Suno Sabki, Chuno Apni.
Chat with us

Taloda White Topping Tender: 16.76 km of Village Roads on NH-753BE (Rs 36.25 Cr)

Roads & Highways 📍 Maharashtra 👷 Small contractor / Machine owner / EPC
Tender Summary LIVE
Estimated value₹36.25 crore
Bid closes16 Dec 2026
Listed on DesiMachines17 Nov 2026
EMD₹36,25,000
Tender fee₹10,000
AuthorityNational Highways Authority of India, Regional Office Mumbai
PortalGovernment eProcurement System (etenders.gov.in)

NHAI is putting a concrete overlay on 16.76 km of internal village roads at Taloda and four other villages on NH-753BE for ₹36.25 crore, and the Taloda white topping tender closes at 03:00 PM on 16 December 2026.

Five villages, one concrete overlay

The regional office at Mumbai has issued reference RO/MUM/Dhule/TB/753BE/OTI/53 for white topping of the existing internal roads of Taloda, Prakasha, Vadali, Bamkheda and Varul villages, a total length of 16.76 km on NH-753BE, on EPC mode. The portal values it at ₹36,25,40,341.

White topping means laying a concrete slab over the existing bituminous road rather than digging it out. For village stretches that carry heavy vehicles and flood every monsoon, it lasts far longer than another layer of bitumen, and NHAI has been using it on short urban and village sections for exactly that reason.

EMD at one per cent, and no stated period

EMD is ₹36,25,000, one per cent of the estimate, with no exemption, and the tender fee is ₹10,000. Bids open at 04:00 PM on 17 December. The portal does not state a completion period, so that has to come from the bid document, and on a job split across five villages the programme matters: each village is a separate traffic management problem with its own diversion.

Maharashtra has other NHAI structures and road work live, including a vehicular underpass at Bhimanagar on the Pune Solapur road and balance four-laning on NH-66 at Arawali and Kante.

Concrete paving in built-up lanes

This is a paving job with an urban character. The existing surface needs profiling, then a concrete paver lays the slab, fed continuously because a cold joint in a white topping slab is a defect you will be repairing later. That means transit mixers in enough numbers to keep the paver moving and a wheel loader at the batching plant. A backhoe loader handles the side drains, the edge work and the kerbs, and an excavator deals with the utility shifting that always appears inside a village. Working through narrow village lanes means short pours, local agreement on access, and more of your cost in traffic management than the quantities suggest. The road construction equipment guide sets out the paving train in more detail.

Key facts

Tender ID 2026_NHAI_297975_1
Reference no. RO/MUM/Dhule/TB/753BE/OTI/53
Issuing authority National Highways Authority of India, Regional Office Mumbai
Location Internal roads of Taloda, Prakasha, Vadali, Bamkheda and Varul villages, 16.76 km on NH-753BE, Maharashtra (Dhule, PIN 424001)
Estimated value ₹36.25 crore (₹36,25,40,341)
EMD ₹36,25,000 (no exemption)
Tender fee ₹10,000
Form of contract EPC
Published 16 November 2026
Bids close 16 December 2026, 03:00 PM
Bid opening 17 December 2026, 04:00 PM
Completion period Not specified.
Official portal Government eProcurement System (etenders.gov.in)

How to apply

  1. Open the official portal: Government eProcurement System (etenders.gov.in).
  2. Search by tender ID 2026_NHAI_297975_1 (reference no. RO/MUM/Dhule/TB/753BE/OTI/53) under National Highways Authority of India.
  3. Register on the portal and keep a valid Class III digital signature certificate ready.
  4. Download the RFP and the village-wise schedule, confirm the completion period, then check eligibility, the ₹36,25,000 EMD and the ₹10,000 fee.
  5. Submit your bid online before 16 December 2026, 03:00 PM.

Machines for this kind of work: Road Construction: machines, models and comparisons

More on DesiMachines

Concrete paving needs mixers that keep the paver fed. Compare concrete mixers and wheel loaders, or check equipment finance. Browse more live tenders in Maharashtra or all live tenders.

FAQ

What does the Taloda white topping tender cover?

White topping of the existing internal roads of Taloda, Prakasha, Vadali, Bamkheda and Varul villages, 16.76 km in total, on NH-753BE in Maharashtra, on EPC mode.

What is white topping?

Laying a concrete slab over an existing bituminous road instead of replacing it. It lasts much longer on stretches that carry heavy vehicles or flood in the monsoon.

What is the value and the EMD?

₹36.25 crore, shown as ₹36,25,40,341. EMD is ₹36,25,000, one per cent, with no exemption, and the fee is ₹10,000.

When do bids close?

At 03:00 PM on 16 December 2026, with opening at 04:00 PM on 17 December 2026. The portal does not state the completion period.

Tender details are summarised for convenience and may change. Always verify the latest dates, terms and documents on the official tendering portal before bidding. DesiMachines is not responsible for changes made by the issuing authority.

Bidding with your own machines?Tenders often ask for machine papers such as the RC, insurance and invoice. Keep them in one private place on My Machine and get a reminder before insurance or service falls due. Free.
Open My Machine
Share this tender:

Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

!

Let's get started

Disclaimer

Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

Read the full disclaimer

Compare