Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    SANY SY580C-10HD VS Tata Hitachi ZAXIS 650H Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights SANY SY580C-10HDTata Hitachi ZAXIS 650H
    SANY SY580C-10HD VS Tata Hitachi ZAXIS 650H Excavator
    SANY SY580C-10HD Excavator
    SANY SY580C-10HD

    ₹1.50 - 1.70 crore

    Tata Hitachi ZAXIS 650H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi ZAXIS 650H

    Price Available Soon

    Particulars SANY SY580C-10HD Tata Hitachi ZAXIS 650H

    Sany SY580C-10HD vs Tata Hitachi ZAXIS 650H: Which One to Buy?

    Both are large excavators built for mining and heavy earthmoving, and both include an AC cabin and GPS, so the real decision for a fleet or EPC buyer sits outside the spec sheet. The Sany SY580C-10HD has more engine power and a bigger bucket range, letting it move more material per cycle on large-volume jobs. The Tata Hitachi ZAXIS 650H gives a stated fuel figure and higher digging force, which helps a buyer plan running cost and suits ground that needs stronger digging rather than sheer volume.

    For an EPC company running many machines across sites, Tata Hitachi's long-standing India service network and wide dealer spread often matter as much as raw output, since uptime depends on fast parts and service. Sany has grown its India presence quickly and its stronger power output suits high-volume mining fleets where moving more material per hour is the priority. Weigh your dig conditions and your service access together, not power numbers alone. See the full Sany excavator range, the Tata Hitachi excavator range, all excavators, or our excavator uses guide.

    Sany SY580C-10HD

    Pros:

    • Higher engine power with 403 HP providing robust performance
    • Bigger bucket capacity range of 2.5-3.5 m³ allowing for larger loads
    • Longer undercarriage length of 5440 mm which may provide better stability
    • Slightly faster travel speed at high gear with 5.4 Km/h
    • Features both an AC Cabin and GPS as standard for improved comfort and navigation

    Cons:

    • Less fuel-efficient as specific mileage is not mentioned
    • Lesser operating weight could imply lighter duties compared to its counterpart
    • Absence of track guard which could leave tracks more exposed to debris

    Tata Hitachi ZAXIS 650H

    Pros:

    • Includes specific mileage for better fuel management (40 L/hour)
    • Higher bucket digging force of 308 kN which implies stronger digging capacity
    • Greater operating weight at 58340 Kg indicating robust build and possibly more stability
    • Larger fuel tank of 740 L for extended operation on a single refill
    • Higher arm digging force at 258 kN for heavy-duty tasks

    Cons:

    • Slightly lower engine power rated at 395 HP which could affect performance
    • Smaller bucket capacity of 3.3 - 3.8 m³ when compared to the Sany model
    • Travel speed is marginally lower in both low and high gears
    • Has one less top roller which could affect track longevity and maintenance

    Pros:

    Cons:

    Closing Recommendation

    Both machines are built for large-scale mining and earthmoving, so choose based on your ground conditions and your fleet's running cost needs. Pick the Sany SY580C-10HD when you need more engine power and a bigger bucket to move high volumes of material fast. Pick the Tata Hitachi ZAXIS 650H when you want stronger digging force for tougher ground and a clear fuel figure to plan your running cost. So match the machine to your work: Sany SY580C-10HD for high-volume material moving, Tata Hitachi ZAXIS 650H for tough ground and predictable fuel planning.

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H Excavator Price, Technical Specifications & Features

    Brand SANY Excavator Tata Hitachi Excavator
    Type Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Operating Cost ₹1.50 - 1.70 crore Price Available Soon
    Price ₹1.50 - 1.70 crore Price Available Soon
    Weight 52000 Kg 58340 Kg
    Bucket 2.5-3.5 m³ 3.3 - 3.8 m³
    Max Digging Depth 7096 mm 7080 mm
    Engine Isuzu 403 HP Isuzu 395 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 7000 mm 6600 mm
    Quick Overview:

    The SANY SY580C-10HD Excavator is a heavy-duty 52-ton class mining excavator for large-scale earthmoving, quarry operations, and high-production infrastructure tasks where efficiency is critical. Powered by an Isuzu engine delivering around 403 HP, it supports continuous heavy-load operations with stable fuel performance during long cycles. With an operating weight of approximately 52,000 kg, this SANY excavator offers a strong base in demanding excavation environments. It achieves a digging depth of about 7,096 mm, allowing efficient work in deep mining and bulk excavation. A 3.5 m³ bucket increases material movement per cycle, enhancing output in high-volume settings. Hydraulic performance remains steady during multi-function operations, reducing delays. Reinforced parts enhance durability in tough conditions. Higher productivity per shift lowers costs per tonne and boosts project efficiency. The price for the SANY SY580C-10HD excavator in India is between Rs. 1.5 and Rs. 1.7 crore. This excavator from SANY Construction Equipment is best for mining contractors and infrastructure companies focusing on high-volume excavation projects.

    The Tata Hitachi ZAXIS 650H is a 58-ton heavy-duty mining excavator for deep pit excavation, high-volume bulk loading, and overburden stripping at major mining sites in India. It runs on a turbocharged 6-cylinder direct-injection diesel engine producing about 295 kW, providing the torque necessary for continuous mining operations around the clock. With a working weight of around 58,340 kg, this Tata Hitachi excavator offers the mass and stability needed for large bucket loading cycles on deep mining benches. Its maximum digging depth of about 15. 2 m makes it one of the deepest machines in Tata Hitachi’s Indian excavator range. The bucket capacity of 3. 3 to 3. 8 m³ fills efficiently and discharges quickly, allowing higher material throughput than 40-ton class machines. The pressurized operator cabin protects against dust and vibration in challenging mining environments during long shifts. Reinforced structural components and a heavy-duty undercarriage from Tata Hitachi Construction Equipment ensure consistent performance during high-impact mining operations. A larger bucket combined with deep reach means fewer repositioning cycles per shift, directly boosting daily output. Built for serious mining operators and bulk earthmoving contractors needing deep reach and high bucket capacity on continuous production schedules.

    Agency review

    Planning to buy the SANY SY580C-10HD Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Tata Hitachi ZAXIS 650H Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Sany SY580C-10HD vs Tata Hitachi ZAXIS 650H: Which One to Buy?

    Both are large excavators built for mining and heavy earthmoving, and both include an AC cabin and GPS, so the real decision for a fleet or EPC buyer sits outside the spec sheet. The Sany SY580C-10HD has more engine power and a bigger bucket range, letting it move more material per cycle on large-volume jobs. The Tata Hitachi ZAXIS 650H gives a stated fuel figure and higher digging force, which helps a buyer plan running cost and suits ground that needs stronger digging rather than sheer volume.

    For an EPC company running many machines across sites, Tata Hitachi's long-standing India service network and wide dealer spread often matter as much as raw output, since uptime depends on fast parts and service. Sany has grown its India presence quickly and its stronger power output suits high-volume mining fleets where moving more material per hour is the priority. Weigh your dig conditions and your service access together, not power numbers alone. See the full Sany excavator range, the Tata Hitachi excavator range, all excavators, or our excavator uses guide.

    Sany SY580C-10HD

    Pros:

    • Higher engine power with 403 HP providing robust performance
    • Bigger bucket capacity range of 2.5-3.5 m³ allowing for larger loads
    • Longer undercarriage length of 5440 mm which may provide better stability
    • Slightly faster travel speed at high gear with 5.4 Km/h
    • Features both an AC Cabin and GPS as standard for improved comfort and navigation

    Cons:

    • Less fuel-efficient as specific mileage is not mentioned
    • Lesser operating weight could imply lighter duties compared to its counterpart
    • Absence of track guard which could leave tracks more exposed to debris

    Tata Hitachi ZAXIS 650H

    Pros:

    • Includes specific mileage for better fuel management (40 L/hour)
    • Higher bucket digging force of 308 kN which implies stronger digging capacity
    • Greater operating weight at 58340 Kg indicating robust build and possibly more stability
    • Larger fuel tank of 740 L for extended operation on a single refill
    • Higher arm digging force at 258 kN for heavy-duty tasks

    Cons:

    • Slightly lower engine power rated at 395 HP which could affect performance
    • Smaller bucket capacity of 3.3 - 3.8 m³ when compared to the Sany model
    • Travel speed is marginally lower in both low and high gears
    • Has one less top roller which could affect track longevity and maintenance

    Pros:

    Cons:

    Closing Recommendation

    Both machines are built for large-scale mining and earthmoving, so choose based on your ground conditions and your fleet's running cost needs. Pick the Sany SY580C-10HD when you need more engine power and a bigger bucket to move high volumes of material fast. Pick the Tata Hitachi ZAXIS 650H when you want stronger digging force for tougher ground and a clear fuel figure to plan your running cost. So match the machine to your work: Sany SY580C-10HD for high-volume material moving, Tata Hitachi ZAXIS 650H for tough ground and predictable fuel planning.

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H Excavator Price, Technical Specifications & Features

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Brand
    SANY Excavator Tata Hitachi Excavator
    Type
    Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Price
    ₹1.50 - 1.70 crore Price Available Soon
    Weight
    52000 Kg 58340 Kg
    Bucket
    2.5-3.5 m³ 3.3 - 3.8 m³
    Max Digging Depth
    7096 mm 7080 mm
    Engine
    Isuzu 403 HP Isuzu 395 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    7000 mm 6600 mm
    Quick Overview:

    The SANY SY580C-10HD Excavator is a heavy-duty 52-ton class mining excavator for large-scale earthmoving, quarry operations, and high-production infrastructure tasks where efficiency is critical. Powered by an Isuzu engine delivering around 403 HP, it supports continuous heavy-load operations with stable fuel performance during long cycles. With an operating weight of approximately 52,000 kg, this SANY excavator offers a strong base in demanding excavation environments. It achieves a digging depth of about 7,096 mm, allowing efficient work in deep mining and bulk excavation. A 3.5 m³ bucket increases material movement per cycle, enhancing output in high-volume settings. Hydraulic performance remains steady during multi-function operations, reducing delays. Reinforced parts enhance durability in tough conditions. Higher productivity per shift lowers costs per tonne and boosts project efficiency. The price for the SANY SY580C-10HD excavator in India is between Rs. 1.5 and Rs. 1.7 crore. This excavator from SANY Construction Equipment is best for mining contractors and infrastructure companies focusing on high-volume excavation projects.

    The Tata Hitachi ZAXIS 650H is a 58-ton heavy-duty mining excavator for deep pit excavation, high-volume bulk loading, and overburden stripping at major mining sites in India. It runs on a turbocharged 6-cylinder direct-injection diesel engine producing about 295 kW, providing the torque necessary for continuous mining operations around the clock. With a working weight of around 58,340 kg, this Tata Hitachi excavator offers the mass and stability needed for large bucket loading cycles on deep mining benches. Its maximum digging depth of about 15. 2 m makes it one of the deepest machines in Tata Hitachi’s Indian excavator range. The bucket capacity of 3. 3 to 3. 8 m³ fills efficiently and discharges quickly, allowing higher material throughput than 40-ton class machines. The pressurized operator cabin protects against dust and vibration in challenging mining environments during long shifts. Reinforced structural components and a heavy-duty undercarriage from Tata Hitachi Construction Equipment ensure consistent performance during high-impact mining operations. A larger bucket combined with deep reach means fewer repositioning cycles per shift, directly boosting daily output. Built for serious mining operators and bulk earthmoving contractors needing deep reach and high bucket capacity on continuous production schedules.

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H Excavator Key Highlights

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Engine Make Isuzu 6WG1X ISUZU BB-6WG1X
    Fuel Tank 680 L 740 L
    Engine Displacment 15.68 L 15.68 L
    Under Carriage 5440 mm 5330 mm
    Hydraulic System NA 618 L
    Arm 2800 mm 2900 mm
    Max Digging Reach 11489 mm 11540 mm
    Fuel Consumption NA 40 L/hour
    Overall Width 3360 mm 3990 mm
    Overall Length 12076 mm 13030 mm
    Bucket Digging Force 270 kN 308 kN
    Tailswing Radius 3765 mm 3800 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H Excavator Key Highlights

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Engine Make
    Isuzu 6WG1X ISUZU BB-6WG1X
    Fuel Tank
    680 L 740 L
    Engine Displacment
    15.68 L 15.68 L
    Under Carriage
    5440 mm 5330 mm
    Hydraulic System
    NA 618 L
    Arm
    2800 mm 2900 mm
    Max Digging Reach
    11489 mm 11540 mm
    Fuel Consumption
    NA 40 L/hour
    Overall Width
    3360 mm 3990 mm
    Overall Length
    12076 mm 13030 mm
    Bucket Digging Force
    270 kN 308 kN
    Tailswing Radius
    3765 mm 3800 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H Excavator Specifications

    Engine

    3683 3640
    Model Isuzu 403 HP Isuzu 395 HP
    Fuel Diesel Diesel
    Type 6 Cylinder , inline , Water Cooled 4 Cycle water cooled , 6 Cylinders , direct injection , turbocharged
    Rated Engine Power 403 HP (300 kW) @ 1800 rpm 395 HP (295 kW) @ 1800 rpm
    Maximum Torque 1950 Nm @ 1400 rpm 1540 Nm @ 1500 rpm
    Piston Displacement 15.68 L 15.68 L
    Alternator 50A 50A
    Battery 2 x 12 V 170 Ah , 2 x 12 V
    Starting Motor 24 V - 5.5 kW NA

    Undercarriage

    NA NA
    No of Top rollers 2 3
    No of bottom rollers 9 8
    Track Shoes (Each Side) 50 48
    Track Guard NA 2
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure 87.1 kPa 102 kPa
    Track Tensioning Grease Grease
    Gradeability 70 % (35°) 70% (35 °) Continuous
    Travel Speed-Low 3.1 Km/h 3.5 Km/h
    Travel Speed-High 5.4 Km/h 5.0 Km/h
    Max Tracking Force 339 kN 415 kN

    Hydraulic System

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Hydraulic pump 2 Variable Displacement Axial Piston Pumps 2 Variable Displacement Axial Piston Pumps
    Maximum Flow 2 x 366 L/min 2 x 434 L/min
    Pilot Pump Gear Pump 1 Gear Pump
    Implement Circuit 34.3 MPa 30.9 MPa
    Swing Circuit 26.9 MPa 29.4 MPa
    Travel circuit 31.4 MPa 34.3 MPa
    Pilot circuit 3.9 MPa 3.9 MPa

    Hydraulic Motors

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Travel 2 Axial Piston Motor With Parking Brake 2 Axial Piston Motors with Parking Brake
    Swing Axial Piston Motor with Swing Holding Brake 2 Axial Piston Motors

    Service Capacities

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Fuel tank 680 L 740 L
    Engine Coolant 24 L 98 L
    Engine oil 50 L 55 L
    Hydraulic system NA 618 L
    Hydraulic tank 480 L 310 L

    Machine Weight

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Operating Weight 52000 Kg 58340 Kg

    Working Range

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Boom length 7000 mm 6600 mm
    Arm length 2800 mm 2900 mm
    Max Digging Reach 11489 mm 11540 mm
    Max Digging Reach on ground NA 11350 mm
    Max digging depth 7096 mm 7080 mm
    Max digging height 10936 mm 10770 mm
    Max Dump Height 7255 mm 6980 mm
    Max vertical wallcut depth NA 5140 mm
    Min swing radius 5251 mm 4930 mm
    Max Height at Min Swing radius 5251 mm NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 270 kN 308 kN
    Arm Digging Force 244 kN 258 kN
    Swing Speed 8.0 rpm 7.0 rpm

    Dozer Blade

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Bucket Capacity 2.5-3.5 m³ 3.3 - 3.8 m³

    Static Dimensions

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Overall Length 12076 mm 13030 mm
    Overall width 3360 mm 3990 mm
    Overall Height 3700 mm 4270 mm
    Overall Height of Cab 3470 mm 3500 mm
    Upper Width 3290 mm 3310 mm
    Track Lengh on Ground 4415 mm 4250 mm
    Undercarriage overall length 5440 mm 5330 mm
    Tailswing radius 3765 mm 3800 mm
    Min Ground clearance 560 mm 810 mm
    Track gauge 2740 mm 3200 mm
    Width over tracks 3360 mm NA
    Track Height NA NA
    Counterweight Clearance NA 1450 mm
    Track Shoe Width 600 mm 600 mm

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H Excavator Specifications

    Engine

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Model
    Isuzu 403 HP Isuzu 395 HP
    Fuel
    Diesel Diesel
    Type
    6 Cylinder , inline , Water Cooled 4 Cycle water cooled , 6 Cylinders , direct injection , turbocharged
    Rated Engine Power
    403 HP (300 kW) @ 1800 rpm 395 HP (295 kW) @ 1800 rpm
    Maximum Torque
    1950 Nm @ 1400 rpm 1540 Nm @ 1500 rpm
    Piston Displacement
    15.68 L 15.68 L
    Alternator
    50A 50A
    Battery
    2 x 12 V 170 Ah , 2 x 12 V
    Starting Motor
    24 V - 5.5 kW NA

    Undercarriage

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    No of Top rollers
    2 3
    No of bottom rollers
    9 8
    Track Shoes (Each Side)
    50 48
    Track Guard
    NA 2
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    87.1 kPa 102 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    70 % (35°) 70% (35 °) Continuous
    Travel Speed-Low
    3.1 Km/h 3.5 Km/h
    Travel Speed-High
    5.4 Km/h 5.0 Km/h
    Max Tracking Force
    339 kN 415 kN

    Hydraulic Motors

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Hydraulic pump
    2 Variable Displacement Axial Piston Pumps 2 Variable Displacement Axial Piston Pumps
    Maximum Flow
    2 x 366 L/min 2 x 434 L/min
    Pilot Pump
    Gear Pump 1 Gear Pump
    Implement Circuit
    34.3 MPa 30.9 MPa
    Swing Circuit
    26.9 MPa 29.4 MPa
    Travel circuit
    31.4 MPa 34.3 MPa
    Pilot circuit
    3.9 MPa 3.9 MPa

    Service Capacities

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Fuel tank
    680 L 740 L
    Engine Coolant
    24 L 98 L
    Engine oil
    50 L 55 L
    Hydraulic system
    NA 618 L
    Hydraulic tank
    480 L 310 L

    Machine Weight

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Operating Weight
    52000 Kg 58340 Kg

    Working Range

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Boom length
    7000 mm 6600 mm
    Arm length
    2800 mm 2900 mm
    Max Digging Reach
    11489 mm 11540 mm
    Max Digging Reach on ground
    NA 11350 mm
    Max digging depth
    7096 mm 7080 mm
    Max digging height
    10936 mm 10770 mm
    Max Dump Height
    7255 mm 6980 mm
    Max vertical wallcut depth
    NA 5140 mm
    Min swing radius
    5251 mm 4930 mm
    Max Height at Min Swing radius
    5251 mm NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    270 kN 308 kN
    Arm Digging Force
    244 kN 258 kN
    Swing Speed
    8.0 rpm 7.0 rpm

    Dozer Blade

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Bucket Capacity
    2.5-3.5 m³ 3.3 - 3.8 m³

    Static Dimensions

    SANY SY580C-10HD Tata Hitachi ZAXIS 650H
    Overall Length
    12076 mm 13030 mm
    Overall width
    3360 mm 3990 mm
    Overall Height
    3700 mm 4270 mm
    Overall Height of Cab
    3470 mm 3500 mm
    Upper Width
    3290 mm 3310 mm
    Track Lengh on Ground
    4415 mm 4250 mm
    Undercarriage overall length
    5440 mm 5330 mm
    Tailswing radius
    3765 mm 3800 mm
    Min Ground clearance
    560 mm 810 mm
    Track gauge
    2740 mm 3200 mm
    Width over tracks
    3360 mm NA
    Track Height
    NA NA
    Counterweight Clearence
    NA 1450 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with SANY SY580C-10HD

    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    Liebherr Liebherr R 960 SME Litronic
    4.5 rating
    Price Available Soon
    60000 Kg
    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    Liebherr Liebherr R 956 Litronic
    4.5 rating
    Price Available Soon
    53100 Kg
    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    Volvo Volvo EC550E
    4.5 rating
    ₹2.30- 2.80 crore
    54500 Kg
    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    L&T Komatsu L&T LT-300
    4.5 rating
    Price Available Soon
    61450 Kg
    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    VS
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg

    Popular Comparisons with Tata Hitachi ZAXIS 650H

    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    SANY SY680C-10HD Excavator
    SANY SANY SY680C-10HD
    4.5 rating
    Price Available Soon
    63620 kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    LiuGong Liugong 965E HD
    4.5 rating
    ₹1.25- 1.35 crore
    62600 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    BEML BEML BE700
    4.5 rating
    Price Available Soon
    69500 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Liebherr Liebherr R 972 Litronic
    4.5 rating
    Price Available Soon
    68450 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Liebherr Liebherr R 960 SME Litronic
    4.5 rating
    Price Available Soon
    60000 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Liebherr Liebherr R 956 Litronic
    4.5 rating
    Price Available Soon
    53100 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Volvo Volvo EC550E
    4.5 rating
    ₹2.30- 2.80 crore
    54500 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Tata Hitachi Tata Hitachi ZAXIS 670H
    4.5 rating
    Price Available Soon
    63500 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    L&T Komatsu L&T LT-300
    4.5 rating
    Price Available Soon
    61450 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    VS
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg

    Frequently Asked Question

    Ans.

    The Sany SY580C-10HD moves more material per cycle. It has a bigger bucket capacity range and more engine power, so it suits high-volume mining or bulk earthmoving jobs. The Tata Hitachi ZAXIS 650H has a smaller bucket range but makes up for it with stronger digging force in hard ground.

    Ans.

    The Tata Hitachi ZAXIS 650H is easier for planning fuel cost, since its fuel use per hour is stated clearly. The Sany SY580C-10HD does not list a specific fuel figure, so buyers should ask the dealer directly before budgeting a large mining fleet.

    Ans.

    Tata Hitachi has wider, older service support across India, built over many years of working with local contractors and EPC firms. Sany's India network is newer but growing fast in mining regions. For a large fleet, check dealer distance and parts stock near each of your sites before deciding.

    Ans.

    Yes, it has higher bucket and arm digging force than the Sany SY580C-10HD, so it cuts into hard or compacted ground with less strain. If your site has rocky or dense soil, this extra digging force matters more than raw bucket size.

    Ans.

    Both suit large mining fleets, but for different reasons. The Sany SY580C-10HD suits fleets that need to shift high volumes of loose material fast. The Tata Hitachi ZAXIS 650H suits fleets working tougher ground where digging force and known fuel cost matter more than raw output.

    SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H - Compare Price & Availability Across 600+ Locations in India

    Compare SANY SY580C-10HD Vs Tata Hitachi ZAXIS 650H price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare