Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    Bull HD96 4WD VS CASE 770 NXe Series Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Bull HD96 4WDCASE 770 NXe Series
    Bull HD96 4WD VS CASE 770 NXe Series Backhoe Loader
    Bull HD 96 Backhoe Loader
    Bull HD96 4WD

    ₹ 33-37 Lakhs

    CASE 770 49 HP Price
    CASE 770 NXe Series

    ₹ 22-24 lakh

    Particulars Bull HD96 4WD CASE 770 NXe Series

    Bull HD96 4WD vs CASE 770 NXe Series: Which One to Buy?

    These two backhoe loaders sit in different power classes, so they suit different kinds of work. The Bull HD96 4WD is the stronger machine, built with four-wheel drive for tough, off-road or rural sites. The CASE 770 NXe Series is a lighter, fuel-efficient machine that is easier to move around tight or urban worksites.

    CASE is a long-established international brand with a wide dealer network across India, which matters for service and spares over the life of the machine. Choose the Bull HD96 4WD for rough ground and heavier digging, or the CASE 770 NXe Series for compact sites and steady fuel savings. See more CASE backhoe loaders, browse the full backhoe loader range, or read our backhoe loader buying guide.

    Bull HD96 4WD

    Pros:

    • Higher gross power at 96 HP for tough tasks
    • 4WD traction for better stability and off-road capability
    • Higher maximum speed of 40 km/hr improves work efficiency
    • Larger fuel capacity at 115 L for extended operation
    • Higher bucket digging force at 6072 kgf for stronger performance

    Cons:

    • Heavier machine weight might limit maneuverability in tight spaces
    • Larger size might not be suitable for smaller work sites

    CASE 770 NXe Series

    Pros:

    • Superior fuel efficiency with a 49.5 HP engine
    • Enhanced operator comfort for better work environment
    • Open Center Load Sensing system for advanced hydraulics

    Cons:

    • Lower gross power at 49.5 HP might affect performance for heavy-duty tasks
    • 2WD as standard might limit off-road performance compared to 4WD models
    • Lower maximum speed of 32.4 km/hr might reduce efficiency in certain scenarios

    Pros:

    Cons:

    Closing Recommendation

    These two backhoe loaders suit different kinds of sites. Choose the Bull HD96 4WD when your work needs more power and four-wheel traction for rough or off-road ground. Choose the CASE 770 NXe Series when fuel efficiency, smooth hydraulics and easy handling in tight spaces matter more. So match the machine to your work: Bull HD96 4WD for tough, off-road sites, CASE 770 NXe Series for compact, fuel-efficient jobs.

    Bull HD96 4WD Vs CASE 770 NXe Series Backhoe Loader Price, Technical Specifications & Features

    Brand Bull Backhoe Loader CASE Backhoe Loader
    Type 4WD 2WD
    Price ₹ 33-37 Lakhs ₹ 22-24 lakh
    Engine Kirloskar 96 HP FPT 49.5 HP
    Bucket 0.27 m³ 0.26 m³
    Shovel 1.1 m³ 1.1 m³
    Max Digging Depth 4600 mm 4400 mm
    Max Dump Height 2960 mm 2720 mm
    Weight 8150 Kg 7610 Kg
    Quick Overview:

    The BULL HD 96 4WD Backhoe Loader is designed for heavy-duty use, powered by a 96 HP (70.6 kW) Kirloskar engine with Carraro synchro-shuttle transmission, delivering strong torque and reliable operation in tough environments. The BULL HD 96 4WD features 4WD capability, 240 bar hydraulics, and 134 LPM pump flow, ensuring superior digging force, traction, and efficiency in high-load situations. The machine has a square-cut 90° foundation bucket, the highest breakout force in its class, and a heavy operating weight for better stability. Additional features include scratch-resistant paint, a comfortable cabin, and a low maintenance design. The BULL HD 96 backhoe loader price in India ranges from ₹33–37 lakh, making it a solid choice for contractors involved in infrastructure and heavy excavation work.

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    Bull HD96 4WD vs CASE 770 NXe Series: Which One to Buy?

    These two backhoe loaders sit in different power classes, so they suit different kinds of work. The Bull HD96 4WD is the stronger machine, built with four-wheel drive for tough, off-road or rural sites. The CASE 770 NXe Series is a lighter, fuel-efficient machine that is easier to move around tight or urban worksites.

    CASE is a long-established international brand with a wide dealer network across India, which matters for service and spares over the life of the machine. Choose the Bull HD96 4WD for rough ground and heavier digging, or the CASE 770 NXe Series for compact sites and steady fuel savings. See more CASE backhoe loaders, browse the full backhoe loader range, or read our backhoe loader buying guide.

    Bull HD96 4WD

    Pros:

    • Higher gross power at 96 HP for tough tasks
    • 4WD traction for better stability and off-road capability
    • Higher maximum speed of 40 km/hr improves work efficiency
    • Larger fuel capacity at 115 L for extended operation
    • Higher bucket digging force at 6072 kgf for stronger performance

    Cons:

    • Heavier machine weight might limit maneuverability in tight spaces
    • Larger size might not be suitable for smaller work sites

    CASE 770 NXe Series

    Pros:

    • Superior fuel efficiency with a 49.5 HP engine
    • Enhanced operator comfort for better work environment
    • Open Center Load Sensing system for advanced hydraulics

    Cons:

    • Lower gross power at 49.5 HP might affect performance for heavy-duty tasks
    • 2WD as standard might limit off-road performance compared to 4WD models
    • Lower maximum speed of 32.4 km/hr might reduce efficiency in certain scenarios

    Pros:

    Cons:

    Closing Recommendation

    These two backhoe loaders suit different kinds of sites. Choose the Bull HD96 4WD when your work needs more power and four-wheel traction for rough or off-road ground. Choose the CASE 770 NXe Series when fuel efficiency, smooth hydraulics and easy handling in tight spaces matter more. So match the machine to your work: Bull HD96 4WD for tough, off-road sites, CASE 770 NXe Series for compact, fuel-efficient jobs.

    Bull HD96 4WD Vs CASE 770 NXe Series Backhoe Loader Price, Technical Specifications & Features

    Bull HD96 4WD CASE 770 NXe Series
    Brand
    Bull Backhoe Loader CASE Backhoe Loader
    Type
    4WD 2WD
    Price
    ₹ 33-37 Lakhs ₹ 22-24 lakh
    Engine
    Kirloskar 96 HP FPT 49.5 HP
    Bucket
    0.27 m³ 0.26 m³
    Shovel
    1.1 m³ 1.1 m³
    Max Digging Depth
    4600 mm 4400 mm
    Max Dump Height
    2960 mm 2720 mm
    Weight
    8150 Kg 7610 Kg
    Quick Overview:

    The BULL HD 96 4WD Backhoe Loader is designed for heavy-duty use, powered by a 96 HP (70.6 kW) Kirloskar engine with Carraro synchro-shuttle transmission, delivering strong torque and reliable operation in tough environments. The BULL HD 96 4WD features 4WD capability, 240 bar hydraulics, and 134 LPM pump flow, ensuring superior digging force, traction, and efficiency in high-load situations. The machine has a square-cut 90° foundation bucket, the highest breakout force in its class, and a heavy operating weight for better stability. Additional features include scratch-resistant paint, a comfortable cabin, and a low maintenance design. The BULL HD 96 backhoe loader price in India ranges from ₹33–37 lakh, making it a solid choice for contractors involved in infrastructure and heavy excavation work.

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    Bull HD96 4WD Vs CASE 770 NXe Series Backhoe Loader Key Highlights

    Bull HD96 4WD CASE 770 NXe Series
    Engine Make KIRLOSKAR 4R 1040 FPT S8000
    Fuel Tank 115 L 129 L
    Max Torque 377 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Max Speed 40 km/hr 32.4 km/hr
    Hydraulic System 125 L 100 L
    Max Working Height 5920 mm 5490 mm
    Excavator Max Lift Capacity 1400 kg 1417 kg
    Loader Load Over Height 4140 mm 3640 mm
    Overall Length 6040 mm 5880 mm
    Wheel Base 2220 mm 2180 mm
    Bucket Digging Force 6072 kgf 5000 kgf
    Shovel Breakout Force 8183 kgf 5275 kgf
    Warranty 1 Year 1 Year
    AC Cabin Optional Optional
    GPS Standard Standard

    Bull HD96 4WD Vs CASE 770 NXe Series Backhoe Loader Key Highlights

    Bull HD96 4WD CASE 770 NXe Series
    Engine Make
    KIRLOSKAR 4R 1040 FPT S8000
    Fuel Tank
    115 L 129 L
    Max Torque
    377 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Max Speed
    40 km/hr 32.4 km/hr
    Hydraulic System
    125 L 100 L
    Max Working Height
    5920 mm 5490 mm
    Excavator Max Lift Capacity
    1400 kg 1417 kg
    Loader Load Over Height
    4140 mm 3640 mm
    Overall Length
    6040 mm 5880 mm
    Wheel Base
    2220 mm 2180 mm
    Bucket Digging Force
    6072 kgf 5000 kgf
    Shovel Breakout Force
    8183 kgf 5275 kgf
    Warranty
    1 Year 1 Year
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    Bull HD96 4WD Vs CASE 770 NXe Series Backhoe Loader Specifications

    Engine

    Bull HD96 4WD CASE 770 NXe Series
    Model Kirloskar 96 HP FPT 49.5 HP
    Type T EU STAGE II ; Diesel Engine; 4 Cylinders BS-III; Water Cooled.
    Gross Power 96 HP (71.6 kW) @ 2200 RPM 49.5 HP (37 kW)
    Max Torque 377 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Displacement NA 3.9 L
    Battery 12V / 180Ah 12V / 110 Ah
    Alternator NA NA

    Transmission

    Bull HD96 4WD CASE 770 NXe Series
    Type CARRARO synchro - shuttle transmission with integral torque converter CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    Bull HD96 4WD CASE 770 NXe Series
    Type Full power; front wheel hydraulic power steering with manual capability in the event of engine or hydraullic power failure. Power Steering
    Working Pressure 245 bar 140 bar

    Steering Turning Circle

    Bull HD96 4WD CASE 770 NXe Series
    Inner Wheels Braked - Outside Loader Bucket 8800 mm 4600 mm
    Inner Wheels Braked - Outside Wheels 6300 mm NA
    Inner Wheels not Braked - Outside Loader Bucket 11600 mm 5550 mm
    Inner Wheels not Braked - Outside Wheels 8900 mm NA

    Brakes

    Bull HD96 4WD CASE 770 NXe Series
    Service Hydraulically actuated, duel line, self adjusting, compensated oil immersed, multi-disc type Hydraulic foot operated; 2 disc per side
    Parking Hand operated; oil immersed multi disc on the rear axle. Mechanically actuated caliper type brake pack on Rear axle input shaft

    Tyres

    Bull HD96 4WD CASE 770 NXe Series
    Front 12.5 / 80 x 18 -12 PR 9 x 16 - 16 PR
    Rear 16.9 x 28 -12 PR (STD INDUSTRIAL TYRE) 16.9 x 28 - 12 PR

    Speed

    Bull HD96 4WD CASE 770 NXe Series
    Forward- 1st gear NA 5 km/hr
    Reverse- 1st gear NA 5.9 km/hr
    Forward- 2nd gear NA 7.9 km/hr
    Reverse- 2nd gear NA 9.4 km/hr
    Forward- 3rd gear 40 km/hr 16.9 km/hr
    Reverse- 3rd gear 9.3 km/hr 19.8 km/hr
    Forward- 4th gear NA 32.4 km/hr
    Reverse- 4th gear NA Not recommended

    Hydraulics

    Bull HD96 4WD CASE 770 NXe Series
    Type Gear Pump Open Center Load Sensing system; Axial Piston with Electric Displacement Control
    Maximum Pump Flow 134 L/min @ 2200 RPM 119 L/min
    System Pressure 240 bar 240 bar

    Axles

    Bull HD96 4WD CASE 770 NXe Series
    Rear Axle Drive axle rigidly mounted; incorporates Max-trac torque proportioning differential; driven by short propshaft from gear box. CARRARO 28.32M
    Front Axle Steer axle; centrally pivoted with oscillation angle ±16°. CNH PS1300 (2WD)

    Service Capacities

    Bull HD96 4WD CASE 770 NXe Series
    Fuel Tank 115 L 129 L
    Engine Coolant 17 L 20 L
    Engine Oil 12 L 8.6 L
    Hydraulic Tank 100 L 48 L
    Hydraulic System 125 L 100 L
    Transmission 19.5 L 18 L
    Rear Axle 17 L 17.1 L

    Excavator Performance

    Bull HD96 4WD CASE 770 NXe Series
    Maximum Digging Depth 4600 mm 4400 mm
    Reach-Ground Level to Rear Wheel Centre 6810 mm 6950 mm
    Reach-Ground Level to Slew Centre 5500 mm 5630 mm
    Reach at Full Height to Slew Centre 2850 mm 2150 mm
    Side Reach to Centre Line of Machine 6080 mm NA
    Maximum Working Height 5920 mm 5490 mm
    Maximum Load Over Height 4140 mm 3640 mm
    Bucket Rotation Angle 188° 185°
    Bucket Digging force 6072 kgf 5000 kgf
    Arm Digging force 3150 kgf 2751 kgf
    Maximum Lift Capacity 1400 kg 1417 kg
    Standard Bucket Capacity 0.27 m³ 0.26 m³
    Standard Bucket Width NA NA

    Loader Performance

    Bull HD96 4WD CASE 770 NXe Series
    Dump Height 2960 mm 2720 mm
    Load Over Height 3390 mm 3300 mm
    Pin Height 3610 mm 3580 mm
    Pin Forward Reach 420 mm 240 mm
    Reach At Ground 1470 mm 1980 mm
    Maximum Reach at Full Height 1280 mm 1190 mm
    Max Reach Full Height Dumped 890 mm 760 mm
    Below Ground Level Dig Depth 100 mm 110 mm
    Rollback at Ground 49° 33°
    Dump Angle 45° 45°
    Shovel Breakout Force 8183 kgf 5275 kgf
    Loader Arm Breakout Force 5251 kgf 5110 kgf
    Maximum Payload 1800 kg 1925 kg

    Overall Dimensions And Weight

    Bull HD96 4WD CASE 770 NXe Series
    Machine Weight 8150 kg 7610 kg
    Overall Length 6040 mm 5880 mm
    Wheelbase 2220 mm 2180 mm
    Slew Centre to Rear Axle Centre NA NA
    Minimum Ground Clearance 480 mm 380 mm
    Slew Ground Clearance 650 mm NA
    Height of Cabin 3000 mm 2880 mm
    Overall Height 3710 mm 3850 mm
    Track Width-Rear 1700 mm 1700 mm
    Track Width-Front 1930 mm 1880 mm
    Width Over Bucket 2350 mm 2280 mm

    Bull HD96 4WD Vs CASE 770 NXe Series Backhoe Loader Specifications

    Engine

    Bull HD96 4WD CASE 770 NXe Series
    Model
    Kirloskar 96 HP FPT 49.5 HP
    Type
    T EU STAGE II ; Diesel Engine; 4 Cylinders BS-III; Water Cooled.
    Gross Power
    96 HP (71.6 kW) @ 2200 RPM 49.5 HP (37 kW)
    Max Torque
    377 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Displacement
    NA 3.9 L
    Battery
    12V / 180Ah 12V / 110 Ah
    Alternator
    NA NA

    Transmission

    Bull HD96 4WD CASE 770 NXe Series
    Type
    CARRARO synchro - shuttle transmission with integral torque converter CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    Bull HD96 4WD CASE 770 NXe Series
    Type
    Full power; front wheel hydraulic power steering with manual capability in the event of engine or hydraullic power failure. Power Steering
    Working Pressure
    245 bar 140 bar

    Steering Turning Circle

    Bull HD96 4WD CASE 770 NXe Series
    Inner Wheels Braked - Outside Loader Bucket
    8800 mm 4600 mm
    Inner Wheels Braked - Outside Wheels
    6300 mm NA
    Inner Wheels not Braked - Outside Loader Bucket
    11600 mm 5550 mm
    Inner Wheels not Braked - Outside Wheels
    8900 mm NA

    Brakes

    Bull HD96 4WD CASE 770 NXe Series
    Service
    Hydraulically actuated, duel line, self adjusting, compensated oil immersed, multi-disc type Hydraulic foot operated; 2 disc per side
    Parking
    Hand operated; oil immersed multi disc on the rear axle. Mechanically actuated caliper type brake pack on Rear axle input shaft

    Tyres

    Bull HD96 4WD CASE 770 NXe Series
    Front
    12.5 / 80 x 18 -12 PR 9 x 16 - 16 PR
    Rear
    16.9 x 28 -12 PR (STD INDUSTRIAL TYRE) 16.9 x 28 - 12 PR

    Speed

    Bull HD96 4WD CASE 770 NXe Series
    Forward- 1st gear
    NA 5 km/hr
    Reverse- 1st gear
    NA 5.9 km/hr
    Forward- 2nd gear
    NA 7.9 km/hr
    Reverse- 2nd gear
    NA 9.4 km/hr
    Forward- 3rd gear
    40 km/hr 16.9 km/hr
    Reverse- 3rd gear
    9.3 km/hr 19.8 km/hr
    Forward- 4th gear
    NA 32.4 km/hr
    Reverse- 4th gear
    NA Not recommended

    Hydraulics

    Bull HD96 4WD CASE 770 NXe Series
    Type
    Gear Pump Open Center Load Sensing system; Axial Piston with Electric Displacement Control
    Maximum Pump Flow
    134 L/min @ 2200 RPM 119 L/min
    System Pressure
    240 bar 240 bar

    Axles

    Bull HD96 4WD CASE 770 NXe Series
    Rear Axle
    Drive axle rigidly mounted; incorporates Max-trac torque proportioning differential; driven by short propshaft from gear box. CARRARO 28.32M
    Front Axle
    Steer axle; centrally pivoted with oscillation angle ±16°. CNH PS1300 (2WD)

    Service Capacities

    Bull HD96 4WD CASE 770 NXe Series
    Fuel Tank
    115 L 129 L
    Engine Coolant
    17 L 20 L
    Engine Oil
    12 L 8.6 L
    Hydraulic Tank
    100 L 48 L
    Hydraulic System
    125 L 100 L
    Transmission
    19.5 L 18 L
    Rear Axle
    17 L 17.1 L

    Excavator Performance

    Bull HD96 4WD CASE 770 NXe Series
    Maximum Digging Depth
    4600 mm 4400 mm
    Reach-Ground Level to Rear Wheel Centre
    6810 mm 6950 mm
    Reach-Ground Level to Slew Centre
    5500 mm 5630 mm
    Reach at Full Height to Slew Centre
    2850 mm 2150 mm
    Side Reach to Centre Line of Machine
    6080 mm NA
    Maximum Working Height
    5920 mm 5490 mm
    Maximum Load Over Height
    4140 mm 3640 mm
    Bucket Rotation Angle
    188° 185°
    Bucket Digging force
    6072 kgf 5000 kgf
    Arm Digging force
    3150 kgf 2751 kgf
    Maximum Lift Capacity
    1400 kg 1417 kg
    Standard Bucket Capacity
    0.27 m³ 0.26 m³
    Standard Bucket Width
    NA NA

    Loader Performance

    Bull HD96 4WD CASE 770 NXe Series
    Dump Height
    2960 mm 2720 mm
    Load Over Height
    3390 mm 3300 mm
    Pin Height
    3610 mm 3580 mm
    Pin Forward Reach
    420 mm 240 mm
    Reach At Ground
    1470 mm 1980 mm
    Maximum Reach at Full Height
    1280 mm 1190 mm
    Max Reach Full Height Dumped
    890 mm 760 mm
    Below Ground Level Dig Depth
    100 mm 110 mm
    Rollback at Ground
    49° 33°
    Dump Angle
    45° 45°
    Shovel Breakout Force
    8183 kgf 5275 kgf
    Loader Arm Breakout Force
    5251 kgf 5110 kgf
    Maximum Payload
    1800 kg 1925 kg

    Overall Dimensions And Weight

    Bull HD96 4WD CASE 770 NXe Series
    Machine Weight
    8150 kg 7610 kg
    Overall Length
    6040 mm 5880 mm
    Wheelbase
    2220 mm 2180 mm
    Slew Centre to Rear Axle Centre
    NA NA
    Minimum Ground Clearance
    480 mm 380 mm
    Slew Ground Clearance
    650 mm NA
    Height of Cabin
    3000 mm 2880 mm
    Overall Height
    3710 mm 3850 mm
    Track Width-Rear
    1700 mm 1700 mm
    Track Width-Front
    1930 mm 1880 mm
    Width Over Bucket
    2350 mm 2280 mm

    Popular Comparisons with Bull HD96 4WD

    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Tata Hitachi Tata Hitachi Shinrai Power
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    BEML BEML BL9H 4×4
    4.5 rating
    ₹32 - 36 lakhs
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Escorts Kubota Escorts Jungli HT
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    ACE ACE Phantom 4WD N
    4.5 rating
    Price Available Soon
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    ACE ACE Phantom 4WD
    4.5 rating
    Price Available Soon
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Tata Hitachi Tata Hitachi Shinrai Power 4
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Bull Machines Bull HD76 4WD
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs

    Popular Comparisons with CASE 770 NXe Series

    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    JCB JCB 2DX
    4.5 rating
    ₹ 27-29 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Frequently Asked Question

    Ans.

    Yes, the Bull HD96 4WD is a good fit for rural or off-road sites. Its four-wheel drive gives it better grip on loose, muddy or uneven ground than a standard two-wheel drive machine.

    Ans.

    The CASE 770 NXe Series is easier to move around a tight worksite. It is lighter and smaller than the Bull HD96 4WD, which needs more room to work comfortably.

    Ans.

    Yes, CASE is a long-established international brand with a wide dealer network in India. This makes it easier to find service and spare parts compared to newer or smaller brands.

    Ans.

    The CASE 770 NXe Series suits a small contractor better. Its fuel-efficient engine keeps running costs down for jobs that do not need heavy-duty power every day.

    Ans.

    Yes, four-wheel drive helps a lot on loose or wet ground. It gives all four wheels power at once, so the machine does not get stuck as easily during the monsoon or on rural roads.

    Bull HD96 4WD Vs CASE 770 NXe Series - Compare Price & Availability Across 600+ Locations in India

    Compare Bull HD96 4WD Vs CASE 770 NXe Series price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare