Suno Sabki, Chuno Apni.
Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    Liebherr R 9200 G7 VS Liebherr R 9300 G8 Excavator

    Liebherr R 9200 G7
    Price Available Soon*

    Liebherr R 9200 G7

    • Weight

      205000 Kg

    • Bucket

      12.5 m³

    • Dig. Depth

      8300 mm

    • Engine

      Cummins 1086 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      8500 mm
    Extra-Large (>50 Ton)
    Liebherr R 9300 G8
    Price Available Soon*

    Liebherr R 9300 G8

    • Weight

      252000 Kg

    • Bucket

      16.5 m³

    • Dig. Depth

      8300 mm

    • Engine

      Cummins 1350 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      9000 mm
    Extra-Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Liebherr R 9200 G7Liebherr R 9300 G8
    Liebherr R 9200 G7 VS Liebherr R 9300 G8 Excavator
    Liebherr R 9200 G7 Mining Excavator | Desi Machines
    Liebherr R 9200 G7

    Price Available Soon

    Liebherr R 9300 G8 Mining Excavator on Desi Machines
    Liebherr R 9300 G8

    Price Available Soon

    Particulars Liebherr R 9200 G7 Liebherr R 9300 G8

    Liebherr R 9200 G7 vs R 9300 G8: Which Mining Excavator Fits Your Operation?

    The Liebherr R 9200 G7 and the Liebherr R 9300 G8 are both large mining excavators from the same family, built for round-the-clock high-volume digging. The R 9300 G8 is the bigger of the two, with a larger bucket, more engine power and greater digging force, and it also reaches further into the ground. The R 9200 G7 is the lighter machine, and its lower weight lets it swing a little faster between digging and dumping, which helps on cycles where speed matters as much as size.

    For a mining operator running the largest possible loads with the fewest cycles, the R 9300 G8's bigger bucket and stronger digging force move more material per pass. For an operation that values faster swing cycles and slightly easier ground pressure management, the R 9200 G7 is the machine to look at first. Browse the full Liebherr excavator range, see more excavators, or read the excavator buying guide to check where these mining excavators fit your operation.

    Liebherr R 9200 G7 Mining Excavator

    Pros:

    • Substantial engine power of 1086 HP
    • Large fuel tank capacity of 4500 L
    • Generous 12.5 m³ bucket capacity
    • Equipped with AC cabin and GPS as standard
    • Has higher swing speed of 5.0 rpm

    Cons:

    • Less bucket digging force (740 kN) compared to R 9300 G8
    • Lower operating weight of 205000 Kg
    • Slightly narrower track shoe width of 800 mm
    • Lower arm digging force (650 kN) than R 9300 G8
    • Less maximum digging reach on ground (14800 mm) compared to R 9300 G8

    Liebherr R 9300 G8 Mining Excavator

    Pros:

    • Higher engine power of 1350 HP
    • Increased bucket capacity of 16.5 m³
    • Stronger bucket digging force (885 kN) and arm digging force (810 kN)
    • Greater operating weight of 252000 Kg for enhanced stability
    • Greater maximum digging reach on ground (15600 mm)

    Cons:

    • Slightly lower swing speed of 4.0 rpm
    • Wider track shoe width may not be suitable for all conditions (850 mm)
    • Increased ground bearing pressure (206 kPa) could affect softer terrains
    • Reduced travel speed-high (2.4 Km/h) compared to R 9200 G7
    • Additional cost due to higher specifications

    Pros:

    Cons:

    Closing Recommendation

    Both these Liebherr mining excavators are built for heavy, continuous digging, so the right pick depends on how big your loads need to be. Choose the R 9300 G8 when your operation needs greater bucket capacity and more digging force for the biggest jobs. Choose the R 9200 G7 when a faster swing speed and a lighter machine fit your cycle better. So match the machine to your work: R 9200 G7 for faster cycles with a lighter build, R 9300 G8 for maximum bucket capacity and digging force.

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 Excavator Price, Technical Specifications & Features

    Brand Liebherr Excavator Liebherr Excavator
    Type Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Operating Cost Price Available Soon Price Available Soon
    Price Price Available Soon Price Available Soon
    Weight 205000 Kg 252000 Kg
    Bucket 12.5 m³ 16.5 m³
    Max Digging Depth 8300 mm 8300 mm
    Engine Cummins 1086 HP Cummins 1350 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 8500 mm 9000 mm
    Quick Overview:

    Overburden is where the Liebherr R 9200 G7 spends its life. This 205000 kg mining excavator carries a 12.5 m³ bucket, powered by a Cummins QSK38 rated 1086 HP, and digs to 8300 mm with 740 kN of bucket force. Four 512 L/min pumps feed the hydraulics.

    It is scaled for large opencast coal and iron ore mines where a machine this size does the primary loading. A 4500 L fuel tank keeps it digging between scheduled stops, the cab is air conditioned for Indian summers, and GPS is standard so planners can watch utilisation in real time.

    Newer thinking in Liebherr’s mining line, the R 9300 G8 puts 252000 kg of operating weight behind a 16.5 m³ bucket. Its Cummins QSK38 is rated 1350 HP, bucket digging force is 885 kN, and maximum digging depth is 8300 mm, with diesel and electric drive versions in the specification.

    It slots into large coal and iron ore pits as a primary loading machine for rigid dumpers. Four 512 L/min pumps give it the hydraulic capacity to hold cycle times under load, Liebherr’s factory mining support stands behind the machine, and the AC cabin and GPS are standard.
    Agency review

    Planning to buy the Liebherr R 9200 G7 Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Liebherr R 9300 G8 Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Liebherr R 9200 G7 vs R 9300 G8: Which Mining Excavator Fits Your Operation?

    The Liebherr R 9200 G7 and the Liebherr R 9300 G8 are both large mining excavators from the same family, built for round-the-clock high-volume digging. The R 9300 G8 is the bigger of the two, with a larger bucket, more engine power and greater digging force, and it also reaches further into the ground. The R 9200 G7 is the lighter machine, and its lower weight lets it swing a little faster between digging and dumping, which helps on cycles where speed matters as much as size.

    For a mining operator running the largest possible loads with the fewest cycles, the R 9300 G8's bigger bucket and stronger digging force move more material per pass. For an operation that values faster swing cycles and slightly easier ground pressure management, the R 9200 G7 is the machine to look at first. Browse the full Liebherr excavator range, see more excavators, or read the excavator buying guide to check where these mining excavators fit your operation.

    Liebherr R 9200 G7 Mining Excavator

    Pros:

    • Substantial engine power of 1086 HP
    • Large fuel tank capacity of 4500 L
    • Generous 12.5 m³ bucket capacity
    • Equipped with AC cabin and GPS as standard
    • Has higher swing speed of 5.0 rpm

    Cons:

    • Less bucket digging force (740 kN) compared to R 9300 G8
    • Lower operating weight of 205000 Kg
    • Slightly narrower track shoe width of 800 mm
    • Lower arm digging force (650 kN) than R 9300 G8
    • Less maximum digging reach on ground (14800 mm) compared to R 9300 G8

    Liebherr R 9300 G8 Mining Excavator

    Pros:

    • Higher engine power of 1350 HP
    • Increased bucket capacity of 16.5 m³
    • Stronger bucket digging force (885 kN) and arm digging force (810 kN)
    • Greater operating weight of 252000 Kg for enhanced stability
    • Greater maximum digging reach on ground (15600 mm)

    Cons:

    • Slightly lower swing speed of 4.0 rpm
    • Wider track shoe width may not be suitable for all conditions (850 mm)
    • Increased ground bearing pressure (206 kPa) could affect softer terrains
    • Reduced travel speed-high (2.4 Km/h) compared to R 9200 G7
    • Additional cost due to higher specifications

    Pros:

    Cons:

    Closing Recommendation

    Both these Liebherr mining excavators are built for heavy, continuous digging, so the right pick depends on how big your loads need to be. Choose the R 9300 G8 when your operation needs greater bucket capacity and more digging force for the biggest jobs. Choose the R 9200 G7 when a faster swing speed and a lighter machine fit your cycle better. So match the machine to your work: R 9200 G7 for faster cycles with a lighter build, R 9300 G8 for maximum bucket capacity and digging force.

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 Excavator Price, Technical Specifications & Features

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Brand
    Liebherr Excavator Liebherr Excavator
    Type
    Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Price
    Price Available Soon Price Available Soon
    Weight
    205000 Kg 252000 Kg
    Bucket
    12.5 m³ 16.5 m³
    Max Digging Depth
    8300 mm 8300 mm
    Engine
    Cummins 1086 HP Cummins 1350 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    8500 mm 9000 mm
    Quick Overview:

    Overburden is where the Liebherr R 9200 G7 spends its life. This 205000 kg mining excavator carries a 12.5 m³ bucket, powered by a Cummins QSK38 rated 1086 HP, and digs to 8300 mm with 740 kN of bucket force. Four 512 L/min pumps feed the hydraulics.

    It is scaled for large opencast coal and iron ore mines where a machine this size does the primary loading. A 4500 L fuel tank keeps it digging between scheduled stops, the cab is air conditioned for Indian summers, and GPS is standard so planners can watch utilisation in real time.

    Newer thinking in Liebherr’s mining line, the R 9300 G8 puts 252000 kg of operating weight behind a 16.5 m³ bucket. Its Cummins QSK38 is rated 1350 HP, bucket digging force is 885 kN, and maximum digging depth is 8300 mm, with diesel and electric drive versions in the specification.

    It slots into large coal and iron ore pits as a primary loading machine for rigid dumpers. Four 512 L/min pumps give it the hydraulic capacity to hold cycle times under load, Liebherr’s factory mining support stands behind the machine, and the AC cabin and GPS are standard.

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 Excavator Key Highlights

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Engine Make Cummins QSK38 Cummins QSK38
    Fuel Tank 4500 L 4500 L
    Engine Displacment 37.8 L 37.8 L
    Under Carriage 7600 mm 8060 mm
    Hydraulic System 3400 L 3400 L
    Arm 3800 mm 4000 mm
    Max Digging Reach NA NA
    Fuel Consumption NA NA
    Overall Width 7400 mm 7590 mm
    Overall Length 16700 mm 17400 mm
    Bucket Digging Force 740 kN 885 kN
    Tailswing Radius NA NA
    Track Shoe Width 800 mm 850 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 Excavator Key Highlights

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Engine Make
    Cummins QSK38 Cummins QSK38
    Fuel Tank
    4500 L 4500 L
    Engine Displacment
    37.8 L 37.8 L
    Under Carriage
    7600 mm 8060 mm
    Hydraulic System
    3400 L 3400 L
    Arm
    3800 mm 4000 mm
    Max Digging Reach
    NA NA
    Fuel Consumption
    NA NA
    Overall Width
    7400 mm 7590 mm
    Overall Length
    16700 mm 17400 mm
    Bucket Digging Force
    740 kN 885 kN
    Tailswing Radius
    NA NA
    Track Shoe Width
    800 mm 850 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 Excavator Specifications

    Engine

    3718 3720
    Model Cummins 1086 HP Cummins 1350 HP
    Fuel Diesel Diesel/Electric
    Type 12 cylinder V-engine , cooler with temperature controlled fans driven via hydraulic piston motor , turbocharged after cooled 12 cylinder V-engine , cooler with temperature controlled fans driven via hydraulic piston motor , turbocharged after cooled
    Rated Engine Power 1086 HP (810 kW) @ 1800 rpm 1350 HP (1007 kW) @ 1800 rpm
    Maximum Torque NA NA
    Piston Displacement 37.8 L 37.8 L
    Alternator 24 V / 260 A 24 V / 260 A
    Battery 4 x 180 Ah / 12 V 4 x 180 Ah / 12 V + jump start connector
    Starting Motor 24 V , 25 V 24 V

    Undercarriage

    24 V 24 V
    No of Top rollers 2 2
    No of bottom rollers 8 8
    Track Shoes (Each Side) NA NA
    Track Guard NA NA
    Track Shoe width 800 mm 850 mm
    Ground bearing pressure 194.2 kPa 206 kPa
    Track Tensioning Grease Grease
    Gradeability NA NA
    Travel Speed-Low NA NA
    Travel Speed-High 2.8 Km/h 2.4 Km/h
    Max Tracking Force NA NA

    Hydraulic System

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Hydraulic pump 4 variable flow axial piston pumps 4 variable flow axial piston pumps
    Maximum Flow 4 x 512 L/min 4 x 512 L/min.
    Pilot Pump NA NA
    Implement Circuit 35.0 MPa 35.0 MPa
    Swing Circuit NA NA
    Travel circuit NA NA
    Pilot circuit NA NA

    Hydraulic Motors

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Travel 1 axial piston motor per side frame 1 axial piston motor per side frame
    Swing 2 Liebherr axial piston motors 2 Liebherr axial piston motors

    Service Capacities

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Fuel tank 4500 L 4500 L
    Engine Coolant NA NA
    Engine oil NA NA
    Hydraulic system 3400 L 3400 L
    Hydraulic tank 1800 L 1800 L

    Machine Weight

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Operating Weight 205000 Kg 252000 Kg

    Working Range

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Boom length 8500 mm 9000 mm
    Arm length 3800 mm 4000 mm
    Max Digging Reach NA NA
    Max Digging Reach on ground 14800 mm 15600 mm
    Max digging depth 8300 mm 8300 mm
    Max digging height 14000 mm 14900 mm
    Max Dump Height 9700 mm 9900 mm
    Max vertical wallcut depth NA NA
    Min swing radius NA NA
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 740 kN 885 kN
    Arm Digging Force 650 kN 810 kN
    Swing Speed 5.0 rpm 4.0 rpm

    Dozer Blade

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Bucket Capacity 12.5 m³ 16.5 m³

    Static Dimensions

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Overall Length 16700 mm 17400 mm
    Overall width 7400 mm 7590 mm
    Overall Height 7400 mm 7450 mm
    Overall Height of Cab 7400 mm 7360 mm
    Upper Width 5400 mm 5450 mm
    Track Lengh on Ground 5862 mm 6203 mm
    Undercarriage overall length 7600 mm 8060 mm
    Tailswing radius NA NA
    Min Ground clearance 800 mm 894 mm
    Track gauge 4700 mm 5000 mm
    Width over tracks NA 6310 mm
    Track Height 2040 mm 2222 mm
    Counterweight Clearance 2175 mm 2380 mm
    Track Shoe Width 800 mm 850 mm

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 Excavator Specifications

    Engine

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Model
    Cummins 1086 HP Cummins 1350 HP
    Fuel
    Diesel Diesel/Electric
    Type
    12 cylinder V-engine , cooler with temperature controlled fans driven via hydraulic piston motor , turbocharged after cooled 12 cylinder V-engine , cooler with temperature controlled fans driven via hydraulic piston motor , turbocharged after cooled
    Rated Engine Power
    1086 HP (810 kW) @ 1800 rpm 1350 HP (1007 kW) @ 1800 rpm
    Maximum Torque
    NA NA
    Piston Displacement
    37.8 L 37.8 L
    Alternator
    24 V / 260 A 24 V / 260 A
    Battery
    4 x 180 Ah / 12 V 4 x 180 Ah / 12 V + jump start connector
    Starting Motor
    24 V , 25 V 24 V

    Undercarriage

    Liebherr R 9200 G7 Liebherr R 9300 G8
    No of Top rollers
    2 2
    No of bottom rollers
    8 8
    Track Shoes (Each Side)
    NA NA
    Track Guard
    NA NA
    Track Shoe width
    800 mm 850 mm
    Ground bearing pressure
    194.2 kPa 206 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    NA NA
    Travel Speed-Low
    NA NA
    Travel Speed-High
    2.8 Km/h 2.4 Km/h
    Max Tracking Force
    NA NA

    Hydraulic Motors

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Hydraulic pump
    4 variable flow axial piston pumps 4 variable flow axial piston pumps
    Maximum Flow
    4 x 512 L/min 4 x 512 L/min.
    Pilot Pump
    NA NA
    Implement Circuit
    35.0 MPa 35.0 MPa
    Swing Circuit
    NA NA
    Travel circuit
    NA NA
    Pilot circuit
    NA NA

    Service Capacities

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Fuel tank
    4500 L 4500 L
    Engine Coolant
    NA NA
    Engine oil
    NA NA
    Hydraulic system
    3400 L 3400 L
    Hydraulic tank
    1800 L 1800 L

    Machine Weight

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Operating Weight
    205000 Kg 252000 Kg

    Working Range

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Boom length
    8500 mm 9000 mm
    Arm length
    3800 mm 4000 mm
    Max Digging Reach
    NA NA
    Max Digging Reach on ground
    14800 mm 15600 mm
    Max digging depth
    8300 mm 8300 mm
    Max digging height
    14000 mm 14900 mm
    Max Dump Height
    9700 mm 9900 mm
    Max vertical wallcut depth
    NA NA
    Min swing radius
    NA NA
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    740 kN 885 kN
    Arm Digging Force
    650 kN 810 kN
    Swing Speed
    5.0 rpm 4.0 rpm

    Dozer Blade

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Bucket Capacity
    12.5 m³ 16.5 m³

    Static Dimensions

    Liebherr R 9200 G7 Liebherr R 9300 G8
    Overall Length
    16700 mm 17400 mm
    Overall width
    7400 mm 7590 mm
    Overall Height
    7400 mm 7450 mm
    Overall Height of Cab
    7400 mm 7360 mm
    Upper Width
    5400 mm 5450 mm
    Track Lengh on Ground
    5862 mm 6203 mm
    Undercarriage overall length
    7600 mm 8060 mm
    Tailswing radius
    NA NA
    Min Ground clearance
    800 mm 894 mm
    Track gauge
    4700 mm 5000 mm
    Width over tracks
    NA 6310 mm
    Track Height
    2040 mm 2222 mm
    Counterweight Clearence
    2175 mm 2380 mm
    Track Shoe Width
    800 mm 850 mm

    Popular Comparisons with Liebherr R 9200 G7

    VS
    Liebherr R 9200 G7 Mining Excavator | Desi Machines
    Liebherr Liebherr R 9200 G7
    4.5 rating
    Price Available Soon
    205000 Kg
    BEML BE1800D excavator
    BEML BEML BE1800D
    4.5 rating
    Price Available Soon
    175000 Kg
    Compare
    VS
    Liebherr R 9200 G7 Mining Excavator | Desi Machines
    Liebherr Liebherr R 9200 G7
    4.5 rating
    Price Available Soon
    205000 Kg
    Tata Hitachi EX 1900-6 Mining Excavator | Desi Machines
    Tata Hitachi Tata Hitachi EX 1900-6
    4.5 rating
    Price Available Soon
    191000 Kg
    Compare
    VS
    Liebherr R 9200 G7 Mining Excavator | Desi Machines
    Liebherr Liebherr R 9200 G7
    4.5 rating
    Price Available Soon
    205000 Kg
    Komatsu PC2000-8 Excavator
    L&T Komatsu Komatsu PC2000-8
    4.5 rating
    Price Available Soon
    200000 Kg
    Compare

    Popular Comparisons with Liebherr R 9300 G8

    VS
    Liebherr R 9300 G8 Mining Excavator on Desi Machines
    Liebherr Liebherr R 9300 G8
    4.5 rating
    Price Available Soon
    252000 Kg
    Liebherr R 9350 G6 Mining Excavator | Desi Machines
    Liebherr Liebherr R 9350 G6
    4.5 rating
    Price Available Soon
    302000 Kg
    Compare
    VS
    Liebherr R 9300 G8 Mining Excavator on Desi Machines
    Liebherr Liebherr R 9300 G8
    4.5 rating
    Price Available Soon
    252000 Kg
    Liebherr R 9250 G6 Mining Excavator on Desi Machines
    Liebherr Liebherr R 9250 G6
    4.5 rating
    Price Available Soon
    250000 Kg
    Compare
    VS
    Liebherr R 9300 G8 Mining Excavator on Desi Machines
    Liebherr Liebherr R 9300 G8
    4.5 rating
    Price Available Soon
    252000 Kg
    Liebherr R 9200 G7 Mining Excavator | Desi Machines
    Liebherr Liebherr R 9200 G7
    4.5 rating
    Price Available Soon
    205000 Kg
    Compare
    VS
    Liebherr R 9300 G8 Mining Excavator on Desi Machines
    Liebherr Liebherr R 9300 G8
    4.5 rating
    Price Available Soon
    252000 Kg
    Tata Hitachi EX 2600-6 Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi EX 2600-6
    4.5 rating
    Price Available Soon
    260000 Kg
    Compare
    VS
    Liebherr R 9300 G8 Mining Excavator on Desi Machines
    Liebherr Liebherr R 9300 G8
    4.5 rating
    Price Available Soon
    252000 Kg
    Komatsu PC3000-6 Excavator
    L&T Komatsu Komatsu PC3000-6
    4.5 rating
    Price Available Soon
    252000 Kg
    Compare

    Frequently Asked Question

    Ans.

    The main difference is size and power. The R 9300 G8 has a bigger bucket, more engine power and greater digging force, while the R 9200 G7 is the lighter machine of the two with a faster swing speed.

    Ans.

    The Liebherr R 9300 G8 has the bigger bucket, at 16.5 cubic metres against the R 9200 G7's 12.5 cubic metres. This lets the R 9300 G8 move more material in every single scoop.

    Ans.

    The Liebherr R 9200 G7 swings faster between digging and dumping, at 5.0 rpm against the R 9300 G8's 4.0 rpm. On cycles with a lot of turning, this speed advantage can add up across a full shift.

    Ans.

    The Liebherr R 9300 G8 digs with more force, both at the bucket and at the arm, than the R 9200 G7. This makes it better suited to harder or more compact material that needs extra push to break loose.

    Ans.

    The Liebherr R 9300 G8 is heavier and built for greater stability under bigger loads, with a higher operating weight than the R 9200 G7. Extra weight helps keep the machine steady when it is lifting or digging at full bucket capacity.

    Liebherr R 9200 G7 Vs Liebherr R 9300 G8 - Compare Price & Availability Across 600+ Locations in India

    Compare Liebherr R 9200 G7 Vs Liebherr R 9300 G8 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare