Komatsu GD555 vs Mahindra G9075: the two differ on 73 of 79 listed specs. The main differences are Engine (Komatsu 196 HP vs Mahindra 74 HP), Price (₹ 1.1-1.40 Crore vs ₹ 35-38 Lakhs), Max Torque (880 Nm @ 1450 rpm vs 345 Nm @ 1200-1500 RPM), Weight (15135 kg vs 8848 kg). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Komatsu GD555
Mahindra G9075
Komatsu GD555
VS
Mahindra G9075
Motor Grader
Komatsu GD555 vs Mahindra G9075: the two differ on 73 of 79 listed specs. The main differences are Engine (Komatsu 196 HP vs Mahindra 74 HP), Price (₹ 1.1-1.40 Crore vs ₹ 35-38 Lakhs), Max Torque (880 Nm @ 1450 rpm vs 345 Nm @ 1200-1500 RPM), Weight (15135 kg vs 8848 kg). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
Komatsu GD555
₹ 1.1-1.40 Crore
Mahindra G9075
₹ 35-38 Lakhs
Particulars
Komatsu GD555
Mahindra G9075
Komatsu GD555 vs Mahindra G9075: which motor grader to buy
The Komatsu GD555 brings a much stronger engine, a wider blade and an AC cabin fitted as standard, built for demanding terrain and large-scale projects. The Mahindra G9075 is smaller, lighter on fuel and comes with GPS as standard, suited to urban and rural grading where running cost matters more than raw power.
A contractor working demanding terrain on large projects will benefit from the GD555's extra power through Komatsu dealer support. A contractor prioritising fuel economy and built-in tracking for moderate assignments will prefer the G9075 through Mahindra service. Compare both against the full motor grader range and the motor grader buying guide.
Komatsu GD555 Motor Grader
Pros:
Higher engine power of 196 HP offers robust performance
Wide blade length of 3710 mm for efficient grading on large surfaces
Higher forward speed of 44.3 km/hr increases work efficiency
Smaller turning radius of 7300 mm for better maneuverability
AC cabin standard for operator comfort
Cons:
Higher gross vehicle weight may require stronger transport logistics
GPS not available, limiting navigation and tracking capabilities
Longer length could be challenging for maneuvering in tight spaces
Mahindra RoadMaster G9075 Motor Grader
Pros:
Exceptional fuel economy suitable for urban and rural settings
GPS standard provides advanced navigation and tracking
Smaller size and lighter weight can offer better handling in constrained areas
Cons:
Lower engine power of 74 HP could affect performance in demanding conditions
Smaller blade length of 2600 mm may limit productivity on larger projects
No AC cabin, which might impact operator comfort in extreme weather conditions
Pros:
Cons:
Closing Recommendation
Both graders get the job done, so weigh terrain difficulty and project scale against your running budget before deciding. Demanding terrain and large-scale projects call for the Komatsu's extra power and comfort features, while moderate assignments with a focus on fuel economy and tracking suit the Mahindra better. So match the machine to your work: Komatsu GD555 for demanding terrain and large projects, Mahindra G9075 for fuel-efficient, GPS-tracked grading on moderate jobs.
Komatsu GD555 Vs Mahindra G9075 Motor Grader Price, Technical Specifications & Features
The Komatsu GD555 Motor Grader is a versatile machine in India for road construction and infrastructure projects. Built for contractors managing highways and medium to heavy workloads, this grader machine offers trusted performance across different applications. It is powered by a 193 to 196 HP engine that provides strong output for demanding conditions. Its design improves fuel efficiency while maintaining consistent productivity. The power shift transmission allows smooth gear changes and better control. A 3.71-meter moldboard enables quicker grading and reduces project time, boosting efficiency on various terrains. Load-sensing hydraulics ensure accurate blade movement for better surface quality. KOMTRAX technology allows real-time monitoring and maintenance planning. The Komatsu GD555 motor grader price in India ranges from ₹1.1 to ₹1.4 crore. This machine Komatsu Construction Equipment is a solid choice for buyers wanting efficient, performance-driven road construction equipment.
Mahindra RoadMaster G9075 motor grader ensures exceptional fuel economy and performance, making this Mahindra motor grader ideal for both urban and rural grading applications.
Komatsu GD555 vs Mahindra G9075: which motor grader to buy
The Komatsu GD555 brings a much stronger engine, a wider blade and an AC cabin fitted as standard, built for demanding terrain and large-scale projects. The Mahindra G9075 is smaller, lighter on fuel and comes with GPS as standard, suited to urban and rural grading where running cost matters more than raw power.
A contractor working demanding terrain on large projects will benefit from the GD555's extra power through Komatsu dealer support. A contractor prioritising fuel economy and built-in tracking for moderate assignments will prefer the G9075 through Mahindra service. Compare both against the full motor grader range and the motor grader buying guide.
Komatsu GD555 Motor Grader
Pros:
Higher engine power of 196 HP offers robust performance
Wide blade length of 3710 mm for efficient grading on large surfaces
Higher forward speed of 44.3 km/hr increases work efficiency
Smaller turning radius of 7300 mm for better maneuverability
AC cabin standard for operator comfort
Cons:
Higher gross vehicle weight may require stronger transport logistics
GPS not available, limiting navigation and tracking capabilities
Longer length could be challenging for maneuvering in tight spaces
Mahindra RoadMaster G9075 Motor Grader
Pros:
Exceptional fuel economy suitable for urban and rural settings
GPS standard provides advanced navigation and tracking
Smaller size and lighter weight can offer better handling in constrained areas
Cons:
Lower engine power of 74 HP could affect performance in demanding conditions
Smaller blade length of 2600 mm may limit productivity on larger projects
No AC cabin, which might impact operator comfort in extreme weather conditions
Pros:
Cons:
Closing Recommendation
Both graders get the job done, so weigh terrain difficulty and project scale against your running budget before deciding. Demanding terrain and large-scale projects call for the Komatsu's extra power and comfort features, while moderate assignments with a focus on fuel economy and tracking suit the Mahindra better. So match the machine to your work: Komatsu GD555 for demanding terrain and large projects, Mahindra G9075 for fuel-efficient, GPS-tracked grading on moderate jobs.
Komatsu GD555 Vs Mahindra G9075 Motor Grader Price, Technical Specifications & Features
The Komatsu GD555 Motor Grader is a versatile machine in India for road construction and infrastructure projects. Built for contractors managing highways and medium to heavy workloads, this grader machine offers trusted performance across different applications. It is powered by a 193 to 196 HP engine that provides strong output for demanding conditions. Its design improves fuel efficiency while maintaining consistent productivity. The power shift transmission allows smooth gear changes and better control. A 3.71-meter moldboard enables quicker grading and reduces project time, boosting efficiency on various terrains. Load-sensing hydraulics ensure accurate blade movement for better surface quality. KOMTRAX technology allows real-time monitoring and maintenance planning. The Komatsu GD555 motor grader price in India ranges from ₹1.1 to ₹1.4 crore. This machine Komatsu Construction Equipment is a solid choice for buyers wanting efficient, performance-driven road construction equipment.
Mahindra RoadMaster G9075 motor grader ensures exceptional fuel economy and performance, making this Mahindra motor grader ideal for both urban and rural grading applications.
73 differ · 6 identical
Key highlights: Komatsu GD555 vs Mahindra G9075 Motor Grader
Komatsu GD555
Mahindra G9075
Engine Make
Komatsu SAA6D107E-1
Mahindra BS TREM IV CEV
Max Torque
880 Nm @ 1450 rpm
345 Nm @ 1200-1500 RPM
Fuel Tank
416 L
100 L
Hydraulic System
69 L
50 L
Tires
14.00-24; tubeless
13 x 24-12 PR
Frame Height
300 mm
NA
Max Lift Above Ground
480 mm
395 mm
Max Cutting Depth
615 mm
300 mm
Blade Pitch Angle
40° forward; 5° backward
40° forward; 5° backward
Wheel Base
6270 mm
5225 mm
Overall Length
10365 mm
8594 mm
Overall Height
3200 mm
3290 mm
Warranty
1 Yr. / 3000 hr.
1 Year
AC Cabin
Standard
Not Available
GPS
Not Available
Standard
Key highlights: Komatsu GD555 vs Mahindra G9075 Motor Grader
Komatsu GD555
Mahindra G9075
Engine Make
Komatsu SAA6D107E-1
Mahindra BS TREM IV CEV
Max Torque
880 Nm @ 1450 rpm
345 Nm @ 1200-1500 RPM
Fuel Tank
416 L
100 L
Hydraulic System
69 L
50 L
Tires
14.00-24; tubeless
13 x 24-12 PR
Frame Height
300 mm
NA
Max Lift Above Ground
480 mm
395 mm
Max Cutting Depth
615 mm
300 mm
Blade Pitch Angle
40° forward; 5° backward
40° forward; 5° backward
Wheel Base
6270 mm
5225 mm
Overall Length
10365 mm
8594 mm
Overall Height
3200 mm
3290 mm
Warranty
1 Yr. / 3000 hr.
1 Year
AC Cabin
Standard
Not Available
GPS
Not Available
Standard
Full specifications: Komatsu GD555 vs Mahindra G9075 Motor Grader
Engine
Komatsu GD555
Mahindra G9075
Model
Komatsu 196 HP
Mahindra 74 HP
Fuel
Diesel
Diesel
Type
Water-cooled; 4-cycle; direct injection; Turbocharged and air to air aftercooled
Water Cooled; Turbo Charged
Gross Power
196 HP (146 kW) @2000 rpm
74 HP (55 kW) @ 2200 RPM
Number Of Cylinders
6
4
Max Torque
880 Nm @ 1450 rpm
345 Nm @ 1200-1500 RPM
Displacement
6.69 L
3.532 L
Battery
2 x 12V / 88Ah
12V; 100 Ah
Alternator
24V / 60A
12V / 90 A
Transmission
Komatsu GD555
Mahindra G9075
Type
Full power shift transmission with integral free wheeling stator torque converter and lock-up.
Carraro 4WD Transmission
Speed
Komatsu GD555
Mahindra G9075
Max. Forward Speed
44.3 km/hr
36.5 km/hr
Max. Reverse Speed
30.6 km/hr
10.5 km/hr
Axles
Komatsu GD555
Mahindra G9075
Rear Axle
Alloy steel; heat treated; full floating axle with lock/unlock differential
Driven; Non Steerable; Central Pivoted
Front Axle
Solid bar construction welded steel sections
Non-driven; Streerable Central Pivoted
Tyres
Komatsu GD555
Mahindra G9075
Size
14.00-24; tubeless
13 x 24-12 PR
Steering
Komatsu GD555
Mahindra G9075
Type
Hydraulic power steering providing stopped engine steering meeting SAE J53 and J1151
Power Steering
Minimum Turning Radius
7300 mm
10000 mm
Steering-Angle
49°
45°
Brakes
Komatsu GD555
Mahindra G9075
Service
Foot operated; sealed oil disc brakes; hydraulically actuated on four tandem wheels; 13691 cm² total braking surface
Foot operated hydraulically actuated oil immersed disc in the middle axle.
Parking
Manually actuated; spring applied; hydraulically released caliper
Hand operated; mechanically actuated caliper brakes on the middle axle.
Frame
Komatsu GD555
Mahindra G9075
Front Frame Height
300 mm
NA
Front Frame Width
300 mm
NA
Front Frame Thickness
12 mm
NA
MoldBoard
Komatsu GD555
Mahindra G9075
Type
Hydraulic power shift fabricated from high carbon steel. Includes replaceable metal wear inserts; cutting edge and end bits. Cutting edge and end bits are hardened.
NA
Blade Length
3710 mm
2600 mm
Blade Height
645 mm
516 mm
Blade Thickness
19 mm
16 mm
Cutting Edge
152 x 16 mm
152 x 16
Blade Pull
NA
NA
Blade Down Pressure
NA
NA
Moldboard Side Shift (Right/Left)
820 mm / 820 mm
513 mm
Maximum Shoulder Reach (Right/Left)
2000 mm / 1960 mm
489.5 mm
Maximum Lift Above Ground
480 mm
395 mm
Maximum Cutting Depth
615 mm
300 mm
Blade Pitch Angle
40° forward; 5° backward
40° forward; 5° backward
Hydraulics
Komatsu GD555
Mahindra G9075
Type
Load-sensing closed center hydraulics with variable displacement piston pump.
Open Center - Fixed Displacement Tandem Gear Pump
Maximum Pump Flow
200 L/min
108 L/min
Maximum System Pressure
20.6 MPa
20 MPa
Service Capacities
Komatsu GD555
Mahindra G9075
Fuel Tank
416 L
100 L
Cooling System
24.9 L
17 L
Engine Oil
23.1 L
13.5 L
DEF Tank
NA
NA
Trasnsmission Oil
45 L
16 L
Final Drive
17 L
NA
Hydraulic System
69 L
50 L
Circle Reverse Housing
7 L
NA
Weight
Komatsu GD555
Mahindra G9075
Gross Vehicle Weight
15135 kg
8848 kg
Moldboard Base
2380 mm
1691 mm
Wheelbase
6270 mm
5225 mm
Tandem Wheelbase
1525 mm
1850 mm
Width of Standard Moldboard
3710 mm
2600 mm
Overall Length
10365 mm
8594 mm
Tread Gauge
2060 mm
NA
Width of Tires
2485 mm
NA
Articulation, left or right
25°
NA
Minimum Ground Clearence
620 mm
467 mm
Full specifications: Komatsu GD555 vs Mahindra G9075 Motor Grader
Engine
Komatsu GD555
Mahindra G9075
Model
Komatsu 196 HP
Mahindra 74 HP
Fuel
Diesel
Diesel
Type
Water-cooled; 4-cycle; direct injection; Turbocharged and air to air aftercooled
Water Cooled; Turbo Charged
Gross Power
196 HP (146 kW) @2000 rpm
74 HP (55 kW) @ 2200 RPM
Number Of Cylinders
6
4
Max Torque
880 Nm @ 1450 rpm
345 Nm @ 1200-1500 RPM
Displacement
6.69 L
3.532 L
Battery
2 x 12V / 88Ah
12V; 100 Ah
Alternator
24V / 60A
12V / 90 A
Speed
Komatsu GD555
Mahindra G9075
Max. Forward Speed
44.3 km/hr
36.5 km/hr
Max. Reverse Speed
30.6 km/hr
10.5 km/hr
Axles
Komatsu GD555
Mahindra G9075
Rear Axle
Alloy steel; heat treated; full floating axle with lock/unlock differential
Driven; Non Steerable; Central Pivoted
Front Axle
Solid bar construction welded steel sections
Non-driven; Streerable Central Pivoted
Tyres
Komatsu GD555
Mahindra G9075
Size
14.00-24; tubeless
13 x 24-12 PR
Steering
Komatsu GD555
Mahindra G9075
Type
Hydraulic power steering providing stopped engine steering meeting SAE J53 and J1151
Power Steering
Minimum Turning Radius
7300 mm
10000 mm
Steering-Angle
49°
45°
Brakes
Komatsu GD555
Mahindra G9075
Service
Foot operated; sealed oil disc brakes; hydraulically actuated on four tandem wheels; 13691 cm² total braking surface
Foot operated hydraulically actuated oil immersed disc in the middle axle.
Parking
Manually actuated; spring applied; hydraulically released caliper
Hand operated; mechanically actuated caliper brakes on the middle axle.
Frame
Komatsu GD555
Mahindra G9075
Front Frame Height
300 mm
NA
Front Frame Width
300 mm
NA
Front Frame Thickness
12 mm
NA
Moldboard
Komatsu GD555
Mahindra G9075
Type
Hydraulic power shift fabricated from high carbon steel. Includes replaceable metal wear inserts; cutting edge and end bits. Cutting edge and end bits are hardened.
NA
Blade Length
3710 mm
2600 mm
Blade Height
645 mm
516 mm
Blade Thickness
19 mm
16 mm
Cutting Edge
152 x 16 mm
152 x 16
Blade Pull
NA
NA
Blade Down Pressure
NA
NA
Moldboard Side Shift (Right/Left)
820 mm / 820 mm
513 mm
Maximum Shoulder Reach (Right/Left)
2000 mm / 1960 mm
489.5 mm
Maximum Lift Above Ground
480 mm
395 mm
Maximum Cutting Depth
615 mm
300 mm
Blade Pitch Angle
40° forward; 5° backward
40° forward; 5° backward
Hydraulics
Komatsu GD555
Mahindra G9075
Type
Load-sensing closed center hydraulics with variable displacement piston pump.
Questions buyers ask about the Komatsu GD555 vs Mahindra G9075
Ans.
The Komatsu GD555 is better for demanding terrain because of its higher engine power and wider blade for large surfaces. It handles tougher ground more comfortably than the lighter G9075.
Ans.
The Mahindra G9075 is more fuel-efficient for everyday work thanks to its smaller, economical engine. This suits contractors handling regular urban and rural grading on a tighter running budget.
Ans.
No, GPS is not listed as available on the Komatsu GD555 in this comparison, while the Mahindra G9075 includes GPS as standard. If tracking matters to your fleet, factor this into your decision.
Ans.
The Komatsu GD555 keeps the driver more comfortable with its standard AC cabin, useful on long shifts in hot conditions. The Mahindra G9075 does not include an AC cabin in this comparison.
Ans.
The Mahindra G9075 is easier to manoeuvre on smaller sites because of its lighter build and smaller size. The Komatsu GD555's larger frame suits open, large-scale project areas better.
Komatsu GD555 Vs Mahindra G9075 - Compare Price & Availability Across 600+ Locations in India
Compare Komatsu GD555 Vs Mahindra G9075 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
