Mahindra G9075 vs Fine FMG 585HD: the two differ on 66 of 79 listed specs. The main differences are Engine (Mahindra 74 HP vs Ashok Leyland 130 HP), Price (₹ 35-38 Lakhs vs ₹ 40-50 Lakhs), Max Torque (345 Nm @ 1200-1500 RPM vs 480 Nm @ 1500 rpm), Weight (8848 kg vs 9495 kg). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Mahindra G9075
Fine FMG 585HD
Mahindra G9075
VS
Fine FMG 585HD
Motor Grader
Mahindra G9075 vs Fine FMG 585HD: the two differ on 66 of 79 listed specs. The main differences are Engine (Mahindra 74 HP vs Ashok Leyland 130 HP), Price (₹ 35-38 Lakhs vs ₹ 40-50 Lakhs), Max Torque (345 Nm @ 1200-1500 RPM vs 480 Nm @ 1500 rpm), Weight (8848 kg vs 9495 kg). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
Mahindra G9075
₹ 35-38 Lakhs
Fine FMG 585HD
₹ 40-50 Lakhs
Particulars
Mahindra G9075
Fine FMG 585HD
Fine FMG 585HD vs Mahindra G9075: Which One to Buy?
The Fine FMG 585HD runs a stronger 130 HP engine and a longer blade, so it pushes through tougher, heavier grading work. The Mahindra G9075 is lighter and quicker on the road, with GPS built in and higher ground clearance for rough terrain. If raw pushing power and blade width matter most, the Fine wins. If you want built-in tracking and easier travel over rough ground, the Mahindra fits better.
Contractors doing heavy highway or large earthworks jobs, where blade width and grading power matter most, will get more from the Fine range. Municipal buyers and rural road crews who value GPS tracking and better ground clearance for uneven terrain may prefer the Mahindra lineup. Check the full motor grader range and read the motor grader buying guide to match blade size and speed to the roads you actually work on.
Fine FMG 585HD
Pros:
Delivers high torque and fuel efficiency
Stable with precise control
Offers comfort and reliability for construction tasks
Equipped with a powerful Ashok Leyland 130 HP engine
Longer blade length of 3050 mm
Higher maximum forward and reverse speed of 20 km/hr and 19 km/hr, respectively
Better minimum turning radius of 9000 mm
Cons:
Lower engine power compared to Mahindra G9075
Optional AC Cabin
No specified GPS system
High gross vehicle weight might limit maneuverability in some conditions
Mahindra G9075
Pros:
Exceptional fuel economy and versatile performance for urban and rural applications
Integrated GPS system as a standard feature
Higher ground clearance of 467 mm improves capability on rough terrain
Higher engine displacement of 3.532 L
Higher max forward speed of 36.5 km/hr
Cons:
Lower engine power at 74 HP
Shorter blade length of 2600 mm, which may limit the grading width
No available option for an AC cabin
Less pump flow capacity with 108 L/min
Pros:
Cons:
Closing Recommendation
Think about what your project needs most. If you need raw power and a wider blade for tougher grading jobs, the Fine FMG 585HD is the stronger choice. If you want good fuel economy and GPS tracking built in from the start, the Mahindra G9075 works better. So match the machine to your work: Fine FMG 585HD for heavy-duty grading jobs, Mahindra G9075 for fuel-conscious work with built-in tracking.
Mahindra G9075 Vs Fine FMG 585HD Motor Grader Price, Technical Specifications & Features
Mahindra RoadMaster G9075 motor grader ensures exceptional fuel economy and performance, making this Mahindra motor grader ideal for both urban and rural grading applications.
The Fine Equipments FMG 585HD is a compact grader machine in India designed for road construction and land development projects. It suits contractors working on small to medium infrastructure and grading projects. Powered by a 130 HP Ashok Leyland diesel engine, it delivers strong torque at low RPM for heavy-duty tasks. The fuel-efficient engine helps lower operating costs during long hours. Its 3.05-meter moldboard promotes better grading productivity with fewer passes. The load-sensing hydraulic system allows for precise blade control and quicker response. Power-shift transmission ensures smooth operation and better control on tight job sites. Articulation and steering enhance maneuverability in confined areas. The operator cabin is designed for comfort, visibility, and easy controls to boost productivity. The Fine FMG 585HD motor grader price in India is expected to range from ₹40 to ₹50 lakh. This machine from Fine Construction Equipment is a great investment for buyers wanting efficient, durable, and cost-effective grading machines.
Fine FMG 585HD vs Mahindra G9075: Which One to Buy?
The Fine FMG 585HD runs a stronger 130 HP engine and a longer blade, so it pushes through tougher, heavier grading work. The Mahindra G9075 is lighter and quicker on the road, with GPS built in and higher ground clearance for rough terrain. If raw pushing power and blade width matter most, the Fine wins. If you want built-in tracking and easier travel over rough ground, the Mahindra fits better.
Contractors doing heavy highway or large earthworks jobs, where blade width and grading power matter most, will get more from the Fine range. Municipal buyers and rural road crews who value GPS tracking and better ground clearance for uneven terrain may prefer the Mahindra lineup. Check the full motor grader range and read the motor grader buying guide to match blade size and speed to the roads you actually work on.
Fine FMG 585HD
Pros:
Delivers high torque and fuel efficiency
Stable with precise control
Offers comfort and reliability for construction tasks
Equipped with a powerful Ashok Leyland 130 HP engine
Longer blade length of 3050 mm
Higher maximum forward and reverse speed of 20 km/hr and 19 km/hr, respectively
Better minimum turning radius of 9000 mm
Cons:
Lower engine power compared to Mahindra G9075
Optional AC Cabin
No specified GPS system
High gross vehicle weight might limit maneuverability in some conditions
Mahindra G9075
Pros:
Exceptional fuel economy and versatile performance for urban and rural applications
Integrated GPS system as a standard feature
Higher ground clearance of 467 mm improves capability on rough terrain
Higher engine displacement of 3.532 L
Higher max forward speed of 36.5 km/hr
Cons:
Lower engine power at 74 HP
Shorter blade length of 2600 mm, which may limit the grading width
No available option for an AC cabin
Less pump flow capacity with 108 L/min
Pros:
Cons:
Closing Recommendation
Think about what your project needs most. If you need raw power and a wider blade for tougher grading jobs, the Fine FMG 585HD is the stronger choice. If you want good fuel economy and GPS tracking built in from the start, the Mahindra G9075 works better. So match the machine to your work: Fine FMG 585HD for heavy-duty grading jobs, Mahindra G9075 for fuel-conscious work with built-in tracking.
Mahindra G9075 Vs Fine FMG 585HD Motor Grader Price, Technical Specifications & Features
Mahindra RoadMaster G9075 motor grader ensures exceptional fuel economy and performance, making this Mahindra motor grader ideal for both urban and rural grading applications.
The Fine Equipments FMG 585HD is a compact grader machine in India designed for road construction and land development projects. It suits contractors working on small to medium infrastructure and grading projects. Powered by a 130 HP Ashok Leyland diesel engine, it delivers strong torque at low RPM for heavy-duty tasks. The fuel-efficient engine helps lower operating costs during long hours. Its 3.05-meter moldboard promotes better grading productivity with fewer passes. The load-sensing hydraulic system allows for precise blade control and quicker response. Power-shift transmission ensures smooth operation and better control on tight job sites. Articulation and steering enhance maneuverability in confined areas. The operator cabin is designed for comfort, visibility, and easy controls to boost productivity. The Fine FMG 585HD motor grader price in India is expected to range from ₹40 to ₹50 lakh. This machine from Fine Construction Equipment is a great investment for buyers wanting efficient, durable, and cost-effective grading machines.
66 differ · 13 identical
Key highlights: Mahindra G9075 vs Fine FMG 585HD Motor Grader
Mahindra G9075
Fine FMG 585HD
Engine Make
Mahindra BS TREM IV CEV
Ashok Leyland
Max Torque
345 Nm @ 1200-1500 RPM
480 Nm @ 1500 rpm
Fuel Tank
100 L
140 L
Hydraulic System
50 L
150 L
Tires
13 x 24-12 PR
11 x 20"
Frame Height
NA
NA
Max Lift Above Ground
395 mm
460 mm
Max Cutting Depth
300 mm
NA
Blade Pitch Angle
40° forward; 5° backward
40° forward; 3° backward
Wheel Base
5225 mm
5300 mm
Overall Length
8594 mm
9100 mm
Overall Height
3290 mm
3550 mm
Warranty
1 Year
1 Yr. / 1000 hr.
AC Cabin
Not Available
Optional
GPS
Standard
NA
Key highlights: Mahindra G9075 vs Fine FMG 585HD Motor Grader
Mahindra G9075
Fine FMG 585HD
Engine Make
Mahindra BS TREM IV CEV
Ashok Leyland
Max Torque
345 Nm @ 1200-1500 RPM
480 Nm @ 1500 rpm
Fuel Tank
100 L
140 L
Hydraulic System
50 L
150 L
Tires
13 x 24-12 PR
11 x 20"
Frame Height
NA
NA
Max Lift Above Ground
395 mm
460 mm
Max Cutting Depth
300 mm
NA
Blade Pitch Angle
40° forward; 5° backward
40° forward; 3° backward
Wheel Base
5225 mm
5300 mm
Overall Length
8594 mm
9100 mm
Overall Height
3290 mm
3550 mm
Warranty
1 Year
1 Yr. / 1000 hr.
AC Cabin
Not Available
Optional
GPS
Standard
NA
Full specifications: Mahindra G9075 vs Fine FMG 585HD Motor Grader
Engine
Mahindra G9075
Fine FMG 585HD
Model
Mahindra 74 HP
Ashok Leyland 130 HP
Fuel
Diesel
Diesel
Type
Water Cooled; Turbo Charged
Four Stroke; Turbocharged; Charge Air Cooled; Electronic Common Rail Direct Injection
Gross Power
74 HP (55 kW) @ 2200 RPM
130 HP (97 kW) @ 2200 rpm
Number Of Cylinders
4
4 in-line
Max Torque
345 Nm @ 1200-1500 RPM
480 Nm @ 1500 rpm
Displacement
3.532 L
3.84 L
Battery
12V; 100 Ah
12V / 180Ah
Alternator
12V / 90 A
12V / 90A
Transmission
Mahindra G9075
Fine FMG 585HD
Type
Carraro 4WD Transmission
Power-Shift Transmission
Speed
Mahindra G9075
Fine FMG 585HD
Max. Forward Speed
36.5 km/hr
20 km/hr
Max. Reverse Speed
10.5 km/hr
19 km/hr
Axles
Mahindra G9075
Fine FMG 585HD
Rear Axle
Driven; Non Steerable; Central Pivoted
Heavy-duty tandem axle with central planetary reduction with no spin differential lock. Tandem Axle with hydraulic service brake and SAHR parking brake.
Front Axle
Non-driven; Streerable Central Pivoted
Fully welded steel structure for torsional strength.
Tyres
Mahindra G9075
Fine FMG 585HD
Size
13 x 24-12 PR
11 x 20"
Steering
Mahindra G9075
Fine FMG 585HD
Type
Power Steering
Hydraulic power steering
Minimum Turning Radius
10000 mm
9000 mm
Steering-Angle
45°
45°
Brakes
Mahindra G9075
Fine FMG 585HD
Service
Foot operated hydraulically actuated oil immersed disc in the middle axle.
Foot pedal operated hydraulic brake through master cylinder.
Parking
Hand operated; mechanically actuated caliper brakes on the middle axle.
Spring Applied; Hydraulic Release Type parking brake operated through solenoid.
Frame
Mahindra G9075
Fine FMG 585HD
Front Frame Height
NA
NA
Front Frame Width
NA
NA
Front Frame Thickness
NA
NA
MoldBoard
Mahindra G9075
Fine FMG 585HD
Type
NA
NA
Blade Length
2600 mm
3050 mm
Blade Height
516 mm
494 mm
Blade Thickness
16 mm
NA
Cutting Edge
152 x 16
NA
Blade Pull
NA
NA
Blade Down Pressure
NA
NA
Moldboard Side Shift (Right/Left)
513 mm
914 mm
Maximum Shoulder Reach (Right/Left)
489.5 mm
744 mm
Maximum Lift Above Ground
395 mm
460 mm
Maximum Cutting Depth
300 mm
NA
Blade Pitch Angle
40° forward; 5° backward
40° forward; 3° backward
Hydraulics
Mahindra G9075
Fine FMG 585HD
Type
Open Center - Fixed Displacement Tandem Gear Pump
Closer Centre -Variable flow; load sensing axial piston pump with load-independent post-compensated valve with over-centre valve on all functions.
Maximum Pump Flow
108 L/min
118 L/min
Maximum System Pressure
20 MPa
22.0 MPa
Service Capacities
Mahindra G9075
Fine FMG 585HD
Fuel Tank
100 L
140 L
Cooling System
17 L
18 L
Engine Oil
13.5 L
10 L
DEF Tank
NA
NA
Trasnsmission Oil
16 L
35 L
Final Drive
NA
NA
Hydraulic System
50 L
150 L
Circle Reverse Housing
NA
5 L
Weight
Mahindra G9075
Fine FMG 585HD
Gross Vehicle Weight
8848 kg
9495 kg
Moldboard Base
1691 mm
2100 mm
Wheelbase
5225 mm
5300 mm
Tandem Wheelbase
1850 mm
1300 mm
Width of Standard Moldboard
2600 mm
3050 mm
Overall Length
8594 mm
9100 mm
Tread Gauge
NA
NA
Width of Tires
NA
2050 mm
Articulation, left or right
NA
20°
Minimum Ground Clearence
467 mm
NA
Full specifications: Mahindra G9075 vs Fine FMG 585HD Motor Grader
Engine
Mahindra G9075
Fine FMG 585HD
Model
Mahindra 74 HP
Ashok Leyland 130 HP
Fuel
Diesel
Diesel
Type
Water Cooled; Turbo Charged
Four Stroke; Turbocharged; Charge Air Cooled; Electronic Common Rail Direct Injection
Gross Power
74 HP (55 kW) @ 2200 RPM
130 HP (97 kW) @ 2200 rpm
Number Of Cylinders
4
4 in-line
Max Torque
345 Nm @ 1200-1500 RPM
480 Nm @ 1500 rpm
Displacement
3.532 L
3.84 L
Battery
12V; 100 Ah
12V / 180Ah
Alternator
12V / 90 A
12V / 90A
Speed
Mahindra G9075
Fine FMG 585HD
Max. Forward Speed
36.5 km/hr
20 km/hr
Max. Reverse Speed
10.5 km/hr
19 km/hr
Axles
Mahindra G9075
Fine FMG 585HD
Rear Axle
Driven; Non Steerable; Central Pivoted
Heavy-duty tandem axle with central planetary reduction with no spin differential lock. Tandem Axle with hydraulic service brake and SAHR parking brake.
Front Axle
Non-driven; Streerable Central Pivoted
Fully welded steel structure for torsional strength.
Tyres
Mahindra G9075
Fine FMG 585HD
Size
13 x 24-12 PR
11 x 20"
Steering
Mahindra G9075
Fine FMG 585HD
Type
Power Steering
Hydraulic power steering
Minimum Turning Radius
10000 mm
9000 mm
Steering-Angle
45°
45°
Brakes
Mahindra G9075
Fine FMG 585HD
Service
Foot operated hydraulically actuated oil immersed disc in the middle axle.
Foot pedal operated hydraulic brake through master cylinder.
Parking
Hand operated; mechanically actuated caliper brakes on the middle axle.
Spring Applied; Hydraulic Release Type parking brake operated through solenoid.
Frame
Mahindra G9075
Fine FMG 585HD
Front Frame Height
NA
NA
Front Frame Width
NA
NA
Front Frame Thickness
NA
NA
Moldboard
Mahindra G9075
Fine FMG 585HD
Type
NA
NA
Blade Length
2600 mm
3050 mm
Blade Height
516 mm
494 mm
Blade Thickness
16 mm
NA
Cutting Edge
152 x 16
NA
Blade Pull
NA
NA
Blade Down Pressure
NA
NA
Moldboard Side Shift (Right/Left)
513 mm
914 mm
Maximum Shoulder Reach (Right/Left)
489.5 mm
744 mm
Maximum Lift Above Ground
395 mm
460 mm
Maximum Cutting Depth
300 mm
NA
Blade Pitch Angle
40° forward; 5° backward
40° forward; 3° backward
Hydraulics
Mahindra G9075
Fine FMG 585HD
Type
Open Center - Fixed Displacement Tandem Gear Pump
Closer Centre -Variable flow; load sensing axial piston pump with load-independent post-compensated valve with over-centre valve on all functions.
Questions buyers ask about the Mahindra G9075 vs Fine FMG 585HD
Ans.
The Fine FMG 585HD has more engine power, at 130 HP against the Mahindra's 74 HP. This makes the Fine a better fit for pushing heavier material or grading harder ground.
Ans.
Yes, the Mahindra G9075 comes with GPS built in as standard, which helps if you want to track the machine's location and hours without adding extra parts. The Fine FMG 585HD does not include a GPS system.
Ans.
The Fine FMG 585HD has the longer blade at 3050 mm, compared to the Mahindra's 2600 mm. A longer blade covers more ground in each pass, which helps on wider roads.
Ans.
No, the Mahindra G9075 does not offer an AC cabin at all, even as an option. The Fine FMG 585HD at least offers an AC cabin as an extra, so check with your dealer if cabin comfort matters to you.
Ans.
The Mahindra G9075 has a higher top speed of 36.5 km/hr, quicker than the Fine FMG 585HD. This can help if you move the machine often between sites on public roads.
Mahindra G9075 Vs Fine FMG 585HD - Compare Price & Availability Across 600+ Locations in India
Compare Mahindra G9075 Vs Fine FMG 585HD price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
