Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    Komatsu PC210-10M0 VS XCMG XE250C GM Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Komatsu PC210-10M0XCMG XE250C GM
    Komatsu PC210-10M0 VS XCMG XE250C GM Excavator
    Komatsu PC210 price in India
    Komatsu PC210-10M0

    ₹65 - 75 lakh

    XCMG XE250C GM Excavator | Desi Machines
    XCMG XE250C GM

    ₹76 - 80 lakh

    Particulars Komatsu PC210-10M0 XCMG XE250C GM

    Komatsu PC210-10M0 vs XCMG XE250C GM: Versatility vs Reach

    The Komatsu PC210-10M0 and the XCMG XE250C GM sit in a similar size class, but they are built with slightly different jobs in mind. The PC210-10M0 offers a wider range of bucket sizes and standard tech features, useful for a driver who switches between different types of digging and loading work on the same site. The XE250C GM is the heavier of the two and digs deeper and farther, which suits jobs where reach and depth matter more than switching buckets often.

    A rental fleet or contractor handling varied jobs, from trenching to loading, often benefits from the PC210-10M0's flexibility. A contractor working deeper foundation or drainage work, where digging depth and reach decide whether the job gets done in one setup, may prefer the XE250C GM. Compare both fully on the excavator hub and read the excavator buying guide before you decide.

    Komatsu PC210-10M0

    Pros:

    • Has a variety of bucket sizes ranging from 0.85 to 1.70 m³
    • Equipped with advanced GPS and AC cabin as standard features
    • Komatsu SAA4D107E-1 engine with decent power output of 165 HP
    • Possesses a higher bucket digging force of 149 kN
    • Better gradeability of 70% (35°)
    • Can travel a bit faster with a travel speed-high of 5.5 Km/h
    • Comparatively lower ground bearing pressure of 51.9 kPa

    Cons:

    • Lower operating weight of 20900 Kg might affect stability
    • Engine torque specification is not provided
    • Mileage information is unavailable

    XCMG XE250C GM

    Pros:

    • Powerful Isuzu engine with higher rated engine power of 174.7 HP
    • More robust with higher operating weight of 24500 Kg
    • Larger standard bucket size of 1.2 m³
    • Higher maximum digging reach of 10240 mm
    • Fuel efficiency mentioned (15-22 L/hour)
    • Maximum digging depth is greater at 6960 mm

    Cons:

    • Hydraulic system pump capacity not provided
    • Lower swing speed of 12.1 rpm
    • Limited information on alternator and starting motor specifications
    • High fuel tank capacity but no detailed fuel consumption rates

    Pros:

    Cons:

    Closing Recommendation

    Think about whether your work needs flexibility across job types or depth and reach on a single task. So match the machine to your work: Komatsu PC210-10M0 for varied digging and loading jobs that benefit from flexible bucket sizes, XCMG XE250C GM for deeper foundation and drainage work that needs more reach and depth.

    Komatsu PC210-10M0 Vs XCMG XE250C GM Excavator Price, Technical Specifications & Features

    Brand L&T Komatsu Excavator XCMG Excavator
    Type Medium (15-25 Ton) Medium (15-25 Ton)
    Operating Cost ₹65 - 75 lakh ₹76 - 80 lakh
    Price ₹65 - 75 lakh ₹76 - 80 lakh
    Weight 20900 Kg 24500 kg
    Bucket 0.85 - 1.70 m³ 1.2 m³
    Max Digging Depth 6000 mm 6960 mm
    Engine Komatsu 165 HP Isuzu 174.7 HP
    Warranty 1 Yr. / 3000 hr. 1 Yr. / 2000 hr.
    Boom 5700 mm 6000 mm
    Quick Overview:

    The Komatsu PC210-10M0 is also a 21-ton class hydraulic excavator, built for heavy construction, mining, quarrying, and infrastructure uses. It is powered by a Komatsu SAA6D107E-1 water-cooled, 6-cylinder direct injection diesel engine producing 165 HP at 2,000 rpm, ensuring reliable performance and efficient fuel use. Weighing 20,900 kg to 22,000 kg for LC variants, it provides a solid and stable platform for demanding job conditions. The bucket capacity ranges from 0.85 m³ to 1.7 m³ based on the application, with standard general-purpose buckets around 1.0 to 1.1 m³ designed for effective material handling. It can dig to a maximum depth of about 6,000 mm and reach roughly 9,390 mm, making this Komatsu excavator capable of deep excavation and large-scale earthmoving. Intelligent engine management along with Komatsu’s hydraulic system improves cycle times and reduces fuel consumption by up to 20% compared to earlier models. Multiple working modes, KOMTRAX monitoring, and a self-diagnostic TFT monitor allow operators to boost performance and efficiently track machine health. Reinforced structures, a heavy-duty undercarriage, and improved swing circle durability ensure a long service life in harsh environments. The Komatsu 210 excavator price in India from Komatsu Construction Equipment ranges from Rs. 65 to 75 lakh. It is a high-performance choice for contractors with demanding productivity needs on medium to heavy-duty projects in India.

    The XE250C GM Excavator is built for tough granite, marble, and coal mining jobs. It has a 174.7 hp Isuzu engine that provides strong performance, durability, and good fuel efficiency for heavy work. With an operating weight of 24,500 kg and a 1.2 m³ bucket, this XCMG excavator can easily manage abrasive materials and rough terrain. Its strong frame and effective hydraulics offer powerful digging force and accurate control. This XCMG 25-ton excavator is perfect for stone extraction and open-pit coal mining. This excavator from XCMG Construction Equipment ensures high productivity, shorter cycle times, and reliable operation with little downtime.

    Agency review

    Planning to buy the Komatsu PC210-10M0 Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the XCMG XE250C GM Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Komatsu PC210-10M0 vs XCMG XE250C GM: Versatility vs Reach

    The Komatsu PC210-10M0 and the XCMG XE250C GM sit in a similar size class, but they are built with slightly different jobs in mind. The PC210-10M0 offers a wider range of bucket sizes and standard tech features, useful for a driver who switches between different types of digging and loading work on the same site. The XE250C GM is the heavier of the two and digs deeper and farther, which suits jobs where reach and depth matter more than switching buckets often.

    A rental fleet or contractor handling varied jobs, from trenching to loading, often benefits from the PC210-10M0's flexibility. A contractor working deeper foundation or drainage work, where digging depth and reach decide whether the job gets done in one setup, may prefer the XE250C GM. Compare both fully on the excavator hub and read the excavator buying guide before you decide.

    Komatsu PC210-10M0

    Pros:

    • Has a variety of bucket sizes ranging from 0.85 to 1.70 m³
    • Equipped with advanced GPS and AC cabin as standard features
    • Komatsu SAA4D107E-1 engine with decent power output of 165 HP
    • Possesses a higher bucket digging force of 149 kN
    • Better gradeability of 70% (35°)
    • Can travel a bit faster with a travel speed-high of 5.5 Km/h
    • Comparatively lower ground bearing pressure of 51.9 kPa

    Cons:

    • Lower operating weight of 20900 Kg might affect stability
    • Engine torque specification is not provided
    • Mileage information is unavailable

    XCMG XE250C GM

    Pros:

    • Powerful Isuzu engine with higher rated engine power of 174.7 HP
    • More robust with higher operating weight of 24500 Kg
    • Larger standard bucket size of 1.2 m³
    • Higher maximum digging reach of 10240 mm
    • Fuel efficiency mentioned (15-22 L/hour)
    • Maximum digging depth is greater at 6960 mm

    Cons:

    • Hydraulic system pump capacity not provided
    • Lower swing speed of 12.1 rpm
    • Limited information on alternator and starting motor specifications
    • High fuel tank capacity but no detailed fuel consumption rates

    Pros:

    Cons:

    Closing Recommendation

    Think about whether your work needs flexibility across job types or depth and reach on a single task. So match the machine to your work: Komatsu PC210-10M0 for varied digging and loading jobs that benefit from flexible bucket sizes, XCMG XE250C GM for deeper foundation and drainage work that needs more reach and depth.

    Komatsu PC210-10M0 Vs XCMG XE250C GM Excavator Price, Technical Specifications & Features

    Komatsu PC210-10M0 XCMG XE250C GM
    Brand
    L&T Komatsu Excavator XCMG Excavator
    Type
    Medium (15-25 Ton) Medium (15-25 Ton)
    Price
    ₹65 - 75 lakh ₹76 - 80 lakh
    Weight
    20900 Kg 24500 kg
    Bucket
    0.85 - 1.70 m³ 1.2 m³
    Max Digging Depth
    6000 mm 6960 mm
    Engine
    Komatsu 165 HP Isuzu 174.7 HP
    Warranty
    1 Yr. / 3000 hr. 1 Yr. / 2000 hr.
    Boom
    5700 mm 6000 mm
    Quick Overview:

    The Komatsu PC210-10M0 is also a 21-ton class hydraulic excavator, built for heavy construction, mining, quarrying, and infrastructure uses. It is powered by a Komatsu SAA6D107E-1 water-cooled, 6-cylinder direct injection diesel engine producing 165 HP at 2,000 rpm, ensuring reliable performance and efficient fuel use. Weighing 20,900 kg to 22,000 kg for LC variants, it provides a solid and stable platform for demanding job conditions. The bucket capacity ranges from 0.85 m³ to 1.7 m³ based on the application, with standard general-purpose buckets around 1.0 to 1.1 m³ designed for effective material handling. It can dig to a maximum depth of about 6,000 mm and reach roughly 9,390 mm, making this Komatsu excavator capable of deep excavation and large-scale earthmoving. Intelligent engine management along with Komatsu’s hydraulic system improves cycle times and reduces fuel consumption by up to 20% compared to earlier models. Multiple working modes, KOMTRAX monitoring, and a self-diagnostic TFT monitor allow operators to boost performance and efficiently track machine health. Reinforced structures, a heavy-duty undercarriage, and improved swing circle durability ensure a long service life in harsh environments. The Komatsu 210 excavator price in India from Komatsu Construction Equipment ranges from Rs. 65 to 75 lakh. It is a high-performance choice for contractors with demanding productivity needs on medium to heavy-duty projects in India.

    The XE250C GM Excavator is built for tough granite, marble, and coal mining jobs. It has a 174.7 hp Isuzu engine that provides strong performance, durability, and good fuel efficiency for heavy work. With an operating weight of 24,500 kg and a 1.2 m³ bucket, this XCMG excavator can easily manage abrasive materials and rough terrain. Its strong frame and effective hydraulics offer powerful digging force and accurate control. This XCMG 25-ton excavator is perfect for stone extraction and open-pit coal mining. This excavator from XCMG Construction Equipment ensures high productivity, shorter cycle times, and reliable operation with little downtime.

    Komatsu PC210-10M0 Vs XCMG XE250C GM Excavator Key Highlights

    Komatsu PC210-10M0 XCMG XE250C GM
    Engine Make Komatsu SAA4D107E-1 Isuzu CC-6BG1TRP
    Fuel Tank 400 L 400 L
    Engine Displacment 6.69 L 6.5 L
    Under Carriage 4070 mm 4445 mm
    Hydraulic System NA 350 L
    Arm 2410 mm 2960 mm
    Max Digging Reach 9390 mm 10240 mm
    Fuel Consumption NA 15-22 L/hour
    Overall Width 2800 mm 2990 mm
    Overall Length 9600 mm 10160 mm
    Bucket Digging Force 149 kN 185 kN
    Tailswing Radius 2900 mm 2955 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    Komatsu PC210-10M0 Vs XCMG XE250C GM Excavator Key Highlights

    Komatsu PC210-10M0 XCMG XE250C GM
    Engine Make
    Komatsu SAA4D107E-1 Isuzu CC-6BG1TRP
    Fuel Tank
    400 L 400 L
    Engine Displacment
    6.69 L 6.5 L
    Under Carriage
    4070 mm 4445 mm
    Hydraulic System
    NA 350 L
    Arm
    2410 mm 2960 mm
    Max Digging Reach
    9390 mm 10240 mm
    Fuel Consumption
    NA 15-22 L/hour
    Overall Width
    2800 mm 2990 mm
    Overall Length
    9600 mm 10160 mm
    Bucket Digging Force
    149 kN 185 kN
    Tailswing Radius
    2900 mm 2955 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    Komatsu PC210-10M0 Vs XCMG XE250C GM Excavator Specifications

    Engine

    3575 17435
    Model Komatsu 165 HP Isuzu 174.7 HP
    Fuel Diesel Diesel
    Type 4 Cycle , 6 Cylinders Water-cooled , direct injection Turbocharged & aftercooled 6 Cylinder; Turbocharged; Air to Air Intercooler
    Rated Engine Power 165 HP (123 kW) @ 2000 rpm 174.7 HP (130 kW) @ 2100 rpm
    Maximum Torque NA 637 Nm @ 1800 rpm
    Piston Displacement 6.69 L 6.5 L
    Alternator 24V / 60A NA
    Battery 2 x 12V , 88 Ah 2 x 12V
    Starting Motor 24V-4.5 kW NA

    Undercarriage

    NA NA
    No of Top rollers 2 2
    No of bottom rollers 7 9
    Track Shoes (Each Side) 45 49
    Track Guard NA 2
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure 51.9 kPa NA
    Track Tensioning Grease Grease
    Gradeability 70% (35°) 35°
    Travel Speed-Low 3.0 Km/h NA
    Travel Speed-High 5.5 Km/h 6 Km/h
    Max Tracking Force 178 kN 205 kN

    Hydraulic System

    Komatsu PC210-10M0 XCMG XE250C GM
    Hydraulic pump Variable Displacement Piston Type 2 Variable Displacement Axial Piston Pumps
    Maximum Flow 475 L/min 2 x 246 L/min
    Pilot Pump NA Gear Pump
    Implement Circuit 37.3 MPa 34.4 MPa
    Swing Circuit 28.9 MPa 25 MPa
    Travel circuit 37.3 MPa 34.4 MPa
    Pilot circuit 3.2 MPa 3.9 MPa

    Hydraulic Motors

    Komatsu PC210-10M0 XCMG XE250C GM
    Travel 2 Axial Piston motor with parkeing brake NA
    Swing 1 Axial Piston Motor with swing holding brake NA

    Service Capacities

    Komatsu PC210-10M0 XCMG XE250C GM
    Fuel tank 400 L 400 L
    Engine Coolant 21.8 L 26 L
    Engine oil 23.1 L 25 L
    Hydraulic system NA 350 L
    Hydraulic tank 135 L 240 L

    Machine Weight

    Komatsu PC210-10M0 XCMG XE250C GM
    Operating Weight 20900 Kg 24500 kg

    Working Range

    Komatsu PC210-10M0 XCMG XE250C GM
    Boom length 5700 mm 6000 mm
    Arm length 2410 mm 2960 mm
    Max Digging Reach 9390 mm 10240 mm
    Max Digging Reach on ground 9195 mm NA
    Max digging depth 6000 mm 6960 mm
    Max digging height 9830 mm 9545 mm
    Max Dump Height 6960 mm 6725 mm
    Max vertical wallcut depth 5080 mm 6090 mm
    Min swing radius 3080 mm 3850 mm
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 149 kN 185 kN
    Arm Digging Force 127 kN 129 kN
    Swing Speed 12.4 rpm 12.1 rpm

    Dozer Blade

    Komatsu PC210-10M0 XCMG XE250C GM
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    Komatsu PC210-10M0 XCMG XE250C GM
    Bucket Capacity 0.85 - 1.70 m³ 1.2 m³

    Static Dimensions

    Komatsu PC210-10M0 XCMG XE250C GM
    Overall Length 9600 mm 10160 mm
    Overall width 2800 mm 2990 mm
    Overall Height 3190 mm 3100 mm
    Overall Height of Cab 2095 mm 3100 mm
    Upper Width 2710 mm 2830 mm
    Track Lengh on Ground 3275 mm 3650 mm
    Undercarriage overall length 4070 mm 4445 mm
    Tailswing radius 2900 mm 2955 mm
    Min Ground clearance 440 mm 485 mm
    Track gauge 2200 mm 2390 mm
    Width over tracks 2800 mm 2990 mm
    Track Height NA 942 mm
    Counterweight Clearance 1085 mm 1050 mm
    Track Shoe Width 600 mm 600 mm

    Komatsu PC210-10M0 Vs XCMG XE250C GM Excavator Specifications

    Engine

    Komatsu PC210-10M0 XCMG XE250C GM
    Model
    Komatsu 165 HP Isuzu 174.7 HP
    Fuel
    Diesel Diesel
    Type
    4 Cycle , 6 Cylinders Water-cooled , direct injection Turbocharged & aftercooled 6 Cylinder; Turbocharged; Air to Air Intercooler
    Rated Engine Power
    165 HP (123 kW) @ 2000 rpm 174.7 HP (130 kW) @ 2100 rpm
    Maximum Torque
    NA 637 Nm @ 1800 rpm
    Piston Displacement
    6.69 L 6.5 L
    Alternator
    24V / 60A NA
    Battery
    2 x 12V , 88 Ah 2 x 12V
    Starting Motor
    24V-4.5 kW NA

    Undercarriage

    Komatsu PC210-10M0 XCMG XE250C GM
    No of Top rollers
    2 2
    No of bottom rollers
    7 9
    Track Shoes (Each Side)
    45 49
    Track Guard
    NA 2
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    51.9 kPa NA
    Track Tensioning
    Grease Grease
    Gradeability
    70% (35°) 35°
    Travel Speed-Low
    3.0 Km/h NA
    Travel Speed-High
    5.5 Km/h 6 Km/h
    Max Tracking Force
    178 kN 205 kN

    Hydraulic Motors

    Komatsu PC210-10M0 XCMG XE250C GM
    Hydraulic pump
    Variable Displacement Piston Type 2 Variable Displacement Axial Piston Pumps
    Maximum Flow
    475 L/min 2 x 246 L/min
    Pilot Pump
    NA Gear Pump
    Implement Circuit
    37.3 MPa 34.4 MPa
    Swing Circuit
    28.9 MPa 25 MPa
    Travel circuit
    37.3 MPa 34.4 MPa
    Pilot circuit
    3.2 MPa 3.9 MPa

    Service Capacities

    Komatsu PC210-10M0 XCMG XE250C GM
    Fuel tank
    400 L 400 L
    Engine Coolant
    21.8 L 26 L
    Engine oil
    23.1 L 25 L
    Hydraulic system
    NA 350 L
    Hydraulic tank
    135 L 240 L

    Machine Weight

    Komatsu PC210-10M0 XCMG XE250C GM
    Operating Weight
    20900 Kg 24500 kg

    Working Range

    Komatsu PC210-10M0 XCMG XE250C GM
    Boom length
    5700 mm 6000 mm
    Arm length
    2410 mm 2960 mm
    Max Digging Reach
    9390 mm 10240 mm
    Max Digging Reach on ground
    9195 mm NA
    Max digging depth
    6000 mm 6960 mm
    Max digging height
    9830 mm 9545 mm
    Max Dump Height
    6960 mm 6725 mm
    Max vertical wallcut depth
    5080 mm 6090 mm
    Min swing radius
    3080 mm 3850 mm
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    149 kN 185 kN
    Arm Digging Force
    127 kN 129 kN
    Swing Speed
    12.4 rpm 12.1 rpm

    Dozer Blade

    Komatsu PC210-10M0 XCMG XE250C GM
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    Komatsu PC210-10M0 XCMG XE250C GM
    Bucket Capacity
    0.85 - 1.70 m³ 1.2 m³

    Static Dimensions

    Komatsu PC210-10M0 XCMG XE250C GM
    Overall Length
    9600 mm 10160 mm
    Overall width
    2800 mm 2990 mm
    Overall Height
    3190 mm 3100 mm
    Overall Height of Cab
    2095 mm 3100 mm
    Upper Width
    2710 mm 2830 mm
    Track Lengh on Ground
    3275 mm 3650 mm
    Undercarriage overall length
    4070 mm 4445 mm
    Tailswing radius
    2900 mm 2955 mm
    Min Ground clearance
    440 mm 485 mm
    Track gauge
    2200 mm 2390 mm
    Width over tracks
    2800 mm 2990 mm
    Track Height
    NA 942 mm
    Counterweight Clearence
    1085 mm 1050 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with Komatsu PC210-10M0

    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Volvo 215 Excavator Price in India
    Volvo Volvo EC215
    4.5 rating
    ₹65 - 75 lakh
    21150 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    XCMG XE215i Medium (15-25 Ton)
    XCMG XCMG XE215i
    4.5 rating
    ₹51 - 56 lakh
    21000 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    SANY SY220C-9XL Sparc+ Medium (15-25 Ton)
    SANY SANY SY220C-9XL Sparc+
    4.5 rating
    ₹55 - 66 lakh
    22200 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    SANY SY215C-9LCS Medium (15-25 Ton)
    SANY SANY SY215C-9LCS
    4.5 rating
    ₹53 - 59 lakh
    21800 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    SANY SY240C-9HD GraMa Medium (15-25 Ton)
    SANY SANY SY240C-9HD GraMa
    4.5 rating
    ₹70 - 80 lakh
    24410 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Hyundai 215 Excavator Price in India
    Hyundai Hyundai R215L SMART X Plus
    4.5 rating
    ₹65 - 70 lakh
    22200 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Hyundai Hyundai R220LS SMART X Plus
    4.5 rating
    ₹64 - 70 lakh
    22000 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    CAT 324 Excavator
    Caterpillar CAT 324
    4.5 rating
    ₹76 - 88 lakh
    22700 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Caterpillar CAT 322
    4.5 rating
    ₹75 - 85 lakh
    20700 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Caterpillar CAT 321
    4.5 rating
    ₹75 - 85 lakh
    19300 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Volvo 220 Excavator Price in India
    Volvo Volvo EC220
    4.5 rating
    ₹65 – 75 lakh
    22338 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    JCB JCB NXT 210LC Fuel Master
    4.5 rating
    ₹54 - 57 lakh
    21250 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Hyundai 230 Excavator Price in India
    Hyundai Hyundai R230LM SMART X Plus
    4.5 rating
    ₹70 - 72 lakh
    23300 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Hyundai Hyundai R215 SMART X Plus
    4.5 rating
    ₹64 - 66 lakh
    21700 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Hyundai Hyundai R210 SMART X Plus
    4.5 rating
    ₹63 - 65 lakh
    21200 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Volvo Volvo EC220D
    4.5 rating
    ₹64 - 68 lakh
    21000 kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Tata Hitachi Tata Hitachi EX 215LC Prime
    4.5 rating
    ₹64 - 66 lakh
    20800 Kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Tata Hitachi Tata Hitachi EX 210 Infra Super+ Series
    4.5 rating
    ₹60 – 65 lakh
    20300 Kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    LiuGong Liugong 922Ea (Alpha)
    4.5 rating
    ₹52 - 56 lakh
    21700 Kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    JCB JCB NXT 215 LC Fuel Master
    4.5 rating
    ₹57 - 59 lakh
    21500 Kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Volvo 210 Excavator Price in India
    Volvo Volvo EC210
    4.5 rating
    ₹62 - 72 lakh
    20700 Kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Liebherr Liebherr R 924 Litronic
    4.5 rating
    Price Available Soon
    24950 Kg
    VS
    L&T Komatsu Komatsu PC210-10M0
    4.5 rating
    ₹65 - 75 lakh
    20900 Kg
    Liebherr Liebherr R 922 Litronic
    4.5 rating
    Price Available Soon
    22550 Kg

    Popular Comparisons with XCMG XE250C GM

    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Volvo 215 Excavator Price in India
    Volvo Volvo EC215
    4.5 rating
    ₹65 - 75 lakh
    21150 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    XCMG XE215i Medium (15-25 Ton)
    XCMG XCMG XE215i
    4.5 rating
    ₹51 - 56 lakh
    21000 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    SANY SY220C-9XL Sparc+ Medium (15-25 Ton)
    SANY SANY SY220C-9XL Sparc+
    4.5 rating
    ₹55 - 66 lakh
    22200 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    SANY SY215C-9LCS Medium (15-25 Ton)
    SANY SANY SY215C-9LCS
    4.5 rating
    ₹53 - 59 lakh
    21800 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    SANY SY240C-9HD GraMa Medium (15-25 Ton)
    SANY SANY SY240C-9HD GraMa
    4.5 rating
    ₹70 - 80 lakh
    24410 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Hyundai 215 Excavator Price in India
    Hyundai Hyundai R215L SMART X Plus
    4.5 rating
    ₹65 - 70 lakh
    22200 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Hyundai Hyundai R220LS SMART X Plus
    4.5 rating
    ₹64 - 70 lakh
    22000 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    CAT 324 Excavator
    Caterpillar CAT 324
    4.5 rating
    ₹76 - 88 lakh
    22700 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Caterpillar CAT 322
    4.5 rating
    ₹75 - 85 lakh
    20700 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Volvo 220 Excavator Price in India
    Volvo Volvo EC220
    4.5 rating
    ₹65 – 75 lakh
    22338 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    JCB JCB NXT 210LC Fuel Master
    4.5 rating
    ₹54 - 57 lakh
    21250 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Hyundai 230 Excavator Price in India
    Hyundai Hyundai R230LM SMART X Plus
    4.5 rating
    ₹70 - 72 lakh
    23300 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Hyundai Hyundai R215 SMART X Plus
    4.5 rating
    ₹64 - 66 lakh
    21700 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Hyundai Hyundai R210 SMART X Plus
    4.5 rating
    ₹63 - 65 lakh
    21200 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Volvo Volvo EC220D
    4.5 rating
    ₹64 - 68 lakh
    21000 kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Tata Hitachi Tata Hitachi EX 215LC Prime
    4.5 rating
    ₹64 - 66 lakh
    20800 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Tata Hitachi Tata Hitachi EX 210 Infra Super+ Series
    4.5 rating
    ₹60 – 65 lakh
    20300 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    LiuGong Liugong 922Ea (Alpha)
    4.5 rating
    ₹52 - 56 lakh
    21700 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    JCB JCB NXT 215 LC Fuel Master
    4.5 rating
    ₹57 - 59 lakh
    21500 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Volvo 210 Excavator Price in India
    Volvo Volvo EC210
    4.5 rating
    ₹62 - 72 lakh
    20700 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Liebherr Liebherr R 924 Litronic
    4.5 rating
    Price Available Soon
    24950 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Liebherr Liebherr R 922 Litronic
    4.5 rating
    Price Available Soon
    22550 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Liebherr Liebherr R 920 Litronic
    4.5 rating
    Price Available Soon
    21400 Kg
    VS
    XCMG XCMG XE250C GM
    4.5 rating
    ₹76 - 80 lakh
    24500 kg
    Leeboy Leeboy 525E
    4.5 rating
    Price Available Soon
    24200 Kg

    Frequently Asked Question

    Ans.

    The Komatsu PC210-10M0 tends to suit rental fleets better because it supports a wider range of bucket sizes, so it can be set up quickly for different jobs without swapping the whole machine. This flexibility reduces downtime between rental contracts.

    Ans.

    On smaller or tighter sites, extra reach and depth matter less and can even make positioning harder. The advantage shows up most on larger foundation, drainage, or utility jobs where the machine needs to dig deep or reach far without repositioning often.

    Ans.

    Both machines use fairly standard excavator controls, so ease of learning comes down more to the driver's prior experience than the brand. A new driver should still get supervised time on either machine before working independently on a live site.

    Ans.

    The XE250C GM is the heavier machine and generally costs more to run per hour, though its fuel efficiency figures are documented by the maker for reference. Ask both dealers for expected fuel use and service intervals under similar site conditions before deciding.

    Ans.

    Both Komatsu and XCMG maintain dealer and parts networks across India, though coverage can vary by state. Confirm with your nearest dealer for both brands on parts stock and response time before you buy.

    Komatsu PC210-10M0 Vs XCMG XE250C GM - Compare Price & Availability Across 600+ Locations in India

    Compare Komatsu PC210-10M0 Vs XCMG XE250C GM price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare