| Maximum Payload | 1800 kg | 1925 kg |
| JCB 3DX Plus | CASE 770 EX Plus | |
| Machine Weight | 7510 kg | 7955-8015 kg |
| Overall Length | 6000 mm | 5960 mm |
| Wheelbase | 2170 mm | 2180 mm |
| Slew Centre to Rear Axle Centre | 1320 mm | NA |
| Minimum Ground Clearance | 310 mm | 380 mm |
| Slew Ground Clearance | 510 mm | NA |
| Height of Cabin | 2870 mm | 2800 mm |
| Overall Height | 3610 mm | 3850 mm |
| Track Width-Rear | 1730 mm | 1700 mm |
| Track Width-Front | 1860 mm | 1880 mm |
| Width Over Bucket | 2350 mm | 2800 mm |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Model | |
| JCB 74 HP | Ashok Leyland 74 HP |
| Type | |
| 4 cylinder; water cooled; Turbocharged with EGR and aftertreatment system DOC and DPF. | Tier 4B/ CEV BS-IV; 4 Cylinders; Turbocharged Intercooled; Electronic; Common Rail Direct Injection |
| Gross Power | |
| 74 HP (55 kW) @ 2200 RPM | 74 HP (54.4 kW) @ 2200 RPM |
| Max Torque | |
| 440 Nm @ 1150 RPM | 340 Nm @ 1400 -1500 RPM |
| Displacement | |
| 3.0 L | 3.84 L |
| Battery | |
| 12V | 12V / 110 Ah |
| Alternator | |
| 130A | NA |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Type | |
| JCB synchroshuttle transmission | CARRARO 2WD; 4F-4R Power Shuttle Synchromesh Transmission |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Type | |
| Power track steering rod system provides equal turn steering & quick response with less operating force. | Power Steering |
| Working Pressure | |
| 160 bar | 140 bar |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Inner Wheels Braked - Outside Loader Bucket | |
| 8640 mm | 9800 mm |
| Inner Wheels Braked - Outside Wheels | |
| 6200 mm | NA |
| Inner Wheels not Braked - Outside Loader Bucket | |
| 11600 mm | 11200 mm |
| Inner Wheels not Braked - Outside Wheels | |
| 8940 mm | NA |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Service | |
| JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water etc. requiring no maintenance. | Hydraulic foot operated; 2 disc per side |
| Parking | |
| Hand operated; disc brakes on rear axle input disc. | Mechanically actuated caliper type brake pack on Rear axle input shaft |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Front | |
| 9 x 16 - 16 PR | 9 x 16 - 16 PR |
| Rear | |
| 16.9 x 28 - 12 PR (Industrial) | 16.9 x 28 - 12 PR |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Forward- 1st gear | |
| 6.5 km/hr | 5.8 km/hr |
| Reverse- 1st gear | |
| 6.5 km/hr | 6.8 km/hr |
| Forward- 2nd gear | |
| 10.5 km/hr | 9.3 Km.h |
| Reverse- 2nd gear | |
| 10.5 km/hr | 10.8 km/hr |
| Forward- 3rd gear | |
| 19.8 km/hr | 19.5 km/hr |
| Reverse- 3rd gear | |
| Not Recommeded | 22.1 km/hr |
| Forward- 4th gear | |
| 36 km/hr | 35.0 km/hr |
| Reverse- 4th gear | |
| Not Recommeded | Not recommended |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Type | |
| Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. | Open Center Load Sensing; Variable Displacement Pump |
| Maximum Pump Flow | |
| 114 L/min @ 2000 RPM | 146 L/min |
| System Pressure | |
| 270 bar | 210 bar |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Rear Axle | |
| Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. | CARRARO 28.32M |
| Front Axle | |
| Steer axle; centrally pivoted; with oscillation angle of 16 | CNH PS1300 (2WD) |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Fuel Tank | |
| 128 L | 129 L |
| Engine Coolant | |
| 20.5 L | 20 L |
| Engine Oil | |
| 15 L | 9.1 L |
| Hydraulic Tank | |
| NA | 80 L |
| Hydraulic System | |
| 92 L | 107 L |
| Transmission | |
| 17.5 L | 18 L |
| Rear Axle | |
| 20 L | 17.1 L |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Maximum Digging Depth | |
| 4770 mm | 4700 mm |
| Reach-Ground Level to Rear Wheel Centre | |
| 6720 mm | 7220 mm |
| Reach-Ground Level to Slew Centre | |
| 5400 mm | 5895 mm |
| Reach at Full Height to Slew Centre | |
| 2900 mm | 2400 mm |
| Side Reach to Centre Line of Machine | |
| 6020 mm | NA |
| Maximum Working Height | |
| 5970 mm | 5700 mm |
| Maximum Load Over Height | |
| 4180 mm | 3800 mm |
| Bucket Rotation Angle | |
| 185° | 204° |
| Bucket Digging force | |
| 5959 kgf | 5616 kgf |
| Arm Digging force | |
| 3257 kgf | 3780 kgf |
| Maximum Lift Capacity | |
| 1490 kg | 1545 kg |
| Standard Bucket Capacity | |
| 0.26 m³ | 0.30 m³ |
| Standard Bucket Width | |
| 790 mm | NA |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Dump Height | |
| 2740 mm | 2730 mm |
| Load Over Height | |
| 3320 mm | 3300 mm |
| Pin Height | |
| 3540 mm | 3600 mm |
| Pin Forward Reach | |
| 250 mm | 240 mm |
| Reach At Ground | |
| 1520 mm | 1980 mm |
| Maximum Reach at Full Height | |
| 1150 mm | 1190 mm |
| Max Reach Full Height Dumped | |
| 880 mm | 760 mm |
| Below Ground Level Dig Depth | |
| 70 mm | 110 mm |
| Rollback at Ground | |
| 45° | 33° |
| Dump Angle | |
| 38° | 45° |
| Shovel Breakout Force | |
| 5272 kgf | 6250 kgf |
| Loader Arm Breakout Force | |
| 5635 kgf | 5115 kgf |
| Maximum Payload | |
| 1800 kg | 1925 kg |
| JCB 3DX Plus | CASE 770 EX Plus |
|---|---|
| Machine Weight | |
| 7510 kg | 7955-8015 kg |
| Overall Length | |
| 6000 mm | 5960 mm |
| Wheelbase | |
| 2170 mm | 2180 mm |
| Slew Centre to Rear Axle Centre | |
| 1320 mm | NA |
| Minimum Ground Clearance | |
| 310 mm | 380 mm |
| Slew Ground Clearance | |
| 510 mm | NA |
| Height of Cabin | |
| 2870 mm | 2800 mm |
| Overall Height | |
| 3610 mm | 3850 mm |
| Track Width-Rear | |
| 1730 mm | 1700 mm |
| Track Width-Front | |
| 1860 mm | 1880 mm |
| Width Over Bucket | |
| 2350 mm | 2800 mm |
© 2025 Desi Machines All rights reserved.
Designed & Developed by PromotEdge
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
