Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    Komatsu PC500LC-10R VS Volvo EC480D Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Komatsu PC500LC-10RVolvo EC480D
    Komatsu PC500LC-10R VS Volvo EC480D Excavator
    Komatsu PC500LC-10R Excavator Price in India
    Komatsu PC500LC-10R

    Price Available Soon

    Volvo EC480D Excavator Price, Specs & Features in India
    Volvo EC480D

    ₹1.8 - 2.3 Crore

    Particulars Komatsu PC500LC-10R Volvo EC480D

    Komatsu PC500LC-10R vs Volvo EC480D: Which Should You Buy?

    Both machines are big and strong. They are made for hard work like mining, quarry, and large earth jobs. The tables below give you all the numbers. The real question is which one is right for your work. The Komatsu PC500LC-10R is heavier and has more digging force. It is a good choice if you break rock and dig hard ground all day. The Volvo EC480D is a little lighter and has a longer reach. It uses fuel in a careful way, which helps when the machine runs many hours each day. Many contractors like it for that reason.

    Before you buy such a big machine, think about a few simple things. Is there a service centre near your site? Can you get parts fast if the machine stops? How much fuel will it burn in a month? Will it be easy to sell after some years? For a fleet or an EPC company, these things matter more than a few extra HP. You can also see the full Komatsu excavator range and the Volvo excavator range, or read our excavator uses guide.

    Komatsu PC500LC-10R Excavator

    Pros:

    • Features a powerful Komatsu 362 HP engine.
    • High bucket digging force of 304 kN suitable for tough excavating.
    • Offers both standard GPS and optional AC cabin for operator comfort.

    Cons:

    • Less engine power compared to Volvo EC480D.
    • Slightly lower bucket capacity range of 3.5 m³ - 3.7 m³.

    Volvo EC480D Excavator

    Pros:

    • Higher engine power with Volvo 367 HP engine.
    • Larger bucket capacity range of 1.77 - 3.8 m³.
    • Comes with eco-friendly features, supporting sustainable operations.

    Cons:

    • Slightly weaker bucket digging force at 230 kN compared to Komatsu.
    • Comes with a standard AC cabin, might be costlier.

    Pros:

    Cons:

    Closing Recommendation

    Consider the Volvo EC480D for larger bucket capacity and engine power or the Komatsu PC500LC-10R for higher digging force depending on your specific project requirements.

    Komatsu PC500LC-10R Vs Volvo EC480D Excavator Price, Technical Specifications & Features

    Brand L&T Komatsu Excavator Volvo Excavator
    Type Extra-Large (>50 Ton) Large (25-50 Ton)
    Operating Cost Price Available Soon ₹1.8 - 2.3 Crore
    Price Price Available Soon ₹1.8 - 2.3 Crore
    Weight 51300Kg 47300 Kg
    Bucket 3.5 - 3.7 m³ 1.77 - 3.8 m³
    Max Digging Depth 6640 mm 7720 mm
    Engine Komatsu 362 HP Volvo 367 HP
    Warranty 1 Yr. / 3000 hr. 1 Yr. / 2000 hr.
    Boom 6670 mm 7000 mm
    Quick Overview:

    The Komatsu PC500LC-10R is a 52-ton class hydraulic excavator designed for heavy-duty mining, quarrying, and significant infrastructure projects. It offers reliable and powerful performance thanks to a Komatsu diesel engine that produces around 362 HP at 1,900 rpm. Operating at 49,400 kg to 51,300 kg, it maintains excellent stability on tough terrain, providing a solid base for high-load operations. Its large bucket capacity ranges from 3.5 m³ to 3.7 m³, with options up to 4.0 m³, enabling efficient handling of high material volumes in demanding applications. The maximum digging depth reaches up to approximately 6,640 mm, depending on boom and arm configurations, along with strong breakout forces that enhance productivity. The heavy-duty main frame, reinforced structures, and improved swing circle durability make this Komatsu excavator well-suited for harsh mining and quarry conditions. Advanced hydraulic systems combined with variable engine speed matching cut fuel consumption while maintaining fast, precise cycle times during shifts. A spacious cabin, rear-view monitoring system, and intelligent diagnostics improve operator safety, comfort, and maintenance efficiency. KOMTRAX remote monitoring further enhances machine management and reduces downtime during long operational periods. Easy maintenance access at ground level simplifies servicing and keeps the machine running smoothly. This excavator from Komatsu Construction Equipment is a powerful and reliable choice for large mining contractors and quarry operators looking for high productivity and fuel efficiency on a large scale.

    The Volvo EC480D is a 48-ton hydraulic excavator built for mining, overburden removal, and large infrastructure projects. It is powered by a 367 HP Volvo D13F engine designed to deliver high torque during demanding heavy-duty cycles. Weighing between 47,300 and 53,100 kg, the machine stays grounded across extreme terrain and high-load conditions. Its bucket capacity ranges from 1.77 to 3.8 m³, allowing it to manage large-scale bulk excavation and high-volume material movement. With a maximum digging depth of up to 9,170 mm, this Volvo excavator can easily reach deep into hard ground and rock. High breakout force of up to 230 to 250 kN ensures strong digging in tough conditions. Advanced hydraulics provide faster cycle times and smoother operations throughout every shift. It is built for maximum output per shift with lower costs per tonne across all applications. As one of the leading excavator models from Volvo, it is engineered to handle demanding mining and quarry operations efficiently. A massive fuel tank allows for long continuous shifts without refueling interruptions on demanding mining sites. It is designed for extreme durability in mining and quarry environments over extended operational periods. The Volvo 480 excavator price in India ranges from Rs. 1.8 to Rs. 2.3 crore. Backed by the proven Volvo product range, this model from Volvo Construction Equipment is an ideal choice for mining contractors and large quarry operators aiming for maximum output at lower costs per tonne.

    Agency review

    Planning to buy the Komatsu PC500LC-10R Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Volvo EC480D Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Komatsu PC500LC-10R vs Volvo EC480D: Which Should You Buy?

    Both machines are big and strong. They are made for hard work like mining, quarry, and large earth jobs. The tables below give you all the numbers. The real question is which one is right for your work. The Komatsu PC500LC-10R is heavier and has more digging force. It is a good choice if you break rock and dig hard ground all day. The Volvo EC480D is a little lighter and has a longer reach. It uses fuel in a careful way, which helps when the machine runs many hours each day. Many contractors like it for that reason.

    Before you buy such a big machine, think about a few simple things. Is there a service centre near your site? Can you get parts fast if the machine stops? How much fuel will it burn in a month? Will it be easy to sell after some years? For a fleet or an EPC company, these things matter more than a few extra HP. You can also see the full Komatsu excavator range and the Volvo excavator range, or read our excavator uses guide.

    Komatsu PC500LC-10R Excavator

    Pros:

    • Features a powerful Komatsu 362 HP engine.
    • High bucket digging force of 304 kN suitable for tough excavating.
    • Offers both standard GPS and optional AC cabin for operator comfort.

    Cons:

    • Less engine power compared to Volvo EC480D.
    • Slightly lower bucket capacity range of 3.5 m³ - 3.7 m³.

    Volvo EC480D Excavator

    Pros:

    • Higher engine power with Volvo 367 HP engine.
    • Larger bucket capacity range of 1.77 - 3.8 m³.
    • Comes with eco-friendly features, supporting sustainable operations.

    Cons:

    • Slightly weaker bucket digging force at 230 kN compared to Komatsu.
    • Comes with a standard AC cabin, might be costlier.

    Pros:

    Cons:

    Closing Recommendation

    Consider the Volvo EC480D for larger bucket capacity and engine power or the Komatsu PC500LC-10R for higher digging force depending on your specific project requirements.

    Komatsu PC500LC-10R Vs Volvo EC480D Excavator Price, Technical Specifications & Features

    Komatsu PC500LC-10R Volvo EC480D
    Brand
    L&T Komatsu Excavator Volvo Excavator
    Type
    Extra-Large (>50 Ton) Large (25-50 Ton)
    Price
    Price Available Soon ₹1.8 - 2.3 Crore
    Weight
    51300Kg 47300 Kg
    Bucket
    3.5 - 3.7 m³ 1.77 - 3.8 m³
    Max Digging Depth
    6640 mm 7720 mm
    Engine
    Komatsu 362 HP Volvo 367 HP
    Warranty
    1 Yr. / 3000 hr. 1 Yr. / 2000 hr.
    Boom
    6670 mm 7000 mm
    Quick Overview:

    The Komatsu PC500LC-10R is a 52-ton class hydraulic excavator designed for heavy-duty mining, quarrying, and significant infrastructure projects. It offers reliable and powerful performance thanks to a Komatsu diesel engine that produces around 362 HP at 1,900 rpm. Operating at 49,400 kg to 51,300 kg, it maintains excellent stability on tough terrain, providing a solid base for high-load operations. Its large bucket capacity ranges from 3.5 m³ to 3.7 m³, with options up to 4.0 m³, enabling efficient handling of high material volumes in demanding applications. The maximum digging depth reaches up to approximately 6,640 mm, depending on boom and arm configurations, along with strong breakout forces that enhance productivity. The heavy-duty main frame, reinforced structures, and improved swing circle durability make this Komatsu excavator well-suited for harsh mining and quarry conditions. Advanced hydraulic systems combined with variable engine speed matching cut fuel consumption while maintaining fast, precise cycle times during shifts. A spacious cabin, rear-view monitoring system, and intelligent diagnostics improve operator safety, comfort, and maintenance efficiency. KOMTRAX remote monitoring further enhances machine management and reduces downtime during long operational periods. Easy maintenance access at ground level simplifies servicing and keeps the machine running smoothly. This excavator from Komatsu Construction Equipment is a powerful and reliable choice for large mining contractors and quarry operators looking for high productivity and fuel efficiency on a large scale.

    The Volvo EC480D is a 48-ton hydraulic excavator built for mining, overburden removal, and large infrastructure projects. It is powered by a 367 HP Volvo D13F engine designed to deliver high torque during demanding heavy-duty cycles. Weighing between 47,300 and 53,100 kg, the machine stays grounded across extreme terrain and high-load conditions. Its bucket capacity ranges from 1.77 to 3.8 m³, allowing it to manage large-scale bulk excavation and high-volume material movement. With a maximum digging depth of up to 9,170 mm, this Volvo excavator can easily reach deep into hard ground and rock. High breakout force of up to 230 to 250 kN ensures strong digging in tough conditions. Advanced hydraulics provide faster cycle times and smoother operations throughout every shift. It is built for maximum output per shift with lower costs per tonne across all applications. As one of the leading excavator models from Volvo, it is engineered to handle demanding mining and quarry operations efficiently. A massive fuel tank allows for long continuous shifts without refueling interruptions on demanding mining sites. It is designed for extreme durability in mining and quarry environments over extended operational periods. The Volvo 480 excavator price in India ranges from Rs. 1.8 to Rs. 2.3 crore. Backed by the proven Volvo product range, this model from Volvo Construction Equipment is an ideal choice for mining contractors and large quarry operators aiming for maximum output at lower costs per tonne.

    Komatsu PC500LC-10R Vs Volvo EC480D Excavator Key Highlights

    Komatsu PC500LC-10R Volvo EC480D
    Engine Make Komatsu SAA6D125E-5 Volvo D13F
    Fuel Tank 640 L 685 L
    Engine Displacment 11.04 L 12.8 L
    Under Carriage 5385 mm 5370 mm
    Hydraulic System NA 52 L
    Arm 2400 mm 3350 mm
    Max Digging Reach 10945 mm 12040 mm
    Fuel Consumption NA NA
    Overall Width 3580 mm 3440 mm
    Overall Length 11945 mm 12140 mm
    Bucket Digging Force 304 kN 230 kN
    Tailswing Radius 3765 mm 3800 mm
    Track Shoe Width 600 mm 700 mm
    AC Cabin Optional Standard
    GPS Standard Standard

    Komatsu PC500LC-10R Vs Volvo EC480D Excavator Key Highlights

    Komatsu PC500LC-10R Volvo EC480D
    Engine Make
    Komatsu SAA6D125E-5 Volvo D13F
    Fuel Tank
    640 L 685 L
    Engine Displacment
    11.04 L 12.8 L
    Under Carriage
    5385 mm 5370 mm
    Hydraulic System
    NA 52 L
    Arm
    2400 mm 3350 mm
    Max Digging Reach
    10945 mm 12040 mm
    Fuel Consumption
    NA NA
    Overall Width
    3580 mm 3440 mm
    Overall Length
    11945 mm 12140 mm
    Bucket Digging Force
    304 kN 230 kN
    Tailswing Radius
    3765 mm 3800 mm
    Track Shoe Width
    600 mm 700 mm
    AC Cabin
    Optional Standard
    GPS
    Standard Standard

    Komatsu PC500LC-10R Vs Volvo EC480D Excavator Specifications

    Engine

    3588 3651
    Model Komatsu 362 HP Volvo 367 HP
    Fuel Diesel Diesel
    Type 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled 6 Cylinders
    Rated Engine Power 362 HP (270 kW) @ 1900 rpm 367 HP (270 kW) @ 1700 rpm
    Maximum Torque NA 1800 Nm @ 1400 rpm
    Piston Displacement 11.04 L 12.8 L
    Alternator NA 28 / 80A
    Battery NA 2 x 12V , 200 Ah
    Starting Motor NA 24V

    Undercarriage

    24V 24V
    No of Top rollers 2 2 x 2
    No of bottom rollers 8 2 x 9
    Track Shoes (Each Side) 49 2 x 50 , 2 x 52
    Track Guard NA NA
    Track Shoe width 600 mm 700 mm
    Ground bearing pressure 86.5 kPa 70.0 kPa
    Track Tensioning Grease Grease
    Gradeability 70% (35 °) 70% (35°)
    Travel Speed-Low 3.0 Km/h 3.1 Km/h
    Travel Speed-High 5.5 Km/h 5.1 Km/h
    Max Tracking Force 329 kN 330 kN

    Hydraulic System

    Komatsu PC500LC-10R Volvo EC480D
    Hydraulic pump Variable displacement piston type. 2 x variable displacement axial piston pumps
    Maximum Flow 690 L/min 2 x 358 L/min
    Pilot Pump Gear Pump Gear Pump
    Implement Circuit 37.3 MPa 32.4/35.3 MPa
    Swing Circuit 27.9 MPa 25.8 MPa
    Travel circuit 37.3 MPa 32.4 MPa
    Pilot circuit 3.2 MPa 3.9 MPa

    Hydraulic Motors

    Komatsu PC500LC-10R Volvo EC480D
    Travel 2 x axial piston motor with parking brake Variable displacement axial piston motor with mechanical brake
    Swing 1 x axial piston motor with swing holding brake Fixed displacement axial piston motor with mechanical brake

    Service Capacities

    Komatsu PC500LC-10R Volvo EC480D
    Fuel tank 640 L 685 L
    Engine Coolant 45.0 L 60 L
    Engine oil 37.0 L 42 L
    Hydraulic system NA 52 L
    Hydraulic tank 279 L 270 L

    Machine Weight

    Komatsu PC500LC-10R Volvo EC480D
    Operating Weight 51300Kg 47300 Kg

    Working Range

    Komatsu PC500LC-10R Volvo EC480D
    Boom length 6670 mm 7000 mm
    Arm length 2400 mm 3350 mm
    Max Digging Reach 10945 mm 12040 mm
    Max Digging Reach on ground 10720 mm 11810 mm
    Max digging depth 6640 mm 7720 mm
    Max digging height 10200 mm 11020 mm
    Max Dump Height 6675 mm 7640 mm
    Max vertical wallcut depth 2495 mm 7110 mm
    Min swing radius 4720 mm 5090 mm
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 304 kN 230 kN
    Arm Digging Force 262 kN 196 kN
    Swing Speed 9.1 rpm 8.8 rpm

    Dozer Blade

    Komatsu PC500LC-10R Volvo EC480D
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    Komatsu PC500LC-10R Volvo EC480D
    Bucket Capacity 3.5 - 3.7 m³ 1.77 - 3.8 m³

    Static Dimensions

    Komatsu PC500LC-10R Volvo EC480D
    Overall Length 11945 mm 12140 mm
    Overall width 3580 mm 3440 mm
    Overall Height 3980 mm 3650 mm
    Overall Height of Cab 3110 mm 3257 mm
    Upper Width 3520 mm 2990 mm
    Track Lengh on Ground 4350 mm 4370 mm
    Undercarriage overall length 5385 mm 5370 mm
    Tailswing radius 3765 mm 3800 mm
    Min Ground clearance 570 mm 550 mm
    Track gauge 2740 mm 2740 mm
    Width over tracks 3340 mm NA
    Track Height NA NA
    Counterweight Clearance 1385 mm 1275 mm
    Track Shoe Width 600 mm 700 mm

    Komatsu PC500LC-10R Vs Volvo EC480D Excavator Specifications

    Engine

    Komatsu PC500LC-10R Volvo EC480D
    Model
    Komatsu 362 HP Volvo 367 HP
    Fuel
    Diesel Diesel
    Type
    4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled 6 Cylinders
    Rated Engine Power
    362 HP (270 kW) @ 1900 rpm 367 HP (270 kW) @ 1700 rpm
    Maximum Torque
    NA 1800 Nm @ 1400 rpm
    Piston Displacement
    11.04 L 12.8 L
    Alternator
    NA 28 / 80A
    Battery
    NA 2 x 12V , 200 Ah
    Starting Motor
    NA 24V

    Undercarriage

    Komatsu PC500LC-10R Volvo EC480D
    No of Top rollers
    2 2 x 2
    No of bottom rollers
    8 2 x 9
    Track Shoes (Each Side)
    49 2 x 50 , 2 x 52
    Track Guard
    NA NA
    Track Shoe width
    600 mm 700 mm
    Ground bearing pressure
    86.5 kPa 70.0 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    70% (35 °) 70% (35°)
    Travel Speed-Low
    3.0 Km/h 3.1 Km/h
    Travel Speed-High
    5.5 Km/h 5.1 Km/h
    Max Tracking Force
    329 kN 330 kN

    Hydraulic Motors

    Komatsu PC500LC-10R Volvo EC480D
    Hydraulic pump
    Variable displacement piston type. 2 x variable displacement axial piston pumps
    Maximum Flow
    690 L/min 2 x 358 L/min
    Pilot Pump
    Gear Pump Gear Pump
    Implement Circuit
    37.3 MPa 32.4/35.3 MPa
    Swing Circuit
    27.9 MPa 25.8 MPa
    Travel circuit
    37.3 MPa 32.4 MPa
    Pilot circuit
    3.2 MPa 3.9 MPa

    Service Capacities

    Komatsu PC500LC-10R Volvo EC480D
    Fuel tank
    640 L 685 L
    Engine Coolant
    45.0 L 60 L
    Engine oil
    37.0 L 42 L
    Hydraulic system
    NA 52 L
    Hydraulic tank
    279 L 270 L

    Machine Weight

    Komatsu PC500LC-10R Volvo EC480D
    Operating Weight
    51300Kg 47300 Kg

    Working Range

    Komatsu PC500LC-10R Volvo EC480D
    Boom length
    6670 mm 7000 mm
    Arm length
    2400 mm 3350 mm
    Max Digging Reach
    10945 mm 12040 mm
    Max Digging Reach on ground
    10720 mm 11810 mm
    Max digging depth
    6640 mm 7720 mm
    Max digging height
    10200 mm 11020 mm
    Max Dump Height
    6675 mm 7640 mm
    Max vertical wallcut depth
    2495 mm 7110 mm
    Min swing radius
    4720 mm 5090 mm
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    304 kN 230 kN
    Arm Digging Force
    262 kN 196 kN
    Swing Speed
    9.1 rpm 8.8 rpm

    Dozer Blade

    Komatsu PC500LC-10R Volvo EC480D
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    Komatsu PC500LC-10R Volvo EC480D
    Bucket Capacity
    3.5 - 3.7 m³ 1.77 - 3.8 m³

    Static Dimensions

    Komatsu PC500LC-10R Volvo EC480D
    Overall Length
    11945 mm 12140 mm
    Overall width
    3580 mm 3440 mm
    Overall Height
    3980 mm 3650 mm
    Overall Height of Cab
    3110 mm 3257 mm
    Upper Width
    3520 mm 2990 mm
    Track Lengh on Ground
    4350 mm 4370 mm
    Undercarriage overall length
    5385 mm 5370 mm
    Tailswing radius
    3765 mm 3800 mm
    Min Ground clearance
    570 mm 550 mm
    Track gauge
    2740 mm 2740 mm
    Width over tracks
    3340 mm NA
    Track Height
    NA NA
    Counterweight Clearence
    1385 mm 1275 mm
    Track Shoe Width
    600 mm 700 mm

    Popular Comparisons with Komatsu PC500LC-10R

    VS
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Liebherr Liebherr R 960 SME Litronic
    4.5 rating
    Price Available Soon
    60000 Kg
    VS
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Liebherr Liebherr R 956 Litronic
    4.5 rating
    Price Available Soon
    53100 Kg
    VS
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    VS
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Volvo Volvo EC550E
    4.5 rating
    ₹2.30- 2.80 crore
    54500 Kg
    VS
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    VS
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    L&T Komatsu L&T LT-300
    4.5 rating
    Price Available Soon
    61450 Kg

    Popular Comparisons with Volvo EC480D

    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    LiuGong Liugong 939E HD
    4.5 rating
    ₹1.00 - 1.10 crore
    38400 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg

    Frequently Asked Question

    Ans.

    The Komatsu is a little easier to sell in most parts of India. Komatsu is a very well known name for big excavators, and many buyers trust it. So you can sell it and get a fair price. Volvo also sells well, mainly to big contractors and near cities. Both hold their value if you keep them in good shape and keep the service papers.

    Ans.

    The Volvo EC480D is made to save fuel, so it usually costs less to run each hour. It uses fuel in a careful way, which helps when the machine works long hours every day. The Komatsu is strong and can do more heavy digging, but it may burn a little more fuel. On a big job, even a small fuel saving each hour adds up over a month.

    Ans.

    Yes, both brands have service across India, but check your area before you buy. Komatsu and Volvo both have dealers and trained people for big machines. For a fleet or EPC company, a service centre close to the site is very important. If the machine stops on a big job, every hour of waiting costs you money. Ask both dealers how fast they can send parts and a mechanic to your site.

    Ans.

    Pick the Komatsu for hard rock, mining, and quarry work where you need more digging force. Pick the Volvo when you load trucks and dig long hours and want a longer reach with less fuel. Both machines can do most big earth jobs. The right choice depends on how hard your ground is and how many hours you run each day.

    Ans.

    Yes, it is very useful for a fleet or EPC company. On your phone or computer you can see where each machine is, how many hours it has run, and when it needs service. This helps you plan work and stop fuel theft on far sites. If you run only one machine and stay on the site yourself, you will use it less.

    Ans.

    Yes, easily. Banks, finance companies, and the dealers all give loans and lease plans for big excavators. How much you pay each month depends on your down payment and your past loan record. Many contractors take these machines on lease so they do not pay the full cost at once. Ask two or three lenders before you decide.

    Komatsu PC500LC-10R Vs Volvo EC480D - Compare Price & Availability Across 600+ Locations in India

    Compare Komatsu PC500LC-10R Vs Volvo EC480D price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare