Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    SANY SY500C-10HD VS Kobelco SK520XDLC Excavator

    SANY SY500C-10HD
    ₹1.40 - 1.50 crore*

    SANY SY500C-10HD

    • Weight

      49500 Kg

    • Bucket

      3.1 m³

    • Dig. Depth

      6600 mm

    • Engine

      Isuzu 403 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      6550 mm
    Large (25-50 Ton)
    Kobelco SK520XDLC
    ₹1.5 - 1.6 crore*

    Kobelco SK520XDLC

    • Weight

      50800 Kg

    • Bucket

      2.1 - 3.4 m³

    • Dig. Depth

      6820 mm

    • Engine

      HINO 344 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      6500 mm
    Large (25-50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights SANY SY500C-10HDKobelco SK520XDLC
    SANY SY500C-10HD VS Kobelco SK520XDLC Excavator
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SY500C-10HD

    ₹1.40 - 1.50 crore

    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco SK520XDLC

    ₹1.5 - 1.6 crore

    Particulars SANY SY500C-10HD Kobelco SK520XDLC

    Kobelco SK520XDLC vs Sany SY500C-10HD: Which One to Buy?

    These are 50-tonne class machines bought for one reason: to move a large amount of rock or earth every shift at the lowest cost per tonne. The tables below carry the full numbers. The Kobelco SK520XDLC digs deeper and swings faster, so it fills a truck in fewer, quicker passes. The Sany SY500C-10HD brings more engine power and a bigger bucket, so it takes more material in each pass.

    At this size the machine is only half the decision. Match the bucket to the trucks you already run: if three or four passes fill your tipper cleanly, you are working well, and a bigger bucket that spills or overloads costs you money. Then ask each dealer for a written service response time. A stopped 50-tonne machine can hold up a whole quarry, so support matters more than any single number. See the Kobelco excavator range and Sany excavator range, or read our excavator applications guide.

    Sany SY500C-10HD

    Pros:

    • High fuel tank capacity of 680 L
    • Powerful engine with rated power of 403 HP and peak torque of 1950 Nm
    • Large bucket capacity of 3.1 m³
    • Robust digging force of 280 kN for bucket and 248 kN for arm
    • Extended undercarriage length of 5440 mm for stability

    Cons:

    • Lower gradeability than Kobelco SK520XDLC
    • Slightly slower travel speed on low setting compared to Kobelco SK520XDLC
    • No provided ground bearing pressure details

    Kobelco SK520XDLC

    Pros:

    • Wide range of bucket capacity from 2.1 to 3.4 m³ allowing for flexibility in task
    • Superior max tracking force of 415 kN
    • Greater max digging depth (6820 mm) and height (11150 mm) capabilities
    • Higher swing speed of 7.6 rpm can improve cycle times
    • Slightly greater fuel efficiency supported by HINO engine model

    Cons:

    • Smaller fuel tank capacity compared to Sany SY500C-10HD at 638 L
    • Engine is less powerful than SY500C-10HD with a rated power of 344 HP
    • Increased engine coolant and oil capacities may indicate higher maintenance needs

    Pros:

    Cons:

    Closing Recommendation

    Both machines are built for heavy loading, so choose by your truck cycle and your depth of work. Choose the Kobelco SK520XDLC when you dig deep benches or foundations and want a faster swing that fills trucks in less time. Choose the Sany SY500C-10HD when you load from a face all day, want more engine power and a bigger bucket to take more in each pass, and have the trucks to keep up with it. So match the machine to your work: Kobelco SK520XDLC for deep digging and quick truck cycles, Sany SY500C-10HD for high-volume loading with large buckets.

    SANY SY500C-10HD Vs Kobelco SK520XDLC Excavator Price, Technical Specifications & Features

    Brand SANY Excavator Kobelco Excavator
    Type Large (25-50 Ton) Large (25-50 Ton)
    Operating Cost ₹1.40 - 1.50 crore ₹1.5 - 1.6 crore
    Price ₹1.40 - 1.50 crore ₹1.5 - 1.6 crore
    Weight 49500 Kg 50800 Kg
    Bucket 3.1 m³ 2.1 - 3.4 m³
    Max Digging Depth 6600 mm 6820 mm
    Engine Isuzu 403 HP HINO 344 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 6550 mm 6500 mm
    Quick Overview:

    The SANY SY500C-10HD is a heavy-duty 50-ton class mining excavator for large-scale earthmoving, quarry operations, and major infrastructure projects needing high output. Its Isuzu engine produces 403 HP, supporting continuous heavy-load operations with stable fuel consumption during long cycles. With an operating weight of about 49,500 kg, it provides excellent ground stability during tough tasks. Compared to smaller excavators, the SY500C-10HD from SANY Construction Equipment offers much higher bucket capacity and stronger digging force for faster material handling. It reaches a digging depth of around 6,600 mm, making it appropriate for deep excavation and bulk material tasks. A 3.1 m³ bucket boosts productivity per cycle, especially in mining and large excavation projects. Advanced hydraulic systems ensure smooth control during multi-function tasks under load. Reinforced structural components improve durability in harsh conditions. High output per shift helps contractors enhance efficiency and lower costs per tonne moved. The SANY SY500C-10HD excavator price in India ranges from Rs. 1.40 to 1.50 crore. This SANY excavator is suitable for mining contractors and major infrastructure companies dealing with high-volume and heavy-duty excavation projects.

    The Kobelco SK520XDLC is a 50-ton class hydraulic excavator designed for exceptional performance and high productivity in mining and quarry environments. It has a HINO P11C-WF 6-cylinder, water-cooled, turbocharged diesel engine that delivers 344 HP at 1,850 rpm, ensuring strong, consistent output with good fuel efficiency. With an operating weight of 50,800 to 51,100 kg, it offers excellent stability for large-scale excavation tasks. Its bucket capacity of 2.1 to 3.4 m³ makes it very efficient for handling bulk materials in challenging mining operations. This excavator from Kobelco Construction Equipment can dig to depths of around 3,550 to 3,650 mm, providing powerful performance in hard rock and compact ground conditions. The digging forces exceed 300 kN with a power boost, maximizing excavation capability in difficult situations. The XD reinforced boom, stronger arm, heavy-duty undercarriage, and large track guides allow it to withstand tough environments and extend the machine’s life significantly. ECO mode and an arm regeneration system help reduce operating costs during extended mining hours. The spacious, airtight cabin features low vibration, great visibility, and advanced controls for operator comfort and safety. The Kobelco 520 excavator price in India ranges from Rs. 1.5 to 1.6 crore and a reliable choice for large mining contractors and quarry operators dealing with bulk excavation and heavy material movement.
    Agency review

    Planning to buy the SANY SY500C-10HD Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Kobelco SK520XDLC Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Kobelco SK520XDLC vs Sany SY500C-10HD: Which One to Buy?

    These are 50-tonne class machines bought for one reason: to move a large amount of rock or earth every shift at the lowest cost per tonne. The tables below carry the full numbers. The Kobelco SK520XDLC digs deeper and swings faster, so it fills a truck in fewer, quicker passes. The Sany SY500C-10HD brings more engine power and a bigger bucket, so it takes more material in each pass.

    At this size the machine is only half the decision. Match the bucket to the trucks you already run: if three or four passes fill your tipper cleanly, you are working well, and a bigger bucket that spills or overloads costs you money. Then ask each dealer for a written service response time. A stopped 50-tonne machine can hold up a whole quarry, so support matters more than any single number. See the Kobelco excavator range and Sany excavator range, or read our excavator applications guide.

    Sany SY500C-10HD

    Pros:

    • High fuel tank capacity of 680 L
    • Powerful engine with rated power of 403 HP and peak torque of 1950 Nm
    • Large bucket capacity of 3.1 m³
    • Robust digging force of 280 kN for bucket and 248 kN for arm
    • Extended undercarriage length of 5440 mm for stability

    Cons:

    • Lower gradeability than Kobelco SK520XDLC
    • Slightly slower travel speed on low setting compared to Kobelco SK520XDLC
    • No provided ground bearing pressure details

    Kobelco SK520XDLC

    Pros:

    • Wide range of bucket capacity from 2.1 to 3.4 m³ allowing for flexibility in task
    • Superior max tracking force of 415 kN
    • Greater max digging depth (6820 mm) and height (11150 mm) capabilities
    • Higher swing speed of 7.6 rpm can improve cycle times
    • Slightly greater fuel efficiency supported by HINO engine model

    Cons:

    • Smaller fuel tank capacity compared to Sany SY500C-10HD at 638 L
    • Engine is less powerful than SY500C-10HD with a rated power of 344 HP
    • Increased engine coolant and oil capacities may indicate higher maintenance needs

    Pros:

    Cons:

    Closing Recommendation

    Both machines are built for heavy loading, so choose by your truck cycle and your depth of work. Choose the Kobelco SK520XDLC when you dig deep benches or foundations and want a faster swing that fills trucks in less time. Choose the Sany SY500C-10HD when you load from a face all day, want more engine power and a bigger bucket to take more in each pass, and have the trucks to keep up with it. So match the machine to your work: Kobelco SK520XDLC for deep digging and quick truck cycles, Sany SY500C-10HD for high-volume loading with large buckets.

    SANY SY500C-10HD Vs Kobelco SK520XDLC Excavator Price, Technical Specifications & Features

    SANY SY500C-10HD Kobelco SK520XDLC
    Brand
    SANY Excavator Kobelco Excavator
    Type
    Large (25-50 Ton) Large (25-50 Ton)
    Price
    ₹1.40 - 1.50 crore ₹1.5 - 1.6 crore
    Weight
    49500 Kg 50800 Kg
    Bucket
    3.1 m³ 2.1 - 3.4 m³
    Max Digging Depth
    6600 mm 6820 mm
    Engine
    Isuzu 403 HP HINO 344 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    6550 mm 6500 mm
    Quick Overview:

    The SANY SY500C-10HD is a heavy-duty 50-ton class mining excavator for large-scale earthmoving, quarry operations, and major infrastructure projects needing high output. Its Isuzu engine produces 403 HP, supporting continuous heavy-load operations with stable fuel consumption during long cycles. With an operating weight of about 49,500 kg, it provides excellent ground stability during tough tasks. Compared to smaller excavators, the SY500C-10HD from SANY Construction Equipment offers much higher bucket capacity and stronger digging force for faster material handling. It reaches a digging depth of around 6,600 mm, making it appropriate for deep excavation and bulk material tasks. A 3.1 m³ bucket boosts productivity per cycle, especially in mining and large excavation projects. Advanced hydraulic systems ensure smooth control during multi-function tasks under load. Reinforced structural components improve durability in harsh conditions. High output per shift helps contractors enhance efficiency and lower costs per tonne moved. The SANY SY500C-10HD excavator price in India ranges from Rs. 1.40 to 1.50 crore. This SANY excavator is suitable for mining contractors and major infrastructure companies dealing with high-volume and heavy-duty excavation projects.

    The Kobelco SK520XDLC is a 50-ton class hydraulic excavator designed for exceptional performance and high productivity in mining and quarry environments. It has a HINO P11C-WF 6-cylinder, water-cooled, turbocharged diesel engine that delivers 344 HP at 1,850 rpm, ensuring strong, consistent output with good fuel efficiency. With an operating weight of 50,800 to 51,100 kg, it offers excellent stability for large-scale excavation tasks. Its bucket capacity of 2.1 to 3.4 m³ makes it very efficient for handling bulk materials in challenging mining operations. This excavator from Kobelco Construction Equipment can dig to depths of around 3,550 to 3,650 mm, providing powerful performance in hard rock and compact ground conditions. The digging forces exceed 300 kN with a power boost, maximizing excavation capability in difficult situations. The XD reinforced boom, stronger arm, heavy-duty undercarriage, and large track guides allow it to withstand tough environments and extend the machine’s life significantly. ECO mode and an arm regeneration system help reduce operating costs during extended mining hours. The spacious, airtight cabin features low vibration, great visibility, and advanced controls for operator comfort and safety. The Kobelco 520 excavator price in India ranges from Rs. 1.5 to 1.6 crore and a reliable choice for large mining contractors and quarry operators dealing with bulk excavation and heavy material movement.

    SANY SY500C-10HD Vs Kobelco SK520XDLC Excavator Key Highlights

    SANY SY500C-10HD Kobelco SK520XDLC
    Engine Make Isuzu 6WG1X HINO P11C-WF
    Fuel Tank 680 L 638 L
    Engine Displacment 15.68 L 10.52 L
    Under Carriage 5440 mm 5460 mm
    Hydraulic System NA 631 L
    Arm 2500 mm 2600 mm
    Max Digging Reach 10850 mm 11250 mm
    Fuel Consumption 15 L/hour NA
    Overall Width 3360 mm 3350 mm
    Overall Length 11700 mm 11980 mm
    Bucket Digging Force 280 kN 282 kN
    Tailswing Radius 3765 mm 3800 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    SANY SY500C-10HD Vs Kobelco SK520XDLC Excavator Key Highlights

    SANY SY500C-10HD Kobelco SK520XDLC
    Engine Make
    Isuzu 6WG1X HINO P11C-WF
    Fuel Tank
    680 L 638 L
    Engine Displacment
    15.68 L 10.52 L
    Under Carriage
    5440 mm 5460 mm
    Hydraulic System
    NA 631 L
    Arm
    2500 mm 2600 mm
    Max Digging Reach
    10850 mm 11250 mm
    Fuel Consumption
    15 L/hour NA
    Overall Width
    3360 mm 3350 mm
    Overall Length
    11700 mm 11980 mm
    Bucket Digging Force
    280 kN 282 kN
    Tailswing Radius
    3765 mm 3800 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    SANY SY500C-10HD Vs Kobelco SK520XDLC Excavator Specifications

    Engine

    3682 3564
    Model Isuzu 403 HP HINO 344 HP
    Fuel Diesel Diesel
    Type 6 Cylinder , inline , Water Cooled 4cycle 6cylinder direct injection type diesel engine with intercooler turbo-charger , water-cooled
    Rated Engine Power 403 HP (300 kW) @ 1800 rpm 344 HP (257 kW) @ 1850 rpm
    Maximum Torque 1950 Nm @ 1400 rpm 1470 N.m @1400 rpm
    Piston Displacement 15.68 L 10.52 L
    Alternator 70A 60A
    Battery 2 x 12 V 104 Ah , 2 x 12V
    Starting Motor 24 V - 7.5 kW 24V - 6kW

    Undercarriage

    24V - 6kW 24V - 6kW
    No of Top rollers 2 NA
    No of bottom rollers 9 NA
    Track Shoes (Each Side) 50 50
    Track Guard NA NA
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure 87.1 kPa 88 kPa
    Track Tensioning Grease Grease
    Gradeability 70 % (35°) 70% (35 °)
    Travel Speed-Low 3.1 Km/h 3.4 Km/h
    Travel Speed-High 5.4 Km/h 5.4 Km/h
    Max Tracking Force 339 kN 415 kN

    Hydraulic System

    SANY SY500C-10HD Kobelco SK520XDLC
    Hydraulic pump 2 Variable Displacement Axial Piston Pumps Two variable displacement piston pumps
    Maximum Flow 2 x 366 L/min 2 x 370 L/min
    Pilot Pump Gear Pump 1 Gear Pump
    Implement Circuit 34.3 MPa 31.4 MPa
    Swing Circuit 26.9 MPa 26.0 MPa
    Travel circuit 31.4 MPa 34.3 MPa
    Pilot circuit 3.9 MPa 5.0 MPa

    Hydraulic Motors

    SANY SY500C-10HD Kobelco SK520XDLC
    Travel 2 Axial Piston Motor With Parking Brake Variable displacement piston pump
    Swing Axial Piston Motor with Swing Holding Brake Axial-piston mortor

    Service Capacities

    SANY SY500C-10HD Kobelco SK520XDLC
    Fuel tank 680 L 638 L
    Engine Coolant 24 L 47.4 L
    Engine oil 50 L 42.5 L
    Hydraulic system NA 631 L
    Hydraulic tank 480 L 371 L

    Machine Weight

    SANY SY500C-10HD Kobelco SK520XDLC
    Operating Weight 49500 Kg 50800 Kg

    Working Range

    SANY SY500C-10HD Kobelco SK520XDLC
    Boom length 6550 mm 6500 mm
    Arm length 2500 mm 2600 mm
    Max Digging Reach 10850 mm 11250 mm
    Max Digging Reach on ground NA 11010 mm
    Max digging depth 6600 mm 6820 mm
    Max digging height 10120 mm 11150 mm
    Max Dump Height 6700 mm 7180 mm
    Max vertical wallcut depth NA 6110 mm
    Min swing radius 5130 mm 4960 mm
    Max Height at Min Swing radius 8800 mm NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 280 kN 282 kN
    Arm Digging Force 248 kN 239 kN
    Swing Speed 8.0 rpm 7.6 rpm

    Dozer Blade

    SANY SY500C-10HD Kobelco SK520XDLC
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    SANY SY500C-10HD Kobelco SK520XDLC
    Bucket Capacity 3.1 m³ 2.1 - 3.4 m³

    Static Dimensions

    SANY SY500C-10HD Kobelco SK520XDLC
    Overall Length 11700 mm 11980 mm
    Overall width 3360 mm 3350 mm
    Overall Height 3980 mm 4330 mm
    Overall Height of Cab 3470 mm 3320 mm
    Upper Width 3290 mm 2980 mm
    Track Lengh on Ground 4415 mm 4400 mm
    Undercarriage overall length 5440 mm 5460 mm
    Tailswing radius 3765 mm 3800 mm
    Min Ground clearance 560 mm 510 mm
    Track gauge 2740 mm 2750 mm
    Width over tracks 3360 mm NA
    Track Height NA NA
    Counterweight Clearance NA 1260 mm
    Track Shoe Width 600 mm 600 mm

    SANY SY500C-10HD Vs Kobelco SK520XDLC Excavator Specifications

    Engine

    SANY SY500C-10HD Kobelco SK520XDLC
    Model
    Isuzu 403 HP HINO 344 HP
    Fuel
    Diesel Diesel
    Type
    6 Cylinder , inline , Water Cooled 4cycle 6cylinder direct injection type diesel engine with intercooler turbo-charger , water-cooled
    Rated Engine Power
    403 HP (300 kW) @ 1800 rpm 344 HP (257 kW) @ 1850 rpm
    Maximum Torque
    1950 Nm @ 1400 rpm 1470 N.m @1400 rpm
    Piston Displacement
    15.68 L 10.52 L
    Alternator
    70A 60A
    Battery
    2 x 12 V 104 Ah , 2 x 12V
    Starting Motor
    24 V - 7.5 kW 24V - 6kW

    Undercarriage

    SANY SY500C-10HD Kobelco SK520XDLC
    No of Top rollers
    2 NA
    No of bottom rollers
    9 NA
    Track Shoes (Each Side)
    50 50
    Track Guard
    NA NA
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    87.1 kPa 88 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    70 % (35°) 70% (35 °)
    Travel Speed-Low
    3.1 Km/h 3.4 Km/h
    Travel Speed-High
    5.4 Km/h 5.4 Km/h
    Max Tracking Force
    339 kN 415 kN

    Hydraulic Motors

    SANY SY500C-10HD Kobelco SK520XDLC
    Hydraulic pump
    2 Variable Displacement Axial Piston Pumps Two variable displacement piston pumps
    Maximum Flow
    2 x 366 L/min 2 x 370 L/min
    Pilot Pump
    Gear Pump 1 Gear Pump
    Implement Circuit
    34.3 MPa 31.4 MPa
    Swing Circuit
    26.9 MPa 26.0 MPa
    Travel circuit
    31.4 MPa 34.3 MPa
    Pilot circuit
    3.9 MPa 5.0 MPa

    Service Capacities

    SANY SY500C-10HD Kobelco SK520XDLC
    Fuel tank
    680 L 638 L
    Engine Coolant
    24 L 47.4 L
    Engine oil
    50 L 42.5 L
    Hydraulic system
    NA 631 L
    Hydraulic tank
    480 L 371 L

    Machine Weight

    SANY SY500C-10HD Kobelco SK520XDLC
    Operating Weight
    49500 Kg 50800 Kg

    Working Range

    SANY SY500C-10HD Kobelco SK520XDLC
    Boom length
    6550 mm 6500 mm
    Arm length
    2500 mm 2600 mm
    Max Digging Reach
    10850 mm 11250 mm
    Max Digging Reach on ground
    NA 11010 mm
    Max digging depth
    6600 mm 6820 mm
    Max digging height
    10120 mm 11150 mm
    Max Dump Height
    6700 mm 7180 mm
    Max vertical wallcut depth
    NA 6110 mm
    Min swing radius
    5130 mm 4960 mm
    Max Height at Min Swing radius
    8800 mm NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    280 kN 282 kN
    Arm Digging Force
    248 kN 239 kN
    Swing Speed
    8.0 rpm 7.6 rpm

    Dozer Blade

    SANY SY500C-10HD Kobelco SK520XDLC
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    SANY SY500C-10HD Kobelco SK520XDLC
    Bucket Capacity
    3.1 m³ 2.1 - 3.4 m³

    Static Dimensions

    SANY SY500C-10HD Kobelco SK520XDLC
    Overall Length
    11700 mm 11980 mm
    Overall width
    3360 mm 3350 mm
    Overall Height
    3980 mm 4330 mm
    Overall Height of Cab
    3470 mm 3320 mm
    Upper Width
    3290 mm 2980 mm
    Track Lengh on Ground
    4415 mm 4400 mm
    Undercarriage overall length
    5440 mm 5460 mm
    Tailswing radius
    3765 mm 3800 mm
    Min Ground clearance
    560 mm 510 mm
    Track gauge
    2740 mm 2750 mm
    Width over tracks
    3360 mm NA
    Track Height
    NA NA
    Counterweight Clearence
    NA 1260 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with SANY SY500C-10HD

    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    CAT Excavator 350 Price in India
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Liebherr R 945 Litronic Excavator | Desi Machines
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Volvo EC480D Excavator Price, Specs & Features in India
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Tata Hitachi ZAXIS 490H Ultra mining excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Tata Hitachi ZAXIS 470H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Komatsu PC450LC-7 Large (25-50 Ton)
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Liugong 950E Large (25-50 Ton)
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Hyundai 520 Excavator
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    CAT 345 Excavator
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg
    Compare

    Popular Comparisons with Kobelco SK520XDLC

    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    CAT Excavator 350 Price in India
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Liebherr R 945 Litronic Excavator | Desi Machines
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Volvo EC480D Excavator Price, Specs & Features in India
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Tata Hitachi ZAXIS 490H Ultra mining excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Tata Hitachi ZAXIS 470H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Komatsu PC450LC-7 Large (25-50 Ton)
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Liugong 950E Large (25-50 Ton)
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Hyundai 520 Excavator
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Compare
    VS
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    CAT 345 Excavator
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg
    Compare

    Frequently Asked Question

    Ans.

    The Kobelco SK520XDLC usually loads faster because it swings quicker between the pit and the truck. The Sany SY500C-10HD carries more in each bucket, so it needs fewer passes. The real answer depends on your truck size, so count passes on a trial before you decide.

    Ans.

    The Kobelco SK520XDLC digs deeper. That matters in quarry benches and deep foundation work where you want to reach the bottom without cutting a ramp. If your work is mostly loading from a face at ground level, the extra depth will not change your daily output.

    Ans.

    Aim to fill your tipper in three or four clean passes. Fewer passes with a very big bucket often means spillage and overloaded trucks, and more passes wastes shift time. Tell the dealer your tipper capacity and ask him to suggest the bucket size, then check it on a trial load.

    Ans.

    Undercarriage and fuel take the largest share. Tracks, rollers and idlers wear fast on sharp rock, and a 50-tonne machine burns a lot of diesel every shift. Ask each dealer for the expected undercarriage life on your kind of ground and the cost of a full set before you compare the two machines.

    Ans.

    It depends on your location, so check it site by site. Sany has grown a wide dealer network across Indian project areas, and Kobelco has long experience with heavy machines in mining. Ask both for the distance to the nearest service base and a written response time, and put that in the deal.

    Ans.

    Yes, a 50-tonne machine needs an experienced driver. Loading a truck safely at this size, working on a bench and keeping the machine level takes skill that a small-machine driver does not have. Ask the dealer to include training days for your driver as part of the purchase.

    SANY SY500C-10HD Vs Kobelco SK520XDLC - Compare Price & Availability Across 600+ Locations in India

    Compare SANY SY500C-10HD Vs Kobelco SK520XDLC price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare