Suno Sabki, Chuno Apni.
Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    JCB 455-5N VS Liebherr L550 Wheel Loader

    JCB 455-5N
    Price Available Soon*

    JCB 455-5N

    • Engine

      Cummins 225 HP

    • Bucket

      3.3 m³

    • Weight

      18000 kg

    • Fwd. Speed

      38 km/h

    • Dump Height

      2810 mm

    • Tripping Load

      10975 kg
    Medium (15-30 Ton)
    Liebherr L550
    Price Available Soon*

    Liebherr L550

    • Engine

      John Deere 228 HP

    • Bucket

      3.4 m³

    • Weight

      17750 kg

    • Fwd. Speed

      40 km/h

    • Dump Height

      3020 mm

    • Tripping Load

      12430 kg
    Medium (15-30 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights JCB 455-5NLiebherr L550
    JCB 455-5N VS Liebherr L550 Wheel Loader
    JCB 455 Loader Price
    JCB 455-5N

    Price Available Soon

    Liebherr 550 Loader Price
    Liebherr L550

    Price Available Soon

    Particulars JCB 455-5N Liebherr L550

    JCB 455-5N vs Liebherr L550: Which Wheel Loader Should You Buy?

    Both are heavy wheel loaders built for mining, quarry and bulk material work. The JCB 455-5N runs a Powershift automatic gearbox and carries a strong payload, so it moves heavy loads with smooth gear changes. The Liebherr L550 uses a hydrostatic transmission and a bigger bucket, so it can carry more material in each pass and gives the driver finer control at low speed.

    GPS comes fitted as standard on the JCB, which helps if you run more than one machine and want to check them from one place. On the Liebherr, GPS is an added option, but its AC cabin is standard, so the driver stays comfortable through long shifts at no extra cost. If your site sits under strict emission rules, check the JCB's emission stage rating with your dealer before you buy, since some regions limit older-stage machines. See the full JCB wheel loader range, the Liebherr wheel loader range, all wheel loaders, or read our wheel loader guide.

    JCB 455-5N Wheel Loader

    Pros:

    • Cummins 225 HP engine with CRDi and water-cooled diesel with aftertreatment system
    • Powershift (ZF4WG190) auto transmission which may offer smooth gear transitions
    • High max torque of 1000 Nm @ 1300 rpm, beneficial for heavy-load conditions
    • Impressive payload capacity of 5490 kg and tipping load full turn of 10975 kg
    • GPS as a standard feature for tracking and fleet management

    Cons:

    • Emission Stage 5 may limit use in certain regions due to regulatory compliance
    • Lower fuel tank capacity at 280 L compared to Liebherr L550
    • Hydraulic system specification not provided
    • AC Cabin is optional, which might be necessary for operator comfort in harsh weather conditions

    Liebherr L550 Wheel Loader

    Pros:

    • John Deere 228 HP engine with an Electronic Common Rail high-pressure injection
    • Higher bucket capacity of 3.4 m³ which could translate to higher productivity
    • Larger fuel tank capacity at 300 L may offer extended operation times between refills
    • AC Cabin comes standard, ensuring operator comfort
    • More advanced hydrostatic transmission which may provide precise control and reduce power loss

    Cons:

    • Slightly lower engine torque at 890 Nm compared to JCB 455-5N
    • GPS is optional which might be an additional cost for fleet management capabilities
    • Engine oil capacity of 20 L, which is slightly less than JCB 455-5N's 22 L
    • Tyre size and brand not specified, which can affect ground compaction and traction performance

    Pros:

    Cons:

    Closing Recommendation

    Both the JCB 455-5N and Liebherr L550 handle heavy loading work in mining and quarry sites. Choose the JCB 455-5N if you want a strong payload, high torque and GPS tracking fitted as standard. Choose the Liebherr L550 if you want a bigger bucket, a standard AC cabin and the fine control a hydrostatic transmission gives at low speed. So match the machine to your work: JCB 455-5N for heavy payload and tracked fleet use, Liebherr L550 for bucket capacity and driver comfort.

    JCB 455-5N Vs Liebherr L550 Wheel Loader Price, Technical Specifications & Features

    Brand JCB Wheel Loader Liebherr Wheel loader
    Type Medium (15-30 Ton) Medium (15-30 Ton)
    Ex-Factory Price (GST incl.) Price Available Soon Price Available Soon
    Engine Cummins 225 HP John Deere 228 HP
    Bucket 3.3 m³ 3.4 m³
    Weight 18000 kg 17750 kg
    Max. Forward Speed 38 km/h 40 km/h
    Dump Height 2810 mm 3020 mm
    Tripping Load 10975 kg 12430 kg
    Quick Overview:

    The JCB 455-5N wheel loader is a heavy-duty payloader designed for large-scale material handling in construction, mining, and industrial settings. Powered by a robust 168 HP engine, this machine from JCB Construction Equipment delivers high torque, consistent power output, and reliable hydraulic performance for ongoing operations. With a payload capacity of about 5,500 kg, this JCB wheel loader efficiently handles bulk material. Its reinforced design, high stability, and operational durability support sustained productivity in challenging jobsite conditions that require dependable performance.

    German-engineered for Indian conditions, the Liebherr L550 wheel loader ensures stability, durability, and precision in demanding jobs, enabling this wheel loader to excel in heavy-duty material handling operations.

    JCB 455-5N vs Liebherr L550: Which Wheel Loader Should You Buy?

    Both are heavy wheel loaders built for mining, quarry and bulk material work. The JCB 455-5N runs a Powershift automatic gearbox and carries a strong payload, so it moves heavy loads with smooth gear changes. The Liebherr L550 uses a hydrostatic transmission and a bigger bucket, so it can carry more material in each pass and gives the driver finer control at low speed.

    GPS comes fitted as standard on the JCB, which helps if you run more than one machine and want to check them from one place. On the Liebherr, GPS is an added option, but its AC cabin is standard, so the driver stays comfortable through long shifts at no extra cost. If your site sits under strict emission rules, check the JCB's emission stage rating with your dealer before you buy, since some regions limit older-stage machines. See the full JCB wheel loader range, the Liebherr wheel loader range, all wheel loaders, or read our wheel loader guide.

    JCB 455-5N Wheel Loader

    Pros:

    • Cummins 225 HP engine with CRDi and water-cooled diesel with aftertreatment system
    • Powershift (ZF4WG190) auto transmission which may offer smooth gear transitions
    • High max torque of 1000 Nm @ 1300 rpm, beneficial for heavy-load conditions
    • Impressive payload capacity of 5490 kg and tipping load full turn of 10975 kg
    • GPS as a standard feature for tracking and fleet management

    Cons:

    • Emission Stage 5 may limit use in certain regions due to regulatory compliance
    • Lower fuel tank capacity at 280 L compared to Liebherr L550
    • Hydraulic system specification not provided
    • AC Cabin is optional, which might be necessary for operator comfort in harsh weather conditions

    Liebherr L550 Wheel Loader

    Pros:

    • John Deere 228 HP engine with an Electronic Common Rail high-pressure injection
    • Higher bucket capacity of 3.4 m³ which could translate to higher productivity
    • Larger fuel tank capacity at 300 L may offer extended operation times between refills
    • AC Cabin comes standard, ensuring operator comfort
    • More advanced hydrostatic transmission which may provide precise control and reduce power loss

    Cons:

    • Slightly lower engine torque at 890 Nm compared to JCB 455-5N
    • GPS is optional which might be an additional cost for fleet management capabilities
    • Engine oil capacity of 20 L, which is slightly less than JCB 455-5N's 22 L
    • Tyre size and brand not specified, which can affect ground compaction and traction performance

    Pros:

    Cons:

    Closing Recommendation

    Both the JCB 455-5N and Liebherr L550 handle heavy loading work in mining and quarry sites. Choose the JCB 455-5N if you want a strong payload, high torque and GPS tracking fitted as standard. Choose the Liebherr L550 if you want a bigger bucket, a standard AC cabin and the fine control a hydrostatic transmission gives at low speed. So match the machine to your work: JCB 455-5N for heavy payload and tracked fleet use, Liebherr L550 for bucket capacity and driver comfort.

    JCB 455-5N Vs Liebherr L550 Wheel Loader Price, Technical Specifications & Features

    JCB 455-5N Liebherr L550
    Brand
    JCB Wheel Loader Liebherr Wheel loader
    Type
    Medium (15-30 Ton) Medium (15-30 Ton)
    Ex-Factory Price (GST incl.)
    Price Available Soon Price Available Soon
    Engine
    Cummins 225 HP John Deere 228 HP
    Bucket
    3.3 m³ 3.4 m³
    Weight
    18000 kg 17750 kg
    Fwd. Speed
    38 km/h 40 km/h
    Dump Height
    2810 mm 3020 mm
    Tripping Load
    10975 kg 12430 kg
    Quick Overview:

    The JCB 455-5N wheel loader is a heavy-duty payloader designed for large-scale material handling in construction, mining, and industrial settings. Powered by a robust 168 HP engine, this machine from JCB Construction Equipment delivers high torque, consistent power output, and reliable hydraulic performance for ongoing operations. With a payload capacity of about 5,500 kg, this JCB wheel loader efficiently handles bulk material. Its reinforced design, high stability, and operational durability support sustained productivity in challenging jobsite conditions that require dependable performance.

    German-engineered for Indian conditions, the Liebherr L550 wheel loader ensures stability, durability, and precision in demanding jobs, enabling this wheel loader to excel in heavy-duty material handling operations.

    JCB 455-5N Vs Liebherr L550 Wheel Loader Key Highlights

    JCB 455-5N Liebherr L550
    Engine Make Cummins QSB 6.7 John Deere 6068HB450
    Max Torque 1000 Nm @ 1300 rpm 890 Nm @ 1600 rpm
    Fuel Tank 280 L 300 L
    Hydraulic System 132 L/min / 94 L/min 234 L/min
    Min. Ground Clearance 480 mm 490 mm
    Payload 5490 kg 5740 kg
    Steering Angle ±40° ±38°
    Drive Type 4-wheel drive (4WD) 4-wheel drive (4WD)
    Wheelbase 3300 mm 3410 mm
    Tyres 23.5x25 20PR BKT /CEAT L3 Tubeless 23.5R25 L3
    Max. Breakout Force 154 kN 165 kN
    Overall Length 8460 mm 8525 mm
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    AC Cabin Optional Standard
    GPS Standard Optional

    JCB 455-5N Vs Liebherr L550 Wheel Loader Key Highlights

    JCB 455-5N Liebherr L550
    Engine Make
    Cummins QSB 6.7 John Deere 6068HB450
    Max Torque
    1000 Nm @ 1300 rpm 890 Nm @ 1600 rpm
    Fuel Tank
    280 L 300 L
    Hydraulic System
    132 L/min / 94 L/min 234 L/min
    Min. Ground Clearance
    480 mm 490 mm
    Payload
    5490 kg 5740 kg
    Steering Angle
    ±40° ±38°
    Drive Type
    4-wheel drive (4WD) 4-wheel drive (4WD)
    Wheelbase
    3300 mm 3410 mm
    Tyres
    23.5x25 20PR BKT /CEAT L3 Tubeless 23.5R25 L3
    Max. Breakout Force
    154 kN 165 kN
    Overall Length
    8460 mm 8525 mm
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    AC Cabin
    Optional Standard
    GPS
    Standard Optional

    JCB 455-5N Vs Liebherr L550 Wheel Loader Specifications

    Engine

    JCB 455-5N Liebherr L550
    Engine Make Cummins QSB 6.7 John Deere 6068HB450
    Engine Type Common Rail direct injection; (CRDi); Water cooled diesel with aftertreatment system Water-cooled; turbo charged; intercooled; Electronic Common Rail high-pressure injection
    Aspiration Turbocharged & charge air cooled Turbocharged
    Emission Stage 5 Bharat stage IV (India) / Stage V
    Max Torque 1000 Nm @ 1300 rpm 890 Nm @ 1600 rpm
    Max Power 225 HP (168 kW) @ 2200 rpm 228 HP (168 kW) @ 2400 rpm
    Piston Displacement 6.7 L 6.8 L
    No Of Cylinders 6 Cylinders 6 Cylinders
    Battery 2 x 12V / 1000 CCA 24V / 135Ah
    Alternator 28V / 120A 24V / 100A

    Power Train

    JCB 455-5N Liebherr L550
    Transmission Powershift (ZF4WG190) auto transmission Hydrostatic
    Drive Type 4-wheel drive (4WD) 4-wheel drive (4WD)
    Torque Converter Single stage integral torque convertor. NA

    Brakes

    JCB 455-5N Liebherr L550
    Service Hydraulic wet disc brakes on all four wheels. Self-locking of the hydrostatic driveline (acting on all four wheels) and additional pumpaccumulator brake system with wet multi- disc brakes (two seperate brake circuits)
    Parking Electro-hydraulic disc brake on transmission output shaft. Electro-hydraulically actuated spring-loaded disc brake system on the transmission

    Steering System

    JCB 455-5N Liebherr L550
    Type Hydraulic Power-Assisted Steering. Load-sensing articulated steering
    Steering-Angle ±40° ±38°

    Axles And Final Drive

    JCB 455-5N Liebherr L550
    Front Axle Limited Slip Differential (LSD) Fixed
    Rear Axle Limited Slip Differential (LSD) Centre pivot & oscillating
    Oscillating Angle ±12.5° ±13°

    Speed

    JCB 455-5N Liebherr L550
    Max. Forward Speed 38 km/h 40 km/h
    Max. Reverse Speed 26 km/h NA

    Hydraulic System

    JCB 455-5N Liebherr L550
    System Type Load sensing Load-sensing
    Pump Type Variable displacement Piston Pump Swash plate type variable flow pump
    Maximum Pump Flow 132 L/min / 94 L/min 234 L/min
    System Pressure 250 - 310 bar 360 bar

    Special Refill Capacities

    JCB 455-5N Liebherr L550
    Fuel Tank 280 L 300 L
    Hydraulic System NA 240 L
    Engine Oil 22 L 20 L
    Cooling System 38 L 34 L
    Rear Axle Oil 35 L 35 L
    Front Axle Oil 35 L 35 L
    Hydraulic Tank 180 L 135 L
    Transmission Oil 38 L 4.1 L
    Def Tank 60 L 20 L

    Dimensions

    JCB 455-5N Liebherr L550
    Overall Length With Bucket 8460 mm 8525 mm
    Wheel Base 3300 mm 3410 mm
    Height Over Cab 2400 mm 3360 mm
    Height Over Exhaust 3220 mm 3015 mm
    Min Grond Clearance 480 mm 490 mm
    Width Over Tyres 2720 mm 2650 mm
    Wheel Tread 2100 mm 2000 mm
    Tyre Size 23.5x25 20PR BKT /CEAT L3 Tubeless 23.5R25 L3

    Performance

    JCB 455-5N Liebherr L550
    Bucket Capacity 3.3 m³ 3.4 m³
    Bucket Width 2800 mm 2880 mm
    Payload 5490 kg 5740 kg
    Tipping Load Straight 13170 kg 14120 kg
    Tipping Load Full Turn 10975 kg 12430 kg
    Max. Breakout Force 154 kN 165 kN
    Operating Weight 18000 kg 17750 kg
    Max Dump Angle 43° NA
    Bucket Roll Back Angle Full Height 68° NA
    Bucket Roll Back At Carry 43° NA
    Bucket Roll Back At Ground Level 38° NA
    Dumping Height, Fully Raised 2810 mm 3020 mm
    Dumping Reach, Fully Raised 1270 mm 1025 mm
    Max. Hinge Pin Height 4150 mm 4150 mm
    Max. Digging Depth 119 mm 80 mm
    Turning Radius Over Tyres NA 6300 mm
    Turning Radius Over Bucket 6640 mm 6910 mm

    JCB 455-5N Vs Liebherr L550 Wheel Loader Specifications

    Engine

    JCB 455-5N Liebherr L550
    Engine Make
    Cummins QSB 6.7 John Deere 6068HB450
    Engine Type
    Common Rail direct injection; (CRDi); Water cooled diesel with aftertreatment system Water-cooled; turbo charged; intercooled; Electronic Common Rail high-pressure injection
    Aspiration
    Turbocharged & charge air cooled Turbocharged
    Emission
    Stage 5 Bharat stage IV (India) / Stage V
    Max Torque
    1000 Nm @ 1300 rpm 890 Nm @ 1600 rpm
    Max Power
    225 HP (168 kW) @ 2200 rpm 228 HP (168 kW) @ 2400 rpm
    Piston Displacement
    6.7 L 6.8 L
    No Of Cylinders
    6 Cylinders 6 Cylinders
    Battery
    2 x 12V / 1000 CCA 24V / 135Ah
    Alternator
    28V / 120A 24V / 100A

    Power Train

    JCB 455-5N Liebherr L550
    Transmission
    Powershift (ZF4WG190) auto transmission Hydrostatic
    Drive Type
    4-wheel drive (4WD) 4-wheel drive (4WD)
    Torque Converter
    Single stage integral torque convertor. NA

    Brakes

    JCB 455-5N Liebherr L550
    Service
    Hydraulic wet disc brakes on all four wheels. Self-locking of the hydrostatic driveline (acting on all four wheels) and additional pumpaccumulator brake system with wet multi- disc brakes (two seperate brake circuits)
    Parking
    Electro-hydraulic disc brake on transmission output shaft. Electro-hydraulically actuated spring-loaded disc brake system on the transmission

    Steering System

    JCB 455-5N Liebherr L550
    Type
    Hydraulic Power-Assisted Steering. Load-sensing articulated steering
    Steering-Angle
    ±40° ±38°

    Speed

    JCB 455-5N Liebherr L550
    Max. Forward Speed
    38 km/h 40 km/h
    Max. Reverse Speed
    26 km/h NA

    Axles And Final Drive

    JCB 455-5N Liebherr L550
    Front Axle
    Limited Slip Differential (LSD) Fixed
    Rear Axle
    Limited Slip Differential (LSD) Centre pivot & oscillating
    Oscillating Angle
    ±12.5° ±13°

    Hydraulics System

    JCB 455-5N Liebherr L550
    System Type
    Load sensing Load-sensing
    Pump Type
    Variable displacement Piston Pump Swash plate type variable flow pump
    Maximum Pump Flow
    132 L/min / 94 L/min 234 L/min
    System Pressure
    250 - 310 bar 360 bar

    Tyres

    JCB 455-5N Liebherr L550
    Size
    Not Available Not Available

    Special Refill Cpacities

    JCB 455-5N Liebherr L550
    Fuel Tank
    280 L 300 L
    Hydraulic System
    NA 240 L
    Engine Oil
    22 L 20 L
    Cooling System
    38 L 34 L
    Rear Axle Oil
    35 L 35 L
    Front Axle Oil
    35 L 35 L
    Hydraulic Tank
    180 L 135 L
    Transmission Oil
    38 L 4.1 L
    Def Tank
    60 L 20 L

    Dimensions

    JCB 455-5N Liebherr L550
    Overall Length With Bucket
    8460 mm 8525 mm
    Wheel Base
    3300 mm 3410 mm
    Height Over Cab
    2400 mm 3360 mm
    Height Over Exhaust
    3220 mm 3015 mm
    Min Grond Clearance
    480 mm 490 mm
    Width Over Tyres
    2720 mm 2650 mm
    Wheel Tread
    2100 mm 2000 mm
    Tyre Size
    23.5x25 20PR BKT /CEAT L3 Tubeless 23.5R25 L3

    Performance

    JCB 455-5N Liebherr L550
    Bucket Capacity
    3.3 m³ 3.4 m³
    Bucket Width
    2800 mm 2880 mm
    Payload
    5490 kg 5740 kg
    Tipping Load Straight
    13170 kg 14120 kg
    Tipping Load Full Turn
    10975 kg 12430 kg
    Max. Breakout Force
    154 kN 165 kN
    Operating Weight
    18000 kg 17750 kg
    Max Dump Angle
    43° NA
    Bucket Roll Back Angle Full Height
    68° NA
    Bucket Roll Back At Carry
    43° NA
    Bucket Roll Back At Ground Level
    38° NA
    Dumping Height, Fully Raised
    2810 mm 3020 mm
    Dumping Reach, Fully Raised
    1270 mm 1025 mm
    Max. Hinge Pin Height
    4150 mm 4150 mm
    Max. Digging Depth
    119 mm 80 mm
    Turning Radius Over Tyres
    NA 6300 mm
    Turning Radius Over Bucket
    6640 mm 6910 mm

    Popular Comparisons with JCB 455-5N

    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Hyundai 650 Loader Price
    Hyundai Hyundai HL650I-V
    4.5 rating
    ₹ 85-89 Lakhs
    17600 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    ACE 500 Wheel Loader Price in India
    ACE ACE ALN 500
    4.5 rating
    Price Available Soon
    16000 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    CAT 950 Wheel Loader Price
    Caterpillar Cat 950L
    4.5 rating
    Price Available Soon
    18136 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Cat 950 Loader Price
    Caterpillar CAT 950GC
    4.5 rating
    ₹ 1.2-1.4. Crore
    18849 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Volvo L120H Price
    Volvo Volvo L120H
    4.5 rating
    Price Available Soon
    21600 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Volvo L90H Specs
    Volvo Volvo L90H
    4.5 rating
    Price Available Soon
    17300 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Komatsu 380 Loader Price
    L&T Komatsu Komatsu WA380Z-6
    4.5 rating
    Price Available Soon
    17420 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Hyundai 950 Loader Price
    Hyundai Hyundai HL950I
    4.5 rating
    ₹ 85-87 Lakhs
    17700 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    XCMG 55 Loader Price
    XCMG XCMG ZL55GV
    4.5 rating
    ₹ 78-80 Lakhs
    17300 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    XCMG 48 Loader Price
    XCMG XCMG ZL48GV
    4.5 rating
    ₹ 72-74 Lakhs
    17300 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Liugong Loader 856 Price in India
    LiuGong Liugong 856H MAX
    4.5 rating
    ₹ 65-85 Lakhs
    18350 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Liugong Loader 848 Price in India
    LiuGong Liugong 848H
    4.5 rating
    Price Available Soon
    16870 kg
    Compare
    VS
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Tata Hitachi ZW225 Price
    Tata Hitachi Tata Hitachi ZW225 CEV 5
    4.5 rating
    ₹ 1.16 - 1.18 Crore
    17800 kg
    Compare

    Popular Comparisons with Liebherr L550

    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Hyundai 650 Loader Price
    Hyundai Hyundai HL650I-V
    4.5 rating
    ₹ 85-89 Lakhs
    17600 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    ACE 500 Wheel Loader Price in India
    ACE ACE ALN 500
    4.5 rating
    Price Available Soon
    16000 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    CAT 950 Wheel Loader Price
    Caterpillar Cat 950L
    4.5 rating
    Price Available Soon
    18136 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Cat 950 Loader Price
    Caterpillar CAT 950GC
    4.5 rating
    ₹ 1.2-1.4. Crore
    18849 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Volvo L90H Specs
    Volvo Volvo L90H
    4.5 rating
    Price Available Soon
    17300 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Komatsu 380 Loader Price
    L&T Komatsu Komatsu WA380Z-6
    4.5 rating
    Price Available Soon
    17420 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Hyundai 950 Loader Price
    Hyundai Hyundai HL950I
    4.5 rating
    ₹ 85-87 Lakhs
    17700 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    XCMG 55 Loader Price
    XCMG XCMG ZL55GV
    4.5 rating
    ₹ 78-80 Lakhs
    17300 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    XCMG 48 Loader Price
    XCMG XCMG ZL48GV
    4.5 rating
    ₹ 72-74 Lakhs
    17300 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Liugong Loader 856 Price in India
    LiuGong Liugong 856H MAX
    4.5 rating
    ₹ 65-85 Lakhs
    18350 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Liugong Loader 848 Price in India
    LiuGong Liugong 848H
    4.5 rating
    Price Available Soon
    16870 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    Tata Hitachi ZW225 Price
    Tata Hitachi Tata Hitachi ZW225 CEV 5
    4.5 rating
    ₹ 1.16 - 1.18 Crore
    17800 kg
    Compare
    VS
    Liebherr 550 Loader Price
    Liebherr Liebherr L550
    4.5 rating
    Price Available Soon
    17750 kg
    JCB 455 Loader Price
    JCB JCB 455-5N
    4.5 rating
    Price Available Soon
    18000 kg
    Compare

    Frequently Asked Question

    Ans.

    The JCB 455-5N has automatic gear changes through its Powershift gearbox. This gives smooth transitions between gears without the driver working a clutch, which helps on long loading shifts.

    Ans.

    It gives the driver finer, more precise control at low speed and can reduce power loss compared to a standard gear-shift transmission. This helps when placing a bucket load carefully or working in tight spots.

    Ans.

    The Liebherr L550 carries more material in each bucket pass than the JCB 455-5N. Its bucket capacity is listed higher in the data, which can mean fewer passes to move the same pile.

    Ans.

    No. GPS comes fitted as standard on the JCB 455-5N. On the Liebherr L550, GPS is an added option, so check this with your dealer if fleet tracking matters to you from day one.

    Ans.

    The JCB 455-5N is better for very heavy lifting and pushing. It has a higher maximum torque and a higher payload and tipping load figure than the Liebherr L550, so it handles heavier material with more ease.

    JCB 455-5N Vs Liebherr L550 - Compare Price & Availability Across 600+ Locations in India

    Compare JCB 455-5N Vs Liebherr L550 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare