Contact Us



    Chat with us

    SANY SY500C-10HD VS Hyundai HX520L Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights SANY SY500C-10HDHyundai HX520L
    SANY SY500C-10HD VS Hyundai HX520L Excavator
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SY500C-10HD

    ₹1.40 - 1.50 crore

    Hyundai 520 Excavator
    Hyundai HX520L

    ₹1.60 - 1.85 crore

    Particulars SANY SY500C-10HD Hyundai HX520L

    Hyundai HX520L vs SANY SY500C-10HD: Which One to Buy?

    If you want a fuel-efficient large excavator with standard GPS and AC, pick the Hyundai HX520L; if you want the stronger engine and a longer warranty, the SANY SY500C-10HD is built for that. The Hyundai runs a 335 HP Cummins engine, has a strong 279.5 kN bucket digging force, and its fuel use is rated at 30 litres an hour, which keeps running costs down on a big machine. The SANY has a bigger 403 HP engine, a strong 248 kN arm digging force, and a longer 2500-hour warranty, backed by a bigger 680-litre fuel tank for long shifts.

    If keeping fuel and running costs low matters most for your large excavation work, the Hyundai HX520L is the steadier choice. If you need more raw power and longer warranty cover for heavy-duty jobs, the SANY SY500C-10HD is worth the extra running cost. See the full Hyundai excavator range, the SANY excavator range, browse all excavators, or read our excavator guide to compare more large excavators.

    Hyundai HX520L

    Pros:

    • High bucket digging force of 279.5 kN
    • Equipped with a powerful Cummins engine with 335 HP
    • Standard AC cabin and GPS for comfort and convenience
    • Lower fuel consumption at 30 L/hour
    • Longer undercarriage providing stability

    Cons:

    • Price information not provided
    • Slightly lower engine power compared to Sany SY500C-10HD

    Sany SY500C-10HD

    Pros:

    • Higher engine power with 403 HP
    • Greater arm digging force of 248 kN
    • Price is specified, providing clear cost expectations
    • Longer warranty coverage of 2500 hours
    • Higher fuel tank capacity at 680 L

    Cons:

    • Higher ground bearing pressure at 87.1 kPa
    • More expensive operating costs with a higher price point

    Pros:

    Cons:

    Closing Recommendation

    Both are large excavators built for heavy digging and loading work. Choose the Hyundai HX520L when you want lower fuel use and steady running costs on a big machine. Choose the SANY SY500C-10HD when you need more raw engine power and a longer warranty for tough, heavy-duty jobs. So match the machine to your work: Hyundai HX520L for lower running costs, SANY SY500C-10HD for more power and longer warranty cover.

    SANY SY500C-10HD Vs Hyundai HX520L Excavator Price, Technical Specifications & Features

    Brand SANY Excavator Hyundai Excavator
    Type Large (25-50 Ton) Large (25-50 Ton)
    Operating Cost ₹1.40 - 1.50 crore ₹1.60 - 1.85 crore
    Price ₹1.40 - 1.50 crore ₹1.60 - 1.85 crore
    Weight 49500 Kg 50200 Kg
    Bucket 3.1 m³ 2.43 - 3.2 m³
    Max Digging Depth 6600 mm 6380 mm
    Engine Isuzu 403 HP Cummins 335 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 6550 mm 6550 mm
    Quick Overview:

    The SANY SY500C-10HD is a heavy-duty 50-ton class mining excavator for large-scale earthmoving, quarry operations, and major infrastructure projects needing high output. Its Isuzu engine produces 403 HP, supporting continuous heavy-load operations with stable fuel consumption during long cycles. With an operating weight of about 49,500 kg, it provides excellent ground stability during tough tasks. Compared to smaller excavators, the SY500C-10HD from SANY Construction Equipment offers much higher bucket capacity and stronger digging force for faster material handling. It reaches a digging depth of around 6,600 mm, making it appropriate for deep excavation and bulk material tasks. A 3.1 m³ bucket boosts productivity per cycle, especially in mining and large excavation projects. Advanced hydraulic systems ensure smooth control during multi-function tasks under load. Reinforced structural components improve durability in harsh conditions. High output per shift helps contractors enhance efficiency and lower costs per tonne moved. The SANY SY500C-10HD excavator price in India ranges from Rs. 1.40 to 1.50 crore. This SANY excavator is suitable for mining contractors and major infrastructure companies dealing with high-volume and heavy-duty excavation projects.

    The Hyundai HX520L is a 50-ton heavy-duty crawler excavator designed for large-scale coal, iron ore, and limestone mining operations that require maximum daily extraction in India. Its Cummins X12 engine produces about 335 HP at 2,100 rpm, providing excellent torque and fuel-efficient power during sustained high-demand extraction cycles. The machine weighs approximately 50,200 kg with a 3.2 m³ bucket, which is the largest capacity in its class for the Indian market. Its maximum digging of 6.3 m depth allows for productive work on deep mining faces, thick seam extraction, and large open-cut projects. Intelligent power control and variable modes keep the HX520L from Hyundai Construction Equipment, fuel-efficient during partial-load and peak extraction phases. A rugged undercarriage and strong structural components can handle the stress of continuous large-scale mining without fatigue. The Hi-MATE remote management system allows for GPS tracking, real-time fault alerts, and usage reporting from any location. An advanced cooling system and easily accessible service points reduce downtime in high-production conditions. An 8-inch touchscreen, roomy air-conditioned cabin, and ergonomic controls help operators stay focused during long multi-shift schedules. High daily extraction volumes, smart fleet monitoring, and low fuel consumption per tonne improve profitability on mine sites. The Hyundai HX520L excavator price in India ranges from Rs. 1.60 crore to 1.85 crore. This Hyundai excavator is the top choice for large mining companies, coal and iron ore contractors, and heavy extraction operations.

    Agency review

    Planning to buy the SANY SY500C-10HD Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Hyundai HX520L Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Hyundai HX520L vs SANY SY500C-10HD: Which One to Buy?

    If you want a fuel-efficient large excavator with standard GPS and AC, pick the Hyundai HX520L; if you want the stronger engine and a longer warranty, the SANY SY500C-10HD is built for that. The Hyundai runs a 335 HP Cummins engine, has a strong 279.5 kN bucket digging force, and its fuel use is rated at 30 litres an hour, which keeps running costs down on a big machine. The SANY has a bigger 403 HP engine, a strong 248 kN arm digging force, and a longer 2500-hour warranty, backed by a bigger 680-litre fuel tank for long shifts.

    If keeping fuel and running costs low matters most for your large excavation work, the Hyundai HX520L is the steadier choice. If you need more raw power and longer warranty cover for heavy-duty jobs, the SANY SY500C-10HD is worth the extra running cost. See the full Hyundai excavator range, the SANY excavator range, browse all excavators, or read our excavator guide to compare more large excavators.

    Hyundai HX520L

    Pros:

    • High bucket digging force of 279.5 kN
    • Equipped with a powerful Cummins engine with 335 HP
    • Standard AC cabin and GPS for comfort and convenience
    • Lower fuel consumption at 30 L/hour
    • Longer undercarriage providing stability

    Cons:

    • Price information not provided
    • Slightly lower engine power compared to Sany SY500C-10HD

    Sany SY500C-10HD

    Pros:

    • Higher engine power with 403 HP
    • Greater arm digging force of 248 kN
    • Price is specified, providing clear cost expectations
    • Longer warranty coverage of 2500 hours
    • Higher fuel tank capacity at 680 L

    Cons:

    • Higher ground bearing pressure at 87.1 kPa
    • More expensive operating costs with a higher price point

    Pros:

    Cons:

    Closing Recommendation

    Both are large excavators built for heavy digging and loading work. Choose the Hyundai HX520L when you want lower fuel use and steady running costs on a big machine. Choose the SANY SY500C-10HD when you need more raw engine power and a longer warranty for tough, heavy-duty jobs. So match the machine to your work: Hyundai HX520L for lower running costs, SANY SY500C-10HD for more power and longer warranty cover.

    SANY SY500C-10HD Vs Hyundai HX520L Excavator Price, Technical Specifications & Features

    SANY SY500C-10HD Hyundai HX520L
    Brand
    SANY Excavator Hyundai Excavator
    Type
    Large (25-50 Ton) Large (25-50 Ton)
    Price
    ₹1.40 - 1.50 crore ₹1.60 - 1.85 crore
    Weight
    49500 Kg 50200 Kg
    Bucket
    3.1 m³ 2.43 - 3.2 m³
    Max Digging Depth
    6600 mm 6380 mm
    Engine
    Isuzu 403 HP Cummins 335 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    6550 mm 6550 mm
    Quick Overview:

    The SANY SY500C-10HD is a heavy-duty 50-ton class mining excavator for large-scale earthmoving, quarry operations, and major infrastructure projects needing high output. Its Isuzu engine produces 403 HP, supporting continuous heavy-load operations with stable fuel consumption during long cycles. With an operating weight of about 49,500 kg, it provides excellent ground stability during tough tasks. Compared to smaller excavators, the SY500C-10HD from SANY Construction Equipment offers much higher bucket capacity and stronger digging force for faster material handling. It reaches a digging depth of around 6,600 mm, making it appropriate for deep excavation and bulk material tasks. A 3.1 m³ bucket boosts productivity per cycle, especially in mining and large excavation projects. Advanced hydraulic systems ensure smooth control during multi-function tasks under load. Reinforced structural components improve durability in harsh conditions. High output per shift helps contractors enhance efficiency and lower costs per tonne moved. The SANY SY500C-10HD excavator price in India ranges from Rs. 1.40 to 1.50 crore. This SANY excavator is suitable for mining contractors and major infrastructure companies dealing with high-volume and heavy-duty excavation projects.

    The Hyundai HX520L is a 50-ton heavy-duty crawler excavator designed for large-scale coal, iron ore, and limestone mining operations that require maximum daily extraction in India. Its Cummins X12 engine produces about 335 HP at 2,100 rpm, providing excellent torque and fuel-efficient power during sustained high-demand extraction cycles. The machine weighs approximately 50,200 kg with a 3.2 m³ bucket, which is the largest capacity in its class for the Indian market. Its maximum digging of 6.3 m depth allows for productive work on deep mining faces, thick seam extraction, and large open-cut projects. Intelligent power control and variable modes keep the HX520L from Hyundai Construction Equipment, fuel-efficient during partial-load and peak extraction phases. A rugged undercarriage and strong structural components can handle the stress of continuous large-scale mining without fatigue. The Hi-MATE remote management system allows for GPS tracking, real-time fault alerts, and usage reporting from any location. An advanced cooling system and easily accessible service points reduce downtime in high-production conditions. An 8-inch touchscreen, roomy air-conditioned cabin, and ergonomic controls help operators stay focused during long multi-shift schedules. High daily extraction volumes, smart fleet monitoring, and low fuel consumption per tonne improve profitability on mine sites. The Hyundai HX520L excavator price in India ranges from Rs. 1.60 crore to 1.85 crore. This Hyundai excavator is the top choice for large mining companies, coal and iron ore contractors, and heavy extraction operations.

    SANY SY500C-10HD Vs Hyundai HX520L Excavator Key Highlights

    SANY SY500C-10HD Hyundai HX520L
    Engine Make Isuzu 6WG1X Cummins - X12
    Fuel Tank 680 L 660 L
    Engine Displacment 15.68 L 11.8 L
    Under Carriage 5440 mm 5490 mm
    Hydraulic System NA 499 L
    Arm 2500 mm 2550 mm
    Max Digging Reach 10850 mm 10870 mm
    Fuel Consumption 15 L/hour 30 L/hour
    Overall Width 3360 mm 3340 mm
    Overall Length 11700 mm 11680 mm
    Bucket Digging Force 280 kN 279.5 kN
    Tailswing Radius 3765 mm 3800 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    SANY SY500C-10HD Vs Hyundai HX520L Excavator Key Highlights

    SANY SY500C-10HD Hyundai HX520L
    Engine Make
    Isuzu 6WG1X Cummins - X12
    Fuel Tank
    680 L 660 L
    Engine Displacment
    15.68 L 11.8 L
    Under Carriage
    5440 mm 5490 mm
    Hydraulic System
    NA 499 L
    Arm
    2500 mm 2550 mm
    Max Digging Reach
    10850 mm 10870 mm
    Fuel Consumption
    15 L/hour 30 L/hour
    Overall Width
    3360 mm 3340 mm
    Overall Length
    11700 mm 11680 mm
    Bucket Digging Force
    280 kN 279.5 kN
    Tailswing Radius
    3765 mm 3800 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    SANY SY500C-10HD Vs Hyundai HX520L Excavator Specifications

    Engine

    3682 3536
    Model Isuzu 403 HP Cummins 335 HP
    Fuel Diesel Diesel
    Type 6 Cylinder , inline , Water Cooled 4 Cycle , 6 Cylinder , Charge Air Cooled , direct injection , Electrical Control Diesel Engine , Turboharged , Water Cooled
    Rated Engine Power 403 HP (300 kW) @ 1800 rpm 335 HP (250 kW) @ 2100 rpm
    Maximum Torque 1950 Nm @ 1400 rpm 1674 N.m @1400 rpm
    Piston Displacement 15.68 L 11.8 L
    Alternator 70A NA
    Battery 2 x 12 V 2 x 12V , 200 Ah
    Starting Motor 24 V - 7.5 kW NA

    Undercarriage

    NA NA
    No of Top rollers 2 2
    No of bottom rollers 9 9
    Track Shoes (Each Side) 50 53
    Track Guard NA 2
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure 87.1 kPa 85.3 kPa
    Track Tensioning Grease Grease
    Gradeability 70 % (35°) 35 ° / 70%
    Travel Speed-Low 3.1 Km/h 3.4 Km/h
    Travel Speed-High 5.4 Km/h 5.5 Km/h
    Max Tracking Force 339 kN 389 kN

    Hydraulic System

    SANY SY500C-10HD Hyundai HX520L
    Hydraulic pump 2 Variable Displacement Axial Piston Pumps Variable Displacement Axis Piston Pumps
    Maximum Flow 2 x 366 L/min 2 x 405 L/min
    Pilot Pump Gear Pump Gear Pump
    Implement Circuit 34.3 MPa 32.3 MPa
    Swing Circuit 26.9 MPa 27.9 MPa
    Travel circuit 31.4 MPa 35.3 MPa
    Pilot circuit 3.9 MPa 3.9 MPa

    Hydraulic Motors

    SANY SY500C-10HD Hyundai HX520L
    Travel 2 Axial Piston Motor With Parking Brake Two speed axial pistons motor with brake valve & parking brake
    Swing Axial Piston Motor with Swing Holding Brake Axial piston motor with automatic brake

    Service Capacities

    SANY SY500C-10HD Hyundai HX520L
    Fuel tank 680 L 660 L
    Engine Coolant 24 L 43 L
    Engine oil 50 L 34 L
    Hydraulic system NA 499 L
    Hydraulic tank 480 L 275 L

    Machine Weight

    SANY SY500C-10HD Hyundai HX520L
    Operating Weight 49500 Kg 50200 Kg

    Working Range

    SANY SY500C-10HD Hyundai HX520L
    Boom length 6550 mm 6550 mm
    Arm length 2500 mm 2550 mm
    Max Digging Reach 10850 mm 10870 mm
    Max Digging Reach on ground NA 10610 mm
    Max digging depth 6600 mm 6380 mm
    Max digging height 10120 mm 10760 mm
    Max Dump Height 6700 mm 7290 mm
    Max vertical wallcut depth NA 4760 mm
    Min swing radius 5130 mm 4440 mm
    Max Height at Min Swing radius 8800 mm NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 280 kN 279.5 kN
    Arm Digging Force 248 kN 246.2 kN
    Swing Speed 8.0 rpm 8.8 rpm

    Dozer Blade

    SANY SY500C-10HD Hyundai HX520L
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    SANY SY500C-10HD Hyundai HX520L
    Bucket Capacity 3.1 m³ 2.43 - 3.2 m³

    Static Dimensions

    SANY SY500C-10HD Hyundai HX520L
    Overall Length 11700 mm 11680 mm
    Overall width 3360 mm 3340 mm
    Overall Height 3980 mm 3920 mm
    Overall Height of Cab 3470 mm 3420 mm
    Upper Width 3290 mm 2980 mm
    Track Lengh on Ground 4415 mm 4470 mm
    Undercarriage overall length 5440 mm 5490 mm
    Tailswing radius 3765 mm 3800 mm
    Min Ground clearance 560 mm 780 mm
    Track gauge 2740 mm 2740 mm
    Width over tracks 3360 mm NA
    Track Height NA NA
    Counterweight Clearance NA 1445 mm
    Track Shoe Width 600 mm 600 mm

    SANY SY500C-10HD Vs Hyundai HX520L Excavator Specifications

    Engine

    SANY SY500C-10HD Hyundai HX520L
    Model
    Isuzu 403 HP Cummins 335 HP
    Fuel
    Diesel Diesel
    Type
    6 Cylinder , inline , Water Cooled 4 Cycle , 6 Cylinder , Charge Air Cooled , direct injection , Electrical Control Diesel Engine , Turboharged , Water Cooled
    Rated Engine Power
    403 HP (300 kW) @ 1800 rpm 335 HP (250 kW) @ 2100 rpm
    Maximum Torque
    1950 Nm @ 1400 rpm 1674 N.m @1400 rpm
    Piston Displacement
    15.68 L 11.8 L
    Alternator
    70A NA
    Battery
    2 x 12 V 2 x 12V , 200 Ah
    Starting Motor
    24 V - 7.5 kW NA

    Undercarriage

    SANY SY500C-10HD Hyundai HX520L
    No of Top rollers
    2 2
    No of bottom rollers
    9 9
    Track Shoes (Each Side)
    50 53
    Track Guard
    NA 2
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    87.1 kPa 85.3 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    70 % (35°) 35 ° / 70%
    Travel Speed-Low
    3.1 Km/h 3.4 Km/h
    Travel Speed-High
    5.4 Km/h 5.5 Km/h
    Max Tracking Force
    339 kN 389 kN

    Hydraulic Motors

    SANY SY500C-10HD Hyundai HX520L
    Hydraulic pump
    2 Variable Displacement Axial Piston Pumps Variable Displacement Axis Piston Pumps
    Maximum Flow
    2 x 366 L/min 2 x 405 L/min
    Pilot Pump
    Gear Pump Gear Pump
    Implement Circuit
    34.3 MPa 32.3 MPa
    Swing Circuit
    26.9 MPa 27.9 MPa
    Travel circuit
    31.4 MPa 35.3 MPa
    Pilot circuit
    3.9 MPa 3.9 MPa

    Service Capacities

    SANY SY500C-10HD Hyundai HX520L
    Fuel tank
    680 L 660 L
    Engine Coolant
    24 L 43 L
    Engine oil
    50 L 34 L
    Hydraulic system
    NA 499 L
    Hydraulic tank
    480 L 275 L

    Machine Weight

    SANY SY500C-10HD Hyundai HX520L
    Operating Weight
    49500 Kg 50200 Kg

    Working Range

    SANY SY500C-10HD Hyundai HX520L
    Boom length
    6550 mm 6550 mm
    Arm length
    2500 mm 2550 mm
    Max Digging Reach
    10850 mm 10870 mm
    Max Digging Reach on ground
    NA 10610 mm
    Max digging depth
    6600 mm 6380 mm
    Max digging height
    10120 mm 10760 mm
    Max Dump Height
    6700 mm 7290 mm
    Max vertical wallcut depth
    NA 4760 mm
    Min swing radius
    5130 mm 4440 mm
    Max Height at Min Swing radius
    8800 mm NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    280 kN 279.5 kN
    Arm Digging Force
    248 kN 246.2 kN
    Swing Speed
    8.0 rpm 8.8 rpm

    Dozer Blade

    SANY SY500C-10HD Hyundai HX520L
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    SANY SY500C-10HD Hyundai HX520L
    Bucket Capacity
    3.1 m³ 2.43 - 3.2 m³

    Static Dimensions

    SANY SY500C-10HD Hyundai HX520L
    Overall Length
    11700 mm 11680 mm
    Overall width
    3360 mm 3340 mm
    Overall Height
    3980 mm 3920 mm
    Overall Height of Cab
    3470 mm 3420 mm
    Upper Width
    3290 mm 2980 mm
    Track Lengh on Ground
    4415 mm 4470 mm
    Undercarriage overall length
    5440 mm 5490 mm
    Tailswing radius
    3765 mm 3800 mm
    Min Ground clearance
    560 mm 780 mm
    Track gauge
    2740 mm 2740 mm
    Width over tracks
    3360 mm NA
    Track Height
    NA NA
    Counterweight Clearence
    NA 1445 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with SANY SY500C-10HD

    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    VS
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg

    Popular Comparisons with Hyundai HX520L

    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    VS
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg

    Frequently Asked Question

    Ans.

    The SANY SY500C-10HD has the stronger engine. It is rated at 403 HP against the Hyundai HX520L's 335 HP, which gives it more raw power for heavy digging and loading work.

    Ans.

    The SANY SY500C-10HD has the longer warranty, covering 2500 hours. This gives extra cover if you plan to run the machine hard through its first few years of work.

    Ans.

    The Hyundai HX520L is generally cheaper to run. Its fuel use is rated at 30 litres an hour, and its lower engine power compared to the SANY SY500C-10HD usually means lower daily diesel bills too.

    Ans.

    The SANY SY500C-10HD can work longer between fuel stops. It carries a bigger 680-litre fuel tank, which helps on remote sites where a fuel truck cannot visit often.

    Ans.

    It can on very soft ground. The SANY SY500C-10HD has a higher ground bearing pressure than many large excavators, so on wet or marshy sites, check with your dealer whether extra-wide track shoes are available.

    SANY SY500C-10HD Vs Hyundai HX520L - Compare Price & Availability Across 600+ Locations in India

    Compare SANY SY500C-10HD Vs Hyundai HX520L price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare