The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | JCB 3DX Plus | CASE 770 NX CEV5 |
|---|
| Particulars | JCB 3DX Plus | CASE 770 NX CEV5 |
|---|
The JCB 3DX Plus and CASE 770 NX CEV5 are both formidable backhoe loaders with robust features tailored for construction and excavation. JCB 3DX Plus promises advanced hydraulics and superb control with its Q brakes, while the CASE 770 NX CEV5 focuses on environmental compliance and a stronger payload capacity.
Your choice between JCB 3DX Plus and CASE 770 NX CEV5 should depend on specific requirements. If you prioritize advanced hydraulics, a slightly better operating range, and performance, the JCB may be the way to go. However, if environmental considerations, fuel capacity, and carrying a heavier payload are more critical for your operations, the CASE will serve you well despite a higher cost.
| Brand | JCB Backhoe Loader | CASE Backhoe Loader |
|---|---|---|
| Type | 2WD/4WD | 2WD/4WD |
| Price | ₹ 35-39 Lakhs | ₹ 33 - 36 Lakhs |
| Engine | JCB 74 HP | CNH 74 HP |
| Bucket | 0.26 m³ | 0.26 m³ |
| Shovel | 1.1 m³ | 1.1 m³ |
| Max Digging Depth | 4770 mm | 4400 mm |
| Max Dump Height | 2740 mm | 2730 mm |
| Weight | 7510 Kg | 7600 kg |
| Quick Overview: | The JCB 3DX Plus Backhoe Loader delivers strong performance and efficiency with a 74 HP Stage 5-430 DieselMax engine producing high torque for demanding job sites. Available in 2WD, 4WD, and 4WD high-dump variants, it supports construction, excavation, loading, and material handling work. The machine offers a 1.1 cu.m loader bucket and optimized hydraulics for higher productivity. With a comfortable ROPS/FOPS cabin, low fuel consumption, and easy maintenance, the JCB 3DX Plus price in India typically ranges between ₹35 lakh and ₹39 lakh (ex-showroom) from JCB. |
The CASE 770 NX CEV5 Backhoe Loader is a 74 HP machine designed for exceptional performance on today’s construction, excavation, and material-handling jobs. The high-performance machine’s 0.26 m³ bucket, 1.1 m³ shovel, and 4400 mm digging depth will provide sustainable digging and accurate loading. With an operating weight of 7600 kg and a dump height of 2730 mm, the machine will allow balanced and productive cycles on-site. Designed according to CEV Stage V guidelines, the CASE 770 NX delivers reliability, functionality, and performance for varying job-site conditions. |
The JCB 3DX Plus and CASE 770 NX CEV5 are both formidable backhoe loaders with robust features tailored for construction and excavation. JCB 3DX Plus promises advanced hydraulics and superb control with its Q brakes, while the CASE 770 NX CEV5 focuses on environmental compliance and a stronger payload capacity.
Your choice between JCB 3DX Plus and CASE 770 NX CEV5 should depend on specific requirements. If you prioritize advanced hydraulics, a slightly better operating range, and performance, the JCB may be the way to go. However, if environmental considerations, fuel capacity, and carrying a heavier payload are more critical for your operations, the CASE will serve you well despite a higher cost.
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Brand | |
| JCB Backhoe Loader | CASE Backhoe Loader |
| Type | |
| 2WD/4WD | 2WD/4WD |
| Price | |
| ₹ 35-39 Lakhs | ₹ 33 - 36 Lakhs |
| Engine | |
| JCB 74 HP | CNH 74 HP |
| Bucket | |
| 0.26 m³ | 0.26 m³ |
| Shovel | |
| 1.1 m³ | 1.1 m³ |
| Max Digging Depth | |
| 4770 mm | 4400 mm |
| Max Dump Height | |
| 2740 mm | 2730 mm |
| Weight | |
| 7510 Kg | 7600 kg |
| Quick Overview: | |
The JCB 3DX Plus Backhoe Loader delivers strong performance and efficiency with a 74 HP Stage 5-430 DieselMax engine producing high torque for demanding job sites. Available in 2WD, 4WD, and 4WD high-dump variants, it supports construction, excavation, loading, and material handling work. The machine offers a 1.1 cu.m loader bucket and optimized hydraulics for higher productivity. With a comfortable ROPS/FOPS cabin, low fuel consumption, and easy maintenance, the JCB 3DX Plus price in India typically ranges between ₹35 lakh and ₹39 lakh (ex-showroom) from JCB. |
The CASE 770 NX CEV5 Backhoe Loader is a 74 HP machine designed for exceptional performance on today’s construction, excavation, and material-handling jobs. The high-performance machine’s 0.26 m³ bucket, 1.1 m³ shovel, and 4400 mm digging depth will provide sustainable digging and accurate loading. With an operating weight of 7600 kg and a dump height of 2730 mm, the machine will allow balanced and productive cycles on-site. Designed according to CEV Stage V guidelines, the CASE 770 NX delivers reliability, functionality, and performance for varying job-site conditions. |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Engine Make | JCB 430 | CNH Industrial (India) F28-CF28A001A*U |
| Fuel Tank | 128 L | 129 L |
| Max Torque | 440 Nm @ 1150 RPM | 375 Nm @ 1400 RPM |
| Max Speed | 36 km/hr | 34.0 km/hr |
| Hydraulic System | 92 L | 96 L |
| Max Working Height | 5970 mm | 5500 mm |
| Excavator Max Lift Capacity | 1490 kg | 1417 kg |
| Loader Load Over Height | 4180 mm | 3600 mm |
| Overall Length | 6000 mm | 5800 mm |
| Wheel Base | 2170 mm | 2180 mm |
| Bucket Digging Force | 5959 kgf | 5000 kgf (204°) / 6050 kgf (160°) |
| Shovel Breakout Force | 5272 kgf | 5400 kgf |
| Warranty | 1 Yr. / 2000 hr. | 1 Year |
| AC Cabin | Optional | Optional |
| GPS | Standard | Standard |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Engine Make | |
| JCB 430 | CNH Industrial (India) F28-CF28A001A*U |
| Fuel Tank | |
| 128 L | 129 L |
| Max Torque | |
| 440 Nm @ 1150 RPM | 375 Nm @ 1400 RPM |
| Max Speed | |
| 36 km/hr | 34.0 km/hr |
| Hydraulic System | |
| 92 L | 96 L |
| Max Working Height | |
| 5970 mm | 5500 mm |
| Excavator Max Lift Capacity | |
| 1490 kg | 1417 kg |
| Loader Load Over Height | |
| 4180 mm | 3600 mm |
| Overall Length | |
| 6000 mm | 5800 mm |
| Wheel Base | |
| 2170 mm | 2180 mm |
| Bucket Digging Force | |
| 5959 kgf | 5000 kgf (204°) / 6050 kgf (160°) |
| Shovel Breakout Force | |
| 5272 kgf | 5400 kgf |
| Warranty | |
| 1 Yr. / 2000 hr. | 1 Year |
| AC Cabin | |
| Optional | Optional |
| GPS | |
| Standard | Standard |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Model | JCB 74 HP | CNH 74 HP |
| Type | 4 cylinder; water cooled; Turbocharged with EGR and aftertreatment system DOC and DPF. | CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection |
| Gross Power | 74 HP (55 kW) @ 2200 RPM | 74 HP (54.6 kW) @ 2200 RPM |
| Max Torque | 440 Nm @ 1150 RPM | 375 Nm @ 1400 RPM |
| Displacement | 3.0 L | 2.80 L |
| Battery | 12V | 12V / 110 Ah |
| Alternator | 130A | NA |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Type | JCB synchroshuttle transmission | CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Type | Power track steering rod system provides equal turn steering & quick response with less operating force. | Power Steering |
| Working Pressure | 160 bar | 140 bar |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Inner Wheels Braked - Outside Loader Bucket | 8640 mm | 4600 mm (2WD) / 4900 (4WD) |
| Inner Wheels Braked - Outside Wheels | 6200 mm | NA |
| Inner Wheels not Braked - Outside Loader Bucket | 11600 mm | 5500 mm (2WD) / 5600 mm (4WD) |
| Inner Wheels not Braked - Outside Wheels | 8940 mm | NA |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Service | JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water etc. requiring no maintenance. | Hydraulic foot operated, 2 disc per side |
| Parking | Hand operated; disc brakes on rear axle input disc. | Mechanically actuated calipper type brake pack on rear axle input shaft |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Front | 9 x 16 - 16 PR | 9x16 - 16PR |
| Rear | 16.9 x 28 - 12 PR (Industrial) | 16.9 x 28 - 12 PR |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Forward- 1st gear | 6.5 km/hr | 5.7 km/hr |
| Reverse- 1st gear | 6.5 km/hr | 7.0 km/hr |
| Forward- 2nd gear | 10.5 km/hr | 9.3 km/hr |
| Reverse- 2nd gear | 10.5 km/hr | 11.5 km/hr |
| Forward- 3rd gear | 19.8 km/hr | 19.5 km/hr |
| Reverse- 3rd gear | Not Recommeded | Not recommended |
| Forward- 4th gear | 36 km/hr | 34.0 km/hr |
| Reverse- 4th gear | Not Recommeded | Not Recommened |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Type | Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. | Open Center Load Sensing , Variable Displacement Pump |
| Maximum Pump Flow | 114 L/min @ 2000 RPM | 119 L/min |
| System Pressure | 270 bar | 240 bar |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Rear Axle | Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. | CARRARO 28.32M |
| Front Axle | Steer axle; centrally pivoted; with oscillation angle of 16 | CNH PS1300 |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Fuel Tank | 128 L | 129 L |
| Engine Coolant | 20.5 L | 10 L |
| Engine Oil | 15 L | 8.5 L |
| Hydraulic Tank | NA | NA |
| Hydraulic System | 92 L | 96 L |
| Transmission | 17.5 L | 18 L |
| Rear Axle | 20 L | 17.1 L |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Maximum Digging Depth | 4770 mm | 4400 mm |
| Reach-Ground Level to Rear Wheel Centre | 6720 mm | 6950 mm |
| Reach-Ground Level to Slew Centre | 5400 mm | 5630 mm |
| Reach at Full Height to Slew Centre | 2900 mm | 2150 mm |
| Side Reach to Centre Line of Machine | 6020 mm | NA |
| Maximum Working Height | 5970 mm | 5500 mm |
| Maximum Load Over Height | 4180 mm | 3600 mm |
| Bucket Rotation Angle | 185° | 204° & 160° |
| Bucket Digging force | 5959 kgf | 5000 kgf (204°) / 6050 kgf (160°) |
| Arm Digging force | 3257 kgf | 3200 kgf |
| Maximum Lift Capacity | 1490 kg | 1417 kg |
| Standard Bucket Capacity | 0.26 m³ | 0.26 m³ |
| Standard Bucket Width | 790 mm | NA |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Dump Height | 2740 mm | 2730 mm |
| Load Over Height | 3320 mm | 3300 mm |
| Pin Height | 3540 mm | 3600 mm |
| Pin Forward Reach | 250 mm | 240 mm |
| Reach At Ground | 1520 mm | 1980 mm |
| Maximum Reach at Full Height | 1150 mm | 1190 mm |
| Max Reach Full Height Dumped | 880 mm | 760 mm |
| Below Ground Level Dig Depth | 70 mm | 110 mm |
| Rollback at Ground | 45° | 33° |
| Dump Angle | 38° | 45° |
| Shovel Breakout Force | 5272 kgf | 5400 kgf |
| Loader Arm Breakout Force | 5635 kgf | 5250 kgf |
| Maximum Payload | 1800 kg | 1925 kg |
| JCB 3DX Plus | CASE 770 NX CEV5 | |
| Machine Weight | 7510 kg | 7600 kg |
| Overall Length | 6000 mm | 5800 mm |
| Wheelbase | 2170 mm | 2180 mm |
| Slew Centre to Rear Axle Centre | 1320 mm | NA |
| Minimum Ground Clearance | 310 mm | 380 mm |
| Slew Ground Clearance | 510 mm | NA |
| Height of Cabin | 2870 mm | 2830 mm |
| Overall Height | 3610 mm | 3850 mm |
| Track Width-Rear | 1730 mm | 1700 mm |
| Track Width-Front | 1860 mm | 1880 mm |
| Width Over Bucket | 2350 mm | 2280 mm |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Model | |
| JCB 74 HP | CNH 74 HP |
| Type | |
| 4 cylinder; water cooled; Turbocharged with EGR and aftertreatment system DOC and DPF. | CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection |
| Gross Power | |
| 74 HP (55 kW) @ 2200 RPM | 74 HP (54.6 kW) @ 2200 RPM |
| Max Torque | |
| 440 Nm @ 1150 RPM | 375 Nm @ 1400 RPM |
| Displacement | |
| 3.0 L | 2.80 L |
| Battery | |
| 12V | 12V / 110 Ah |
| Alternator | |
| 130A | NA |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Type | |
| JCB synchroshuttle transmission | CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Type | |
| Power track steering rod system provides equal turn steering & quick response with less operating force. | Power Steering |
| Working Pressure | |
| 160 bar | 140 bar |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Inner Wheels Braked - Outside Loader Bucket | |
| 8640 mm | 4600 mm (2WD) / 4900 (4WD) |
| Inner Wheels Braked - Outside Wheels | |
| 6200 mm | NA |
| Inner Wheels not Braked - Outside Loader Bucket | |
| 11600 mm | 5500 mm (2WD) / 5600 mm (4WD) |
| Inner Wheels not Braked - Outside Wheels | |
| 8940 mm | NA |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Service | |
| JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water etc. requiring no maintenance. | Hydraulic foot operated, 2 disc per side |
| Parking | |
| Hand operated; disc brakes on rear axle input disc. | Mechanically actuated calipper type brake pack on rear axle input shaft |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Front | |
| 9 x 16 - 16 PR | 9x16 - 16PR |
| Rear | |
| 16.9 x 28 - 12 PR (Industrial) | 16.9 x 28 - 12 PR |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Forward- 1st gear | |
| 6.5 km/hr | 5.7 km/hr |
| Reverse- 1st gear | |
| 6.5 km/hr | 7.0 km/hr |
| Forward- 2nd gear | |
| 10.5 km/hr | 9.3 km/hr |
| Reverse- 2nd gear | |
| 10.5 km/hr | 11.5 km/hr |
| Forward- 3rd gear | |
| 19.8 km/hr | 19.5 km/hr |
| Reverse- 3rd gear | |
| Not Recommeded | Not recommended |
| Forward- 4th gear | |
| 36 km/hr | 34.0 km/hr |
| Reverse- 4th gear | |
| Not Recommeded | Not Recommened |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Type | |
| Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. | Open Center Load Sensing , Variable Displacement Pump |
| Maximum Pump Flow | |
| 114 L/min @ 2000 RPM | 119 L/min |
| System Pressure | |
| 270 bar | 240 bar |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Rear Axle | |
| Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. | CARRARO 28.32M |
| Front Axle | |
| Steer axle; centrally pivoted; with oscillation angle of 16 | CNH PS1300 |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Fuel Tank | |
| 128 L | 129 L |
| Engine Coolant | |
| 20.5 L | 10 L |
| Engine Oil | |
| 15 L | 8.5 L |
| Hydraulic Tank | |
| NA | NA |
| Hydraulic System | |
| 92 L | 96 L |
| Transmission | |
| 17.5 L | 18 L |
| Rear Axle | |
| 20 L | 17.1 L |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Maximum Digging Depth | |
| 4770 mm | 4400 mm |
| Reach-Ground Level to Rear Wheel Centre | |
| 6720 mm | 6950 mm |
| Reach-Ground Level to Slew Centre | |
| 5400 mm | 5630 mm |
| Reach at Full Height to Slew Centre | |
| 2900 mm | 2150 mm |
| Side Reach to Centre Line of Machine | |
| 6020 mm | NA |
| Maximum Working Height | |
| 5970 mm | 5500 mm |
| Maximum Load Over Height | |
| 4180 mm | 3600 mm |
| Bucket Rotation Angle | |
| 185° | 204° & 160° |
| Bucket Digging force | |
| 5959 kgf | 5000 kgf (204°) / 6050 kgf (160°) |
| Arm Digging force | |
| 3257 kgf | 3200 kgf |
| Maximum Lift Capacity | |
| 1490 kg | 1417 kg |
| Standard Bucket Capacity | |
| 0.26 m³ | 0.26 m³ |
| Standard Bucket Width | |
| 790 mm | NA |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Dump Height | |
| 2740 mm | 2730 mm |
| Load Over Height | |
| 3320 mm | 3300 mm |
| Pin Height | |
| 3540 mm | 3600 mm |
| Pin Forward Reach | |
| 250 mm | 240 mm |
| Reach At Ground | |
| 1520 mm | 1980 mm |
| Maximum Reach at Full Height | |
| 1150 mm | 1190 mm |
| Max Reach Full Height Dumped | |
| 880 mm | 760 mm |
| Below Ground Level Dig Depth | |
| 70 mm | 110 mm |
| Rollback at Ground | |
| 45° | 33° |
| Dump Angle | |
| 38° | 45° |
| Shovel Breakout Force | |
| 5272 kgf | 5400 kgf |
| Loader Arm Breakout Force | |
| 5635 kgf | 5250 kgf |
| Maximum Payload | |
| 1800 kg | 1925 kg |
| JCB 3DX Plus | CASE 770 NX CEV5 |
|---|---|
| Machine Weight | |
| 7510 kg | 7600 kg |
| Overall Length | |
| 6000 mm | 5800 mm |
| Wheelbase | |
| 2170 mm | 2180 mm |
| Slew Centre to Rear Axle Centre | |
| 1320 mm | NA |
| Minimum Ground Clearance | |
| 310 mm | 380 mm |
| Slew Ground Clearance | |
| 510 mm | NA |
| Height of Cabin | |
| 2870 mm | 2830 mm |
| Overall Height | |
| 3610 mm | 3850 mm |
| Track Width-Rear | |
| 1730 mm | 1700 mm |
| Track Width-Front | |
| 1860 mm | 1880 mm |
| Width Over Bucket | |
| 2350 mm | 2280 mm |
Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.