Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    JCB 520X LC VS Liugong 950E Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights JCB 520X LCLiugong 950E
    JCB 520X LC VS Liugong 950E Excavator
    JCB 520 Excavator Price
    JCB 520X LC

    Price Available Soon

    Liugong 950E Large (25-50 Ton)
    Liugong 950E

    ₹1.10- 1.20 crore

    Particulars JCB 520X LC Liugong 950E

    JCB 520X LC vs Liugong 950E: Which One to Buy?

    Both these are large, crawler-mounted excavators built for mining and big infrastructure work, so neither carries an on-road price like a wheeled machine — their cost is worked out as a landed cost that adds GST, transport and insurance to the ex-works price. The JCB 520X LC has a reinforced undercarriage built for years of repeated hard use. The Liugong 950E presses down on the ground with less force, so it suits soft, loose or wet soil better.

    If your site runs long hours every day on tough, high-wear ground, the JCB's stronger undercarriage pays off over the years. If your ground is soft or you move the machine often between sites, the Liugong's lower ground pressure and lighter weight make life easier. See the full Liugong excavator range, the JCB excavator range, all excavators, or read our excavator guide.

    JCB 520X LC

    Pros:

    • Higher engine power of 400 HP provides robust performance
    • Larger bucket capacity of 2.8 m³ for increased efficiency
    • Has both greater digging reach and depth compared to Liugong 950E
    • Comes with advanced electrohydraulic systems for precise control
    • Reinforced undercarriage structure ensures durability

    Cons:

    • Higher ground bearing pressure of 91.20 kPa
    • Larger operating weight could limit maneuverability on soft soils
    • Fuel consumption information is provided, which may indicate higher fuel use

    Liugong 950E

    Pros:

    • Offers a variable bucket capacity range of 2.6 - 3.2 m³
    • Lower ground bearing pressure of 82.2 kPa could result in less surface damage
    • Higher warranty coverage of 2500 hr. provides better post-purchase assurance
    • Larger hydraulic tank capacity might result in better hydraulic system cooling and efficiency
    • Lower operating weight could offer better fuel efficiency and ease of transportation

    Cons:

    • Less engine power at 375 HP compared to JCB 520X LC
    • Max tracking force and bucket digging force are slightly lower than JCB 520X LC
    • No mileage information provided could indicate lack of fuel consumption data

    Pros:

    Cons:

    Closing Recommendation

    Both these are large excavators for mining and infrastructure work, and both are landed-cost machines, not on-road ones. Pick the JCB 520X LC when your site runs long, heavy hours every day and needs a stronger undercarriage to last. Pick the Liugong 950E when your ground is soft or you move the machine often between sites. So match the machine to your work: JCB 520X LC for heavy daily use on tough ground, Liugong 950E for soft ground and easier transport.

    JCB 520X LC Vs Liugong 950E Excavator Price, Technical Specifications & Features

    Brand JCB Excavator LiuGong Excavator
    Type Medium (15-25 Ton) Large (25-50 Ton)
    Operating Cost Price Available Soon ₹1.10- 1.20 crore
    Price Price Available Soon ₹1.10- 1.20 crore
    Weight 52000 kg 46500 Kg
    Bucket 2.8 m³ 2.6 - 3.2 m³
    Max Digging Depth 6801 mm 6521 mm
    Engine Cummins 400 HP Cummins 375 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 6500 mm 6500 mm
    Quick Overview:

    The JCB 520X LC is a 52-ton mining crawler excavator powered by a Cummins 400 HP engine. It is built for India’s toughest job sites. Designed for large-scale mining, overburden removal, and high-volume earthmoving, it manages extreme workloads with confidence. The JCB 520X excavator from JCB Construction Equipment has a maximum digging depth of 6,801 mm and carries a large 2.8 m³ bucket for impressive output per cycle. Powerboost technology provides an additional 6% tearing force for up to 9 seconds in compacted rock. A dual slew motor and 6.5 m boom enable quick cycle times and greater material movement each day. Eco, Power, and Lift modes help control fuel costs during long shifts. Auto Idle further reduces fuel use while the machine is idle. With 95% parts availability within 24 hours globally, fleet downtime remains minimal. This large mining excavator in India offers one of the best ROI profiles in its class. This JCB excavator is the right choice for mining contractors and infrastructure companies that operate heavy excavation projects around the clock.

    Production digging is the LiuGong 950E’s brief. A large excavator of 46500 kg, it runs a six-cylinder Cummins QSM 11 rated 375 HP and swings buckets of 2.6-3.2 m³ with 265 kN of bucket digging force, fed by twin 380 L/min pumps. Digging depth is 6521 mm.

    That is quarry bench and overburden territory: feeding crushers, loading dumpers and keeping bulk earthworks on schedule. The 620 L fuel tank stretches refuelling intervals across long shifts, GPS is standard for fleet owners, and the Cummins platform keeps heavy repairs within reach of Indian service workshops.

    Agency review

    Planning to buy the JCB 520X LC Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Liugong 950E Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    JCB 520X LC vs Liugong 950E: Which One to Buy?

    Both these are large, crawler-mounted excavators built for mining and big infrastructure work, so neither carries an on-road price like a wheeled machine — their cost is worked out as a landed cost that adds GST, transport and insurance to the ex-works price. The JCB 520X LC has a reinforced undercarriage built for years of repeated hard use. The Liugong 950E presses down on the ground with less force, so it suits soft, loose or wet soil better.

    If your site runs long hours every day on tough, high-wear ground, the JCB's stronger undercarriage pays off over the years. If your ground is soft or you move the machine often between sites, the Liugong's lower ground pressure and lighter weight make life easier. See the full Liugong excavator range, the JCB excavator range, all excavators, or read our excavator guide.

    JCB 520X LC

    Pros:

    • Higher engine power of 400 HP provides robust performance
    • Larger bucket capacity of 2.8 m³ for increased efficiency
    • Has both greater digging reach and depth compared to Liugong 950E
    • Comes with advanced electrohydraulic systems for precise control
    • Reinforced undercarriage structure ensures durability

    Cons:

    • Higher ground bearing pressure of 91.20 kPa
    • Larger operating weight could limit maneuverability on soft soils
    • Fuel consumption information is provided, which may indicate higher fuel use

    Liugong 950E

    Pros:

    • Offers a variable bucket capacity range of 2.6 - 3.2 m³
    • Lower ground bearing pressure of 82.2 kPa could result in less surface damage
    • Higher warranty coverage of 2500 hr. provides better post-purchase assurance
    • Larger hydraulic tank capacity might result in better hydraulic system cooling and efficiency
    • Lower operating weight could offer better fuel efficiency and ease of transportation

    Cons:

    • Less engine power at 375 HP compared to JCB 520X LC
    • Max tracking force and bucket digging force are slightly lower than JCB 520X LC
    • No mileage information provided could indicate lack of fuel consumption data

    Pros:

    Cons:

    Closing Recommendation

    Both these are large excavators for mining and infrastructure work, and both are landed-cost machines, not on-road ones. Pick the JCB 520X LC when your site runs long, heavy hours every day and needs a stronger undercarriage to last. Pick the Liugong 950E when your ground is soft or you move the machine often between sites. So match the machine to your work: JCB 520X LC for heavy daily use on tough ground, Liugong 950E for soft ground and easier transport.

    JCB 520X LC Vs Liugong 950E Excavator Price, Technical Specifications & Features

    JCB 520X LC Liugong 950E
    Brand
    JCB Excavator LiuGong Excavator
    Type
    Medium (15-25 Ton) Large (25-50 Ton)
    Price
    Price Available Soon ₹1.10- 1.20 crore
    Weight
    52000 kg 46500 Kg
    Bucket
    2.8 m³ 2.6 - 3.2 m³
    Max Digging Depth
    6801 mm 6521 mm
    Engine
    Cummins 400 HP Cummins 375 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    6500 mm 6500 mm
    Quick Overview:

    The JCB 520X LC is a 52-ton mining crawler excavator powered by a Cummins 400 HP engine. It is built for India’s toughest job sites. Designed for large-scale mining, overburden removal, and high-volume earthmoving, it manages extreme workloads with confidence. The JCB 520X excavator from JCB Construction Equipment has a maximum digging depth of 6,801 mm and carries a large 2.8 m³ bucket for impressive output per cycle. Powerboost technology provides an additional 6% tearing force for up to 9 seconds in compacted rock. A dual slew motor and 6.5 m boom enable quick cycle times and greater material movement each day. Eco, Power, and Lift modes help control fuel costs during long shifts. Auto Idle further reduces fuel use while the machine is idle. With 95% parts availability within 24 hours globally, fleet downtime remains minimal. This large mining excavator in India offers one of the best ROI profiles in its class. This JCB excavator is the right choice for mining contractors and infrastructure companies that operate heavy excavation projects around the clock.

    Production digging is the LiuGong 950E’s brief. A large excavator of 46500 kg, it runs a six-cylinder Cummins QSM 11 rated 375 HP and swings buckets of 2.6-3.2 m³ with 265 kN of bucket digging force, fed by twin 380 L/min pumps. Digging depth is 6521 mm.

    That is quarry bench and overburden territory: feeding crushers, loading dumpers and keeping bulk earthworks on schedule. The 620 L fuel tank stretches refuelling intervals across long shifts, GPS is standard for fleet owners, and the Cummins platform keeps heavy repairs within reach of Indian service workshops.

    JCB 520X LC Vs Liugong 950E Excavator Key Highlights

    JCB 520X LC Liugong 950E
    Engine Make Cummins X12 Cummins QSM 11
    Fuel Tank 657 L 620 L
    Engine Displacment 11.8 L 10.8 L
    Under Carriage 5367 mm 5266 mm
    Hydraulic System 450 L 520 L
    Arm 2550 mm 2550m
    Max Digging Reach 10959 mm 10625 mm
    Fuel Consumption 42-60 L/hour NA
    Overall Width 3340 mm 3340 mm
    Overall Length 11789 mm 11515 mm
    Bucket Digging Force 301 kN 265 kN
    Tailswing Radius 3881 mm 3640 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    JCB 520X LC Vs Liugong 950E Excavator Key Highlights

    JCB 520X LC Liugong 950E
    Engine Make
    Cummins X12 Cummins QSM 11
    Fuel Tank
    657 L 620 L
    Engine Displacment
    11.8 L 10.8 L
    Under Carriage
    5367 mm 5266 mm
    Hydraulic System
    450 L 520 L
    Arm
    2550 mm 2550m
    Max Digging Reach
    10959 mm 10625 mm
    Fuel Consumption
    42-60 L/hour NA
    Overall Width
    3340 mm 3340 mm
    Overall Length
    11789 mm 11515 mm
    Bucket Digging Force
    301 kN 265 kN
    Tailswing Radius
    3881 mm 3640 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    JCB 520X LC Vs Liugong 950E Excavator Specifications

    Engine

    18181 3586
    Model Cummins 400 HP Cummins 375 HP
    Fuel Diesel Diesel
    Type 4 stroke; 6 cylinder in-line; direct injection; turbocharged diesel 6 Cylinders , Turbocharged CAC
    Rated Engine Power 400 HP (298 kW) @ 1800 rpm 375 HP (279 kW) @ 2100 rpm
    Maximum Torque 1969 Nm @ 1400 rpm 1898 Nm @ 1400 rpm
    Piston Displacement 11.8 L 10.8 L
    Alternator 24 V - 120A NA
    Battery 24 V NA
    Starting Motor 24 V NA

    Undercarriage

    NA NA
    No of Top rollers 2 2
    No of bottom rollers 9 9
    Track Shoes (Each Side) 49 51
    Track Guard 3 NA
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure 91.20 kPa 82.2 kPa
    Track Tensioning Grease Grease
    Gradeability 70% (35°) continuous 70% (35 °)
    Travel Speed-Low 3.1 Km/h 3.3 Km/h
    Travel Speed-High 5.1 Km/h 5.5 Km/h
    Max Tracking Force 378.7 kN 386 kN

    Hydraulic System

    JCB 520X LC Liugong 950E
    Hydraulic pump 2 variable displacement axial piston type Two Varibale Displacement Piston Pump
    Maximum Flow 2 x 404 L/min 2 x 380 L/min
    Pilot Pump Gear Pump Gear Pump
    Implement Circuit 34.3 MPa 32.3 MPa
    Swing Circuit 31.5 MPa 28 MPa
    Travel circuit 32.4 MPa 32.3 MPa
    Pilot circuit 4.0 MPa 3.9 MPa

    Hydraulic Motors

    JCB 520X LC Liugong 950E
    Travel Variable swash axial piston type; fully guarded within undercarriage frame Axial Piston Motor
    Swing Axial Piston Type x 2 Axial Piston Motor

    Service Capacities

    JCB 520X LC Liugong 950E
    Fuel tank 657 L 620 L
    Engine Coolant 46 L 37.8 L
    Engine oil 42.5 L 50 L
    Hydraulic system 450 L 520 L
    Hydraulic tank 220 L 290 L

    Machine Weight

    JCB 520X LC Liugong 950E
    Operating Weight 52000 kg 46500 Kg

    Working Range

    JCB 520X LC Liugong 950E
    Boom length 6500 mm 6500 mm
    Arm length 2550 mm 2550m
    Max Digging Reach 10959 mm 10625 mm
    Max Digging Reach on ground 10693 mm 10388 mm
    Max digging depth 6801 mm 6521 mm
    Max digging height 10929 mm 9977 mm
    Max Dump Height 7292 mm 7038 mm
    Max vertical wallcut depth 6200 mm 5204 mm
    Min swing radius 4776 mm 4645 mm
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 301 kN 265 kN
    Arm Digging Force 263 kN 255 kN
    Swing Speed 9.2 rpm 8.5 rpm

    Dozer Blade

    JCB 520X LC Liugong 950E
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    JCB 520X LC Liugong 950E
    Bucket Capacity 2.8 m³ 2.6 - 3.2 m³

    Static Dimensions

    JCB 520X LC Liugong 950E
    Overall Length 11789 mm 11515 mm
    Overall width 3340 mm 3340 mm
    Overall Height 4106 mm 3810 mm
    Overall Height of Cab 3455 mm 3550 mm
    Upper Width 2989 mm 3170 mm
    Track Lengh on Ground 4370 mm 4257 mm
    Undercarriage overall length 5367 mm 5266 mm
    Tailswing radius 3881 mm 3640 mm
    Min Ground clearance 603 mm 532 mm
    Track gauge 2740 mm 2740 mm
    Width over tracks 3340 mm NA
    Track Height 1218 mm NA
    Counterweight Clearance 1449 mm 1324 mm
    Track Shoe Width 600 mm 600 mm

    JCB 520X LC Vs Liugong 950E Excavator Specifications

    Engine

    JCB 520X LC Liugong 950E
    Model
    Cummins 400 HP Cummins 375 HP
    Fuel
    Diesel Diesel
    Type
    4 stroke; 6 cylinder in-line; direct injection; turbocharged diesel 6 Cylinders , Turbocharged CAC
    Rated Engine Power
    400 HP (298 kW) @ 1800 rpm 375 HP (279 kW) @ 2100 rpm
    Maximum Torque
    1969 Nm @ 1400 rpm 1898 Nm @ 1400 rpm
    Piston Displacement
    11.8 L 10.8 L
    Alternator
    24 V - 120A NA
    Battery
    24 V NA
    Starting Motor
    24 V NA

    Undercarriage

    JCB 520X LC Liugong 950E
    No of Top rollers
    2 2
    No of bottom rollers
    9 9
    Track Shoes (Each Side)
    49 51
    Track Guard
    3 NA
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    91.20 kPa 82.2 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    70% (35°) continuous 70% (35 °)
    Travel Speed-Low
    3.1 Km/h 3.3 Km/h
    Travel Speed-High
    5.1 Km/h 5.5 Km/h
    Max Tracking Force
    378.7 kN 386 kN

    Hydraulic Motors

    JCB 520X LC Liugong 950E
    Hydraulic pump
    2 variable displacement axial piston type Two Varibale Displacement Piston Pump
    Maximum Flow
    2 x 404 L/min 2 x 380 L/min
    Pilot Pump
    Gear Pump Gear Pump
    Implement Circuit
    34.3 MPa 32.3 MPa
    Swing Circuit
    31.5 MPa 28 MPa
    Travel circuit
    32.4 MPa 32.3 MPa
    Pilot circuit
    4.0 MPa 3.9 MPa

    Service Capacities

    JCB 520X LC Liugong 950E
    Fuel tank
    657 L 620 L
    Engine Coolant
    46 L 37.8 L
    Engine oil
    42.5 L 50 L
    Hydraulic system
    450 L 520 L
    Hydraulic tank
    220 L 290 L

    Machine Weight

    JCB 520X LC Liugong 950E
    Operating Weight
    52000 kg 46500 Kg

    Working Range

    JCB 520X LC Liugong 950E
    Boom length
    6500 mm 6500 mm
    Arm length
    2550 mm 2550m
    Max Digging Reach
    10959 mm 10625 mm
    Max Digging Reach on ground
    10693 mm 10388 mm
    Max digging depth
    6801 mm 6521 mm
    Max digging height
    10929 mm 9977 mm
    Max Dump Height
    7292 mm 7038 mm
    Max vertical wallcut depth
    6200 mm 5204 mm
    Min swing radius
    4776 mm 4645 mm
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    301 kN 265 kN
    Arm Digging Force
    263 kN 255 kN
    Swing Speed
    9.2 rpm 8.5 rpm

    Dozer Blade

    JCB 520X LC Liugong 950E
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    JCB 520X LC Liugong 950E
    Bucket Capacity
    2.8 m³ 2.6 - 3.2 m³

    Static Dimensions

    JCB 520X LC Liugong 950E
    Overall Length
    11789 mm 11515 mm
    Overall width
    3340 mm 3340 mm
    Overall Height
    4106 mm 3810 mm
    Overall Height of Cab
    3455 mm 3550 mm
    Upper Width
    2989 mm 3170 mm
    Track Lengh on Ground
    4370 mm 4257 mm
    Undercarriage overall length
    5367 mm 5266 mm
    Tailswing radius
    3881 mm 3640 mm
    Min Ground clearance
    603 mm 532 mm
    Track gauge
    2740 mm 2740 mm
    Width over tracks
    3340 mm NA
    Track Height
    1218 mm NA
    Counterweight Clearence
    1449 mm 1324 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with Liugong 950E

    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    LiuGong Liugong 939E HD
    4.5 rating
    ₹1.00 - 1.10 crore
    38400 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Volvo Volvo EC380D
    4.5 rating
    ₹1.40 - 1.80 Crore
    37800 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Tata Hitachi Tata Hitachi ZAXIS 400MTH
    4.5 rating
    ₹1.50 - 1.70 crore
    37600 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    SANY SANY SY390C-10HD GraMa
    4.5 rating
    ₹1.28 - 1.35 crore
    37500 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Kobelco Kobelco SK380XDLC
    4.5 rating
    ₹1.20 - 1.30 crore
    37400 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    JCB JCB 385LC Quarry Master
    4.5 rating
    ₹1.25 - 1.27 crore
    37733 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    JCB JCB 385LC
    4.5 rating
    ₹1.20 - 1.22 crore
    37331 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Hyundai Hyundai HX380L
    4.5 rating
    ₹1.2 - 1.38 crore
    37200 Kg
    VS
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg

    Frequently Asked Question

    Ans.

    No, the JCB 520X LC does not have an on-road price. It runs on tracks, not wheels, so it is not RTO-registered like a truck. Its total landed cost instead includes the ex-works price, GST, trailer transport to your site, and first-year insurance. Ask your dealer for the full landed cost, not just a price on paper.

    Ans.

    The Liugong 950E handles soft or loose ground better. It presses down on the ground with less force than the JCB 520X LC, so it is less likely to sink or dig itself in on wet or reclaimed soil.

    Ans.

    The JCB 520X LC is built for longer heavy-duty use. It has a reinforced undercarriage structure made for repeated hard work, which matters most on mining and large infrastructure sites running long hours every day.

    Ans.

    The Liugong 950E comes with a clearly stated warranty of 2500 hours. Ask your JCB dealer for the exact warranty terms on the 520X LC so you can compare both on equal footing before you decide.

    Ans.

    The Liugong 950E is easier to move between sites. It weighs less than the JCB 520X LC, which can mean simpler transport and lower trailer and permit costs when shifting the machine over long distances.

    JCB 520X LC Vs Liugong 950E - Compare Price & Availability Across 600+ Locations in India

    Compare JCB 520X LC Vs Liugong 950E price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare