Click to view details
Desi Machines: Your One-Stop Solution for Heavy Machinery, Comparison, and Unbeatable Deals!

Contact Us

Contact Info

ACE Rhino 110C VS Terex Franna FR20 Crane

ACE Rhino 110C
  • Lift Capacity
    11 Tonnes
  • Boom Height
    9 m
  • Engine
    Mahindra 47.5 HP
  • icon alt1
    Weight
    8150 kg
  • Turning Radius
    5500 mm
  • Drive Type
    2 Wheel drive
₹ 12 - 14 Lakhs*
Pick & Carry Crane
Terex Franna FR20
  • Lift Capacity
    20 Tonnes
  • Boom Height
    20.4 m
  • Engine
    VECV 101 HP
  • icon alt1
    Weight
    16920 kg
  • Turning Radius
    6770 mm
  • Drive Type
    4 Wheel Drive
₹ 45 - 50 Lakhs*
Pick & Carry Crane

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

Key Highlights ACE Rhino 110CTerex Franna FR20
ACE Rhino 110C VS Terex Franna FR20 Crane
ACE Rhino 11 ton Hydra Crane price
ACE Rhino 110C
₹ 12 - 14 Lakhs
Terex Franna FR20 Crane | Mobile crane | Farana crane
Terex Franna FR20
₹ 45 - 50 Lakhs
Particulars ACE Rhino 110C Terex Franna FR20
Overview Summary

The Terex Franna FR20 offers superior lifting capacity, power, and reach, suitable for larger and more complex tasks, whereas the ACE Rhino 110C provides a more cost-effective solution for lighter applications with its ease of maneuverability and lower operating weight.

Terex Franna FR20

Pros:
  • Higher lifting capacity of 20 Tonnes
  • More powerful engine at 101 HP
  • Higher maximum speed without load at 40 km/h
  • 4 Wheel Drive for better traction
  • Longer boom reach up to 18.23 m
Cons:
  • Higher price range between ₹ 45 - 50 Lakhs
  • Larger minimum turning radius of 6770 mm
  • Heavier operating weight at 16920 kg

ACE Rhino 110C

Pros:
  • More affordable price range between ₹ 12 - 14 Lakhs
  • Tighter minimum turning radius of 5500 mm
  • Lower operating weight at 8150 kg
Cons:
  • Lower lifting capacity of 11 Tonnes
  • Less powerful engine at 47.5 HP
  • Slower maximum speed without load at 29 km/h
  • 2 Wheel drive only
  • Shorter boom reach with a maximum height of 9 m

Pros:
Cons:

Closing Recommendation

If your requirements involve heavy lifting and you require the versatility of a 4WD system, the Terex Franna FR20 is the better option despite its higher price. However, if budget constraints are a factor and the tasks involve lighter lifts within smaller worksites, the ACE Rhino 110C may offer a more practical choice.

Price, Technical Specifications & Features

Brand ACE Terex Franna
Type Pick & Carry Crane Pick & Carry Crane
Ex-Showroom Price ₹ 12 - 14 Lakhs ₹ 45 - 50 Lakhs
Lift Capacity 11 Tonnes 20 Tonnes
Boom Height 9 m 20.4 m
Engine Mahindra 47.5 HP VECV 101 HP
Weight 8150 kg 16920 kg
Turning Radius 5500 mm 6770 mm
Drive Type 2 Wheel drive 4 Wheel Drive
Quick Overview:

Designed for versatility, the ACE Rhino 110C Hydra crane supports 11-ton lifting for light-to-medium construction and industrial applications.

Franna FR20 crane lifts 20 tons and supports versatile movement for road, rail, and infrastructure pick-and-carry applications.
Overview Summary

The Terex Franna FR20 offers superior lifting capacity, power, and reach, suitable for larger and more complex tasks, whereas the ACE Rhino 110C provides a more cost-effective solution for lighter applications with its ease of maneuverability and lower operating weight.

Terex Franna FR20

Pros:
  • Higher lifting capacity of 20 Tonnes
  • More powerful engine at 101 HP
  • Higher maximum speed without load at 40 km/h
  • 4 Wheel Drive for better traction
  • Longer boom reach up to 18.23 m
Cons:
  • Higher price range between ₹ 45 - 50 Lakhs
  • Larger minimum turning radius of 6770 mm
  • Heavier operating weight at 16920 kg

ACE Rhino 110C

Pros:
  • More affordable price range between ₹ 12 - 14 Lakhs
  • Tighter minimum turning radius of 5500 mm
  • Lower operating weight at 8150 kg
Cons:
  • Lower lifting capacity of 11 Tonnes
  • Less powerful engine at 47.5 HP
  • Slower maximum speed without load at 29 km/h
  • 2 Wheel drive only
  • Shorter boom reach with a maximum height of 9 m

Pros:
Cons:

Closing Recommendation

If your requirements involve heavy lifting and you require the versatility of a 4WD system, the Terex Franna FR20 is the better option despite its higher price. However, if budget constraints are a factor and the tasks involve lighter lifts within smaller worksites, the ACE Rhino 110C may offer a more practical choice.

Price, Technical Specifications & Features

ACE Rhino 110C Terex Franna FR20
Brand
ACE Terex Franna
Type
Pick & Carry Crane Pick & Carry Crane
Ex-Showroom Price
₹ 12 - 14 Lakhs ₹ 45 - 50 Lakhs
Lift Capacity
11 Tonnes 20 Tonnes
Boom Height
9 m 20.4 m
Engine
Mahindra 47.5 HP VECV 101 HP
Weight
8150 kg 16920 kg
Turning Radius
5500 mm 6770 mm
Drive Type
2 Wheel drive 4 Wheel Drive
Quick Overview:

Designed for versatility, the ACE Rhino 110C Hydra crane supports 11-ton lifting for light-to-medium construction and industrial applications.

Franna FR20 crane lifts 20 tons and supports versatile movement for road, rail, and infrastructure pick-and-carry applications.

Key Highlights

ACE Rhino 110C Terex Franna FR20
Engine Make Mahindra 4485 IAE (BS-III CEV) VECV E483 CEV Stage IV
Articulation 55° 40°
Max. Speed 29 km/h 40 km/h
Fuel Tank 45 L 270 L
Hydraulic Tank 100 L 125 L
Overall Length NA 9684 mm
Overall Width 2400 mm 2543 mm
Wheelbase 4400 mm 3900 mm
Boom Luffing Range -5° to +60° -5°/60°
Warranty 1 Year 1 Yr. / 1000 hr.

Key Highlights

ACE Rhino 110C Terex Franna FR20
Engine Make
Mahindra 4485 IAE (BS-III CEV) VECV E483 CEV Stage IV
Articulation
55° 40°
Max. Speed
29 km/h 40 km/h
Fuel Tank
45 L 270 L
Hydraulic Tank
100 L 125 L
Overall Length
NA 9684 mm
Overall Width
2400 mm 2543 mm
Wheelbase
4400 mm 3900 mm
Boom Luffing Range
-5° to +60° -5°/60°
Warranty
1 Year 1 Yr. / 1000 hr.

Specifications

Engine

ACE Rhino 110C Terex Franna FR20
Engine Make Mahindra 4485 IAE (BS-III CEV) VECV E483 CEV Stage IV
Engine Type 4 cylinder water cooled diesel engine. 4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
Max Power 47.5 HP (34.9 kW) @ 2200 RPM 101 HP (74 kW) @ 2200 RPM
Battery 12V; Negative earth; 75Ah 12V DC
Alternator 35A NA

Lifting Capacity

ACE Rhino 110C Terex Franna FR20
Max. Lifting Capacity 11 Tonnes 20 Tonnes

Transmission & Clutch

ACE Rhino 110C Terex Franna FR20
Drive 2 Wheel drive 4 Wheel Drive
Type Sliding mesh with 6 forward and 2 reverse speed with high low range selector VECV ET60 Synchromesh gear box with 10 forward and 2 reverse speeds with crane/travel mode selector switch

Steering System

ACE Rhino 110C Terex Franna FR20
Steering Type Hydraulically operated Full power orbitrol with twin cushioned double acting rams
Articulation 55° 40°
Turning Radius 5500 mm 6770 mm

Hoist Mechanism

ACE Rhino 110C Terex Franna FR20
Hoist 4 falls; Hydraulic winch; Rope dia 13 mm Single-speed hoist winch with a 5-tonne; paired with a 10-tonne rated 4-part hook block.
Hoist Speed 50 Mtrs./Min (Line Speed) 50 Mtrs./Min (Line Speed)

Brakes

ACE Rhino 110C Terex Franna FR20
Front Wheels Hydraulic brake with pneumatic assistance on front wheels actuated by a single pedal. Fully air operated 'S' cam dual curcuit brakes on front wheels
Rear Wheels Hydraulic brake with pneumatic assistance on rear wheels actuated by a single pedal. Fully air operated 'S' cam dual curcuit brakes on rear wheels
Parking Brake A separate manual parking brake is provided Air operated; spring actuated; fail safe brakes

Service Capacity

ACE Rhino 110C Terex Franna FR20
Engine Oil 8.0 L NA
Fuel Tank 45 L 270 L
Hydraulic Tank 100 L 125 L
Transmission Oil 48 L NA

Overall Dimensions & Weight

ACE Rhino 110C Terex Franna FR20
Overall Length With Bucket NA 9684 mm
Overall Width 2400 mm 2543 mm
Overall Height 2700 mm 2982 mm
Wheel Base 4400 mm 3900 mm
Operating Weight 8150 kg 16920 kg
Front Track NA 1842 mm
Rear Track NA 1842 mm
Front Tyres 11.00 x 20 - 16 PR (4 Nos.) 11.00 x 20 - 16PR (4 Nos.)
Rear Tyres 13.00 x 24 - 12 PR (2 Nos.) 11.00 x 20 - 16PR (4 Nos.)

Boom

ACE Rhino 110C Terex Franna FR20
Telescoping Two-part boom with hydraulically operated extension of 1800 mm stroke with 10 seconds telescoping time. Four‑section U‑section telescoping boom (with a manually extended fourth section) that reaches up to 18.23 m
Derricking Through one double-acting extension cylinder NA
Boom Luffing Time 20 Seconds NA
Boom Luffing Range -5° to +60° -5°/60°
Boom Height 9 m 20.4 m

Specifications

Engine

ACE Rhino 110C Terex Franna FR20
Engine Make
Mahindra 4485 IAE (BS-III CEV) VECV E483 CEV Stage IV
Engine Type
4 cylinder water cooled diesel engine. 4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
Max Power
47.5 HP (34.9 kW) @ 2200 RPM 101 HP (74 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah 12V DC
Alternator
35A NA

Lifting Capacity

ACE Rhino 110C Terex Franna FR20
Max. Lifting Capacity
11 Tonnes 20 Tonnes

Transmission Clutch

ACE Rhino 110C Terex Franna FR20
Drive
2 Wheel drive 4 Wheel Drive
Type
Sliding mesh with 6 forward and 2 reverse speed with high low range selector VECV ET60 Synchromesh gear box with 10 forward and 2 reverse speeds with crane/travel mode selector switch

Steering

ACE Rhino 110C Terex Franna FR20
Steering Type
Hydraulically operated Full power orbitrol with twin cushioned double acting rams
Articulation
55° 40°
Turning Radius
5500 mm 6770 mm

Hoist Mechanism

ACE Rhino 110C Terex Franna FR20
Hoist
4 falls; Hydraulic winch; Rope dia 13 mm Single-speed hoist winch with a 5-tonne; paired with a 10-tonne rated 4-part hook block.
Hoist Speed
50 Mtrs./Min (Line Speed) 50 Mtrs./Min (Line Speed)

Brakes

ACE Rhino 110C Terex Franna FR20
Front Wheels
Hydraulic brake with pneumatic assistance on front wheels actuated by a single pedal. Fully air operated 'S' cam dual curcuit brakes on front wheels
Rear Wheels
Hydraulic brake with pneumatic assistance on rear wheels actuated by a single pedal. Fully air operated 'S' cam dual curcuit brakes on rear wheels
Parking Brake
A separate manual parking brake is provided Air operated; spring actuated; fail safe brakes

Service Capacity

ACE Rhino 110C Terex Franna FR20
Engine Oil
8.0 L NA
Fuel Tank
45 L 270 L
Hydraulic Tank
100 L 125 L
Transmission Oil
48 L NA

Overall Dimension And Weight

ACE Rhino 110C Terex Franna FR20
Overall Length With Bucket
NA 9684 mm
Overall Width
2400 mm 2543 mm
Overall Height
2700 mm 2982 mm
Wheel Base
4400 mm 3900 mm
Operating Weight
8150 kg 16920 kg
Front Track
NA 1842 mm
Rear Track
NA 1842 mm
Front Tyres
11.00 x 20 - 16 PR (4 Nos.) 11.00 x 20 - 16PR (4 Nos.)
Rear Tyres
13.00 x 24 - 12 PR (2 Nos.) 11.00 x 20 - 16PR (4 Nos.)

Boom

ACE Rhino 110C Terex Franna FR20
Telescoping
Two-part boom with hydraulically operated extension of 1800 mm stroke with 10 seconds telescoping time. Four‑section U‑section telescoping boom (with a manually extended fourth section) that reaches up to 18.23 m
Derricking
Through one double-acting extension cylinder NA
Boom Luffing Time
20 Seconds NA
Boom Luffing Range
-5° to +60° -5°/60°
Boom Height
9 m 20.4 m

© 2025 Desi Machines All rights reserved.

Designed & Developed by PromotEdge

Help Us Reach You!

Let's get started

Disclaimer

Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

Compare


    Kindly fill out the below form. Our representative will get in touch with you