BEML BG605A VS Fine FMG 985 HD Motor Grader

₹ 85-95 Lakhs^*

BEML BG605A

Engine

BEML 170.3 HP
Blade

3665 mm
Weight

15800 kg
Turning Radius

7400 mm
Max Forward Speed

44.2 km/hr
Max Reverse Speed

31.3 km/hr

Medium (12-20 Ton)

₹ 55-75 Lakhs^*

Fine FMG 985 HD

Engine

Cummins 173 HP
Blade

3660 mm
Weight

15800 kg
Turning Radius

9000 mm
Max Forward Speed

44.5 Km/h
Max Reverse Speed

30.4 km/h

Medium (12-20 Ton)

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

BEML BG605A VS Fine FMG 985 HD Motor Grader

BEML BG605A

₹ 85-95 Lakhs

Fine FMG 985 HD

₹ 55-75 Lakhs

Particulars	BEML BG605A	Fine FMG 985 HD

Overview Summary

When comparing the BEML BG605A and Fine FMG 985 HD motor graders, each machine offers unique strengths suited to different operational needs. The BEML BG605A offers a sturdy construction with a large engine capacity and blade length, while the Fine FMG 985 HD brings more power, advanced transmission, and additional operator comfort with an AC cabin.

BEML BG605A Motor Grader

Pros:

High engine displacement (11.04 L) suggests robust engine capacity.
BEML brand engine with a powerful output of 170.3 HP at lower rpm (1800).
Large blade length of 3665 mm for effective grading.
Equipped with full floating rear axle for durability.
Higher service brake system pressure (17.2 MPa) for reliable braking.
Larger fuel tank capacity (250 L) for extended operational time.
Relatively larger moldboard base (2640 mm) for stability.

Cons:

Lacks Ac cabin, which may reduce operator comfort.
GPS not available for enhanced navigation or precision work.
Slightly lower max torque (785 Nm) compared to Fine FMG 985 HD.
High minimum turning radius (7400 mm) which may affect maneuverability in tight spaces.

Fine FMG 985 HD Motor Grader

Pros:

Slightly higher engine gross power (173 HP) with more modern electronics.
More advanced transmission type with ZF automatic powershift and electronic control.
Includes an air-conditioned cabin for improved operator comfort.
Higher max torque (881 Nm) for better performance under load.
Higher maximum system pressure (22.0 MPa) for hydraulic system efficiency.
Greater fuel capacity (300 L) for less frequent refueling.
Side shift of 1524 mm allows for versatile blade positioning.

Cons:

Smaller engine displacement (6.7 L) could suggest a smaller engine size.
Lower standard warranty hours (1000 hr) compared to BEML BG605A.
Higher steering angle (45°) but larger minimum turning radius (9000 mm) indicating less agility.
Lacks moldboard thickness specification which could indicate build strength.

Closing Recommendation

The choice between the BEML BG605A and Fine FMG 985 HD should be based on specific operational requirements. If operator comfort and advanced transmission technology are high priorities, along with better torque for heavy-duty tasks, the Fine FMG 985 HD would be preferable. However, if engine robustness and blade length are more critical for your work environment, and the lack of an AC cabin is not a dealbreaker, the BEML BG605A might be the better option.