Popular Products
Popular Comparisons
Contact Us



    Your Captcha*

    captcha

    Contact Info
    Chat with us

    Cat 16M3 VS BEML BG825 Motor Grader

    Cat 16M3
    Price Available Soon*

    Cat 16M3

    • Engine

      Cat 290 HP

    • Blade

      4900 mm

    • Weight

      32411 kg

    • Turning Radius

      9300 mm

    • Max Forward Speed

      51.7 km/hr

    • Max Reverse Speed

      40.8 km/hr
    Large (>50 Ton)
    BEML BG825
    ₹ 1.5-1.8 Crores*

    BEML BG825

    • Engine

      BEML 280 HP

    • Blade

      4928 mm

    • Weight

      25750 kg

    • Turning Radius

      7900 mm

    • Max Forward Speed

      44.9 km/hr

    • Max Reverse Speed

      47.9 km/hr
    Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Cat 16M3BEML BG825
    Cat 16M3 VS BEML BG825 Motor Grader
    16M3 Motor Grader
    Cat 16M3

    Price Available Soon

    BG825 Motor Grader
    BEML BG825

    ₹ 1.5-1.8 Crores

    Particulars Cat 16M3 BEML BG825

    Overview Summary

    Comparing the BEML BG825 and Cat 16M3 shows key differences in power, precision, and added features. The BEML BG825 offers a higher forward speed and a larger blade length, while the Cat 16M3 delivers more power, better torque, and additional features such as AC cabin and GPS.

    BEML BG825 Motor Grader

    Pros:

    • High gross power of 280 HP at 2100 rpm
    • Large blade length of 4928 mm
    • High forward speed of 44.9 km/hr
    • Hydraulic blade side shift and tip control for precision
    • Equipped with orbitrol; full hydraulic steering system
    • Large fuel tank capacity of 500 L
    • BEML hydro shift transmission for smooth gear changes

    Cons:

    • AC cabin and GPS are not available
    • Less ground clearance at 680 mm compared to Cat 16M3
    • Lower maximum system pressure of 20.6 MPa compared to Cat 16M3
    • Turning radius is significantly smaller at 7900 mm

    Cat 16M3 Motor Grader

    Pros:

    • Higher gross power of 290 HP at 2000 rpm
    • Greater torque with 1771 Nm
    • Advanced engine type with US EPA Tier 4 Final compliance
    • Higher maximum system pressure of 24.75 MPa
    • Offers AC cabin and GPS as standard features
    • Higher ground clearance of 396 mm
    • More efficient fuel while offering a larger blade down pressure of 19895 kgf

    Cons:

    • Slightly smaller blade length of 4900 mm
    • Lesser forward speed of 51.7 km/hr compared to BEML BG825
    • Warranty limited to 1 year, similar to BEML BG825

    Pros:

    Cons:

    Closing Recommendation

    The Cat 16M3 is typically better suited for tasks requiring advanced technology and comforts, such as operator GPS and AC cabin. However, the BEML BG825's longer blade and faster speeds might be preferred for jobs prioritizing speed and scale.

    Cat 16M3 Vs BEML BG825 Motor Grader Price, Technical Specifications & Features

    Brand Caterpillar Motor grader BEML Motor grader
    Type Large (>50 Ton) Large (>50 Ton)
    Price Price Available Soon ₹ 1.5-1.8 Crores
    Engine Cat 290 HP BEML 280 HP
    Weight 32411 kg 25750 kg
    Min. Turning Radius 9300 mm 7900 mm
    Max. Forward Speed 51.7 km/hr 44.9 km/hr
    Max. Reverse Speed 40.8 km/hr 47.9 km/hr
    Quick Overview:

    The Cat 16M3 Motor Grader is a high-capacity mining-class grader designed for haul roads, large infrastructure, and heavy earthmoving work. It delivers strong performance, precision, and durability in challenging environments. Powered by a Cat C13 engine with variable horsepower, this grader machine produces 290 HP depending on gear selection. This provides efficient power delivery, high torque, and better fuel management across various applications. The machine has an operating weight of 32 tons and a 4.9 m moldboard, offering high stability and wider coverage. It reduces the number of passes and improves grading efficiency in mining operations. Its electro-hydraulic load-sensing system ensures precise blade control, while the direct drive powershift transmission (8F+6R) ensures smooth operation. Strong blade pull and downforce enhance cutting performance in hard materials. Manufactured by Caterpillar Inc., it guarantees durability and uptime, making it ideal for large mining and infrastructure projects.

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.
    Overview Summary

    Comparing the BEML BG825 and Cat 16M3 shows key differences in power, precision, and added features. The BEML BG825 offers a higher forward speed and a larger blade length, while the Cat 16M3 delivers more power, better torque, and additional features such as AC cabin and GPS.

    BEML BG825 Motor Grader

    Pros:

    • High gross power of 280 HP at 2100 rpm
    • Large blade length of 4928 mm
    • High forward speed of 44.9 km/hr
    • Hydraulic blade side shift and tip control for precision
    • Equipped with orbitrol; full hydraulic steering system
    • Large fuel tank capacity of 500 L
    • BEML hydro shift transmission for smooth gear changes

    Cons:

    • AC cabin and GPS are not available
    • Less ground clearance at 680 mm compared to Cat 16M3
    • Lower maximum system pressure of 20.6 MPa compared to Cat 16M3
    • Turning radius is significantly smaller at 7900 mm

    Cat 16M3 Motor Grader

    Pros:

    • Higher gross power of 290 HP at 2000 rpm
    • Greater torque with 1771 Nm
    • Advanced engine type with US EPA Tier 4 Final compliance
    • Higher maximum system pressure of 24.75 MPa
    • Offers AC cabin and GPS as standard features
    • Higher ground clearance of 396 mm
    • More efficient fuel while offering a larger blade down pressure of 19895 kgf

    Cons:

    • Slightly smaller blade length of 4900 mm
    • Lesser forward speed of 51.7 km/hr compared to BEML BG825
    • Warranty limited to 1 year, similar to BEML BG825

    Pros:

    Cons:

    Closing Recommendation

    The Cat 16M3 is typically better suited for tasks requiring advanced technology and comforts, such as operator GPS and AC cabin. However, the BEML BG825's longer blade and faster speeds might be preferred for jobs prioritizing speed and scale.

    Cat 16M3 Vs BEML BG825 Motor Grader Price, Technical Specifications & Features

    Cat 16M3 BEML BG825
    Brand
    Caterpillar Motor grader BEML Motor grader
    Type
    Large (>50 Ton) Large (>50 Ton)
    Price
    Price Available Soon ₹ 1.5-1.8 Crores
    Engine
    Cat 290 HP BEML 280 HP
    Weight
    32411 kg 25750 kg
    Min. Turning Radius
    9300 mm 7900 mm
    Max. Forward Speed
    51.7 km/hr 44.9 km/hr
    Max. Reverse Speed
    40.8 km/hr 47.9 km/hr
    Quick Overview:

    The Cat 16M3 Motor Grader is a high-capacity mining-class grader designed for haul roads, large infrastructure, and heavy earthmoving work. It delivers strong performance, precision, and durability in challenging environments. Powered by a Cat C13 engine with variable horsepower, this grader machine produces 290 HP depending on gear selection. This provides efficient power delivery, high torque, and better fuel management across various applications. The machine has an operating weight of 32 tons and a 4.9 m moldboard, offering high stability and wider coverage. It reduces the number of passes and improves grading efficiency in mining operations. Its electro-hydraulic load-sensing system ensures precise blade control, while the direct drive powershift transmission (8F+6R) ensures smooth operation. Strong blade pull and downforce enhance cutting performance in hard materials. Manufactured by Caterpillar Inc., it guarantees durability and uptime, making it ideal for large mining and infrastructure projects.

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    Cat 16M3 Vs BEML BG825 Motor Grader Key Highlights

    Cat 16M3 BEML BG825
    Engine Make Cat C13 ACERT VHP BEML BS6140
    Max Torque 1771 Nm NA
    Fuel Tank 496 L 500 L
    Hydraulic System 146 L 105 L
    Tires 19.5 x 25 MP -23.5R25 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres
    Frame Height 460 mm 400 mm
    Max Lift Above Ground 400 mm 490 mm
    Max Cutting Depth 470 mm 680 mm
    Blade Pitch Angle 40° forward; 5° backward 49° forward; 5° backward
    Wheel Base 7365 mm 7100 mm
    Overall Length 12051 mm 11470 mm
    Overall Height 3719 mm 3750 mm
    Warranty 1 Year 1 Yr. / 2500 hr.
    AC Cabin Standard Not Available
    GPS Standard Not Available

    Cat 16M3 Vs BEML BG825 Motor Grader Key Highlights

    Cat 16M3 BEML BG825
    Engine Make
    Cat C13 ACERT VHP BEML BS6140
    Max Torque
    1771 Nm NA
    Fuel Tank
    496 L 500 L
    Hydraulic System
    146 L 105 L
    Tires
    19.5 x 25 MP -23.5R25 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres
    Frame Height
    460 mm 400 mm
    Max Lift Above Ground
    400 mm 490 mm
    Max Cutting Depth
    470 mm 680 mm
    Blade Pitch Angle
    40° forward; 5° backward 49° forward; 5° backward
    Wheel Base
    7365 mm 7100 mm
    Overall Length
    12051 mm 11470 mm
    Overall Height
    3719 mm 3750 mm
    Warranty
    1 Year 1 Yr. / 2500 hr.
    AC Cabin
    Standard Not Available
    GPS
    Standard Not Available

    Cat 16M3 Vs BEML BG825 Motor Grader Specifications

    Engine

    Cat 16M3 BEML BG825
    Model Cat 290 HP BEML 280 HP
    Fuel Diesel Diesel
    Type US EPA Tier 4 Final / EU Stage IV / Japan 2014 ( Tier 4 Final) 4 stroke; water-cooled
    Gross Power 290 HP (216 kW) @ 2000 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders 6 6 inline
    Max Torque 1771 Nm NA
    Displacement 12.5 L 15.24 L
    Battery NA 2 x 12 V / 200 Ah maintenance free batteries
    Alternator NA 24V / 45A

    Transmission

    Cat 16M3 BEML BG825
    Type Direct drive; power shift; countershaft BEML - Hydro Shift Transmission

    Speed

    Cat 16M3 BEML BG825
    Max. Forward Speed 51.7 km/hr 44.9 km/hr
    Max. Reverse Speed 40.8 km/hr 47.9 km/hr

    Axles

    Cat 16M3 BEML BG825
    Rear Axle NA Full-flotaing rear is made of forged heat treated steel
    Front Axle NA Reverse Elliot-type

    Tyres

    Cat 16M3 BEML BG825
    Size 19.5 x 25 MP -23.5R25 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres

    Steering

    Cat 16M3 BEML BG825
    Type NA Orbitrol; full hydraulic steering system
    Minimum Turning Radius 9300 mm 7900 mm
    Steering-Angle 47.5° 50°

    Brakes

    Cat 16M3 BEML BG825
    Service Oil-actuated; oil disc Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking.
    Parking Spring Applied; hydraulically released. Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested.

    Frame

    Cat 16M3 BEML BG825
    Front Frame Height 460 mm 400 mm
    Front Frame Width 356 mm 350 mm
    Front Frame Thickness 14 mm NA

    MoldBoard

    Cat 16M3 BEML BG825
    Type NA Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached.
    Blade Length 4900 mm 4928 mm
    Blade Height NA 800 mm
    Blade Thickness 25 mm 25 mm
    Cutting Edge 203 x 25 mm 203 x 19 mm
    Blade Pull 23985 kgf NA
    Blade Down Pressure 19895 kgf NA
    Moldboard Side Shift (Right/Left) 790 mm / 740 mm NA
    Maximum Shoulder Reach (Right/Left) 2311 mm / 2311 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground 400 mm 490 mm
    Maximum Cutting Depth 470 mm 680 mm
    Blade Pitch Angle 40° forward; 5° backward 49° forward; 5° backward

    Hydraulics

    Cat 16M3 BEML BG825
    Type Electro-hydraulic load sensing; closed center; Variable Piston Three gear pump (tandem) type
    Maximum Pump Flow 280 L/min 268 L/min
    Maximum System Pressure 24.75 MPa 20.6 MPa

    Service Capacities

    Cat 16M3 BEML BG825
    Fuel Tank 496 L 500 L
    Cooling System 70 L 58 L
    Engine Oil 36 L 38 L
    DEF Tank 16 L NA
    Trasnsmission Oil 98.5 L 25 L
    Final Drive NA 34 L
    Hydraulic System 146 L 105 L
    Circle Reverse Housing 10 L NA

    Weight

    Cat 16M3 BEML BG825
    Gross Vehicle Weight 32411 kg 25750 kg
    Moldboard Base 3066 mm 3100 mm
    Wheelbase 7365 mm 7100 mm
    Tandem Wheelbase 1841 mm 1840 mm
    Width of Standard Moldboard 4900 mm 4928 mm
    Overall Length 12051 mm 11470 mm
    Tread Gauge 2703 mm 2460 mm
    Width of Tires 3411 mm 3050 mm
    Articulation, left or right NA 25°
    Minimum Ground Clearence 396 mm 680 mm

    Cat 16M3 Vs BEML BG825 Motor Grader Specifications

    Engine

    Cat 16M3 BEML BG825
    Model
    Cat 290 HP BEML 280 HP
    Fuel
    Diesel Diesel
    Type
    US EPA Tier 4 Final / EU Stage IV / Japan 2014 ( Tier 4 Final) 4 stroke; water-cooled
    Gross Power
    290 HP (216 kW) @ 2000 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders
    6 6 inline
    Max Torque
    1771 Nm NA
    Displacement
    12.5 L 15.24 L
    Battery
    NA 2 x 12 V / 200 Ah maintenance free batteries
    Alternator
    NA 24V / 45A

    Speed

    Cat 16M3 BEML BG825
    Max. Forward Speed
    51.7 km/hr 44.9 km/hr
    Max. Reverse Speed
    40.8 km/hr 47.9 km/hr

    Axles

    Cat 16M3 BEML BG825
    Rear Axle
    NA Full-flotaing rear is made of forged heat treated steel
    Front Axle
    NA Reverse Elliot-type

    Tyres

    Cat 16M3 BEML BG825
    Size
    19.5 x 25 MP -23.5R25 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres

    Steering

    Cat 16M3 BEML BG825
    Type
    NA Orbitrol; full hydraulic steering system
    Minimum Turning Radius
    9300 mm 7900 mm
    Steering-Angle
    47.5° 50°

    Brakes

    Cat 16M3 BEML BG825
    Service
    Oil-actuated; oil disc Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking.
    Parking
    Spring Applied; hydraulically released. Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested.

    Frame

    Cat 16M3 BEML BG825
    Front Frame Height
    460 mm 400 mm
    Front Frame Width
    356 mm 350 mm
    Front Frame Thickness
    14 mm NA

    Moldboard

    Cat 16M3 BEML BG825
    Type
    NA Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached.
    Blade Length
    4900 mm 4928 mm
    Blade Height
    NA 800 mm
    Blade Thickness
    25 mm 25 mm
    Cutting Edge
    203 x 25 mm 203 x 19 mm
    Blade Pull
    23985 kgf NA
    Blade Down Pressure
    19895 kgf NA
    Moldboard Side Shift (Right/Left)
    790 mm / 740 mm NA
    Maximum Shoulder Reach (Right/Left)
    2311 mm / 2311 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground
    400 mm 490 mm
    Maximum Cutting Depth
    470 mm 680 mm
    Blade Pitch Angle
    40° forward; 5° backward 49° forward; 5° backward

    Hydraulics

    Cat 16M3 BEML BG825
    Type
    Electro-hydraulic load sensing; closed center; Variable Piston Three gear pump (tandem) type
    Maximum Pump Flow
    280 L/min 268 L/min
    Maximum System Pressure
    24.75 MPa 20.6 MPa

    Service Capacities

    Cat 16M3 BEML BG825
    Fuel Tank
    496 L 500 L
    Cooling System
    70 L 58 L
    Engine Oil
    36 L 38 L
    DEF Tank
    16 L NA
    Trasnsmission Oil
    98.5 L 25 L
    Final Drive
    NA 34 L
    Hydraulic System
    146 L 105 L
    Circle Reverse Housing
    10 L NA

    Weight

    Cat 16M3 BEML BG825
    Gross Vehicle Weight
    32411 kg 25750 kg
    Moldboard Base
    3066 mm 3100 mm
    Wheelbase
    7365 mm 7100 mm
    Tandem Wheelbase
    1841 mm 1840 mm
    Width of Standard Moldboard
    4900 mm 4928 mm
    Overall Length
    12051 mm 11470 mm
    Tread Gauge
    2703 mm 2460 mm
    Width of Tires
    3411 mm 3050 mm
    Articulation, left or right
    NA 25°
    Minimum Ground Clearence
    396 mm 680 mm

    Popular Comparisons with Cat 16M3

    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Popular Comparisons with BEML BG825

    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Cat 16M3 Vs BEML BG825 - Compare Price & Availability Across 600+ Locations in India

    Compare Cat 16M3 Vs BEML BG825 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare