Popular Products
Popular Comparisons
Contact Us



    Your Captcha*

    captcha

    Contact Info
    Chat with us

    BEML BG825 VS Cat 14M3 Motor Grader

    BEML BG825
    ₹ 1.5-1.8 Crores*

    BEML BG825

    • Engine

      BEML 280 HP

    • Blade

      4928 mm

    • Weight

      25750 kg

    • Turning Radius

      7900 mm

    • Max Forward Speed

      44.9 km/hr

    • Max Reverse Speed

      47.9 km/hr
    Large (>50 Ton)
    Cat 14M3
    Price Available Soon*

    Cat 14M3

    • Engine

      Cat 239 HP

    • Blade

      4200 mm

    • Weight

      25968 kg

    • Turning Radius

      8100 mm

    • Max Forward Speed

      50.5 km/hr

    • Max Reverse Speed

      40 km/hr
    Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights BEML BG825Cat 14M3
    BEML BG825 VS Cat 14M3 Motor Grader
    BG825 Motor Grader
    BEML BG825

    ₹ 1.5-1.8 Crores

    CAT 14M3 Specs
    Cat 14M3

    Price Available Soon

    Particulars BEML BG825 Cat 14M3

    Overview Summary

    The BEML BG825 is known for its power and blade size, suitable for large-scale earthmoving, while the Cat 14M3 focuses on precision and advanced features with its robust engine and inbuilt AC Cabin and GPS.

    BEML BG825 Motor Grader

    Pros:

    • Offers a higher gross power of 280 HP, better for tough tasks
    • Longer blade length of 4928 mm may improve grading efficiency
    • Substantially larger fuel tank capacity of 500 L for extended operation

    Cons:

    • Turning radius is slightly less efficient at 7900 mm
    • Lacks standard features like AC Cabin and GPS

    Cat 14M3 Motor Grader

    Pros:

    • Advanced engine type with Tier 4 Final, Stage IV compliance
    • Higher forward speed and reverse speed, at 50.5 km/hr and 40 km/hr respectively
    • AC Cabin and GPS come as standard, enhancing operator comfort and precision

    Cons:

    • Lower gross power of 239 HP may affect performance under certain conditions
    • Shorter blade at 4200 mm which could impact grading scope

    Pros:

    Cons:

    Closing Recommendation

    If your requirements prioritize power and fuel capacity with a larger blade for extensive grading projects, the BEML BG825 could be the better option. However, for operations demanding high precision, advanced engine compliance, and better operator amenities, the Cat 14M3 is likely more suitable.

    BEML BG825 Vs Cat 14M3 Motor Grader Price, Technical Specifications & Features

    Brand BEML Motor grader Caterpillar Motor grader
    Type Large (>50 Ton) Large (>50 Ton)
    Price ₹ 1.5-1.8 Crores Price Available Soon
    Engine BEML 280 HP Cat 239 HP
    Weight 25750 kg 25968 kg
    Min. Turning Radius 7900 mm 8100 mm
    Max. Forward Speed 44.9 km/hr 50.5 km/hr
    Max. Reverse Speed 47.9 km/hr 40 km/hr
    Quick Overview:

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    The Cat 14M3 Motor Grader is a high-performance heavy grader in India, designed for highways, mining, and haul-road maintenance. It provides strong power, precision, and durability in demanding job conditions. Powered by a Cat C13 engine with VHP Plus technology, it generates up to 286 HP with high torque rise, ensuring consistent performance under heavy loads. The 4.3 m moldboard offers wider coverage, while electro-hydraulic controls enable accurate blade movement and better surface finishing. Advanced features like Cat Grade, Stable Blade, and Auto Articulation improve grading accuracy and reduce rework. The machine also includes a comfortable cabin with joystick controls and a digital interface for easier operation. Manufactured by Caterpillar Inc., it ensures durability and global support. It is ideal for contractors managing large infrastructure and mining projects.
    Overview Summary

    The BEML BG825 is known for its power and blade size, suitable for large-scale earthmoving, while the Cat 14M3 focuses on precision and advanced features with its robust engine and inbuilt AC Cabin and GPS.

    BEML BG825 Motor Grader

    Pros:

    • Offers a higher gross power of 280 HP, better for tough tasks
    • Longer blade length of 4928 mm may improve grading efficiency
    • Substantially larger fuel tank capacity of 500 L for extended operation

    Cons:

    • Turning radius is slightly less efficient at 7900 mm
    • Lacks standard features like AC Cabin and GPS

    Cat 14M3 Motor Grader

    Pros:

    • Advanced engine type with Tier 4 Final, Stage IV compliance
    • Higher forward speed and reverse speed, at 50.5 km/hr and 40 km/hr respectively
    • AC Cabin and GPS come as standard, enhancing operator comfort and precision

    Cons:

    • Lower gross power of 239 HP may affect performance under certain conditions
    • Shorter blade at 4200 mm which could impact grading scope

    Pros:

    Cons:

    Closing Recommendation

    If your requirements prioritize power and fuel capacity with a larger blade for extensive grading projects, the BEML BG825 could be the better option. However, for operations demanding high precision, advanced engine compliance, and better operator amenities, the Cat 14M3 is likely more suitable.

    BEML BG825 Vs Cat 14M3 Motor Grader Price, Technical Specifications & Features

    BEML BG825 Cat 14M3
    Brand
    BEML Motor grader Caterpillar Motor grader
    Type
    Large (>50 Ton) Large (>50 Ton)
    Price
    ₹ 1.5-1.8 Crores Price Available Soon
    Engine
    BEML 280 HP Cat 239 HP
    Weight
    25750 kg 25968 kg
    Min. Turning Radius
    7900 mm 8100 mm
    Max. Forward Speed
    44.9 km/hr 50.5 km/hr
    Max. Reverse Speed
    47.9 km/hr 40 km/hr
    Quick Overview:

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    The Cat 14M3 Motor Grader is a high-performance heavy grader in India, designed for highways, mining, and haul-road maintenance. It provides strong power, precision, and durability in demanding job conditions. Powered by a Cat C13 engine with VHP Plus technology, it generates up to 286 HP with high torque rise, ensuring consistent performance under heavy loads. The 4.3 m moldboard offers wider coverage, while electro-hydraulic controls enable accurate blade movement and better surface finishing. Advanced features like Cat Grade, Stable Blade, and Auto Articulation improve grading accuracy and reduce rework. The machine also includes a comfortable cabin with joystick controls and a digital interface for easier operation. Manufactured by Caterpillar Inc., it ensures durability and global support. It is ideal for contractors managing large infrastructure and mining projects.

    BEML BG825 Vs Cat 14M3 Motor Grader Key Highlights

    BEML BG825 Cat 14M3
    Engine Make BEML BS6140 Cat C13 ACERT VHP
    Max Torque NA 1542 Nm
    Fuel Tank 500 L NA
    Hydraulic System 105 L NA
    Tires 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 20.5 R25
    Frame Height 400 mm NA
    Max Lift Above Ground 490 mm 419 mm
    Max Cutting Depth 680 mm 438 mm
    Blade Pitch Angle 49° forward; 5° backward 40° forward; 5° backward
    Wheel Base 7100 mm NA
    Overall Length 11470 mm NA
    Overall Height 3750 mm NA
    Warranty 1 Yr. / 2500 hr. 1 Year
    AC Cabin Not Available Standard
    GPS Not Available Standard

    BEML BG825 Vs Cat 14M3 Motor Grader Key Highlights

    BEML BG825 Cat 14M3
    Engine Make
    BEML BS6140 Cat C13 ACERT VHP
    Max Torque
    NA 1542 Nm
    Fuel Tank
    500 L NA
    Hydraulic System
    105 L NA
    Tires
    18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 20.5 R25
    Frame Height
    400 mm NA
    Max Lift Above Ground
    490 mm 419 mm
    Max Cutting Depth
    680 mm 438 mm
    Blade Pitch Angle
    49° forward; 5° backward 40° forward; 5° backward
    Wheel Base
    7100 mm NA
    Overall Length
    11470 mm NA
    Overall Height
    3750 mm NA
    Warranty
    1 Yr. / 2500 hr. 1 Year
    AC Cabin
    Not Available Standard
    GPS
    Not Available Standard

    BEML BG825 Vs Cat 14M3 Motor Grader Specifications

    Engine

    BEML BG825 Cat 14M3
    Model BEML 280 HP Cat 239 HP
    Fuel Diesel Diesel
    Type 4 stroke; water-cooled Tier 4 Final; Stage IV; Tier 3 / Stage IIIA equivalent or TIER 2 / Stage II Equivalent
    Gross Power 280 HP (209 kW) @ 2100 rpm 239 HP (178 kW) @ 1850 rpm
    Number Of Cylinders 6 inline 6
    Max Torque NA 1542 Nm
    Displacement 15.24 L 12.5 L
    Battery 2 x 12 V / 200 Ah maintenance free batteries NA
    Alternator 24V / 45A NA

    Transmission

    BEML BG825 Cat 14M3
    Type BEML - Hydro Shift Transmission Powershift transmission

    Speed

    BEML BG825 Cat 14M3
    Max. Forward Speed 44.9 km/hr 50.5 km/hr
    Max. Reverse Speed 47.9 km/hr 40 km/hr

    Axles

    BEML BG825 Cat 14M3
    Rear Axle Full-flotaing rear is made of forged heat treated steel NA
    Front Axle Reverse Elliot-type NA

    Tyres

    BEML BG825 Cat 14M3
    Size 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 20.5 R25

    Steering

    BEML BG825 Cat 14M3
    Type Orbitrol; full hydraulic steering system NA
    Minimum Turning Radius 7900 mm 8100 mm
    Steering-Angle 50° NA

    Brakes

    BEML BG825 Cat 14M3
    Service Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking. NA
    Parking Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested. NA

    Frame

    BEML BG825 Cat 14M3
    Front Frame Height 400 mm NA
    Front Frame Width 350 mm NA
    Front Frame Thickness NA NA

    MoldBoard

    BEML BG825 Cat 14M3
    Type Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached. NA
    Blade Length 4928 mm 4200 mm
    Blade Height 800 mm 631 mm
    Blade Thickness 25 mm NA
    Cutting Edge 203 x 19 mm NA
    Blade Pull NA NA
    Blade Down Pressure NA NA
    Moldboard Side Shift (Right/Left) NA 790 mm / 740 mm
    Maximum Shoulder Reach (Right/Left) 2400 mm / 2400 mm 2004 mm / 1870 mm
    Maximum Lift Above Ground 490 mm 419 mm
    Maximum Cutting Depth 680 mm 438 mm
    Blade Pitch Angle 49° forward; 5° backward 40° forward; 5° backward

    Hydraulics

    BEML BG825 Cat 14M3
    Type Three gear pump (tandem) type NA
    Maximum Pump Flow 268 L/min NA
    Maximum System Pressure 20.6 MPa NA

    Service Capacities

    BEML BG825 Cat 14M3
    Fuel Tank 500 L NA
    Cooling System 58 L NA
    Engine Oil 38 L NA
    DEF Tank NA NA
    Trasnsmission Oil 25 L NA
    Final Drive 34 L NA
    Hydraulic System 105 L NA
    Circle Reverse Housing NA NA

    Weight

    BEML BG825 Cat 14M3
    Gross Vehicle Weight 25750 kg 25968 kg
    Moldboard Base 3100 mm NA
    Wheelbase 7100 mm NA
    Tandem Wheelbase 1840 mm NA
    Width of Standard Moldboard 4928 mm NA
    Overall Length 11470 mm NA
    Tread Gauge 2460 mm NA
    Width of Tires 3050 mm NA
    Articulation, left or right 25° NA
    Minimum Ground Clearence 680 mm NA

    BEML BG825 Vs Cat 14M3 Motor Grader Specifications

    Engine

    BEML BG825 Cat 14M3
    Model
    BEML 280 HP Cat 239 HP
    Fuel
    Diesel Diesel
    Type
    4 stroke; water-cooled Tier 4 Final; Stage IV; Tier 3 / Stage IIIA equivalent or TIER 2 / Stage II Equivalent
    Gross Power
    280 HP (209 kW) @ 2100 rpm 239 HP (178 kW) @ 1850 rpm
    Number Of Cylinders
    6 inline 6
    Max Torque
    NA 1542 Nm
    Displacement
    15.24 L 12.5 L
    Battery
    2 x 12 V / 200 Ah maintenance free batteries NA
    Alternator
    24V / 45A NA

    Speed

    BEML BG825 Cat 14M3
    Max. Forward Speed
    44.9 km/hr 50.5 km/hr
    Max. Reverse Speed
    47.9 km/hr 40 km/hr

    Axles

    BEML BG825 Cat 14M3
    Rear Axle
    Full-flotaing rear is made of forged heat treated steel NA
    Front Axle
    Reverse Elliot-type NA

    Tyres

    BEML BG825 Cat 14M3
    Size
    18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 20.5 R25

    Steering

    BEML BG825 Cat 14M3
    Type
    Orbitrol; full hydraulic steering system NA
    Minimum Turning Radius
    7900 mm 8100 mm
    Steering-Angle
    50° NA

    Brakes

    BEML BG825 Cat 14M3
    Service
    Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking. NA
    Parking
    Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested. NA

    Frame

    BEML BG825 Cat 14M3
    Front Frame Height
    400 mm NA
    Front Frame Width
    350 mm NA
    Front Frame Thickness
    NA NA

    Moldboard

    BEML BG825 Cat 14M3
    Type
    Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached. NA
    Blade Length
    4928 mm 4200 mm
    Blade Height
    800 mm 631 mm
    Blade Thickness
    25 mm NA
    Cutting Edge
    203 x 19 mm NA
    Blade Pull
    NA NA
    Blade Down Pressure
    NA NA
    Moldboard Side Shift (Right/Left)
    NA 790 mm / 740 mm
    Maximum Shoulder Reach (Right/Left)
    2400 mm / 2400 mm 2004 mm / 1870 mm
    Maximum Lift Above Ground
    490 mm 419 mm
    Maximum Cutting Depth
    680 mm 438 mm
    Blade Pitch Angle
    49° forward; 5° backward 40° forward; 5° backward

    Hydraulics

    BEML BG825 Cat 14M3
    Type
    Three gear pump (tandem) type NA
    Maximum Pump Flow
    268 L/min NA
    Maximum System Pressure
    20.6 MPa NA

    Service Capacities

    BEML BG825 Cat 14M3
    Fuel Tank
    500 L NA
    Cooling System
    58 L NA
    Engine Oil
    38 L NA
    DEF Tank
    NA NA
    Trasnsmission Oil
    25 L NA
    Final Drive
    34 L NA
    Hydraulic System
    105 L NA
    Circle Reverse Housing
    NA NA

    Weight

    BEML BG825 Cat 14M3
    Gross Vehicle Weight
    25750 kg 25968 kg
    Moldboard Base
    3100 mm NA
    Wheelbase
    7100 mm NA
    Tandem Wheelbase
    1840 mm NA
    Width of Standard Moldboard
    4928 mm NA
    Overall Length
    11470 mm NA
    Tread Gauge
    2460 mm NA
    Width of Tires
    3050 mm NA
    Articulation, left or right
    25° NA
    Minimum Ground Clearence
    680 mm NA

    Popular Comparisons with BEML BG825

    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Popular Comparisons with Cat 14M3

    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    BEML BG825 Vs Cat 14M3 - Compare Price & Availability Across 600+ Locations in India

    Compare BEML BG825 Vs Cat 14M3 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare