Contact Us



    Your Captcha*

    captcha

    Chat with us

    Bull HD100 4WD VS JCB 2DX Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Bull HD100 4WDJCB 2DX
    Bull HD100 4WD VS JCB 2DX Backhoe Loader
    Bull HD 100 Price
    Bull HD100 4WD

    ₹ 34-38 Lakhs

    JCB 2DX On Road Price
    JCB 2DX

    ₹ 18-20 Lakhs

    Particulars Bull HD100 4WD JCB 2DX

    Bull HD 100 4WD vs JCB 2DX: Which One Should You Buy?

    These two machines are not the same size. So do not just look at the numbers. Look at the work you will do. The Bull HD 100 4WD is a big and strong machine with four-wheel drive. It has a large engine. It digs deep and lifts heavy loads. It is made for hard jobs, wet ground, and big sites. The JCB 2DX is a small and light machine. It uses less fuel. It moves easily in small streets and tight spaces. It is made for small jobs and light digging near towns and homes.

    Before you buy, think about a few simple things. What kind of work do you do most days? Is a service centre near you? Can you pay the loan every month without trouble? Big machines cost more to run. Small machines finish less work in a day. Pick the one that matches your work, not the one with the bigger numbers. You can also see the full JCB backhoe range and the Bull backhoe range, or read our backhoe loader buying guide.

    Bull HD100 4WD Backhoe Loader

    Pros:

    • Higher engine power of 100 HP allows for robust performance.
    • 4-wheel drive improves stability and control on difficult terrains.
    • Higher digging and lifting capabilities with excavator max lift capacity of 1400 kg and bucket digging force of 6072 kgf.
    • Comes with a GPS as a standard feature for better navigation and fleet management.

    Cons:

    • Larger overall dimensions may not be suitable for confined spaces.
    • Higher machine weight of 8200 kg could affect transportation costs.

    JCB 2DX Backhoe Loader

    Pros:

    • Compact size and maneuverability suitable for urban construction and confined spaces.
    • Lower machine weight of 5220 kg easier for transport and less ground pressure.
    • Higher maximum lift capacity of the excavator at 1490 kg.

    Cons:

    • Lower engine power of 49 HP may limit heavy-duty performance.
    • 2-wheel drive might not perform as well on rough terrain compared to 4WD.

    Pros:

    Cons:

    Closing Recommendation

    In the end, let the work decide, not the size of the machine. Pick the Bull HD 100 4WD for hard, heavy jobs, deep digging, and wet or rough ground where you need a big and strong four-wheel-drive machine. Pick the JCB 2DX for light digging and small jobs where you must move through narrow streets and tight spaces near homes and towns. Also make sure a service centre, spare parts, and a trained driver are easy to find near you, since that keeps the machine working and helps at resale time. So match the machine to your work: Bull HD 100 4WD for heavy work on big or tough sites, JCB 2DX for light work in tight places.

    Bull HD100 4WD Vs JCB 2DX Backhoe Loader Price, Technical Specifications & Features

    Brand Bull Backhoe Loader JCB Backhoe Loader
    Type 4WD 2WD
    Price ₹ 34-38 Lakhs ₹ 18-20 Lakhs
    Engine Perkins 100 HP KOEL 49 HP
    Bucket 0.27 m³ 0.18 m³
    Shovel 1.1 m³ 0.60 m³
    Max Digging Depth 4600 mm 3020 mm
    Max Dump Height 2960 mm 2300 mm
    Weight 8200 Kg 5220 Kg
    Quick Overview:

    The HD 100 Backhoe Loader from BULL is a high-performance machine built for maximum productivity. It has a 100 HP (74.9 kW) Perkins engine paired with a ZF transmission for better driveline efficiency. With available 4WD, 230 bar hydraulics, and 145 LPM pump flow, it provides excellent digging force, quicker cycle times, and high operational efficiency. Its heavy build, 8200 kg operating weight, and 40 km/h travel speed make it suitable for large construction projects and continuous operations. The model includes a 90° foundation bucket, high breakout force, premium cabin, and a low-cost maintenance design. The BULL HD 100 backhoe loader price in India usually falls between ₹34–38 lakh, targeting contractors who need power, reliability, and long-term return on investment.

    Designed for small construction sites and utility work, the 2DX Backhoe Loader from JCB delivers practical performance for trenching, road repair, and light excavation across India. It runs on a 49 HP class diesel engine that balances fuel efficiency with consistent hydraulic output. With an operating weight of around 4970 kg, the machine remains stable while working in compact areas. A digging depth of approximately 3.02 metres and a 0.6 m³ bucket support efficient material handling. The JCB 2DX backhoe loader price in India ranges between ₹18–20 lakhs. A suitable choice for small contractors focused on affordability and ease of operation.

    Bull HD 100 4WD vs JCB 2DX: Which One Should You Buy?

    These two machines are not the same size. So do not just look at the numbers. Look at the work you will do. The Bull HD 100 4WD is a big and strong machine with four-wheel drive. It has a large engine. It digs deep and lifts heavy loads. It is made for hard jobs, wet ground, and big sites. The JCB 2DX is a small and light machine. It uses less fuel. It moves easily in small streets and tight spaces. It is made for small jobs and light digging near towns and homes.

    Before you buy, think about a few simple things. What kind of work do you do most days? Is a service centre near you? Can you pay the loan every month without trouble? Big machines cost more to run. Small machines finish less work in a day. Pick the one that matches your work, not the one with the bigger numbers. You can also see the full JCB backhoe range and the Bull backhoe range, or read our backhoe loader buying guide.

    Bull HD100 4WD Backhoe Loader

    Pros:

    • Higher engine power of 100 HP allows for robust performance.
    • 4-wheel drive improves stability and control on difficult terrains.
    • Higher digging and lifting capabilities with excavator max lift capacity of 1400 kg and bucket digging force of 6072 kgf.
    • Comes with a GPS as a standard feature for better navigation and fleet management.

    Cons:

    • Larger overall dimensions may not be suitable for confined spaces.
    • Higher machine weight of 8200 kg could affect transportation costs.

    JCB 2DX Backhoe Loader

    Pros:

    • Compact size and maneuverability suitable for urban construction and confined spaces.
    • Lower machine weight of 5220 kg easier for transport and less ground pressure.
    • Higher maximum lift capacity of the excavator at 1490 kg.

    Cons:

    • Lower engine power of 49 HP may limit heavy-duty performance.
    • 2-wheel drive might not perform as well on rough terrain compared to 4WD.

    Pros:

    Cons:

    Closing Recommendation

    In the end, let the work decide, not the size of the machine. Pick the Bull HD 100 4WD for hard, heavy jobs, deep digging, and wet or rough ground where you need a big and strong four-wheel-drive machine. Pick the JCB 2DX for light digging and small jobs where you must move through narrow streets and tight spaces near homes and towns. Also make sure a service centre, spare parts, and a trained driver are easy to find near you, since that keeps the machine working and helps at resale time. So match the machine to your work: Bull HD 100 4WD for heavy work on big or tough sites, JCB 2DX for light work in tight places.

    Bull HD100 4WD Vs JCB 2DX Backhoe Loader Price, Technical Specifications & Features

    Bull HD100 4WD JCB 2DX
    Brand
    Bull Backhoe Loader JCB Backhoe Loader
    Type
    4WD 2WD
    Price
    ₹ 34-38 Lakhs ₹ 18-20 Lakhs
    Engine
    Perkins 100 HP KOEL 49 HP
    Bucket
    0.27 m³ 0.18 m³
    Shovel
    1.1 m³ 0.60 m³
    Max Digging Depth
    4600 mm 3020 mm
    Max Dump Height
    2960 mm 2300 mm
    Weight
    8200 Kg 5220 Kg
    Quick Overview:

    The HD 100 Backhoe Loader from BULL is a high-performance machine built for maximum productivity. It has a 100 HP (74.9 kW) Perkins engine paired with a ZF transmission for better driveline efficiency. With available 4WD, 230 bar hydraulics, and 145 LPM pump flow, it provides excellent digging force, quicker cycle times, and high operational efficiency. Its heavy build, 8200 kg operating weight, and 40 km/h travel speed make it suitable for large construction projects and continuous operations. The model includes a 90° foundation bucket, high breakout force, premium cabin, and a low-cost maintenance design. The BULL HD 100 backhoe loader price in India usually falls between ₹34–38 lakh, targeting contractors who need power, reliability, and long-term return on investment.

    Designed for small construction sites and utility work, the 2DX Backhoe Loader from JCB delivers practical performance for trenching, road repair, and light excavation across India. It runs on a 49 HP class diesel engine that balances fuel efficiency with consistent hydraulic output. With an operating weight of around 4970 kg, the machine remains stable while working in compact areas. A digging depth of approximately 3.02 metres and a 0.6 m³ bucket support efficient material handling. The JCB 2DX backhoe loader price in India ranges between ₹18–20 lakhs. A suitable choice for small contractors focused on affordability and ease of operation.

    Bull HD100 4WD Vs JCB 2DX Backhoe Loader Key Highlights

    Bull HD100 4WD JCB 2DX
    Engine Make PERKINS 1104D-44TA KOEL 4R810-NA
    Fuel Tank 115 L 60 L
    Max Torque 410 Nm @ 1400 RPM 203 Nm @ 1400 RPM
    Max Speed 40 km/hr 28.8 km/hr
    Hydraulic System 120 L 60 L
    Max Working Height 5920 mm 3880 mm
    Excavator Max Lift Capacity 1400 kg 1490 kg
    Loader Load Over Height 4140 mm 2740 mm
    Overall Length 6040 mm 5500 mm
    Wheel Base 2220 mm 2080 mm
    Bucket Digging Force 6072 kgf 3120 kgf
    Shovel Breakout Force 8183 kgf 3370 kgf
    Warranty 1 Year 1 Yr. / 2000 hr.
    AC Cabin Optional Optional
    GPS Standard Standard

    Bull HD100 4WD Vs JCB 2DX Backhoe Loader Key Highlights

    Bull HD100 4WD JCB 2DX
    Engine Make
    PERKINS 1104D-44TA KOEL 4R810-NA
    Fuel Tank
    115 L 60 L
    Max Torque
    410 Nm @ 1400 RPM 203 Nm @ 1400 RPM
    Max Speed
    40 km/hr 28.8 km/hr
    Hydraulic System
    120 L 60 L
    Max Working Height
    5920 mm 3880 mm
    Excavator Max Lift Capacity
    1400 kg 1490 kg
    Loader Load Over Height
    4140 mm 2740 mm
    Overall Length
    6040 mm 5500 mm
    Wheel Base
    2220 mm 2080 mm
    Bucket Digging Force
    6072 kgf 3120 kgf
    Shovel Breakout Force
    8183 kgf 3370 kgf
    Warranty
    1 Year 1 Yr. / 2000 hr.
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    Bull HD100 4WD Vs JCB 2DX Backhoe Loader Specifications

    Engine

    Bull HD100 4WD JCB 2DX
    Model Perkins 100 HP KOEL 49 HP
    Type EU NRMM 97/68/EC EURO III 3A Diesel Engine; 4 Cylinders 4 Cylinder Water Cooled, BSIII Diesel Engine
    Gross Power 100 HP (74.5 kW) @ 2200 RPM 49 HP (36.4 kW)
    Max Torque 410 Nm @ 1400 RPM 203 Nm @ 1400 RPM
    Displacement NA 3.2 L
    Battery 12V / 180Ah 12V
    Alternator NA 100A

    Transmission

    Bull HD100 4WD JCB 2DX
    Type ZF Power Shift Transmission with integral torque convertor. JCB. SS 700 svncbroshuttle transmission

    Steering

    Bull HD100 4WD JCB 2DX
    Type Full power; front wheel hydraulic power steering with manual capability in the event of engine or hydraullic power failure. Full power; front wheel hydrostatic power steering with power track road and manual capability in the event of engine or hydraulic power failure.
    Working Pressure 240 bar 125 bar

    Steering Turning Circle

    Bull HD100 4WD JCB 2DX
    Inner Wheels Braked - Outside Loader Bucket 8800 mm 10300 mm
    Inner Wheels Braked - Outside Wheels 6300 mm 8300 mm
    Inner Wheels not Braked - Outside Loader Bucket 11600 mm 10900 mm
    Inner Wheels not Braked - Outside Wheels 8900 mm 8760 mm

    Brakes

    Bull HD100 4WD JCB 2DX
    Service Not Available Hydraulically actuated; dual line; self-adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; etc.
    Parking Hand operated; oil immersed multi disc on the rear axle. Hand operated disc brakes on rear axle input disc.

    Tyres

    Bull HD100 4WD JCB 2DX
    Front 12.5 / 80 x 18 -12 PR 7.5 x 16 - 16 PR (industrial tyre)
    Rear 16.9 x 28 -12 PR (STD INDUSTRIAL TYRE) 12 x 24 - 20 PR

    Speed

    Bull HD100 4WD JCB 2DX
    Forward- 1st gear NA 4.4 km/hr
    Reverse- 1st gear NA 4.4 km/hr
    Forward- 2nd gear NA 7.1 km/hr
    Reverse- 2nd gear NA 7.1 km/hr
    Forward- 3rd gear 40 km/hr 15.2 km/hr
    Reverse- 3rd gear 22 km/hr Not recommended
    Forward- 4th gear NA 28.8 km/hr
    Reverse- 4th gear NA Not recommended

    Hydraulics

    Bull HD100 4WD JCB 2DX
    Type Gear Pump Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow 145 L/min @ 2200 RPM 70.4 L/min @ 2200 RPM
    System Pressure 230 bar 180 bar

    Axles

    Bull HD100 4WD JCB 2DX
    Rear Axle Drive axle rigidly mounted; incorporates Max-trac torque proportioning differential; driven by short propshaft from gear box. Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle Front: Steer axle; centrally pivoted with oscillation angle ±16°. 2WD steer axle; centrally pivoted; with oscillation angle of 16°.

    Service Capacities

    Bull HD100 4WD JCB 2DX
    Fuel Tank 115 L 60 L
    Engine Coolant 17 L 13.5 L
    Engine Oil 10 L 8 L
    Hydraulic Tank 100 L NA
    Hydraulic System 120 L 60 L
    Transmission 19.5 L 16 L
    Rear Axle 17 L 10 L

    Excavator Performance

    Bull HD100 4WD JCB 2DX
    Maximum Digging Depth 4600 mm 3020 mm
    Reach-Ground Level to Rear Wheel Centre 6810 mm 5140 mm
    Reach-Ground Level to Slew Centre 5500 mm 3930 mm
    Reach at Full Height to Slew Centre 2850 mm 1810 mm
    Side Reach to Centre Line of Machine 6080 mm 4360 mm
    Maximum Working Height 5920 mm 3880 mm
    Maximum Load Over Height 4140 mm 2740 mm
    Bucket Rotation Angle 188° 182°
    Bucket Digging force 6072 kgf 3120 kgf
    Arm Digging force 3150 kgf 1750 kgf
    Maximum Lift Capacity 1400 kg 1490 kg
    Standard Bucket Capacity 0.27 m³ 0.18 cm³
    Standard Bucket Width NA NA

    Loader Performance

    Bull HD100 4WD JCB 2DX
    Dump Height 2960 mm 2300 mm
    Load Over Height 3390 mm 2830 mm
    Pin Height 3610 mm 3000 mm
    Pin Forward Reach 420 mm 370 mm
    Reach At Ground 1470 mm 1300 mm
    Maximum Reach at Full Height 1280 mm 1120 mm
    Max Reach Full Height Dumped 890 mm 790 mm
    Below Ground Level Dig Depth 100 mm 90 mm
    Rollback at Ground 49° 46°
    Dump Angle 45° 44°
    Shovel Breakout Force 8183 kgf 3370 kgf
    Loader Arm Breakout Force 5251 kgf 1834 kgf
    Maximum Payload 1800 kg 800 kg

    Overall Dimensions And Weight

    Bull HD100 4WD JCB 2DX
    Machine Weight 8200 kg 5220 kg
    Overall Length 6040 mm 5500 mm
    Wheelbase 2220 mm 2080 mm
    Slew Centre to Rear Axle Centre NA NA
    Minimum Ground Clearance 480 mm 330 mm
    Slew Ground Clearance 650 mm 484 mm
    Height of Cabin 3000 mm 2700 mm
    Overall Height 3710 mm 2650 mm
    Track Width-Rear 1700 mm 1420 mm
    Track Width-Front 1930 mm 1620 mm
    Width Over Bucket 2350 mm 1912 mm

    Bull HD100 4WD Vs JCB 2DX Backhoe Loader Specifications

    Engine

    Bull HD100 4WD JCB 2DX
    Model
    Perkins 100 HP KOEL 49 HP
    Type
    EU NRMM 97/68/EC EURO III 3A Diesel Engine; 4 Cylinders 4 Cylinder Water Cooled, BSIII Diesel Engine
    Gross Power
    100 HP (74.5 kW) @ 2200 RPM 49 HP (36.4 kW)
    Max Torque
    410 Nm @ 1400 RPM 203 Nm @ 1400 RPM
    Displacement
    NA 3.2 L
    Battery
    12V / 180Ah 12V
    Alternator
    NA 100A

    Transmission

    Bull HD100 4WD JCB 2DX
    Type
    ZF Power Shift Transmission with integral torque convertor. JCB. SS 700 svncbroshuttle transmission

    Steering

    Bull HD100 4WD JCB 2DX
    Type
    Full power; front wheel hydraulic power steering with manual capability in the event of engine or hydraullic power failure. Full power; front wheel hydrostatic power steering with power track road and manual capability in the event of engine or hydraulic power failure.
    Working Pressure
    240 bar 125 bar

    Steering Turning Circle

    Bull HD100 4WD JCB 2DX
    Inner Wheels Braked - Outside Loader Bucket
    8800 mm 10300 mm
    Inner Wheels Braked - Outside Wheels
    6300 mm 8300 mm
    Inner Wheels not Braked - Outside Loader Bucket
    11600 mm 10900 mm
    Inner Wheels not Braked - Outside Wheels
    8900 mm 8760 mm

    Brakes

    Bull HD100 4WD JCB 2DX
    Service
    Not Available Hydraulically actuated; dual line; self-adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; etc.
    Parking
    Hand operated; oil immersed multi disc on the rear axle. Hand operated disc brakes on rear axle input disc.

    Tyres

    Bull HD100 4WD JCB 2DX
    Front
    12.5 / 80 x 18 -12 PR 7.5 x 16 - 16 PR (industrial tyre)
    Rear
    16.9 x 28 -12 PR (STD INDUSTRIAL TYRE) 12 x 24 - 20 PR

    Speed

    Bull HD100 4WD JCB 2DX
    Forward- 1st gear
    NA 4.4 km/hr
    Reverse- 1st gear
    NA 4.4 km/hr
    Forward- 2nd gear
    NA 7.1 km/hr
    Reverse- 2nd gear
    NA 7.1 km/hr
    Forward- 3rd gear
    40 km/hr 15.2 km/hr
    Reverse- 3rd gear
    22 km/hr Not recommended
    Forward- 4th gear
    NA 28.8 km/hr
    Reverse- 4th gear
    NA Not recommended

    Hydraulics

    Bull HD100 4WD JCB 2DX
    Type
    Gear Pump Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow
    145 L/min @ 2200 RPM 70.4 L/min @ 2200 RPM
    System Pressure
    230 bar 180 bar

    Axles

    Bull HD100 4WD JCB 2DX
    Rear Axle
    Drive axle rigidly mounted; incorporates Max-trac torque proportioning differential; driven by short propshaft from gear box. Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle
    Front: Steer axle; centrally pivoted with oscillation angle ±16°. 2WD steer axle; centrally pivoted; with oscillation angle of 16°.

    Service Capacities

    Bull HD100 4WD JCB 2DX
    Fuel Tank
    115 L 60 L
    Engine Coolant
    17 L 13.5 L
    Engine Oil
    10 L 8 L
    Hydraulic Tank
    100 L NA
    Hydraulic System
    120 L 60 L
    Transmission
    19.5 L 16 L
    Rear Axle
    17 L 10 L

    Excavator Performance

    Bull HD100 4WD JCB 2DX
    Maximum Digging Depth
    4600 mm 3020 mm
    Reach-Ground Level to Rear Wheel Centre
    6810 mm 5140 mm
    Reach-Ground Level to Slew Centre
    5500 mm 3930 mm
    Reach at Full Height to Slew Centre
    2850 mm 1810 mm
    Side Reach to Centre Line of Machine
    6080 mm 4360 mm
    Maximum Working Height
    5920 mm 3880 mm
    Maximum Load Over Height
    4140 mm 2740 mm
    Bucket Rotation Angle
    188° 182°
    Bucket Digging force
    6072 kgf 3120 kgf
    Arm Digging force
    3150 kgf 1750 kgf
    Maximum Lift Capacity
    1400 kg 1490 kg
    Standard Bucket Capacity
    0.27 m³ 0.18 cm³
    Standard Bucket Width
    NA NA

    Loader Performance

    Bull HD100 4WD JCB 2DX
    Dump Height
    2960 mm 2300 mm
    Load Over Height
    3390 mm 2830 mm
    Pin Height
    3610 mm 3000 mm
    Pin Forward Reach
    420 mm 370 mm
    Reach At Ground
    1470 mm 1300 mm
    Maximum Reach at Full Height
    1280 mm 1120 mm
    Max Reach Full Height Dumped
    890 mm 790 mm
    Below Ground Level Dig Depth
    100 mm 90 mm
    Rollback at Ground
    49° 46°
    Dump Angle
    45° 44°
    Shovel Breakout Force
    8183 kgf 3370 kgf
    Loader Arm Breakout Force
    5251 kgf 1834 kgf
    Maximum Payload
    1800 kg 800 kg

    Overall Dimensions And Weight

    Bull HD100 4WD JCB 2DX
    Machine Weight
    8200 kg 5220 kg
    Overall Length
    6040 mm 5500 mm
    Wheelbase
    2220 mm 2080 mm
    Slew Centre to Rear Axle Centre
    NA NA
    Minimum Ground Clearance
    480 mm 330 mm
    Slew Ground Clearance
    650 mm 484 mm
    Height of Cabin
    3000 mm 2700 mm
    Overall Height
    3710 mm 2650 mm
    Track Width-Rear
    1700 mm 1420 mm
    Track Width-Front
    1930 mm 1620 mm
    Width Over Bucket
    2350 mm 1912 mm

    Popular Comparisons with Bull HD100 4WD

    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    Tata Hitachi Tata Hitachi Shinrai Power
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    BEML BEML BL9H 4×4
    4.5 rating
    ₹32 - 36 lakhs
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    Escorts Kubota Escorts Jungli HT
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    ACE ACE Phantom 4WD N
    4.5 rating
    Price Available Soon
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    ACE ACE Phantom 4WD
    4.5 rating
    Price Available Soon
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    Tata Hitachi Tata Hitachi Shinrai Power 4
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    Bull Machines Bull HD76 4WD
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs

    Popular Comparisons with JCB 2DX

    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Frequently Asked Question

    Ans.

    It depends on the work you do most days. Buy the Bull HD 100 4WD if you dig deep, lift heavy loads, or work on big and wet sites. It is strong and has four-wheel drive. Buy the JCB 2DX for light digging, small streets, and jobs near homes and towns. Do not buy the big machine for small work. You will pay more for power you do not use.

    Ans.

    The JCB 2DX uses much less fuel. It has a small engine, so it costs less to run each day. The Bull HD 100 4WD has a big engine, so it uses more fuel and costs more to run. But the big machine also does more work in a day. Think about how much fuel you can pay for every day before you choose.

    Ans.

    The JCB 2DX is easier to sell later. JCB is a very common name in India, and small machines have many buyers. So you can sell it fast and get a fair price. The Bull HD 100 4WD is a bigger and costlier machine, so fewer people look for it. It can still sell, but it may take more time to find the right buyer.

    Ans.

    Yes for the JCB 2DX, because JCB has service centres in most parts of India and parts come fast. For the Bull HD 100 4WD, first check if a service centre is near you before you buy. A big machine needs good service to keep working. If help is far away, one small problem can stop your work for many days.

    Ans.

    Take four-wheel drive only if your ground is wet, soft, or sloped. The Bull HD 100 4WD gives you strong grip on bad ground. If you work on hard, flat, and dry ground in towns, the two-wheel JCB 2DX is enough. It is lighter and saves fuel. Do not pay extra for four-wheel drive you will not use.

    Ans.

    Yes, very easily. Banks, finance companies, and dealers give loans for both machines. How much you pay each month depends on your down payment and your loan record. The bigger Bull machine will have a bigger monthly amount than the small JCB. Ask two or three lenders first. Do not take the first EMI offer.

    Bull HD100 4WD Vs JCB 2DX - Compare Price & Availability Across 600+ Locations in India

    Compare Bull HD100 4WD Vs JCB 2DX price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare