Popular Products
Popular Comparisons
Contact Us



    Your Captcha*

    captcha

    Contact Info
    Chat with us

    Cat 16M3 VS Cat 24M Motor Grader

    Cat 16M3
    Price Available Soon*

    Cat 16M3

    • Engine

      Cat 290 HP

    • Blade

      4900 mm

    • Weight

      32411 kg

    • Turning Radius

      9300 mm

    • Max Forward Speed

      51.7 km/hr

    • Max Reverse Speed

      40.8 km/hr
    Large (>50 Ton)
    Cat 24M
    Price Available Soon*

    Cat 24M

    • Engine

      Cat 533 HP

    • Blade

      7300 mm

    • Weight

      65840 kg

    • Turning Radius

      12400 mm

    • Max Forward Speed

      43.4 km/hr

    • Max Reverse Speed

      41.6 km/hr
    Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Cat 16M3Cat 24M
    Cat 16M3 VS Cat 24M Motor Grader
    16M3 Motor Grader
    Cat 16M3

    Price Available Soon

    CAT 24 Grader Price
    Cat 24M

    Price Available Soon

    Particulars Cat 16M3 Cat 24M

    Cat 16M3 vs Cat 24M Motor Grader: Which One Should You Buy?

    These are two very different machines. The tables below give you all the numbers. The real question is which one fits your work. The Cat 16M3 is a mid-size grader. It is a good choice for road work, site levelling and general contractor jobs. It moves fast and turns easily, so it gets more done on normal sites. The Cat 24M is a very big machine. It has almost double the power and a much wider blade. It is made for mines, big dams and large EPC jobs where you move huge amounts of earth every day. On a small job the 24M is too big and costs too much to run.

    Before you buy, think about a few simple things. What kind of work will the machine do most days? Is there a Cat dealer near you for parts and service? Will you keep the machine busy enough to earn back the running cost? You can see the full range on our motor grader page and learn more brands in our construction equipment brands guide.

    Cat 16M3 Motor Grader

    Pros:

    • Higher forward speed of 51.7 km/hr.
    • Equipped with GPS and AC Cabin as standard.
    • Advanced engine model Cat C13 ACERT VHP with a gross power of 290 HP.

    Cons:

    • Lower blade pull than Cat 24M with 23985 kgf.
    • Shorter blade length compared to Cat 24M at 4900 mm.
    • Less maximum cutting depth of 470 mm.

    Cat 24M Motor Grader

    Pros:

    • Powerful engine with 533 HP and higher torque of 2173 Nm.
    • Longer blade length of 7300 mm increases work efficiency.
    • Substantial blade down pressure and pull for heavy-duty tasks.

    Cons:

    • Lower maximum forward speed of 43.4 km/hr.
    • Larger minimum turning radius may affect maneuverability in tight spaces.
    • A larger machine which may require more operational space.

    Pros:

    Cons:

    Closing Recommendation

    Pick the machine that matches your daily work. The Cat 16M3 is a mid-size grader that moves fast and turns easily, so it suits road work, site levelling and general contractor jobs. The Cat 24M is a very big machine with more power and a wider blade, made for mines, big dams and large EPC jobs where you move a lot of earth every day; for either one, check that a Cat dealer is close for parts and service and that you can find a driver used to that size. So match the machine to your work: Cat 16M3 for road and site jobs, Cat 24M for mines and heavy earthmoving.

    Cat 16M3 Vs Cat 24M Motor Grader Price, Technical Specifications & Features

    Brand Caterpillar Motor grader Caterpillar Motor grader
    Type Large (>50 Ton) Large (>50 Ton)
    Price Price Available Soon Price Available Soon
    Engine Cat 290 HP Cat 533 HP
    Weight 32411 kg 65840 kg
    Min. Turning Radius 9300 mm 12400 mm
    Max. Forward Speed 51.7 km/hr 43.4 km/hr
    Max. Reverse Speed 40.8 km/hr 41.6 km/hr
    Quick Overview:

    The Cat 16M3 Motor Grader is a high-capacity mining-class grader designed for haul roads, large infrastructure, and heavy earthmoving work. It delivers strong performance, precision, and durability in challenging environments. Powered by a Cat C13 engine with variable horsepower, this grader machine produces 290 HP depending on gear selection. This provides efficient power delivery, high torque, and better fuel management across various applications. The machine has an operating weight of 32 tons and a 4.9 m moldboard, offering high stability and wider coverage. It reduces the number of passes and improves grading efficiency in mining operations. Its electro-hydraulic load-sensing system ensures precise blade control, while the direct drive powershift transmission (8F+6R) ensures smooth operation. Strong blade pull and downforce enhance cutting performance in hard materials. Manufactured by Caterpillar Inc., it guarantees durability and uptime, making it ideal for large mining and infrastructure projects.

    The Cat 24 Motor Grader is a heavy-duty grader designed for large haul roads and high-production mining operations. It aims to deliver maximum productivity, durability, and precision in tough working conditions. Powered by a Cat C27 engine, it generates up to 533 HP, providing exceptional power, high torque, and consistent performance under extreme loads. The grader machine has a large 7.3 m (24 ft) moldboard, which allows for wide coverage and faster grading with fewer passes. With an operating weight of over 65 tons, it offers great stability and traction. The electro-hydraulic system ensures precise blade control, while the powershift transmission allows for smooth and efficient operation. Manufactured by Caterpillar Inc., it promises long-term reliability and global support. This grader machine is suitable for large-scale mining and haul-road maintenance projects that require maximum output and uptime.

    Cat 16M3 vs Cat 24M Motor Grader: Which One Should You Buy?

    These are two very different machines. The tables below give you all the numbers. The real question is which one fits your work. The Cat 16M3 is a mid-size grader. It is a good choice for road work, site levelling and general contractor jobs. It moves fast and turns easily, so it gets more done on normal sites. The Cat 24M is a very big machine. It has almost double the power and a much wider blade. It is made for mines, big dams and large EPC jobs where you move huge amounts of earth every day. On a small job the 24M is too big and costs too much to run.

    Before you buy, think about a few simple things. What kind of work will the machine do most days? Is there a Cat dealer near you for parts and service? Will you keep the machine busy enough to earn back the running cost? You can see the full range on our motor grader page and learn more brands in our construction equipment brands guide.

    Cat 16M3 Motor Grader

    Pros:

    • Higher forward speed of 51.7 km/hr.
    • Equipped with GPS and AC Cabin as standard.
    • Advanced engine model Cat C13 ACERT VHP with a gross power of 290 HP.

    Cons:

    • Lower blade pull than Cat 24M with 23985 kgf.
    • Shorter blade length compared to Cat 24M at 4900 mm.
    • Less maximum cutting depth of 470 mm.

    Cat 24M Motor Grader

    Pros:

    • Powerful engine with 533 HP and higher torque of 2173 Nm.
    • Longer blade length of 7300 mm increases work efficiency.
    • Substantial blade down pressure and pull for heavy-duty tasks.

    Cons:

    • Lower maximum forward speed of 43.4 km/hr.
    • Larger minimum turning radius may affect maneuverability in tight spaces.
    • A larger machine which may require more operational space.

    Pros:

    Cons:

    Closing Recommendation

    Pick the machine that matches your daily work. The Cat 16M3 is a mid-size grader that moves fast and turns easily, so it suits road work, site levelling and general contractor jobs. The Cat 24M is a very big machine with more power and a wider blade, made for mines, big dams and large EPC jobs where you move a lot of earth every day; for either one, check that a Cat dealer is close for parts and service and that you can find a driver used to that size. So match the machine to your work: Cat 16M3 for road and site jobs, Cat 24M for mines and heavy earthmoving.

    Cat 16M3 Vs Cat 24M Motor Grader Price, Technical Specifications & Features

    Cat 16M3 Cat 24M
    Brand
    Caterpillar Motor grader Caterpillar Motor grader
    Type
    Large (>50 Ton) Large (>50 Ton)
    Price
    Price Available Soon Price Available Soon
    Engine
    Cat 290 HP Cat 533 HP
    Weight
    32411 kg 65840 kg
    Min. Turning Radius
    9300 mm 12400 mm
    Max. Forward Speed
    51.7 km/hr 43.4 km/hr
    Max. Reverse Speed
    40.8 km/hr 41.6 km/hr
    Quick Overview:

    The Cat 16M3 Motor Grader is a high-capacity mining-class grader designed for haul roads, large infrastructure, and heavy earthmoving work. It delivers strong performance, precision, and durability in challenging environments. Powered by a Cat C13 engine with variable horsepower, this grader machine produces 290 HP depending on gear selection. This provides efficient power delivery, high torque, and better fuel management across various applications. The machine has an operating weight of 32 tons and a 4.9 m moldboard, offering high stability and wider coverage. It reduces the number of passes and improves grading efficiency in mining operations. Its electro-hydraulic load-sensing system ensures precise blade control, while the direct drive powershift transmission (8F+6R) ensures smooth operation. Strong blade pull and downforce enhance cutting performance in hard materials. Manufactured by Caterpillar Inc., it guarantees durability and uptime, making it ideal for large mining and infrastructure projects.

    The Cat 24 Motor Grader is a heavy-duty grader designed for large haul roads and high-production mining operations. It aims to deliver maximum productivity, durability, and precision in tough working conditions. Powered by a Cat C27 engine, it generates up to 533 HP, providing exceptional power, high torque, and consistent performance under extreme loads. The grader machine has a large 7.3 m (24 ft) moldboard, which allows for wide coverage and faster grading with fewer passes. With an operating weight of over 65 tons, it offers great stability and traction. The electro-hydraulic system ensures precise blade control, while the powershift transmission allows for smooth and efficient operation. Manufactured by Caterpillar Inc., it promises long-term reliability and global support. This grader machine is suitable for large-scale mining and haul-road maintenance projects that require maximum output and uptime.

    Cat 16M3 Vs Cat 24M Motor Grader Key Highlights

    Cat 16M3 Cat 24M
    Engine Make Cat C13 ACERT VHP Cat 18 ACERT
    Max Torque 1771 Nm 2173 Nm
    Fuel Tank 496 L 1326 L
    Hydraulic System 146 L 264 L
    Tires 19.5 x 25 MP -23.5R25 NA
    Frame Height 460 mm NA
    Max Lift Above Ground 400 mm 634 mm
    Max Cutting Depth 470 mm 657 mm
    Blade Pitch Angle 40° forward; 5° backward 40° forward; 0° backward
    Wheel Base 7365 mm NA
    Overall Length 12051 mm NA
    Overall Height 3719 mm NA
    Warranty 1 Year 1 Year
    AC Cabin Standard Standard
    GPS Standard Standard

    Cat 16M3 Vs Cat 24M Motor Grader Key Highlights

    Cat 16M3 Cat 24M
    Engine Make
    Cat C13 ACERT VHP Cat 18 ACERT
    Max Torque
    1771 Nm 2173 Nm
    Fuel Tank
    496 L 1326 L
    Hydraulic System
    146 L 264 L
    Tires
    19.5 x 25 MP -23.5R25 NA
    Frame Height
    460 mm NA
    Max Lift Above Ground
    400 mm 634 mm
    Max Cutting Depth
    470 mm 657 mm
    Blade Pitch Angle
    40° forward; 5° backward 40° forward; 0° backward
    Wheel Base
    7365 mm NA
    Overall Length
    12051 mm NA
    Overall Height
    3719 mm NA
    Warranty
    1 Year 1 Year
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    Cat 16M3 Vs Cat 24M Motor Grader Specifications

    Engine

    Cat 16M3 Cat 24M
    Model Cat 290 HP Cat 533 HP
    Fuel Diesel Diesel
    Type US EPA Tier 4 Final / EU Stage IV / Japan 2014 ( Tier 4 Final) NA
    Gross Power 290 HP (216 kW) @ 2000 rpm 533 HP (397 kW) @ 1800 rpm
    Number Of Cylinders 6 6
    Max Torque 1771 Nm 2173 Nm
    Displacement 12.5 L 18.L
    Battery NA NA
    Alternator NA NA

    Transmission

    Cat 16M3 Cat 24M
    Type Direct drive; power shift; countershaft Automatic; electronic Powershift Transmission

    Speed

    Cat 16M3 Cat 24M
    Max. Forward Speed 51.7 km/hr 43.4 km/hr
    Max. Reverse Speed 40.8 km/hr 41.6 km/hr

    Axles

    Cat 16M3 Cat 24M
    Rear Axle NA NA
    Front Axle NA NA

    Tyres

    Cat 16M3 Cat 24M
    Size 19.5 x 25 MP -23.5R25 NA

    Steering

    Cat 16M3 Cat 24M
    Type NA NA
    Minimum Turning Radius 9300 mm 12400 mm
    Steering-Angle 47.5° 47.5°

    Brakes

    Cat 16M3 Cat 24M
    Service Oil-actuated; oil disc Oil-actuated; oil disc
    Parking Spring Applied; hydraulically released. Spring Applied; hydraulically released.

    Frame

    Cat 16M3 Cat 24M
    Front Frame Height 460 mm NA
    Front Frame Width 356 mm NA
    Front Frame Thickness 14 mm NA

    MoldBoard

    Cat 16M3 Cat 24M
    Type NA NA
    Blade Length 4900 mm 7300 mm
    Blade Height NA NA
    Blade Thickness 25 mm 50 mm
    Cutting Edge 203 x 25 mm 330 x 29 mm
    Blade Pull 23985 kgf 43518 kgf
    Blade Down Pressure 19895 kgf 34316 kgf
    Moldboard Side Shift (Right/Left) 790 mm / 740 mm 4902 mm / 4528 mm
    Maximum Shoulder Reach (Right/Left) 2311 mm / 2311 mm 3228 mm / 3222 mm
    Maximum Lift Above Ground 400 mm 634 mm
    Maximum Cutting Depth 470 mm 657 mm
    Blade Pitch Angle 40° forward; 5° backward 40° forward; 0° backward

    Hydraulics

    Cat 16M3 Cat 24M
    Type Electro-hydraulic load sensing; closed center; Variable Piston Electro-hydraulic load sensing; closed center; Variable Piston
    Maximum Pump Flow 280 L/min 550 L/min
    Maximum System Pressure 24.75 MPa 21.1 MPa

    Service Capacities

    Cat 16M3 Cat 24M
    Fuel Tank 496 L 1326 L
    Cooling System 70 L 90 L
    Engine Oil 36 L 60 L
    DEF Tank 16 L NA
    Trasnsmission Oil 98.5 L 87.1 L
    Final Drive NA NA
    Hydraulic System 146 L 264 L
    Circle Reverse Housing 10 L 7.5 L

    Weight

    Cat 16M3 Cat 24M
    Gross Vehicle Weight 32411 kg 65840 kg
    Moldboard Base 3066 mm NA
    Wheelbase 7365 mm NA
    Tandem Wheelbase 1841 mm NA
    Width of Standard Moldboard 4900 mm 7300 mm
    Overall Length 12051 mm NA
    Tread Gauge 2703 mm NA
    Width of Tires 3411 mm NA
    Articulation, left or right NA 25°
    Minimum Ground Clearence 396 mm NA

    Cat 16M3 Vs Cat 24M Motor Grader Specifications

    Engine

    Cat 16M3 Cat 24M
    Model
    Cat 290 HP Cat 533 HP
    Fuel
    Diesel Diesel
    Type
    US EPA Tier 4 Final / EU Stage IV / Japan 2014 ( Tier 4 Final) NA
    Gross Power
    290 HP (216 kW) @ 2000 rpm 533 HP (397 kW) @ 1800 rpm
    Number Of Cylinders
    6 6
    Max Torque
    1771 Nm 2173 Nm
    Displacement
    12.5 L 18.L
    Battery
    NA NA
    Alternator
    NA NA

    Speed

    Cat 16M3 Cat 24M
    Max. Forward Speed
    51.7 km/hr 43.4 km/hr
    Max. Reverse Speed
    40.8 km/hr 41.6 km/hr

    Axles

    Cat 16M3 Cat 24M
    Rear Axle
    NA NA
    Front Axle
    NA NA

    Tyres

    Cat 16M3 Cat 24M
    Size
    19.5 x 25 MP -23.5R25 NA

    Steering

    Cat 16M3 Cat 24M
    Type
    NA NA
    Minimum Turning Radius
    9300 mm 12400 mm
    Steering-Angle
    47.5° 47.5°

    Brakes

    Cat 16M3 Cat 24M
    Service
    Oil-actuated; oil disc Oil-actuated; oil disc
    Parking
    Spring Applied; hydraulically released. Spring Applied; hydraulically released.

    Frame

    Cat 16M3 Cat 24M
    Front Frame Height
    460 mm NA
    Front Frame Width
    356 mm NA
    Front Frame Thickness
    14 mm NA

    Moldboard

    Cat 16M3 Cat 24M
    Type
    NA NA
    Blade Length
    4900 mm 7300 mm
    Blade Height
    NA NA
    Blade Thickness
    25 mm 50 mm
    Cutting Edge
    203 x 25 mm 330 x 29 mm
    Blade Pull
    23985 kgf 43518 kgf
    Blade Down Pressure
    19895 kgf 34316 kgf
    Moldboard Side Shift (Right/Left)
    790 mm / 740 mm 4902 mm / 4528 mm
    Maximum Shoulder Reach (Right/Left)
    2311 mm / 2311 mm 3228 mm / 3222 mm
    Maximum Lift Above Ground
    400 mm 634 mm
    Maximum Cutting Depth
    470 mm 657 mm
    Blade Pitch Angle
    40° forward; 5° backward 40° forward; 0° backward

    Hydraulics

    Cat 16M3 Cat 24M
    Type
    Electro-hydraulic load sensing; closed center; Variable Piston Electro-hydraulic load sensing; closed center; Variable Piston
    Maximum Pump Flow
    280 L/min 550 L/min
    Maximum System Pressure
    24.75 MPa 21.1 MPa

    Service Capacities

    Cat 16M3 Cat 24M
    Fuel Tank
    496 L 1326 L
    Cooling System
    70 L 90 L
    Engine Oil
    36 L 60 L
    DEF Tank
    16 L NA
    Trasnsmission Oil
    98.5 L 87.1 L
    Final Drive
    NA NA
    Hydraulic System
    146 L 264 L
    Circle Reverse Housing
    10 L 7.5 L

    Weight

    Cat 16M3 Cat 24M
    Gross Vehicle Weight
    32411 kg 65840 kg
    Moldboard Base
    3066 mm NA
    Wheelbase
    7365 mm NA
    Tandem Wheelbase
    1841 mm NA
    Width of Standard Moldboard
    4900 mm 7300 mm
    Overall Length
    12051 mm NA
    Tread Gauge
    2703 mm NA
    Width of Tires
    3411 mm NA
    Articulation, left or right
    NA 25°
    Minimum Ground Clearence
    396 mm NA

    Popular Comparisons with Cat 16M3

    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Popular Comparisons with Cat 24M

    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Frequently Asked Question

    Ans.

    The Cat 16M3 suits roads, site levelling and general contractor jobs. It is fast and easy to move around a normal site. The Cat 24M suits mines, big dams and large EPC earthwork. It has more power and a wider blade to move huge amounts of soil each day. Match the machine to your work. Do not buy the big 24M for small jobs, and do not use the 16M3 where you need very heavy grading all day.

    Ans.

    Yes, both machines use Cat's dealer network in India. Cat has good service and parts support across the country. But the mid-size 16M3 is more common, so parts and trained drivers are easier to find for it. The very big 24M is used mostly on large projects, so its parts and skilled drivers are fewer. If your site is far from a Cat dealer, keep some common spare parts ready.

    Ans.

    The Cat 24M costs much more to run. It has a bigger engine, so it uses more diesel, more tyres and more service. This is fine only if you keep it busy on big earthwork every day. The Cat 16M3 uses less fuel and costs less to keep. For most road and site jobs, the 16M3 gives you a lower running cost. Pick the 24M only when the extra work it does pays for the extra running cost.

    Ans.

    The Cat 16M3 is easier to sell later. Many contractors need a mid-size grader, so more buyers look for it. You can sell it faster and get a fair price. The Cat 24M is a special large machine. Fewer buyers need one, so it takes longer to sell. If you may sell in a few years, the 16M3 is the safer choice.

    Ans.

    Yes, the GPS grade control is very useful. It helps the machine cut the ground to the exact level from the plan. This means less rework, faster jobs and less checking by hand. On big EPC and road jobs it saves a lot of time and money. Both machines come with GPS ready, so your team should learn to use it well.

    Ans.

    Yes, you can buy them on loan or EMI. Banks, finance companies and Cat dealers all give loans for graders. Big companies can also take them on lease. How much you pay each month depends on your down payment and your loan record. Ask two or three lenders first. Do not take the first offer.

    Cat 16M3 Vs Cat 24M - Compare Price & Availability Across 600+ Locations in India

    Compare Cat 16M3 Vs Cat 24M price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare