Suno Sabki, Chuno Apni.
Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    L&T 9020 SX VS JCB 433-5 Wheel Loader

    L&T 9020 SX
    ₹ 54-56 Lakhs*

    L&T 9020 SX

    • Engine

      Cummins 140 HP

    • Bucket

      1.5 - 3.5 m³

    • Weight

      11400 kg

    • Fwd. Speed

      29 km/h

    • Dump Height

      2715 mm

    • Tripping Load

      NA
    Small (8-15 Ton)
    JCB 433-5
    Price Available Soon*

    JCB 433-5

    • Engine

      JCB 130 HP

    • Bucket

      1.5 m³

    • Weight

      10835 kg

    • Fwd. Speed

      31 km/h

    • Dump Height

      2850 mm

    • Tripping Load

      6791 kg
    Small (8-15 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights L&T 9020 SXJCB 433-5
    L&T 9020 SX VS JCB 433-5 Wheel Loader
    L&T Loader 9020 Price
    L&T 9020 SX

    ₹ 54-56 Lakhs

    JCB 433 Loader Price
    JCB 433-5

    Price Available Soon

    Particulars L&T 9020 SX JCB 433-5

    JCB 433-5 vs L&T 9020 SX: Which One to Buy?

    Both are mid-size wheel loaders built for Indian sites, and both come with GPS as standard. The tables below give the full numbers. Here is the simple difference. The L&T 9020 SX has a stronger Cummins engine with more pulling torque, a heavier build and a longer warranty in hours. The JCB 433-5 is tuned for lower fuel use, travels a little faster, and uses a load-sensing hydraulic system that sends oil only where it is needed.

    So the choice is between raw pulling power and running cost. For hard, packed material and long hours at the pile, the L&T pulls harder and its extra warranty hours give peace of mind. For yard work with a lot of moving around, and where diesel is your biggest monthly bill, the JCB usually costs less to run. See the JCB wheel loader range, the full wheel loader list, or our wheel loader guide to match the machine to your work.

    JCB 433-5 Wheel Loader

    Pros:

    • Enhanced fuel efficiency
    • Suitable for diverse Indian construction conditions
    • Turbo charged engine with an after treatment system
    • Higher engine torque of 550 Nm
    • 4-wheel drive with heavy-duty torque converter
    • Higher top forward speed of 31 km/h
    • Load-Sensing - Closed Center System for improved hydraulic performance
    • Higher payload capacity at 3396 kg
    • Comes with standard GPS
    • 1-year or 2000 hour warranty

    Cons:

    • Slightly lower maximum engine power at 130 HP
    • Hydraulic pump flow details not provided
    • Lower operating weight of 10835 kg
    • Optional AC Cabin

    L&T 9020 SX Wheel Loader

    Pros:

    • More powerful engine at 140 HP
    • Cummins engine known for reliability
    • Higher engine torque of 608 Nm
    • Articulated Type - Full-Hydraulic Power Steering for better maneuverability
    • Higher operating weight of 11400 kg may indicate sturdier construction
    • Longer warranty of 1 year or 3000 hours
    • Open-Center hydraulic system
    • Broader bucket width at 2700 mm
    • Higher payload at 3500 kg
    • Optional AC Cabin
    • Comes with standard GPS

    Cons:

    • Lower top forward speed of 29 km/h
    • Lower maximum pump flow not provided
    • Turn radius over tyres not disclosed

    Pros:

    Cons:

    Closing Recommendation

    Both loaders are made for Indian site conditions, so pick by the material you handle and the cost you watch most. Choose the L&T 9020 SX when you work hard, packed material every day, want more engine torque and a heavier build, and value the longer warranty hours. Choose the JCB 433-5 when diesel is your biggest running cost, when you move around the yard a lot and want a faster machine, and when the load-sensing hydraulics will save fuel on light cycles. Also check which brand reaches your site faster with parts. So match the machine to your work: L&T 9020 SX for heavy pulling and long warranty, JCB 433-5 for fuel saving and quick yard work.

    L&T 9020 SX Vs JCB 433-5 Wheel Loader Price, Technical Specifications & Features

    Brand L&T Komatsu Wheel loader JCB Wheel Loader
    Type Small (8-15 Ton) Small (8-15 Ton)
    Ex-Factory Price (GST incl.) ₹ 54-56 Lakhs Price Available Soon
    Engine Cummins 140 HP JCB 130 HP
    Bucket 1.5 - 3.5 m³ 1.5 m³
    Weight 11400 kg 10835 kg
    Max. Forward Speed 29 km/h 31 km/h
    Dump Height 2715 mm 2850 mm
    Tripping Load NA 6791 kg
    Quick Overview:

    The L&T 9020 SX wheel loader delivers superior performance and durability, making this wheel loader ideal for India’s infrastructure development projects.

    The JCB 433-5 wheel loader is a versatile payloader made for efficient material handling at construction and infrastructure sites. This machine from JCB Construction Equipment has a 130 HP engine that offers smooth performance, responsive hydraulics, and reliable fuel efficiency during continuous use. With a payload capacity of about 3,300 kg, this JCB wheel loader effectively balances power and agility. Its sturdy build, stable lifting ability, and operator-friendly design support consistent productivity, making it suitable for daily loading tasks in tough jobsite conditions.

    JCB 433-5 vs L&T 9020 SX: Which One to Buy?

    Both are mid-size wheel loaders built for Indian sites, and both come with GPS as standard. The tables below give the full numbers. Here is the simple difference. The L&T 9020 SX has a stronger Cummins engine with more pulling torque, a heavier build and a longer warranty in hours. The JCB 433-5 is tuned for lower fuel use, travels a little faster, and uses a load-sensing hydraulic system that sends oil only where it is needed.

    So the choice is between raw pulling power and running cost. For hard, packed material and long hours at the pile, the L&T pulls harder and its extra warranty hours give peace of mind. For yard work with a lot of moving around, and where diesel is your biggest monthly bill, the JCB usually costs less to run. See the JCB wheel loader range, the full wheel loader list, or our wheel loader guide to match the machine to your work.

    JCB 433-5 Wheel Loader

    Pros:

    • Enhanced fuel efficiency
    • Suitable for diverse Indian construction conditions
    • Turbo charged engine with an after treatment system
    • Higher engine torque of 550 Nm
    • 4-wheel drive with heavy-duty torque converter
    • Higher top forward speed of 31 km/h
    • Load-Sensing - Closed Center System for improved hydraulic performance
    • Higher payload capacity at 3396 kg
    • Comes with standard GPS
    • 1-year or 2000 hour warranty

    Cons:

    • Slightly lower maximum engine power at 130 HP
    • Hydraulic pump flow details not provided
    • Lower operating weight of 10835 kg
    • Optional AC Cabin

    L&T 9020 SX Wheel Loader

    Pros:

    • More powerful engine at 140 HP
    • Cummins engine known for reliability
    • Higher engine torque of 608 Nm
    • Articulated Type - Full-Hydraulic Power Steering for better maneuverability
    • Higher operating weight of 11400 kg may indicate sturdier construction
    • Longer warranty of 1 year or 3000 hours
    • Open-Center hydraulic system
    • Broader bucket width at 2700 mm
    • Higher payload at 3500 kg
    • Optional AC Cabin
    • Comes with standard GPS

    Cons:

    • Lower top forward speed of 29 km/h
    • Lower maximum pump flow not provided
    • Turn radius over tyres not disclosed

    Pros:

    Cons:

    Closing Recommendation

    Both loaders are made for Indian site conditions, so pick by the material you handle and the cost you watch most. Choose the L&T 9020 SX when you work hard, packed material every day, want more engine torque and a heavier build, and value the longer warranty hours. Choose the JCB 433-5 when diesel is your biggest running cost, when you move around the yard a lot and want a faster machine, and when the load-sensing hydraulics will save fuel on light cycles. Also check which brand reaches your site faster with parts. So match the machine to your work: L&T 9020 SX for heavy pulling and long warranty, JCB 433-5 for fuel saving and quick yard work.

    L&T 9020 SX Vs JCB 433-5 Wheel Loader Price, Technical Specifications & Features

    L&T 9020 SX JCB 433-5
    Brand
    L&T Komatsu Wheel loader JCB Wheel Loader
    Type
    Small (8-15 Ton) Small (8-15 Ton)
    Ex-Factory Price (GST incl.)
    ₹ 54-56 Lakhs Price Available Soon
    Engine
    Cummins 140 HP JCB 130 HP
    Bucket
    1.5 - 3.5 m³ 1.5 m³
    Weight
    11400 kg 10835 kg
    Fwd. Speed
    29 km/h 31 km/h
    Dump Height
    2715 mm 2850 mm
    Tripping Load
    NA 6791 kg
    Quick Overview:

    The L&T 9020 SX wheel loader delivers superior performance and durability, making this wheel loader ideal for India’s infrastructure development projects.

    The JCB 433-5 wheel loader is a versatile payloader made for efficient material handling at construction and infrastructure sites. This machine from JCB Construction Equipment has a 130 HP engine that offers smooth performance, responsive hydraulics, and reliable fuel efficiency during continuous use. With a payload capacity of about 3,300 kg, this JCB wheel loader effectively balances power and agility. Its sturdy build, stable lifting ability, and operator-friendly design support consistent productivity, making it suitable for daily loading tasks in tough jobsite conditions.

    L&T 9020 SX Vs JCB 433-5 Wheel Loader Key Highlights

    L&T 9020 SX JCB 433-5
    Engine Make Cummins -QS B4.5 CIV140D222 JCB ecoMAX 448
    Max Torque 608 Nm @ 1500 rpm 550 Nm @ 1500 rpm
    Fuel Tank 198 L 210 L
    Hydraulic System NA 164 L/min @ 2200 rpm
    Min. Ground Clearance 410 mm 398 mm
    Payload 3500 kg 3396 kg
    Steering Angle ±40° ±40°
    Drive Type 4-wheel drive (4WD) 4-wheel drive (4WD)
    Wheelbase 2800 mm 3000 mm
    Tyres 14.00x25-L3-20PR 14 x 25(20PR) E3/L3 (BKT/CEAT)
    Max. Breakout Force 113.5 kN 116 kN
    Overall Length 7480 mm 7450 mm
    Warranty 1 Yr. / 3000 hr. 1 Yr. / 2000 hr.
    AC Cabin Optional Optional
    GPS Standard Standard

    L&T 9020 SX Vs JCB 433-5 Wheel Loader Key Highlights

    L&T 9020 SX JCB 433-5
    Engine Make
    Cummins -QS B4.5 CIV140D222 JCB ecoMAX 448
    Max Torque
    608 Nm @ 1500 rpm 550 Nm @ 1500 rpm
    Fuel Tank
    198 L 210 L
    Hydraulic System
    NA 164 L/min @ 2200 rpm
    Min. Ground Clearance
    410 mm 398 mm
    Payload
    3500 kg 3396 kg
    Steering Angle
    ±40° ±40°
    Drive Type
    4-wheel drive (4WD) 4-wheel drive (4WD)
    Wheelbase
    2800 mm 3000 mm
    Tyres
    14.00x25-L3-20PR 14 x 25(20PR) E3/L3 (BKT/CEAT)
    Max. Breakout Force
    113.5 kN 116 kN
    Overall Length
    7480 mm 7450 mm
    Warranty
    1 Yr. / 3000 hr. 1 Yr. / 2000 hr.
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    L&T 9020 SX Vs JCB 433-5 Wheel Loader Specifications

    Engine

    L&T 9020 SX JCB 433-5
    Engine Make Cummins -QS B4.5 CIV140D222 JCB ecoMAX 448
    Engine Type 4 Stroke; Liquid cooled; common rail direct injection with turbo charger 4 stroke; direct injection; Water cooled; Turbo charged; after cooler with after treatment system
    Aspiration Turbocharged Water cooled and Turbo charged
    Emission CEV Stage IV Stage 5
    Max Torque 608 Nm @ 1500 rpm 550 Nm @ 1500 rpm
    Max Power 140 HP (104.4 kW) @ 2200 rpm 130 HP (97 kW) @ 2200 rpm
    Piston Displacement 4.458 L 4.8 L
    No Of Cylinders 4 Cylinders 4 Cylinders
    Battery NA 2 x 12V / 110Ah
    Alternator NA 28V /100A

    Power Train

    L&T 9020 SX JCB 433-5
    Transmission Powershift Transmission Fully Automatic Powershift Transmission
    Drive Type 4-wheel drive (4WD) 4-wheel drive (4WD)
    Torque Converter Avtec TT270 Single-stage; single-phase; heavy-duty torque converter

    Brakes

    L&T 9020 SX JCB 433-5
    Service 4 Wheel oil immersed wet multi disc brake fitted at planetary hub. Hydraulic wet disc service brake; spring-applied transmission-mounted parking brake.
    Parking Internal expanding shoe type fitted on transmission at output to front axle. Spring-applied; hydraulically released (SAHR) disc brake

    Steering System

    L&T 9020 SX JCB 433-5
    Type Articulated Type - Full-Hydraulic Power Steering Hydrostatic Power Steering with a Priority Valve
    Steering-Angle ±40° ±40°

    Axles And Final Drive

    L&T 9020 SX JCB 433-5
    Front Axle Fixed type with a 45% limited slip differential Heavy-duty planetary with LSD.
    Rear Axle Standard differential Oscillating planetary - LSD optional.
    Oscillating Angle ±12° ±12°

    Speed

    L&T 9020 SX JCB 433-5
    Max. Forward Speed 29 km/h 31 km/h
    Max. Reverse Speed 14.6 km/h 21 km/h

    Hydraulic System

    L&T 9020 SX JCB 433-5
    System Type Open-Center Load-Sensing - Closed Center System
    Pump Type Tandem Gear Pump Variable Displacement Axial Piston Pump
    Maximum Pump Flow NA 164 L/min @ 2200 rpm
    System Pressure 245 bar 250 bar

    Special Refill Capacities

    L&T 9020 SX JCB 433-5
    Fuel Tank 198 L 210 L
    Hydraulic System 110 L 115 L
    Engine Oil 17 L 14 L
    Cooling System 25 L 24 L
    Rear Axle Oil 28 L 18 L
    Front Axle Oil 28 L 18 L
    Hydraulic Tank 90 L NA
    Transmission Oil 38 L 21 L
    Def Tank 24 L 23.1 L

    Dimensions

    L&T 9020 SX JCB 433-5
    Overall Length With Bucket 7480 mm 7450 mm
    Wheel Base 2800 mm 3000 mm
    Height Over Cab 3276 mm 3270 mm
    Height Over Exhaust 2910 mm 2810 mm
    Min Grond Clearance 410 mm 398 mm
    Width Over Tyres 2325 mm 2230 mm
    Wheel Tread 1920 mm 2230 mm
    Tyre Size 14.00x25-L3-20PR 14 x 25(20PR) E3/L3 (BKT/CEAT)

    Performance

    L&T 9020 SX JCB 433-5
    Bucket Capacity 1.5 - 3.5 m³ 1.5 m³
    Bucket Width 2700 mm 2350 mm
    Payload 3500 kg 3396 kg
    Tipping Load Straight NA 7687 kg
    Tipping Load Full Turn NA 6791 kg
    Max. Breakout Force 113.5 kN 116 kN
    Operating Weight 11400 kg 10835 kg
    Max Dump Angle 50° 43.3°
    Bucket Roll Back Angle Full Height 55° 52.3°
    Bucket Roll Back At Carry 53° 42.3°
    Bucket Roll Back At Ground Level 47° 38.3°
    Dumping Height, Fully Raised 2715 mm 2850 mm
    Dumping Reach, Fully Raised 1248 mm 1140 mm
    Max. Hinge Pin Height 3810 mm 3850 mm
    Max. Digging Depth 100 mm 48 mm
    Turning Radius Over Tyres NA 5230 mm
    Turning Radius Over Bucket 5829 mm 5790 mm

    L&T 9020 SX Vs JCB 433-5 Wheel Loader Specifications

    Engine

    L&T 9020 SX JCB 433-5
    Engine Make
    Cummins -QS B4.5 CIV140D222 JCB ecoMAX 448
    Engine Type
    4 Stroke; Liquid cooled; common rail direct injection with turbo charger 4 stroke; direct injection; Water cooled; Turbo charged; after cooler with after treatment system
    Aspiration
    Turbocharged Water cooled and Turbo charged
    Emission
    CEV Stage IV Stage 5
    Max Torque
    608 Nm @ 1500 rpm 550 Nm @ 1500 rpm
    Max Power
    140 HP (104.4 kW) @ 2200 rpm 130 HP (97 kW) @ 2200 rpm
    Piston Displacement
    4.458 L 4.8 L
    No Of Cylinders
    4 Cylinders 4 Cylinders
    Battery
    NA 2 x 12V / 110Ah
    Alternator
    NA 28V /100A

    Power Train

    L&T 9020 SX JCB 433-5
    Transmission
    Powershift Transmission Fully Automatic Powershift Transmission
    Drive Type
    4-wheel drive (4WD) 4-wheel drive (4WD)
    Torque Converter
    Avtec TT270 Single-stage; single-phase; heavy-duty torque converter

    Brakes

    L&T 9020 SX JCB 433-5
    Service
    4 Wheel oil immersed wet multi disc brake fitted at planetary hub. Hydraulic wet disc service brake; spring-applied transmission-mounted parking brake.
    Parking
    Internal expanding shoe type fitted on transmission at output to front axle. Spring-applied; hydraulically released (SAHR) disc brake

    Steering System

    L&T 9020 SX JCB 433-5
    Type
    Articulated Type - Full-Hydraulic Power Steering Hydrostatic Power Steering with a Priority Valve
    Steering-Angle
    ±40° ±40°

    Speed

    L&T 9020 SX JCB 433-5
    Max. Forward Speed
    29 km/h 31 km/h
    Max. Reverse Speed
    14.6 km/h 21 km/h

    Axles And Final Drive

    L&T 9020 SX JCB 433-5
    Front Axle
    Fixed type with a 45% limited slip differential Heavy-duty planetary with LSD.
    Rear Axle
    Standard differential Oscillating planetary - LSD optional.
    Oscillating Angle
    ±12° ±12°

    Hydraulics System

    L&T 9020 SX JCB 433-5
    System Type
    Open-Center Load-Sensing - Closed Center System
    Pump Type
    Tandem Gear Pump Variable Displacement Axial Piston Pump
    Maximum Pump Flow
    NA 164 L/min @ 2200 rpm
    System Pressure
    245 bar 250 bar

    Tyres

    L&T 9020 SX JCB 433-5
    Size
    Not Available Not Available

    Special Refill Cpacities

    L&T 9020 SX JCB 433-5
    Fuel Tank
    198 L 210 L
    Hydraulic System
    110 L 115 L
    Engine Oil
    17 L 14 L
    Cooling System
    25 L 24 L
    Rear Axle Oil
    28 L 18 L
    Front Axle Oil
    28 L 18 L
    Hydraulic Tank
    90 L NA
    Transmission Oil
    38 L 21 L
    Def Tank
    24 L 23.1 L

    Dimensions

    L&T 9020 SX JCB 433-5
    Overall Length With Bucket
    7480 mm 7450 mm
    Wheel Base
    2800 mm 3000 mm
    Height Over Cab
    3276 mm 3270 mm
    Height Over Exhaust
    2910 mm 2810 mm
    Min Grond Clearance
    410 mm 398 mm
    Width Over Tyres
    2325 mm 2230 mm
    Wheel Tread
    1920 mm 2230 mm
    Tyre Size
    14.00x25-L3-20PR 14 x 25(20PR) E3/L3 (BKT/CEAT)

    Performance

    L&T 9020 SX JCB 433-5
    Bucket Capacity
    1.5 - 3.5 m³ 1.5 m³
    Bucket Width
    2700 mm 2350 mm
    Payload
    3500 kg 3396 kg
    Tipping Load Straight
    NA 7687 kg
    Tipping Load Full Turn
    NA 6791 kg
    Max. Breakout Force
    113.5 kN 116 kN
    Operating Weight
    11400 kg 10835 kg
    Max Dump Angle
    50° 43.3°
    Bucket Roll Back Angle Full Height
    55° 52.3°
    Bucket Roll Back At Carry
    53° 42.3°
    Bucket Roll Back At Ground Level
    47° 38.3°
    Dumping Height, Fully Raised
    2715 mm 2850 mm
    Dumping Reach, Fully Raised
    1248 mm 1140 mm
    Max. Hinge Pin Height
    3810 mm 3850 mm
    Max. Digging Depth
    100 mm 48 mm
    Turning Radius Over Tyres
    NA 5230 mm
    Turning Radius Over Bucket
    5829 mm 5790 mm

    Popular Comparisons with L&T 9020 SX

    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Hyundai 630 Wheel Loader Price in India
    Hyundai Hyundai HL630I-V
    4.5 rating
    ₹ 48-50 Lakhs
    10810 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    ACE 300 Wheel Loader Price in India
    ACE ACE ALN 300
    4.5 rating
    Price Available Soon
    9970 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Hindustan Loader 2021E Price
    Caterpillar Hindustan 2021E
    4.5 rating
    ₹ 51-53 Lakhs
    11637 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    L&T 9020 Wheel Loader
    L&T Komatsu L&T 9020
    4.5 rating
    ₹ 53-55 Lakhs
    11500 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Hyundai 930 Loader
    Hyundai Hyundai HL930I
    4.5 rating
    ₹ 48-50 Lakhs
    10600 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    XCMG 33 Loader Price
    XCMG XCMG ZL33FV
    4.5 rating
    ₹ 53-55 Lakhs
    10600 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Liugong Loader 838 Price in India
    LiuGong Liugong 838H MAX
    4.5 rating
    ₹ 53-55 Lakhs
    12210 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Liugong Loader 836 Price in India
    LiuGong Liugong 836N
    4.5 rating
    ₹ 54-56 Lakhs
    11660 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Tata Hitachi 340 Loader Price
    Tata Hitachi Tata Hitachi TL340H Prime
    4.5 rating
    ₹ 47-49 Lakhs
    10980 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    JCB 440 Loader Price
    JCB JCB 440-5
    4.5 rating
    Price Available Soon
    12480 kg
    Compare
    VS
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Compare

    Popular Comparisons with JCB 433-5

    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Hyundai 630 Wheel Loader Price in India
    Hyundai Hyundai HL630I-V
    4.5 rating
    ₹ 48-50 Lakhs
    10810 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    ACE 300 Wheel Loader Price in India
    ACE ACE ALN 300
    4.5 rating
    Price Available Soon
    9970 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Hindustan Loader 2021E Price
    Caterpillar Hindustan 2021E
    4.5 rating
    ₹ 51-53 Lakhs
    11637 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    L&T Loader 9020 Price
    L&T Komatsu L&T 9020 SX
    4.5 rating
    ₹ 54-56 Lakhs
    11400 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    L&T 9020 Wheel Loader
    L&T Komatsu L&T 9020
    4.5 rating
    ₹ 53-55 Lakhs
    11500 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Hyundai 930 Loader
    Hyundai Hyundai HL930I
    4.5 rating
    ₹ 48-50 Lakhs
    10600 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    XCMG 33 Loader Price
    XCMG XCMG ZL33FV
    4.5 rating
    ₹ 53-55 Lakhs
    10600 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Liugong Loader 838 Price in India
    LiuGong Liugong 838H MAX
    4.5 rating
    ₹ 53-55 Lakhs
    12210 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Liugong Loader 836 Price in India
    LiuGong Liugong 836N
    4.5 rating
    ₹ 54-56 Lakhs
    11660 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    Tata Hitachi 340 Loader Price
    Tata Hitachi Tata Hitachi TL340H Prime
    4.5 rating
    ₹ 47-49 Lakhs
    10980 kg
    Compare
    VS
    JCB 433 Loader Price
    JCB JCB 433-5
    4.5 rating
    Price Available Soon
    10835 kg
    JCB 440 Loader Price
    JCB JCB 440-5
    4.5 rating
    Price Available Soon
    12480 kg
    Compare

    Frequently Asked Question

    Ans.

    The JCB 433-5 is built for lower fuel use. Its load-sensing hydraulic system sends oil only when the lever is used, so the engine does not waste power in between. The L&T 9020 SX has an open-centre system, which is simple and strong but keeps oil flowing all the time. Over a year, the difference shows in the diesel bill.

    Ans.

    The L&T 9020 SX pulls harder. It has a bigger engine and more torque, and it weighs more, so the bucket stays in the material instead of riding up. The JCB 433-5 is still strong, but the L&T has the edge on packed stone and hard-crusted heaps.

    Ans.

    The L&T 9020 SX comes with more covered hours than the JCB 433-5. If you run two shifts, those extra hours can cover a full extra year of work. Read what is covered, not just the number, and ask the dealer about labour charges and travel during the warranty period.

    Ans.

    Yes, both come with GPS as standard. You can see where the machine is and how many hours it worked, which helps if you rent it out or run more than one machine. Ask the dealer to show you the tracking app and to confirm how long the data service is free.

    Ans.

    JCB has one of the widest service networks in India, so parts and mechanics usually reach faster in small towns. L&T is strong on large contracts and in industrial areas. Drivers know both machines well. Before you buy, ask two owners near you how many days a common spare part takes to arrive.

    L&T 9020 SX Vs JCB 433-5 - Compare Price & Availability Across 600+ Locations in India

    Compare L&T 9020 SX Vs JCB 433-5 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare