CONMAT CSLM 2800 vs Fiori DBS 4300: the two differ on 38 of 42 listed specs. The main differences are Engine (KOEL 49 HP vs Mahindra 110 HP), Bucket Capacity (420 L vs 560 L), Fuel Tank (100 L vs 110 L), Drum Capacity (2.8 m³ vs 4.3 m³). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
CONMAT CSLM 2800 vs Fiori DBS 4300: the two differ on 38 of 42 listed specs. The main differences are Engine (KOEL 49 HP vs Mahindra 110 HP), Bucket Capacity (420 L vs 560 L), Fuel Tank (100 L vs 110 L), Drum Capacity (2.8 m³ vs 4.3 m³). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
CONMAT CSLM 2800
₹ 29 – 31 Lakhs
Fiori DBS 4300
₹ 52 – 54 Lakhs
Particulars
CONMAT CSLM 2800
Fiori DBS 4300
CONMAT CSLM 2800 vs Fiori DBS 4300: Which Self Loading Mixer to Buy?
The difference here is size, and size decides your day. The CONMAT CSLM 2800 has the smaller drum, so it turns and works in tight plots, village lanes and small building jobs where a big machine cannot enter. The Fiori DBS 4300 carries more in one go and gives tighter control over the mix, so it suits bigger pours where you have to keep a slab or a raft going without a break.
Count your normal day before you count the drum. If you pour small footings and slabs, the bigger drum sits half empty and you pay for diesel you did not need. If you pour a full slab, the smaller machine makes you run more trips and your labour waits. Also plan how the machine moves between sites and who will train the driver on the loading arm. See the Fiori mixer range, the self loading mixer range, or read our guide to types of concrete mixers.
CONMAT CSLM 2800 Self Loading Concrete Mixer
Pros:
Features reversible operator post for versatility in operation
Equipped with electronic weigh batching for accurate mixtures
Utilizes spiral blades for a fast and homogenous mix
Powered by a 49 HP KOEL 4R810T engine with torque sufficient for various sites
4-wheel drive hydrostatic transmission ensures good maneuverability
3 selectable steering modes enhance handling
Good payload with a drum capacity of 2.8 m³
Equipped with a water pump capacity of 230 L/min for efficient mixing
Cons:
Lower engine power compared to the Fiori DBS 4300
Smaller fuel and hydraulic tank capacities
Lower maximum speed and gradeability
Smaller bucket capacity
No specified drum slewing degree, potentially less discharge flexibility
Fiori DBS 4300 Self Loading Concrete Mixer
Pros:
High productivity enabled by compact design and agility
High engine power of 110 HP for demanding tasks
360° discharge flexibility with a drum slewing degree of 245°
Higher daily productivity with a large drum capacity of 4.3 m³
Oil-bath disc service and emergency brakes for improved safety
Load-sensing power steering contributes to precise control
Certified quality of concrete with CBV 2.0 computerized batching
Cons:
Heavier unladen weight compared to CONMAT CSLM 2800, which might require more power for transport
No specified water pump capacity
Potentially more complex controls due to more advanced features
Pros:
Cons:
Closing Recommendation
Pick by the size of your normal pour, not by the biggest job you hope to get. Take the CONMAT CSLM 2800 if you work on small plots, village sites and narrow lanes, where turning space is short and each pour is small. Take the Fiori DBS 4300 if you pour slabs and rafts, need more concrete in a day and want tighter control over the mix when an engineer is checking the work. So match the machine to your work: CONMAT CSLM 2800 for small tight sites, Fiori DBS 4300 for big steady pours with strict mix control.
CONMAT CSLM 2800 Vs Fiori DBS 4300 Self Loading Price, Technical Specifications & Features
Featuring reversible operator post, electronic weigh batching, and spiral blades, CONMAT CSLM 2800 self-loading concrete mixer ensures accurate, fast mixing for diverse construction requirements.
Compact and agile, the DBS 4300 self-loading mixer ensures high daily productivity, 360° discharge flexibility, and certified quality concrete with CBV 2.0.
CONMAT CSLM 2800 vs Fiori DBS 4300: Which Self Loading Mixer to Buy?
The difference here is size, and size decides your day. The CONMAT CSLM 2800 has the smaller drum, so it turns and works in tight plots, village lanes and small building jobs where a big machine cannot enter. The Fiori DBS 4300 carries more in one go and gives tighter control over the mix, so it suits bigger pours where you have to keep a slab or a raft going without a break.
Count your normal day before you count the drum. If you pour small footings and slabs, the bigger drum sits half empty and you pay for diesel you did not need. If you pour a full slab, the smaller machine makes you run more trips and your labour waits. Also plan how the machine moves between sites and who will train the driver on the loading arm. See the Fiori mixer range, the self loading mixer range, or read our guide to types of concrete mixers.
CONMAT CSLM 2800 Self Loading Concrete Mixer
Pros:
Features reversible operator post for versatility in operation
Equipped with electronic weigh batching for accurate mixtures
Utilizes spiral blades for a fast and homogenous mix
Powered by a 49 HP KOEL 4R810T engine with torque sufficient for various sites
4-wheel drive hydrostatic transmission ensures good maneuverability
3 selectable steering modes enhance handling
Good payload with a drum capacity of 2.8 m³
Equipped with a water pump capacity of 230 L/min for efficient mixing
Cons:
Lower engine power compared to the Fiori DBS 4300
Smaller fuel and hydraulic tank capacities
Lower maximum speed and gradeability
Smaller bucket capacity
No specified drum slewing degree, potentially less discharge flexibility
Fiori DBS 4300 Self Loading Concrete Mixer
Pros:
High productivity enabled by compact design and agility
High engine power of 110 HP for demanding tasks
360° discharge flexibility with a drum slewing degree of 245°
Higher daily productivity with a large drum capacity of 4.3 m³
Oil-bath disc service and emergency brakes for improved safety
Load-sensing power steering contributes to precise control
Certified quality of concrete with CBV 2.0 computerized batching
Cons:
Heavier unladen weight compared to CONMAT CSLM 2800, which might require more power for transport
No specified water pump capacity
Potentially more complex controls due to more advanced features
Pros:
Cons:
Closing Recommendation
Pick by the size of your normal pour, not by the biggest job you hope to get. Take the CONMAT CSLM 2800 if you work on small plots, village sites and narrow lanes, where turning space is short and each pour is small. Take the Fiori DBS 4300 if you pour slabs and rafts, need more concrete in a day and want tighter control over the mix when an engineer is checking the work. So match the machine to your work: CONMAT CSLM 2800 for small tight sites, Fiori DBS 4300 for big steady pours with strict mix control.
CONMAT CSLM 2800 Vs Fiori DBS 4300 Self Loading Price, Technical Specifications & Features
Featuring reversible operator post, electronic weigh batching, and spiral blades, CONMAT CSLM 2800 self-loading concrete mixer ensures accurate, fast mixing for diverse construction requirements.
Compact and agile, the DBS 4300 self-loading mixer ensures high daily productivity, 360° discharge flexibility, and certified quality concrete with CBV 2.0.
Questions buyers ask about the CONMAT CSLM 2800 vs Fiori DBS 4300
Ans.
The CONMAT CSLM 2800. Its smaller body turns inside a plot, enters narrow lanes and matches the pour size of footings, small slabs and boundary walls. A bigger machine on that work just burns more diesel and struggles to turn.
Ans.
The Fiori DBS 4300, because it carries more in every batch. Fewer trips means the pour keeps moving and your labour does not stand idle. On a long slab or a raft that steady flow is worth more than any single spec on the sheet.
Ans.
Yes, both do. That is the point of a self loading mixer: the same machine picks up the material, mixes it and drives to the pour, so you do not need a separate loader and a separate mixer. Keep the loading arm greased, because that joint takes the most work every day.
Ans.
Control the water and keep the same loading order every batch. The Fiori DBS 4300 helps more here with its stronger mix control, which matters when an engineer is checking your concrete. On any machine, train one driver properly and let him do the batching, instead of changing hands every week.
Ans.
About a week of steady practice for the loading arm and the drum, and a little longer to get the mix right every time. Ask the dealer to send a trainer for the first days. A driver who loads clean and washes the drum daily will save you more money than any small saving on the machine itself.
Ans.
The CONMAT CSLM 2800, because it is smaller and lighter to load on a trailer. The Fiori DBS 4300 travels fine too, but check the approach road and the gate width of your site first. Many owners lose a day because the machine reached the site and could not get in.
CONMAT CSLM 2800 Vs Fiori DBS 4300 - Compare Price & Availability Across 600+ Locations in India
Compare CONMAT CSLM 2800 Vs Fiori DBS 4300 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
