Add Equipment
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.
| Key Highlights | Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|
| Particulars | Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|
Comparing the Sany SY500C-10HD and the Komatsu PC450LC-7 presents a scenario of two competent and similarly-sized heavy excavators, each with its strengths. The Sany model boasts a more powerful engine and a higher bucket capacity, while the Komatsu has a slightly deeper digging depth and lower ground bearing pressure.
The choice between the Sany SY500C-10HD and Komatsu PC450LC-7 largely depends on the specific job requirements and conditions. If needing higher power and bigger loads per cycle, go for the Sany. If the project involves working on softer surfaces or requires deeper digging, the Komatsu might be the better fit.
| Brand | SANY | L&T Komatsu |
|---|---|---|
| Type | Large (25-50 Ton) | Large (25-50 Ton) |
| Operating Cost | ₹ 1.75-1.78 Crore | Price Available Soon |
| Price | ₹ 1.75-1.78 Crore | Price Available Soon |
| Weight | 49500 Kg | 45000 Kg |
| Bucket | 3.1 m³ | 2.6 - 3.1 m³ |
| Max Digging Depth | 6600 mm | 7040 mm |
| Engine | Isuzu 403 HP | Komatsu 330 HP |
| Warranty | 1 Yr. / 2500 hr. | 1 Yr. / 3000 hr. |
| Boom | 6550 mm | 7060 mm |
| Quick Overview: | Sany SY500C-10HD large excavator expertise in heavy-duty construction and mining tasks ensuring reliability and durability. |
Komatsu PC450LC-7 is a large excavator that unites power with precision, made for tough mining and heavy-duty construction projects. |
| Agency review | Get the best price for the Sany SY500C-10HD Large Excavator from authorized dealers. Contact us now for exclusive deals! |
Get the best price for the Komatsu PC450LC-7 Large Excavator from authorized dealers. Contact us now for exclusive deals! |
Comparing the Sany SY500C-10HD and the Komatsu PC450LC-7 presents a scenario of two competent and similarly-sized heavy excavators, each with its strengths. The Sany model boasts a more powerful engine and a higher bucket capacity, while the Komatsu has a slightly deeper digging depth and lower ground bearing pressure.
The choice between the Sany SY500C-10HD and Komatsu PC450LC-7 largely depends on the specific job requirements and conditions. If needing higher power and bigger loads per cycle, go for the Sany. If the project involves working on softer surfaces or requires deeper digging, the Komatsu might be the better fit.
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Brand | |
| SANY | L&T Komatsu |
| Type | |
| Large (25-50 Ton) | Large (25-50 Ton) |
| Price | |
| ₹ 1.75-1.78 Crore | Price Available Soon |
| Weight | |
| 49500 Kg | 45000 Kg |
| Bucket | |
| 3.1 m³ | 2.6 - 3.1 m³ |
| Max Digging Depth | |
| 6600 mm | 7040 mm |
| Engine | |
| Isuzu 403 HP | Komatsu 330 HP |
| Warranty | |
| 1 Yr. / 2500 hr. | 1 Yr. / 3000 hr. |
| Boom | |
| 6550 mm | 7060 mm |
| Quick Overview: | |
Sany SY500C-10HD large excavator expertise in heavy-duty construction and mining tasks ensuring reliability and durability. |
Komatsu PC450LC-7 is a large excavator that unites power with precision, made for tough mining and heavy-duty construction projects. |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Engine Make | Isuzu 6WG1X | Komatsu SAA6D125E-3 |
| Fuel Tank | 680 L | 650 L |
| Engine Displacment | 15.68 L | 11.04 L |
| Under Carriage | 5440 mm | 5355 mm |
| Hydraulic System | NA | NA |
| Arm | 2500 mm | 2400 mm |
| Max Digging Reach | 10850 mm | 11235 mm |
| Fuel Consumption | 15 L/hour | NA |
| Overall Width | 3360 mm | 3340 mm |
| Overall Length | 11700 mm | 11905 mm |
| Bucket Digging Force | 280 kN | 287 kN |
| Tailswing Radius | 3765 mm | 3645 mm |
| Track Shoe Width | 600 mm | 600 mm |
| AC Cabin | Standard | Standard |
| GPS | Standard | Standard |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Engine Make | |
| Isuzu 6WG1X | Komatsu SAA6D125E-3 |
| Fuel Tank | |
| 680 L | 650 L |
| Engine Displacment | |
| 15.68 L | 11.04 L |
| Under Carriage | |
| 5440 mm | 5355 mm |
| Hydraulic System | |
| NA | NA |
| Arm | |
| 2500 mm | 2400 mm |
| Max Digging Reach | |
| 10850 mm | 11235 mm |
| Fuel Consumption | |
| 15 L/hour | NA |
| Overall Width | |
| 3360 mm | 3340 mm |
| Overall Length | |
| 11700 mm | 11905 mm |
| Bucket Digging Force | |
| 280 kN | 287 kN |
| Tailswing Radius | |
| 3765 mm | 3645 mm |
| Track Shoe Width | |
| 600 mm | 600 mm |
| AC Cabin | |
| Standard | Standard |
| GPS | |
| Standard | Standard |
| 3682 | 3587 | |
| Model | Isuzu 403 HP | Komatsu 330 HP |
| Fuel | Diesel | Diesel |
| Type | 6 Cylinder , inline , Water Cooled | 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled |
| Rated Engine Power | 403 HP (300 kW) @ 1800 rpm | 330 HP (246 kW) @ 1850 rpm |
| Maximum Torque | 1950 Nm @ 1400 rpm | NA |
| Piston Displacement | 15.68 L | 11.04 L |
| Alternator | 70A | 24V / 50A |
| Battery | 2 x 12 V | 140 Ah , 2 x 12V |
| Starting Motor | 24 V - 7.5 kW | 24V - 11 kW |
| 24V - 11 kW | 24V - 11 kW | |
| No of Top rollers | 2 | 2 |
| No of bottom rollers | 9 | 8 |
| Track Shoes (Each Side) | 50 | 49 |
| Track Guard | NA | NA |
| Track Shoe width | 600 mm | 600 mm |
| Ground bearing pressure | 87.1 kPa | 79.5 kPa |
| Track Tensioning | Grease | Grease |
| Gradeability | 70 % (35°) | 70% (35 °) |
| Travel Speed-Low | 3.1 Km/h | 3.0 Km/h |
| Travel Speed-High | 5.4 Km/h | 5.5 Km/h |
| Max Tracking Force | 339 kN | 329 kN |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Hydraulic pump | 2 Variable Displacement Axial Piston Pumps | Variable displacement piston type. |
| Maximum Flow | 2 x 366 L/min | 690 L/min |
| Pilot Pump | Gear Pump | Gear Pump |
| Implement Circuit | 34.3 MPa | 37.3 MPa |
| Swing Circuit | 26.9 MPa | 27.9 MPa |
| Travel circuit | 31.4 MPa | 37.3 MPa |
| Pilot circuit | 3.9 MPa | 3.2 MPa |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Travel | 2 Axial Piston Motor With Parking Brake | 2 x axial piston motor with parking brake |
| Swing | Axial Piston Motor with Swing Holding Brake | 1 x axial piston motor with swing holding brake |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Fuel tank | 680 L | 650 L |
| Engine Coolant | 24 L | 34.2 L |
| Engine oil | 50 L | 38.0 L |
| Hydraulic system | NA | NA |
| Hydraulic tank | 480 L | 248 L |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Operating Weight | 49500 Kg | 45000 Kg |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Boom length | 6550 mm | 7060 mm |
| Arm length | 2500 mm | 2400 mm |
| Max Digging Reach | 10850 mm | 11235 mm |
| Max Digging Reach on ground | NA | 11015 mm |
| Max digging depth | 6600 mm | 7040 mm |
| Max digging height | 10120 mm | 10135 mm |
| Max Dump Height | 6700 mm | 6845 mm |
| Max vertical wallcut depth | NA | 3660 mm |
| Min swing radius | 5130 mm | 4890 mm |
| Max Height at Min Swing radius | 8800 mm | NA |
| Max height (above ground) | NA | NA |
| Dig depth (below ground) | NA | NA |
| Bucket Digging Force | 280 kN | 287 kN |
| Arm Digging Force | 248 kN | 327 kN |
| Swing Speed | 8.0 rpm | 9.0 rpm |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Dozer Type | NA | NA |
| Dozer Length | NA | NA |
| Digging depth for ground level | NA | NA |
| Approach Angle | NA | NA |
| Width | NA | NA |
| Height | NA | NA |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Bucket Capacity | 3.1 m³ | 2.6 - 3.1 m³ |
| Sany SY500C-10HD | Komatsu PC450LC-7 | |
| Overall Length | 11700 mm | 11905 mm |
| Overall width | 3360 mm | 3340 mm |
| Overall Height | 3980 mm | 3850 mm |
| Overall Height of Cab | 3470 mm | 2715 mm |
| Upper Width | 3290 mm | 2995 mm |
| Track Lengh on Ground | 4415 mm | 4350 mm |
| Undercarriage overall length | 5440 mm | 5355 mm |
| Tailswing radius | 3765 mm | 3645 mm |
| Min Ground clearance | 560 mm | 550 mm |
| Track gauge | 2740 mm | 2740 mm |
| Width over tracks | 3360 mm | 3340 mm |
| Track Height | NA | NA |
| Counterweight Clearance | NA | 1320 mm |
| Track Shoe Width | 600 mm | 600 mm |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Model | |
| Isuzu 403 HP | Komatsu 330 HP |
| Fuel | |
| Diesel | Diesel |
| Type | |
| 6 Cylinder , inline , Water Cooled | 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled |
| Rated Engine Power | |
| 403 HP (300 kW) @ 1800 rpm | 330 HP (246 kW) @ 1850 rpm |
| Maximum Torque | |
| 1950 Nm @ 1400 rpm | NA |
| Piston Displacement | |
| 15.68 L | 11.04 L |
| Alternator | |
| 70A | 24V / 50A |
| Battery | |
| 2 x 12 V | 140 Ah , 2 x 12V |
| Starting Motor | |
| 24 V - 7.5 kW | 24V - 11 kW |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| No of Top rollers | |
| 2 | 2 |
| No of bottom rollers | |
| 9 | 8 |
| Track Shoes (Each Side) | |
| 50 | 49 |
| Track Guard | |
| NA | NA |
| Track Shoe width | |
| 600 mm | 600 mm |
| Ground bearing pressure | |
| 87.1 kPa | 79.5 kPa |
| Track Tensioning | |
| Grease | Grease |
| Gradeability | |
| 70 % (35°) | 70% (35 °) |
| Travel Speed-Low | |
| 3.1 Km/h | 3.0 Km/h |
| Travel Speed-High | |
| 5.4 Km/h | 5.5 Km/h |
| Max Tracking Force | |
| 339 kN | 329 kN |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Hydraulic pump | |
| 2 Variable Displacement Axial Piston Pumps | Variable displacement piston type. |
| Maximum Flow | |
| 2 x 366 L/min | 690 L/min |
| Pilot Pump | |
| Gear Pump | Gear Pump |
| Implement Circuit | |
| 34.3 MPa | 37.3 MPa |
| Swing Circuit | |
| 26.9 MPa | 27.9 MPa |
| Travel circuit | |
| 31.4 MPa | 37.3 MPa |
| Pilot circuit | |
| 3.9 MPa | 3.2 MPa |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Fuel tank | |
| 680 L | 650 L |
| Engine Coolant | |
| 24 L | 34.2 L |
| Engine oil | |
| 50 L | 38.0 L |
| Hydraulic system | |
| NA | NA |
| Hydraulic tank | |
| 480 L | 248 L |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Operating Weight | |
| 49500 Kg | 45000 Kg |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Boom length | |
| 6550 mm | 7060 mm |
| Arm length | |
| 2500 mm | 2400 mm |
| Max Digging Reach | |
| 10850 mm | 11235 mm |
| Max Digging Reach on ground | |
| NA | 11015 mm |
| Max digging depth | |
| 6600 mm | 7040 mm |
| Max digging height | |
| 10120 mm | 10135 mm |
| Max Dump Height | |
| 6700 mm | 6845 mm |
| Max vertical wallcut depth | |
| NA | 3660 mm |
| Min swing radius | |
| 5130 mm | 4890 mm |
| Max Height at Min Swing radius | |
| 8800 mm | NA |
| Max height (above ground) | |
| NA | NA |
| Dig depth (below ground) | |
| NA | NA |
| Bucket Digging Force | |
| 280 kN | 287 kN |
| Arm Digging Force | |
| 248 kN | 327 kN |
| Swing Speed | |
| 8.0 rpm | 9.0 rpm |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Dozer Type | |
| NA | NA |
| Dozer Length | |
| NA | NA |
| Digging depth for ground level | |
| NA | NA |
| Approach Angle | |
| NA | NA |
| Width | |
| NA | NA |
| Height | |
| NA | NA |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Bucket Capacity | |
| 3.1 m³ | 2.6 - 3.1 m³ |
| Sany SY500C-10HD | Komatsu PC450LC-7 |
|---|---|
| Overall Length | |
| 11700 mm | 11905 mm |
| Overall width | |
| 3360 mm | 3340 mm |
| Overall Height | |
| 3980 mm | 3850 mm |
| Overall Height of Cab | |
| 3470 mm | 2715 mm |
| Upper Width | |
| 3290 mm | 2995 mm |
| Track Lengh on Ground | |
| 4415 mm | 4350 mm |
| Undercarriage overall length | |
| 5440 mm | 5355 mm |
| Tailswing radius | |
| 3765 mm | 3645 mm |
| Min Ground clearance | |
| 560 mm | 550 mm |
| Track gauge | |
| 2740 mm | 2740 mm |
| Width over tracks | |
| 3360 mm | 3340 mm |
| Track Height | |
| NA | NA |
| Counterweight Clearence | |
| NA | 1320 mm |
| Track Shoe Width | |
| 600 mm | 600 mm |
© 2025 Desi Machines All rights reserved.
Designed & Developed by PromotEdge
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
