SANY SY870C-10HD vs Volvo EC750D: the two differ on 70 of 95 listed specs. The main differences are Engine (Isuzu 506 HP vs Volvo 534 HP), Price (Price Available Soon vs ₹3.5 - 4.0 crore), Operating Weight (78600 Kg vs 72700 Kg), Bucket Capacity (4.6 - 5.4 m³ vs 3.3 - 5.16 m³). The other 25 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
SANY SY870C-10HD
Volvo EC750D
SANY SY870C-10HD
VS
Volvo EC750D
Excavator
SANY SY870C-10HD vs Volvo EC750D: the two differ on 70 of 95 listed specs. The main differences are Engine (Isuzu 506 HP vs Volvo 534 HP), Price (Price Available Soon vs ₹3.5 - 4.0 crore), Operating Weight (78600 Kg vs 72700 Kg), Bucket Capacity (4.6 - 5.4 m³ vs 3.3 - 5.16 m³). The other 25 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
SANY SY870C-10HD
Price Available Soon
Volvo EC750D
₹3.5 - 4.0 crore
Particulars
SANY SY870C-10HD
Volvo EC750D
Sany SY870C-10HD vs Volvo EC750D: Which One to Buy?
Both these are extra-large excavators, built for big mining and quarry sites, not everyday construction. For a fleet or EPC company running many machines on one site, dealer reach and spare parts logistics for a machine this size matter more than a small spec difference. The Sany SY870C-10HD has a bigger fuel tank, so it needs fewer refuelling stops on remote sites far from a fuel pump. The Volvo EC750D has a shorter tail swing, so it turns in less space, which helps on benches and pits with tight working room.
If your site is remote and refuelling logistics are hard, the Sany SY870C-10HD's bigger tank keeps the machine working longer between fills. If your pit or bench is tight and turning space is limited, the Volvo EC750D's shorter swing radius makes it safer and quicker to operate. Browse the Sany excavator range, the Volvo excavator range, all excavators, or read about excavator uses on different jobs.
Volvo EC750D
Pros:
Higher engine power (534 HP) results in potentially greater productivity.
Slightly more efficient ground bearing pressure (105.9 kPa) for better maneuverability on soft grounds.
Features a shorter tailswing radius (4140 mm), potentially better for confined spaces.
Comes with a larger range of bucket capacity options.
Cons:
Less bucket digging force (325 kN) compared to the competitor.
Less warranty coverage in hours compared to Sany's model.
Slightly smaller maximum arm reach.
Sany SY870C-10HD
Pros:
Has a greater bucket digging force (432 kN), which can mean higher breakout force in tough conditions.
Larger fuel tank capacity (940 L) for extended operation times.
Greater warranty coverage in hours (1 Yr. / 2500 hr.), potentially signalling confidence in reliability.
Lower engine power (506 HP) compared to Volvo EC750D which could mean a slight compromise in overall performance.
Higher ground bearing pressure (114 kPa) might affect maneuverability in very soft conditions.
Overall width is greater, which might impede maneuverability in tight spaces.
Pros:
Cons:
Closing Recommendation
Choose the Volvo EC750D when your site needs more engine power and a wider choice of bucket sizes for different jobs. Choose the Sany SY870C-10HD when you need stronger digging force, a longer warranty and a bigger fuel tank for long shifts without refuelling. Both are extra-large excavators built for mining and quarry work, so also weigh your site's space and ground conditions before deciding. So match the machine to your work: Volvo EC750D for varied bucket needs and more power, Sany SY870C-10HD for tough digging and long, remote shifts.
SANY SY870C-10HD Vs Volvo EC750D Excavator Price, Technical Specifications & Features
The SANY SY870C-10HD is an 79-ton class mining excavator engineered for open-cast mining, bulk excavation, and high-intensity quarry operations where maximum output is required. It is powered by a Isuzu engine delivering around 506 HP, enabling consistent performance during continuous digging and loading cycles. With an operating weight of 78,600 kg, it provides strong stability across large mining zones. This SANY excavator achieves a digging depth of approximately 7,247 mm, supporting deep bench excavation tasks. A 5.4 m³ bucket improves material handling efficiency, reducing cycle time in high-volume operations. Advanced hydraulic systems ensure precise control even under full load conditions. Reinforced undercarriage and structural components enhance durability under extreme working environments. Higher output per shift improves productivity and reduces cost per tonne. This excavator from SANY Construction Equipment is best suited for mining companies and contractors handling high-capacity excavation and bulk material movement projects.
The Volvo EC750D is a 75-ton hydraulic excavator made for mining, overburden removal, and large-scale quarry work. This machine features a 534 HP Volvo D16 engine that produces high torque for demanding conditions. Weighing between 72,700 and 74,700 kg, it stands stable on rough mining terrain. The advanced Volvo excavator range, the bucket capacity ranges from 3.3 to 5.16 m³, allowing for large material movement per cycle, which boosts site productivity. It can dig down to about 7,210 mm, working well in deep excavation in hard rock and mining settings. The high breakout force of about 314 to 325 kN ensures effective digging in tough rock. It is designed for maximum output per shift and lower cost per tonne across all mining applications. A large 840-litre fuel tank allows for long operations without frequent refueling. Representing the durability of models offered by Volvo, the electro-hydraulic system offers faster cycle times and precise control during shifts. It is built for durability in mining and high-load environments over extended periods. The Volvo 750 excavator price in India ranges from Rs. 3.5 to 4.0 crore. This excavator from Volvo Construction Equipment is specifically made for large mining contractors and quarry operators who need powerful digging capability at the lowest possible cost per tonne.
Agency review
Planning to buy the SANY SY870C-10HD Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Volvo EC750D Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Sany SY870C-10HD vs Volvo EC750D: Which One to Buy?
Both these are extra-large excavators, built for big mining and quarry sites, not everyday construction. For a fleet or EPC company running many machines on one site, dealer reach and spare parts logistics for a machine this size matter more than a small spec difference. The Sany SY870C-10HD has a bigger fuel tank, so it needs fewer refuelling stops on remote sites far from a fuel pump. The Volvo EC750D has a shorter tail swing, so it turns in less space, which helps on benches and pits with tight working room.
If your site is remote and refuelling logistics are hard, the Sany SY870C-10HD's bigger tank keeps the machine working longer between fills. If your pit or bench is tight and turning space is limited, the Volvo EC750D's shorter swing radius makes it safer and quicker to operate. Browse the Sany excavator range, the Volvo excavator range, all excavators, or read about excavator uses on different jobs.
Volvo EC750D
Pros:
Higher engine power (534 HP) results in potentially greater productivity.
Slightly more efficient ground bearing pressure (105.9 kPa) for better maneuverability on soft grounds.
Features a shorter tailswing radius (4140 mm), potentially better for confined spaces.
Comes with a larger range of bucket capacity options.
Cons:
Less bucket digging force (325 kN) compared to the competitor.
Less warranty coverage in hours compared to Sany's model.
Slightly smaller maximum arm reach.
Sany SY870C-10HD
Pros:
Has a greater bucket digging force (432 kN), which can mean higher breakout force in tough conditions.
Larger fuel tank capacity (940 L) for extended operation times.
Greater warranty coverage in hours (1 Yr. / 2500 hr.), potentially signalling confidence in reliability.
Lower engine power (506 HP) compared to Volvo EC750D which could mean a slight compromise in overall performance.
Higher ground bearing pressure (114 kPa) might affect maneuverability in very soft conditions.
Overall width is greater, which might impede maneuverability in tight spaces.
Pros:
Cons:
Closing Recommendation
Choose the Volvo EC750D when your site needs more engine power and a wider choice of bucket sizes for different jobs. Choose the Sany SY870C-10HD when you need stronger digging force, a longer warranty and a bigger fuel tank for long shifts without refuelling. Both are extra-large excavators built for mining and quarry work, so also weigh your site's space and ground conditions before deciding. So match the machine to your work: Volvo EC750D for varied bucket needs and more power, Sany SY870C-10HD for tough digging and long, remote shifts.
SANY SY870C-10HD Vs Volvo EC750D Excavator Price, Technical Specifications & Features
The SANY SY870C-10HD is an 79-ton class mining excavator engineered for open-cast mining, bulk excavation, and high-intensity quarry operations where maximum output is required. It is powered by a Isuzu engine delivering around 506 HP, enabling consistent performance during continuous digging and loading cycles. With an operating weight of 78,600 kg, it provides strong stability across large mining zones. This SANY excavator achieves a digging depth of approximately 7,247 mm, supporting deep bench excavation tasks. A 5.4 m³ bucket improves material handling efficiency, reducing cycle time in high-volume operations. Advanced hydraulic systems ensure precise control even under full load conditions. Reinforced undercarriage and structural components enhance durability under extreme working environments. Higher output per shift improves productivity and reduces cost per tonne. This excavator from SANY Construction Equipment is best suited for mining companies and contractors handling high-capacity excavation and bulk material movement projects.
The Volvo EC750D is a 75-ton hydraulic excavator made for mining, overburden removal, and large-scale quarry work. This machine features a 534 HP Volvo D16 engine that produces high torque for demanding conditions. Weighing between 72,700 and 74,700 kg, it stands stable on rough mining terrain. The advanced Volvo excavator range, the bucket capacity ranges from 3.3 to 5.16 m³, allowing for large material movement per cycle, which boosts site productivity. It can dig down to about 7,210 mm, working well in deep excavation in hard rock and mining settings. The high breakout force of about 314 to 325 kN ensures effective digging in tough rock. It is designed for maximum output per shift and lower cost per tonne across all mining applications. A large 840-litre fuel tank allows for long operations without frequent refueling. Representing the durability of models offered by Volvo, the electro-hydraulic system offers faster cycle times and precise control during shifts. It is built for durability in mining and high-load environments over extended periods. The Volvo 750 excavator price in India ranges from Rs. 3.5 to 4.0 crore. This excavator from Volvo Construction Equipment is specifically made for large mining contractors and quarry operators who need powerful digging capability at the lowest possible cost per tonne.
70 differ · 25 identical
Key highlights: SANY SY870C-10HD vs Volvo EC750D Excavator
SANY SY870C-10HD
Volvo EC750D
Engine Make
Isuzu GH-6WG1X
Volvo D16E
Fuel Tank
940 L
840 L
Engine Displacment
15.68 L
16.1 L
Under Carriage
5946 mm
5990 mm
Hydraulic System
NA
655 L
Arm
2600 mm
2900 mm
Max Digging Reach
11703 mm
11460 mm
Fuel Consumption
NA
NA
Overall Width
4320 mm
4252 mm
Overall Length
13002 mm
12200 mm
Bucket Digging Force
432 kN
325 kN
Tailswing Radius
4220 mm
4140 mm
Track Shoe Width
650 mm
650 mm
AC Cabin
Standard
Standard
GPS
Standard
Standard
Key highlights: SANY SY870C-10HD vs Volvo EC750D Excavator
SANY SY870C-10HD
Volvo EC750D
Engine Make
Isuzu GH-6WG1X
Volvo D16E
Fuel Tank
940 L
840 L
Engine Displacment
15.68 L
16.1 L
Under Carriage
5946 mm
5990 mm
Hydraulic System
NA
655 L
Arm
2600 mm
2900 mm
Max Digging Reach
11703 mm
11460 mm
Fuel Consumption
NA
NA
Overall Width
4320 mm
4252 mm
Overall Length
13002 mm
12200 mm
Bucket Digging Force
432 kN
325 kN
Tailswing Radius
4220 mm
4140 mm
Track Shoe Width
650 mm
650 mm
AC Cabin
Standard
Standard
GPS
Standard
Standard
Full specifications: SANY SY870C-10HD vs Volvo EC750D Excavator
Engine
3684
3653
Model
Isuzu 506 HP
Volvo 534 HP
Fuel
Diesel
Diesel
Type
6 Cylinder ,
direct injection ,
Water Cooled
6 Cylinders
Rated Engine Power
506 HP (377 kW) @ 1800 rpm
534 HP (393 kW) @ 1800 rpm
Maximum Torque
2138 Nm @ 1500 rpm
2500 Nm @ 1340 rpm
Piston Displacement
15.68 L
16.1 L
Alternator
90A
28 / 80A
Battery
2 x 12 V
2 x 12V
,
210 Ah
Starting Motor
24 V - 5.0 kW
24V
Undercarriage
24V
24V
No of Top rollers
3
2 x 3
No of bottom rollers
8
2 x 8
Track Shoes (Each Side)
48
2 x 48
Track Guard
NA
NA
Track Shoe width
650 mm
650 mm
Ground bearing pressure
114 kPa
105.9 kPa
Track Tensioning
Grease
Grease
Gradeability
70 % (35°)
70% (35°)
Travel Speed-Low
2.9 km/h
2.9 km/h
Travel Speed-High
4.5 Km.h
4.6 Km/h
Max Tracking Force
480 kN
478 kN
Hydraulic System
SANY SY870C-10HD
Volvo EC750D
Hydraulic pump
2 Variable Displacement Axial Piston Pumps
2 x variable displacement axial piston pumps
Maximum Flow
2 x 450 L/min
2 x 450 L/min
Pilot Pump
1 Gear Pump
Gear Pump
Implement Circuit
34.3 MPa
34.3 MPa
Swing Circuit
29.4 MPa
26.5 MPa
Travel circuit
34.3 MPa
34.3 MPa
Pilot circuit
3.9 MPa
3.9 MPa
Hydraulic Motors
SANY SY870C-10HD
Volvo EC750D
Travel
Axial Piston Motor with Parking Brake
Variable displacement axial piston motor with mechanical brake
Swing
Axial Piston Motor with Swing Holding Brake
Fixed displacement axial piston motor with mechanical brake
Service Capacities
SANY SY870C-10HD
Volvo EC750D
Fuel tank
940 L
840 L
Engine Coolant
70 L
66 L
Engine oil
57 L
49 L
Hydraulic system
NA
655 L
Hydraulic tank
620 L
350 L
Machine Weight
SANY SY870C-10HD
Volvo EC750D
Operating Weight
78600 Kg
72700 Kg
Working Range
SANY SY870C-10HD
Volvo EC750D
Boom length
7000 mm
6600 mm
Arm length
2600 mm
2900 mm
Max Digging Reach
11703 mm
11460 mm
Max Digging Reach on ground
NA
11160 mm
Max digging depth
7247 mm
7210 mm
Max digging height
10910 mm
10940 mm
Max Dump Height
7047 mm
7000 mm
Max vertical wallcut depth
NA
5650 mm
Min swing radius
5586 mm
5130 mm
Max Height at Min Swing radius
9802 mm
NA
Max height (above ground)
NA
NA
Dig depth (below ground)
NA
NA
Bucket Digging Force
432 kN
325 kN
Arm Digging Force
NA
314 kN
Swing Speed
7.9 rpm
7 rpm
Dozer Blade
SANY SY870C-10HD
Volvo EC750D
Dozer Type
NA
NA
Dozer Length
NA
NA
Digging depth for ground level
NA
NA
Approach Angle
NA
NA
Width
NA
NA
Height
NA
NA
Bucket
SANY SY870C-10HD
Volvo EC750D
Bucket Capacity
4.6 - 5.4 m³
3.3 - 5.16 m³
Static Dimensions
SANY SY870C-10HD
Volvo EC750D
Overall Length
13002 mm
12200 mm
Overall width
4320 mm
4252 mm
Overall Height
4742 mm
4855 mm
Overall Height of Cab
3795 mm
3520 mm
Upper Width
3460 mm
3420 mm
Track Lengh on Ground
4770 mm
4750 mm
Undercarriage overall length
5946 mm
5990 mm
Tailswing radius
4220 mm
4140 mm
Min Ground clearance
880 mm
858 mm
Track gauge
3380 mm
3440 mm
Width over tracks
4320 mm
NA
Track Height
NA
NA
Counterweight Clearance
NA
1507 mm
Track Shoe Width
650 mm
650 mm
Full specifications: SANY SY870C-10HD vs Volvo EC750D Excavator
Questions buyers ask about the SANY SY870C-10HD vs Volvo EC750D
Ans.
The exact bucket capacity for the Sany SY870C-10HD is not listed here, so check with a dealer for current attachment options. What we do know is its bucket digging force is higher than the Volvo EC750D's, at about 432 kN versus 325 kN, meaning it breaks through hard material with more force.
Ans.
The Sany SY870C-10HD has more digging force, at about 432 kN against 325 kN for the Volvo EC750D. This makes it better suited to breaking up hard or compacted material.
Ans.
Price is not fixed for machines this size. It changes by variant, attachments, location and dealer offers. For the current number, check with an authorised dealer or ask DesiMachines for the latest quote.
Ans.
The Volvo EC750D is better for tight spaces. Its tail swing radius is shorter, so it turns without needing as much room, which helps on narrow benches or crowded pits.
Ans.
The Sany SY870C-10HD has a bigger fuel tank, at about 940 litres. This means fewer refuelling stops on long shifts or remote sites far from a fuel supply.
SANY SY870C-10HD Vs Volvo EC750D - Compare Price & Availability Across 600+ Locations in India
Compare SANY SY870C-10HD Vs Volvo EC750D price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
