Komatsu D39PX-22 vs BEML BD50: the two differ on 73 of 77 listed specs. The main differences are Engine (Komatsu 105 HP vs BEML 90 HP), Price (₹55 – 65 Lakh vs ₹30 – 40 Lakh), Operating Weight (9,480 kg vs 12,170 kg), Weight (9480 kg vs 12170 kg). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Komatsu D39PX-22
BEML BD50
Komatsu D39PX-22
VS
BEML BD50
Dozer
Komatsu D39PX-22 vs BEML BD50: the two differ on 73 of 77 listed specs. The main differences are Engine (Komatsu 105 HP vs BEML 90 HP), Price (₹55 – 65 Lakh vs ₹30 – 40 Lakh), Operating Weight (9,480 kg vs 12,170 kg), Weight (9480 kg vs 12170 kg). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Komatsu D39PX-22
₹55 – 65 Lakh
BEML BD50
₹30 – 40 Lakh
Particulars
Komatsu D39PX-22
BEML BD50
BEML BD50 vs Komatsu D39PX-22: which mini dozer fits your ground conditions?
The BEML BD50 is the simple, mechanical machine. It has a hand-shifted gearbox and an angle blade, built in India by BEML, and it can take an optional ripper for harder ground. The Komatsu D39PX-22 is the low-ground-pressure specialist. Its wide 635 mm track shoes spread the load, so its ground bearing pressure is far lower than the BD50's, letting it work fresh fill, ash ponds and wet clay where standard dozers sink. It also carries a bigger 2.30 m³ blade and turns in a tighter radius, but it has no ripper option, running only rear hydraulics instead.
Choose by your ground, not just the brand. For canal work, farm jobs and harder ground where a ripper helps break up rock, the BD50 is the easier fit, and any mechanic can keep it running. For soft, wet or filled ground like embankments, ash dykes and land reclamation, the D39PX-22's wide-track flotation is the reason to buy it, though its wide shoes wear faster on firm, rocky ground. Both are mini dozers in our dozer range. New to dozers? Read the bulldozer guide first.
BEML BD50
Pros:
Hand-shifted gearbox with no electronics, easy to repair with ordinary tools anywhere
Optional multi-shank ripper for harder ground
Made in India by BEML, with a parts network built for remote sites
Larger fuel tank at 240 litres
Cons:
Higher ground bearing pressure at 71.6 kPa, sinks more on soft ground than the D39PX-22
Smaller blade at 1.76 m³ than the D39PX-22's 2.30 m³
Wider turning radius than the D39PX-22
Canopy only, no cabin and no AC option
Komatsu D39PX-22
Pros:
Very low ground bearing pressure at 31.0 kPa on wide 635 mm track shoes, floats over soft ground
Bigger blade at 2.30 m³
Tighter turning radius at 2,400 mm
Optional ROPS cab with AC and heater
Cons:
No ripper option, only optional rear hydraulics
Wide track shoes wear faster on firm, rocky ground and give up some penetration
Smaller 195-litre fuel tank
Lighter at 9,480 kg, less mass to push with on firm ground
Pros:
Cons:
Closing Recommendation
The BEML BD50 is the simple machine for canal work, farm jobs and harder ground where a ripper helps and any mechanic can keep it running. The Komatsu D39PX-22 is built to work soft, wet and filled ground like embankments and ash dykes, where its low ground pressure keeps it from sinking, though its wide shoes wear faster on firm or rocky sites. So match the machine to your work: BEML BD50 for harder ground and remote sites, Komatsu D39PX-22 for soft, wet or filled ground where flotation matters.
Komatsu D39PX-22 Vs BEML BD50 Dozer Price, Technical Specifications & Features
The Komatsu D39PX-22 is a 9.5-tonne mini crawler dozer designed around Komatsu's wider PX track system. Its 31.0 kPa ground bearing pressure is the main feature for buyers working on soft, wet or recently filled ground. The 105 HP engine provides power for regular grading, while the 2.30 m³ blade handles smaller material-moving work. There is no ripper option on this configuration, keeping the machine focused on pushing and grading. A narrow 2,980 mm blade is available where tighter working widths are required. Ground clearance is 385 mm, and the 195-litre fuel tank supports a typical working shift. The wider track arrangement gives this dozer machine a different purpose from the D39EX-22. Contractors dealing with drainage, landscaping or filled areas can benefit from the lower ground pressure. The Komatsu D39PX-22 bulldozer price is ₹55 lakh to ₹65 lakh. Rental operators can consider it when flotation is more important than ripping capability. Its compact operating weight keeps it useful on smaller sites. Buyers comparing the two D39 models can focus on ground conditions rather than engine power alone. The D39PX-22 is therefore a practical choice for grading where lower ground pressure matters most.
The BEML BD50 is a 12.2-tonne mini crawler dozer machine designed for smaller grading and site-preparation jobs. Its compact size works well on residential plots, small commercial pads and private-estate projects. The 1.76 m³ blade moves manageable material volumes, while the 101 kN drawbar pull provides useful pushing force through compacted fill. An optional multi-shank ripper adds light breaking capability when the ground becomes harder. With 90 HP, the machine provides steady power without moving into a larger construction class. Ground bearing pressure of 71.6 kPa helps maintain stability on softer working surfaces. A 240-litre fuel tank supports a full day's work, and 350 mm of ground clearance suits regular site conditions. Angle, straight, rake and reduced-width blade options provide flexibility for different grading requirements. The BEML BD50 bulldozer price is ₹30 lakh to ₹40 lakh. Landscaping contractors can use this crawler dozer for controlled grading and preparation work. Small civil contractors can also consider it where a larger dozer would require unnecessary working space. Its compact operating weight makes movement between smaller sites more manageable. For buyers entering crawler dozer ownership, the BD50 offers a practical machine for regular local earthmoving and preparation work.
Agency review
Planning to buy the Komatsu D39PX-22 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the BEML BD50 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
BEML BD50 vs Komatsu D39PX-22: which mini dozer fits your ground conditions?
The BEML BD50 is the simple, mechanical machine. It has a hand-shifted gearbox and an angle blade, built in India by BEML, and it can take an optional ripper for harder ground. The Komatsu D39PX-22 is the low-ground-pressure specialist. Its wide 635 mm track shoes spread the load, so its ground bearing pressure is far lower than the BD50's, letting it work fresh fill, ash ponds and wet clay where standard dozers sink. It also carries a bigger 2.30 m³ blade and turns in a tighter radius, but it has no ripper option, running only rear hydraulics instead.
Choose by your ground, not just the brand. For canal work, farm jobs and harder ground where a ripper helps break up rock, the BD50 is the easier fit, and any mechanic can keep it running. For soft, wet or filled ground like embankments, ash dykes and land reclamation, the D39PX-22's wide-track flotation is the reason to buy it, though its wide shoes wear faster on firm, rocky ground. Both are mini dozers in our dozer range. New to dozers? Read the bulldozer guide first.
BEML BD50
Pros:
Hand-shifted gearbox with no electronics, easy to repair with ordinary tools anywhere
Optional multi-shank ripper for harder ground
Made in India by BEML, with a parts network built for remote sites
Larger fuel tank at 240 litres
Cons:
Higher ground bearing pressure at 71.6 kPa, sinks more on soft ground than the D39PX-22
Smaller blade at 1.76 m³ than the D39PX-22's 2.30 m³
Wider turning radius than the D39PX-22
Canopy only, no cabin and no AC option
Komatsu D39PX-22
Pros:
Very low ground bearing pressure at 31.0 kPa on wide 635 mm track shoes, floats over soft ground
Bigger blade at 2.30 m³
Tighter turning radius at 2,400 mm
Optional ROPS cab with AC and heater
Cons:
No ripper option, only optional rear hydraulics
Wide track shoes wear faster on firm, rocky ground and give up some penetration
Smaller 195-litre fuel tank
Lighter at 9,480 kg, less mass to push with on firm ground
Pros:
Cons:
Closing Recommendation
The BEML BD50 is the simple machine for canal work, farm jobs and harder ground where a ripper helps and any mechanic can keep it running. The Komatsu D39PX-22 is built to work soft, wet and filled ground like embankments and ash dykes, where its low ground pressure keeps it from sinking, though its wide shoes wear faster on firm or rocky sites. So match the machine to your work: BEML BD50 for harder ground and remote sites, Komatsu D39PX-22 for soft, wet or filled ground where flotation matters.
Komatsu D39PX-22 Vs BEML BD50 Dozer Price, Technical Specifications & Features
The Komatsu D39PX-22 is a 9.5-tonne mini crawler dozer designed around Komatsu's wider PX track system. Its 31.0 kPa ground bearing pressure is the main feature for buyers working on soft, wet or recently filled ground. The 105 HP engine provides power for regular grading, while the 2.30 m³ blade handles smaller material-moving work. There is no ripper option on this configuration, keeping the machine focused on pushing and grading. A narrow 2,980 mm blade is available where tighter working widths are required. Ground clearance is 385 mm, and the 195-litre fuel tank supports a typical working shift. The wider track arrangement gives this dozer machine a different purpose from the D39EX-22. Contractors dealing with drainage, landscaping or filled areas can benefit from the lower ground pressure. The Komatsu D39PX-22 bulldozer price is ₹55 lakh to ₹65 lakh. Rental operators can consider it when flotation is more important than ripping capability. Its compact operating weight keeps it useful on smaller sites. Buyers comparing the two D39 models can focus on ground conditions rather than engine power alone. The D39PX-22 is therefore a practical choice for grading where lower ground pressure matters most.
The BEML BD50 is a 12.2-tonne mini crawler dozer machine designed for smaller grading and site-preparation jobs. Its compact size works well on residential plots, small commercial pads and private-estate projects. The 1.76 m³ blade moves manageable material volumes, while the 101 kN drawbar pull provides useful pushing force through compacted fill. An optional multi-shank ripper adds light breaking capability when the ground becomes harder. With 90 HP, the machine provides steady power without moving into a larger construction class. Ground bearing pressure of 71.6 kPa helps maintain stability on softer working surfaces. A 240-litre fuel tank supports a full day's work, and 350 mm of ground clearance suits regular site conditions. Angle, straight, rake and reduced-width blade options provide flexibility for different grading requirements. The BEML BD50 bulldozer price is ₹30 lakh to ₹40 lakh. Landscaping contractors can use this crawler dozer for controlled grading and preparation work. Small civil contractors can also consider it where a larger dozer would require unnecessary working space. Its compact operating weight makes movement between smaller sites more manageable. For buyers entering crawler dozer ownership, the BD50 offers a practical machine for regular local earthmoving and preparation work.
73 differ · 4 identical
Key highlights: Komatsu D39PX-22 vs BEML BD50 Dozer
Komatsu D39PX-22
BEML BD50
Engine Make
Komatsu SAA4D107E-1
BEML BS6D105-1
Rated Engine Power
79 kW (105 HP) @ 2200 rpm
67 kW (90 HP) @ 1750 rpm
Maximum Torque
NA
466 Nm @ 1100 rpm
Max Forward Speed
8.5 km/h
9.4 km/h
Max Drawbar Pull
NA
101 kN
Fuel Tank
195 L
240 L
Overall Width
3250 mm
3350 mm
Track Shoe Width
635 mm
400 mm
Ground Bearing Pressure
31.0 kPa (with dozer + ROPS cab)
71.6 kPa (tractor only)
Blade Options
980 mm blade optional, PAT std; narrow 2
Angle, Rake, Reduced-width, Straight
Ripper
Rear hydraulics optional; no ripper for PX
Multi-shank ripper (optional)
AC Cabin
Optional (ROPS cab with AC + heater)
Not offered (canopy)
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Key highlights: Komatsu D39PX-22 vs BEML BD50 Dozer
Komatsu D39PX-22
BEML BD50
Engine Make
Komatsu SAA4D107E-1
BEML BS6D105-1
Rated Engine Power
79 kW (105 HP) @ 2200 rpm
67 kW (90 HP) @ 1750 rpm
Maximum Torque
NA
466 Nm @ 1100 rpm
Max Forward Speed
8.5 km/h
9.4 km/h
Max Drawbar Pull
NA
101 kN
Fuel Tank
195 L
240 L
Overall Width
3250 mm
3350 mm
Track Shoe Width
635 mm
400 mm
Ground Bearing Pressure
31.0 kPa (with dozer + ROPS cab)
71.6 kPa (tractor only)
Blade Options
980 mm blade optional, PAT std; narrow 2
Angle, Rake, Reduced-width, Straight
Ripper
Rear hydraulics optional; no ripper for PX
Multi-shank ripper (optional)
AC Cabin
Optional (ROPS cab with AC + heater)
Not offered (canopy)
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Full specifications: Komatsu D39PX-22 vs BEML BD50 Dozer
Questions buyers ask about the Komatsu D39PX-22 vs BEML BD50
Ans.
The Komatsu D39PX-22 sinks far less. Its ground bearing pressure is 31.0 kPa against 71.6 kPa on the BD50, and its track shoes are much wider at 635 mm against 400 mm. That is what lets it work fresh fill, ash ponds and wet clay.
Ans.
The BEML BD50 can take a ripper. It offers an optional multi-shank ripper for breaking up harder ground. The Komatsu D39PX-22 has no ripper option at all, only optional rear hydraulics.
Ans.
The BEML BD50 is the easier one. It has a hand-shifted gearbox and no electronics, so a normal workshop can strip and rebuild most of it with ordinary tools. The Komatsu D39PX-22 needs trained dealer hands for its hydrostatic drive.
Ans.
The Komatsu D39PX-22 turns tighter. Its minimum turning radius is 2,400 mm against 2,700 mm on the BD50. That helps in tight corners and small plots.
Ans.
The Komatsu D39PX-22 wears out faster on firm or rocky ground. Its wide track shoes are built for flotation on soft ground, and they wear quicker on rock or abrasive surfaces, giving up some penetration too. On mostly firm ground, the BD50 is the better-matched machine.
Komatsu D39PX-22 Vs BEML BD50 - Compare Price & Availability Across 600+ Locations in India
Compare Komatsu D39PX-22 Vs BEML BD50 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
