Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|
| Particulars | XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|
When comparing the Sany SY215C-9LC SPARC with the XCMG XE215i-K LC excavators, users will notice subtle differences in specs such as engine power, max digging depth, and swing speed. Both offer features like AC cabins and Cummins engines, but they have differing capabilities that may affect their suitability for specific tasks.
The selection between Sany SY215C-9LC SPARC and XCMG XE215i-K LC should be based on the specific requirements of the project. If integrated technology and slightly higher stability are priorities, go with the Sany model. If you prioritize deeper digging capabilities and a higher hydraulic capacity, the XCMG model could be the better choice.
| Brand | XCMG | SANY |
|---|---|---|
| Type | Medium (15-25 Ton) | Medium (15-25 Ton) |
| Operating Cost | ₹ 55-57 Lakhs | ₹ 58-59 Lakhs |
| Price | ₹ 55-57 Lakhs | ₹ 58-59 Lakhs |
| Weight | 21500 kg | 21400 Kg |
| Bucket | 0.9 - 1.2 m³ | 1.1 m³ |
| Max Digging Depth | 6197 mm | 6037 mm |
| Engine | Cummins 141.4 HP | Cummins 140 HP |
| Warranty | 1 Yr. / 2500 hr. | 1 Yr. / 2500 hr. |
| Boom | 5680 mm | 5700 mm |
| Quick Overview: | Designed for precision, XE215i-K LC medium excavator from XCMG is suitable for earthmoving and construction tasks. |
Combining cutting-edge functionality with precision control the Sany SY215C-9LC PPARC medium excavator is in demand for construction projects. |
| Agency review | Get the best price for the XCMG XE215i-K LC Medium Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the Sany SY215C-9LC SPARC Medium Excavator from authorized dealers. Contact us now for exclusive deals! |
When comparing the Sany SY215C-9LC SPARC with the XCMG XE215i-K LC excavators, users will notice subtle differences in specs such as engine power, max digging depth, and swing speed. Both offer features like AC cabins and Cummins engines, but they have differing capabilities that may affect their suitability for specific tasks.
The selection between Sany SY215C-9LC SPARC and XCMG XE215i-K LC should be based on the specific requirements of the project. If integrated technology and slightly higher stability are priorities, go with the Sany model. If you prioritize deeper digging capabilities and a higher hydraulic capacity, the XCMG model could be the better choice.
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Brand | |
| XCMG | SANY |
| Type | |
| Medium (15-25 Ton) | Medium (15-25 Ton) |
| Price | |
| ₹ 55-57 Lakhs | ₹ 58-59 Lakhs |
| Weight | |
| 21500 kg | 21400 Kg |
| Bucket | |
| 0.9 - 1.2 m³ | 1.1 m³ |
| Max Digging Depth | |
| 6197 mm | 6037 mm |
| Engine | |
| Cummins 141.4 HP | Cummins 140 HP |
| Warranty | |
| 1 Yr. / 2500 hr. | 1 Yr. / 2500 hr. |
| Boom | |
| 5680 mm | 5700 mm |
| Quick Overview: | |
Designed for precision, XE215i-K LC medium excavator from XCMG is suitable for earthmoving and construction tasks. |
Combining cutting-edge functionality with precision control the Sany SY215C-9LC PPARC medium excavator is in demand for construction projects. |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Engine Make | Cummins 6BT5.9 | Cummins 6BT5.9-C140 |
| Fuel Tank | 360 L | 340 L |
| Engine Displacment | 5.9 L | 5.88 L |
| Under Carriage | 4445 mm | 4250 mm |
| Hydraulic System | 300 L | 180 L |
| Arm | 2400 mm | 2400 mm |
| Max Digging Reach | 9440 mm | 9312 mm |
| Fuel Consumption | NA | NA |
| Overall Width | 2990 mm | 2980 mm |
| Overall Length | 9582 mm | 9395 mm |
| Bucket Digging Force | NA | 138 kN |
| Tailswing Radius | 2728 mm | 2720 mm |
| Track Shoe Width | 600 mm | 600 mm |
| AC Cabin | Standard | Standard |
| GPS | Not Available | Standard |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Engine Make | |
| Cummins 6BT5.9 | Cummins 6BT5.9-C140 |
| Fuel Tank | |
| 360 L | 340 L |
| Engine Displacment | |
| 5.9 L | 5.88 L |
| Under Carriage | |
| 4445 mm | 4250 mm |
| Hydraulic System | |
| 300 L | 180 L |
| Arm | |
| 2400 mm | 2400 mm |
| Max Digging Reach | |
| 9440 mm | 9312 mm |
| Fuel Consumption | |
| NA | NA |
| Overall Width | |
| 2990 mm | 2980 mm |
| Overall Length | |
| 9582 mm | 9395 mm |
| Bucket Digging Force | |
| NA | 138 kN |
| Tailswing Radius | |
| 2728 mm | 2720 mm |
| Track Shoe Width | |
| 600 mm | 600 mm |
| AC Cabin | |
| Standard | Standard |
| GPS | |
| Not Available | Standard |
| 3666 | 3606 | |
| Model | Cummins 141.4 HP | Cummins 140 HP |
| Fuel | Diesel | Diesel |
| Type | 6 Cylinder Turbocharged | 6 Cylinder , inline , Water Cooled |
| Rated Engine Power | 141.4 HP (105.5 kW) @ 2000 rpm | 140 HP (104 kW) @ 2000 rpm |
| Maximum Torque | 564 Nm @ 1600 rpm | 571 Nm @ 1300 rpm |
| Piston Displacement | 5.9 L | 5.88 L |
| Alternator | NA | 50A |
| Battery | 12 V x 2 | 2 x 12V |
| Starting Motor | NA | 24V - 4.35 kW |
| 24V - 4.35 kW | 24V - 4.35 kW | |
| No of Top rollers | 2 | 2 |
| No of bottom rollers | 9 | 8 |
| Track Shoes (Each Side) | 49 | 47 |
| Track Guard | NA | 1 |
| Track Shoe width | 600 mm | 600 mm |
| Ground bearing pressure | NA | 47 kPa |
| Track Tensioning | Grease | Grease |
| Gradeability | 35° | 70% (35°) |
| Travel Speed-Low | 2.8 Km/h | 3.3 Km/h |
| Travel Speed-High | 5.2 km/h | 5.4 Km/h |
| Max Tracking Force | 184 kN | 209 kN |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Hydraulic pump | 2 Variable Axle Piston Pumps | 2 Variable Displacement Axial Piston Pumps |
| Maximum Flow | 448 L/min | 2 x 220 L/min |
| Pilot Pump | 1 Gear Pump | 1 Gear Pump |
| Implement Circuit | 34.3 MPa / 37 MPa | 34.3 MPa |
| Swing Circuit | 28 MPa | 25.5 MPa |
| Travel circuit | 34.3 MPa | 34.3 MPa |
| Pilot circuit | 3.9 MPa | 3.9 MPa |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Travel | NA | 2 Axial Piston Motor With Parking Brake |
| Swing | NA | 1 Axial Piston Motor with swing holding brake |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Fuel tank | 360 L | 340 L |
| Engine Coolant | 23 L | 25.2 L |
| Engine oil | 16 L | 22.75 L |
| Hydraulic system | 300 L | 180 L |
| Hydraulic tank | 220 L | 239 L |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Operating Weight | 21500 kg | 21400 Kg |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Boom length | 5680 mm | 5700 mm |
| Arm length | 2400 mm | 2400 mm |
| Max Digging Reach | 9440 mm | 9312 mm |
| Max Digging Reach on ground | NA | NA |
| Max digging depth | 6197 mm | 6037 mm |
| Max digging height | 9245 mm | 9113 mm |
| Max Dump Height | 6440 mm | 6252 mm |
| Max vertical wallcut depth | 5575 mm | NA |
| Min swing radius | 3515 mm | 3730 mm |
| Max Height at Min Swing radius | NA | 7680 mm |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | NA | 138 kN |
| Arm Digging Force | NA | 129 kN |
| Swing Speed | 13 rpm | 11 rpm |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | NA | NA |
| Approach Angle | NA | NA |
| Width | NA | NA |
| Height | NA | NA |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Bucket Capacity | 0.9 - 1.2 m³ | 1.1 m³ |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC | |
| Overall Length | 9582 mm | 9395 mm |
| Overall width | 2990 mm | 2980 mm |
| Overall Height | 3034 mm | 2955 mm |
| Overall Height of Cab | NA | 2930 mm |
| Upper Width | 2710 mm | 2840 mm |
| Track Lengh on Ground | 3647 mm | 3445 mm |
| Undercarriage overall length | 4445 mm | 4250 mm |
| Tailswing radius | 2728 mm | 2720 mm |
| Min Ground clearance | 477 mm | 465 mm |
| Track gauge | 2390 mm | 2380 mm |
| Width over tracks | 2990 mm | NA |
| Track Height | 937 mm | NA |
| Counterweight Clearance | 1000 mm | NA |
| Track Shoe Width | 600 mm | 600 mm |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Model | |
| Cummins 141.4 HP | Cummins 140 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 6 Cylinder Turbocharged | 6 Cylinder , inline , Water Cooled |
| Rated Engine Power | |
| 141.4 HP (105.5 kW) @ 2000 rpm | 140 HP (104 kW) @ 2000 rpm |
| Maximum Torque | |
| 564 Nm @ 1600 rpm | 571 Nm @ 1300 rpm |
| Piston Displacement | |
| 5.9 L | 5.88 L |
| Alternator | |
| NA | 50A |
| Battery | |
| 12 V x 2 | 2 x 12V |
| Starting Motor | |
| NA | 24V - 4.35 kW |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| No of Top rollers | |
| 2 | 2 |
| No of bottom rollers | |
| 9 | 8 |
| Track Shoes (Each Side) | |
| 49 | 47 |
| Track Guard | |
| NA | 1 |
| Track Shoe width | |
| 600 mm | 600 mm |
| Ground bearing pressure | |
| NA | 47 kPa |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 35° | 70% (35°) |
| Travel Speed-Low | |
| 2.8 Km/h | 3.3 Km/h |
| Travel Speed-High | |
| 5.2 km/h | 5.4 Km/h |
| Max Tracking Force | |
| 184 kN | 209 kN |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Hydraulic pump | |
| 2 Variable Axle Piston Pumps | 2 Variable Displacement Axial Piston Pumps |
| Maximum Flow | |
| 448 L/min | 2 x 220 L/min |
| Pilot Pump | |
| 1 Gear Pump | 1 Gear Pump |
| Implement Circuit | |
| 34.3 MPa / 37 MPa | 34.3 MPa |
| Swing Circuit | |
| 28 MPa | 25.5 MPa |
| Travel circuit | |
| 34.3 MPa | 34.3 MPa |
| Pilot circuit | |
| 3.9 MPa | 3.9 MPa |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Fuel tank | |
| 360 L | 340 L |
| Engine Coolant | |
| 23 L | 25.2 L |
| Engine oil | |
| 16 L | 22.75 L |
| Hydraulic system | |
| 300 L | 180 L |
| Hydraulic tank | |
| 220 L | 239 L |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Operating Weight | |
| 21500 kg | 21400 Kg |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Boom length | |
| 5680 mm | 5700 mm |
| Arm length | |
| 2400 mm | 2400 mm |
| Max Digging Reach | |
| 9440 mm | 9312 mm |
| Max Digging Reach on ground | |
| NA | NA |
| Max digging depth | |
| 6197 mm | 6037 mm |
| Max digging height | |
| 9245 mm | 9113 mm |
| Max Dump Height | |
| 6440 mm | 6252 mm |
| Max vertical wallcut depth | |
| 5575 mm | NA |
| Min swing radius | |
| 3515 mm | 3730 mm |
| Max Height at Min Swing radius | |
| NA | 7680 mm |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| NA | 138 kN |
| Arm Digging Force | |
| NA | 129 kN |
| Swing Speed | |
| 13 rpm | 11 rpm |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| NA | NA |
| Approach Angle | |
| NA | NA |
| Width | |
| NA | NA |
| Height | |
| NA | NA |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Bucket Capacity | |
| 0.9 - 1.2 m³ | 1.1 m³ |
| XCMG XE215i-K LC | Sany SY215C-9LC SPARC |
|---|---|
| Overall Length | |
| 9582 mm | 9395 mm |
| Overall width | |
| 2990 mm | 2980 mm |
| Overall Height | |
| 3034 mm | 2955 mm |
| Overall Height of Cab | |
| NA | 2930 mm |
| Upper Width | |
| 2710 mm | 2840 mm |
| Track Lengh on Ground | |
| 3647 mm | 3445 mm |
| Undercarriage overall length | |
| 4445 mm | 4250 mm |
| Tailswing radius | |
| 2728 mm | 2720 mm |
| Min Ground clearance | |
| 477 mm | 465 mm |
| Track gauge | |
| 2390 mm | 2380 mm |
| Width over tracks | |
| 2990 mm | NA |
| Track Height | |
| 937 mm | NA |
| Counterweight Clearence | |
| 1000 mm | NA |
| Track Shoe Width | |
| 600 mm | 600 mm |
© 2025 Desi Machines All rights reserved.
Designed & Developed by PromotEdge
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
