Popular Products
Popular Comparisons
Contact Us



    Your Captcha*

    captcha

    Contact Info
    Chat with us

    Fine FMG 585HD VS Fine FMG 130 Motor Grader

    Fine FMG 585HD
    ₹ 40-50 Lakhs*

    Fine FMG 585HD

    • Engine

      Ashok Leyland 130 HP

    • Blade

      3050 mm

    • Weight

      9495 kg

    • Turning Radius

      9000 mm

    • Max Forward Speed

      20 km/hr

    • Max Reverse Speed

      19 km/hr
    Small (4-12 Ton)
    Fine FMG 130
    ₹ 30-45 Lakhs*

    Fine FMG 130

    • Engine

      Ashok Leyland 130 HP

    • Blade

      3360 mm

    • Weight

      9100 kg

    • Turning Radius

      9000 mm

    • Max Forward Speed

      40 km/hr

    • Max Reverse Speed

      30 km/hr
    Small (4-12 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Fine FMG 585HDFine FMG 130
    Fine FMG 585HD VS Fine FMG 130 Motor Grader
    Fine 585 Motor Grader Price in India
    Fine FMG 585HD

    ₹ 40-50 Lakhs

    Fine 130 Motor Grader
    Fine FMG 130

    ₹ 30-45 Lakhs

    Particulars Fine FMG 585HD Fine FMG 130

    Fine FMG 130 vs FMG 585HD: Which One to Buy?

    Both these graders are made by Fine, an Indian brand, so parts and service are easy to find and the price stays friendly. The tables below give the numbers. Here is the simple difference. The Fine FMG 130 runs at a higher speed, has a longer blade, and comes with an AC cabin and GPS as standard. The Fine FMG 585HD gives strong pull at low engine speed and a good hydraulic pump, so it works hard on tough grading.

    So the choice is speed, a wider cut, and standard comfort, or strong low-speed pull for tough work. If you cover long roads and want a cool cabin and GPS without extra cost, the FMG 130 fits. If your ground is hard and you need steady pull at low speed, the FMG 585HD suits you. Both are affordable and easy to service. See the full Fine grader range, all motor graders, or our equipment brands guide.

    Fine FMG 585HD

    Pros:

    • Higher engine torque at lower rpm (480 Nm @ 1500 rpm) for better low-speed grunt
    • Option for AC cabin increases operator comfort
    • Larger fuel tank capacity (140 L) suggests longer operation without refueling
    • Variable flow piston pump provides efficient hydraulic response

    Cons:

    • Lower maximum forward and reverse speeds (20 km/hr and 19 km/hr, respectively)
    • AC cabin is optional, not standard

    Fine FMG 130

    Pros:

    • Higher maximum forward and reverse speeds (40 km/hr and 30 km/hr, respectively) for quicker task completion
    • Longer blade length (3360 mm) can cover a larger area
    • AC cabin and GPS come as standard features, adding value
    • Less expensive with a price range of ₹ 60-65 Lakhs

    Cons:

    • Lower pump flow rate (60 L/min) which may result in slower hydraulic operations

    Pros:

    Cons:

    Closing Recommendation

    Both are affordable Fine graders with easy Indian parts, so pick by your daily work. Choose the FMG 130 when you cover long roads and want higher speed, a wider blade, and a cool AC cabin with GPS as standard. Choose the FMG 585HD when your ground is hard and you need strong pull at low engine speed for tough grading. Both sell to small firms later. So match the machine to your work: FMG 130 for speed, width, and standard comfort, FMG 585HD for strong low-speed pull on hard ground.

    Fine FMG 585HD Vs Fine FMG 130 Motor Grader Price, Technical Specifications & Features

    Brand Fine Equipments Motor grader Fine Equipments Motor grader
    Type Small (4-12 Ton) Small (4-12 Ton)
    Price ₹ 40-50 Lakhs ₹ 30-45 Lakhs
    Engine Ashok Leyland 130 HP Ashok Leyland 130 HP
    Weight 9495 kg 9100 kg
    Min. Turning Radius 9000 mm 9000 mm
    Max. Forward Speed 20 km/hr 40 km/hr
    Max. Reverse Speed 19 km/hr 30 km/hr
    Quick Overview:

    The Fine Equipments FMG 585HD is a compact grader machine in India designed for road construction and land development projects. It suits contractors working on small to medium infrastructure and grading projects. Powered by a 130 HP Ashok Leyland diesel engine, it delivers strong torque at low RPM for heavy-duty tasks. The fuel-efficient engine helps lower operating costs during long hours. Its 3.05-meter moldboard promotes better grading productivity with fewer passes. The load-sensing hydraulic system allows for precise blade control and quicker response. Power-shift transmission ensures smooth operation and better control on tight job sites. Articulation and steering enhance maneuverability in confined areas. The operator cabin is designed for comfort, visibility, and easy controls to boost productivity. The Fine FMG 585HD motor grader price in India is expected to range from ₹40 to ₹50 lakh. This machine from Fine Construction Equipment is a great investment for buyers wanting efficient, durable, and cost-effective grading machines.

    The Fine Equipments FMG 130 is a dependable grader machine in India for road construction and land leveling. It is perfect for contractors managing small to medium infrastructure and maintenance projects. Powered by a 130 HP Ashok Leyland BS IV engine, this grader machine performs well under load. The fuel-efficient engine helps lower operating costs at various job sites. Its 3.35-meter moldboard allows for wider coverage and quicker grading. The hydraulic system provides precise blade control for accurate surface finishing. Articulated steering enhances maneuverability in tight construction spaces. The operator cabin is designed for comfort, visibility, and easy control during long hours. The Fine FMG 130 motor grader price in India ranges from ₹35 to ₹45 lakh. This machine from Fine Construction Equipment is a smart choice for buyers looking for durable, efficient, and cost-effective grading solutions.

    Fine FMG 130 vs FMG 585HD: Which One to Buy?

    Both these graders are made by Fine, an Indian brand, so parts and service are easy to find and the price stays friendly. The tables below give the numbers. Here is the simple difference. The Fine FMG 130 runs at a higher speed, has a longer blade, and comes with an AC cabin and GPS as standard. The Fine FMG 585HD gives strong pull at low engine speed and a good hydraulic pump, so it works hard on tough grading.

    So the choice is speed, a wider cut, and standard comfort, or strong low-speed pull for tough work. If you cover long roads and want a cool cabin and GPS without extra cost, the FMG 130 fits. If your ground is hard and you need steady pull at low speed, the FMG 585HD suits you. Both are affordable and easy to service. See the full Fine grader range, all motor graders, or our equipment brands guide.

    Fine FMG 585HD

    Pros:

    • Higher engine torque at lower rpm (480 Nm @ 1500 rpm) for better low-speed grunt
    • Option for AC cabin increases operator comfort
    • Larger fuel tank capacity (140 L) suggests longer operation without refueling
    • Variable flow piston pump provides efficient hydraulic response

    Cons:

    • Lower maximum forward and reverse speeds (20 km/hr and 19 km/hr, respectively)
    • AC cabin is optional, not standard

    Fine FMG 130

    Pros:

    • Higher maximum forward and reverse speeds (40 km/hr and 30 km/hr, respectively) for quicker task completion
    • Longer blade length (3360 mm) can cover a larger area
    • AC cabin and GPS come as standard features, adding value
    • Less expensive with a price range of ₹ 60-65 Lakhs

    Cons:

    • Lower pump flow rate (60 L/min) which may result in slower hydraulic operations

    Pros:

    Cons:

    Closing Recommendation

    Both are affordable Fine graders with easy Indian parts, so pick by your daily work. Choose the FMG 130 when you cover long roads and want higher speed, a wider blade, and a cool AC cabin with GPS as standard. Choose the FMG 585HD when your ground is hard and you need strong pull at low engine speed for tough grading. Both sell to small firms later. So match the machine to your work: FMG 130 for speed, width, and standard comfort, FMG 585HD for strong low-speed pull on hard ground.

    Fine FMG 585HD Vs Fine FMG 130 Motor Grader Price, Technical Specifications & Features

    Fine FMG 585HD Fine FMG 130
    Brand
    Fine Equipments Motor grader Fine Equipments Motor grader
    Type
    Small (4-12 Ton) Small (4-12 Ton)
    Price
    ₹ 40-50 Lakhs ₹ 30-45 Lakhs
    Engine
    Ashok Leyland 130 HP Ashok Leyland 130 HP
    Weight
    9495 kg 9100 kg
    Min. Turning Radius
    9000 mm 9000 mm
    Max. Forward Speed
    20 km/hr 40 km/hr
    Max. Reverse Speed
    19 km/hr 30 km/hr
    Quick Overview:

    The Fine Equipments FMG 585HD is a compact grader machine in India designed for road construction and land development projects. It suits contractors working on small to medium infrastructure and grading projects. Powered by a 130 HP Ashok Leyland diesel engine, it delivers strong torque at low RPM for heavy-duty tasks. The fuel-efficient engine helps lower operating costs during long hours. Its 3.05-meter moldboard promotes better grading productivity with fewer passes. The load-sensing hydraulic system allows for precise blade control and quicker response. Power-shift transmission ensures smooth operation and better control on tight job sites. Articulation and steering enhance maneuverability in confined areas. The operator cabin is designed for comfort, visibility, and easy controls to boost productivity. The Fine FMG 585HD motor grader price in India is expected to range from ₹40 to ₹50 lakh. This machine from Fine Construction Equipment is a great investment for buyers wanting efficient, durable, and cost-effective grading machines.

    The Fine Equipments FMG 130 is a dependable grader machine in India for road construction and land leveling. It is perfect for contractors managing small to medium infrastructure and maintenance projects. Powered by a 130 HP Ashok Leyland BS IV engine, this grader machine performs well under load. The fuel-efficient engine helps lower operating costs at various job sites. Its 3.35-meter moldboard allows for wider coverage and quicker grading. The hydraulic system provides precise blade control for accurate surface finishing. Articulated steering enhances maneuverability in tight construction spaces. The operator cabin is designed for comfort, visibility, and easy control during long hours. The Fine FMG 130 motor grader price in India ranges from ₹35 to ₹45 lakh. This machine from Fine Construction Equipment is a smart choice for buyers looking for durable, efficient, and cost-effective grading solutions.

    Fine FMG 585HD Vs Fine FMG 130 Motor Grader Key Highlights

    Fine FMG 585HD Fine FMG 130
    Engine Make Ashok Leyland Ashok Leyland H4C413022-BSIV
    Max Torque 480 Nm @ 1500 rpm 480 Nm @ 1800 rpm
    Fuel Tank 140 L 200 L
    Hydraulic System 150 L NA
    Tires 11 x 20" 16./70 x 124 16 PR
    Frame Height NA NA
    Max Lift Above Ground 460 mm 400 mm
    Max Cutting Depth NA 350 mm
    Blade Pitch Angle 40° forward; 3° backward 35° forward; 5° backward
    Wheel Base 5300 mm 5400 mm
    Overall Length 9100 mm 8700 mm
    Overall Height 3550 mm 2940 mm
    Warranty 1 Yr. / 1000 hr. 1 Yr. / 1000 hr.
    AC Cabin Optional Standard
    GPS NA Standard

    Fine FMG 585HD Vs Fine FMG 130 Motor Grader Key Highlights

    Fine FMG 585HD Fine FMG 130
    Engine Make
    Ashok Leyland Ashok Leyland H4C413022-BSIV
    Max Torque
    480 Nm @ 1500 rpm 480 Nm @ 1800 rpm
    Fuel Tank
    140 L 200 L
    Hydraulic System
    150 L NA
    Tires
    11 x 20" 16./70 x 124 16 PR
    Frame Height
    NA NA
    Max Lift Above Ground
    460 mm 400 mm
    Max Cutting Depth
    NA 350 mm
    Blade Pitch Angle
    40° forward; 3° backward 35° forward; 5° backward
    Wheel Base
    5300 mm 5400 mm
    Overall Length
    9100 mm 8700 mm
    Overall Height
    3550 mm 2940 mm
    Warranty
    1 Yr. / 1000 hr. 1 Yr. / 1000 hr.
    AC Cabin
    Optional Standard
    GPS
    NA Standard

    Fine FMG 585HD Vs Fine FMG 130 Motor Grader Specifications

    Engine

    Fine FMG 585HD Fine FMG 130
    Model Ashok Leyland 130 HP Ashok Leyland 130 HP
    Fuel Diesel Diesel
    Type Four Stroke; Turbocharged; Charge Air Cooled; Electronic Common Rail Direct Injection BSIV; Turbocharged
    Gross Power 130 HP (97 kW) @ 2200 rpm 130 HP (97 kW) @ 2200 rpm
    Number Of Cylinders 4 in-line NA
    Max Torque 480 Nm @ 1500 rpm 480 Nm @ 1800 rpm
    Displacement 3.84 L NA
    Battery 12V / 180Ah 12 V / 125 AH
    Alternator 12V / 90A NA

    Transmission

    Fine FMG 585HD Fine FMG 130
    Type Power-Shift Transmission Belian

    Speed

    Fine FMG 585HD Fine FMG 130
    Max. Forward Speed 20 km/hr 40 km/hr
    Max. Reverse Speed 19 km/hr 30 km/hr

    Axles

    Fine FMG 585HD Fine FMG 130
    Rear Axle Heavy-duty tandem axle with central planetary reduction with no spin differential lock. Tandem Axle with hydraulic service brake and SAHR parking brake. Driven; Non steerable; central pivoted 5 degree oscillation angle.
    Front Axle Fully welded steel structure for torsional strength. Non Driven; steerable; central pivoted

    Tyres

    Fine FMG 585HD Fine FMG 130
    Size 11 x 20" 16./70 x 124 16 PR

    Steering

    Fine FMG 585HD Fine FMG 130
    Type Hydraulic power steering Power Steering
    Minimum Turning Radius 9000 mm 9000 mm
    Steering-Angle 45° NA

    Brakes

    Fine FMG 585HD Fine FMG 130
    Service Foot pedal operated hydraulic brake through master cylinder. Disc (Foot Operated)
    Parking Spring Applied; Hydraulic Release Type parking brake operated through solenoid. Disc Brake Mounted on transmission drive shaft mechanically operated.

    Frame

    Fine FMG 585HD Fine FMG 130
    Front Frame Height NA NA
    Front Frame Width NA NA
    Front Frame Thickness NA NA

    MoldBoard

    Fine FMG 585HD Fine FMG 130
    Type NA NA
    Blade Length 3050 mm 3360 mm
    Blade Height 494 mm 510 mm
    Blade Thickness NA 16 mm
    Cutting Edge NA NA
    Blade Pull NA NA
    Blade Down Pressure NA NA
    Moldboard Side Shift (Right/Left) 914 mm 515 mm / 515 mm
    Maximum Shoulder Reach (Right/Left) 744 mm NA
    Maximum Lift Above Ground 460 mm 400 mm
    Maximum Cutting Depth NA 350 mm
    Blade Pitch Angle 40° forward; 3° backward 35° forward; 5° backward

    Hydraulics

    Fine FMG 585HD Fine FMG 130
    Type Closer Centre -Variable flow; load sensing axial piston pump with load-independent post-compensated valve with over-centre valve on all functions. Fixed Displacement Gear Pump.
    Maximum Pump Flow 118 L/min 60 L/min
    Maximum System Pressure 22.0 MPa 20.0 MPa

    Service Capacities

    Fine FMG 585HD Fine FMG 130
    Fuel Tank 140 L 200 L
    Cooling System 18 L 20 L
    Engine Oil 10 L 13 L
    DEF Tank NA NA
    Trasnsmission Oil 35 L 15 L
    Final Drive NA 5 L
    Hydraulic System 150 L NA
    Circle Reverse Housing 5 L NA

    Weight

    Fine FMG 585HD Fine FMG 130
    Gross Vehicle Weight 9495 kg 9100 kg
    Moldboard Base 2100 mm 2100 mm
    Wheelbase 5300 mm 5400 mm
    Tandem Wheelbase 1300 mm NA
    Width of Standard Moldboard 3050 mm 3660 mm
    Overall Length 9100 mm 8700 mm
    Tread Gauge NA 1660 mm
    Width of Tires 2050 mm 2066 mm
    Articulation, left or right 20° NA
    Minimum Ground Clearence NA NA

    Fine FMG 585HD Vs Fine FMG 130 Motor Grader Specifications

    Engine

    Fine FMG 585HD Fine FMG 130
    Model
    Ashok Leyland 130 HP Ashok Leyland 130 HP
    Fuel
    Diesel Diesel
    Type
    Four Stroke; Turbocharged; Charge Air Cooled; Electronic Common Rail Direct Injection BSIV; Turbocharged
    Gross Power
    130 HP (97 kW) @ 2200 rpm 130 HP (97 kW) @ 2200 rpm
    Number Of Cylinders
    4 in-line NA
    Max Torque
    480 Nm @ 1500 rpm 480 Nm @ 1800 rpm
    Displacement
    3.84 L NA
    Battery
    12V / 180Ah 12 V / 125 AH
    Alternator
    12V / 90A NA

    Speed

    Fine FMG 585HD Fine FMG 130
    Max. Forward Speed
    20 km/hr 40 km/hr
    Max. Reverse Speed
    19 km/hr 30 km/hr

    Axles

    Fine FMG 585HD Fine FMG 130
    Rear Axle
    Heavy-duty tandem axle with central planetary reduction with no spin differential lock. Tandem Axle with hydraulic service brake and SAHR parking brake. Driven; Non steerable; central pivoted 5 degree oscillation angle.
    Front Axle
    Fully welded steel structure for torsional strength. Non Driven; steerable; central pivoted

    Tyres

    Fine FMG 585HD Fine FMG 130
    Size
    11 x 20" 16./70 x 124 16 PR

    Steering

    Fine FMG 585HD Fine FMG 130
    Type
    Hydraulic power steering Power Steering
    Minimum Turning Radius
    9000 mm 9000 mm
    Steering-Angle
    45° NA

    Brakes

    Fine FMG 585HD Fine FMG 130
    Service
    Foot pedal operated hydraulic brake through master cylinder. Disc (Foot Operated)
    Parking
    Spring Applied; Hydraulic Release Type parking brake operated through solenoid. Disc Brake Mounted on transmission drive shaft mechanically operated.

    Frame

    Fine FMG 585HD Fine FMG 130
    Front Frame Height
    NA NA
    Front Frame Width
    NA NA
    Front Frame Thickness
    NA NA

    Moldboard

    Fine FMG 585HD Fine FMG 130
    Type
    NA NA
    Blade Length
    3050 mm 3360 mm
    Blade Height
    494 mm 510 mm
    Blade Thickness
    NA 16 mm
    Cutting Edge
    NA NA
    Blade Pull
    NA NA
    Blade Down Pressure
    NA NA
    Moldboard Side Shift (Right/Left)
    914 mm 515 mm / 515 mm
    Maximum Shoulder Reach (Right/Left)
    744 mm NA
    Maximum Lift Above Ground
    460 mm 400 mm
    Maximum Cutting Depth
    NA 350 mm
    Blade Pitch Angle
    40° forward; 3° backward 35° forward; 5° backward

    Hydraulics

    Fine FMG 585HD Fine FMG 130
    Type
    Closer Centre -Variable flow; load sensing axial piston pump with load-independent post-compensated valve with over-centre valve on all functions. Fixed Displacement Gear Pump.
    Maximum Pump Flow
    118 L/min 60 L/min
    Maximum System Pressure
    22.0 MPa 20.0 MPa

    Service Capacities

    Fine FMG 585HD Fine FMG 130
    Fuel Tank
    140 L 200 L
    Cooling System
    18 L 20 L
    Engine Oil
    10 L 13 L
    DEF Tank
    NA NA
    Trasnsmission Oil
    35 L 15 L
    Final Drive
    NA 5 L
    Hydraulic System
    150 L NA
    Circle Reverse Housing
    5 L NA

    Weight

    Fine FMG 585HD Fine FMG 130
    Gross Vehicle Weight
    9495 kg 9100 kg
    Moldboard Base
    2100 mm 2100 mm
    Wheelbase
    5300 mm 5400 mm
    Tandem Wheelbase
    1300 mm NA
    Width of Standard Moldboard
    3050 mm 3660 mm
    Overall Length
    9100 mm 8700 mm
    Tread Gauge
    NA 1660 mm
    Width of Tires
    2050 mm 2066 mm
    Articulation, left or right
    20° NA
    Minimum Ground Clearence
    NA NA

    Popular Comparisons with Fine FMG 585HD

    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Mahindra Grader G100 Price
    Mahindra CE Mahindra Roadmaster G100
    4.5 rating
    ₹ 51 lakh onwards*
    9010 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Mahindra G80 Grader
    Mahindra CE Mahindra Roadmaster G80
    4.5 rating
    ₹ 29.5 lakh onwards*
    7738 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Mahindra Grader G90 Price in India
    Mahindra CE Mahindra Roadmaster G90
    4.5 rating
    ₹ 44 lakh onwards*
    8596 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    BEML 605 Grader
    BEML BEML BG605I
    4.5 rating
    ₹ 70-85 Lakhs
    11500 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Mahindra Grader G9595 Price in India
    Mahindra CE Mahindra G9595
    4.5 rating
    ₹ 57-59 Lakhs
    9400 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    BEML 405 Motor Grader
    BEML BEML BG405A
    4.5 rating
    ₹ 45-55 Lakhs
    11500 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Mahindra Grader G75 Price in India
    Mahindra CE Mahindra G75 Smart
    4.5 rating
    ₹ 34-36 Lakhs
    7160 kg
    Compare
    VS
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Mahindra Grader G90 Price in India
    Mahindra CE Mahindra G9075
    4.5 rating
    ₹ 35-38 Lakhs
    8848 kg
    Compare

    Popular Comparisons with Fine FMG 130

    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Mahindra Grader G100 Price
    Mahindra CE Mahindra Roadmaster G100
    4.5 rating
    ₹ 51 lakh onwards*
    9010 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Mahindra G80 Grader
    Mahindra CE Mahindra Roadmaster G80
    4.5 rating
    ₹ 29.5 lakh onwards*
    7738 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Mahindra Grader G90 Price in India
    Mahindra CE Mahindra Roadmaster G90
    4.5 rating
    ₹ 44 lakh onwards*
    8596 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Fine 585 Motor Grader Price in India
    Fine Equipments Fine FMG 585HD
    4.5 rating
    ₹ 40-50 Lakhs
    9495 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    BEML 605 Grader
    BEML BEML BG605I
    4.5 rating
    ₹ 70-85 Lakhs
    11500 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Mahindra Grader G9595 Price in India
    Mahindra CE Mahindra G9595
    4.5 rating
    ₹ 57-59 Lakhs
    9400 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    BEML 405 Motor Grader
    BEML BEML BG405A
    4.5 rating
    ₹ 45-55 Lakhs
    11500 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Mahindra Grader G75 Price in India
    Mahindra CE Mahindra G75 Smart
    4.5 rating
    ₹ 34-36 Lakhs
    7160 kg
    Compare
    VS
    Fine 130 Motor Grader
    Fine Equipments Fine FMG 130
    4.5 rating
    ₹ 30-45 Lakhs
    9100 kg
    Mahindra Grader G90 Price in India
    Mahindra CE Mahindra G9075
    4.5 rating
    ₹ 35-38 Lakhs
    8848 kg
    Compare

    Frequently Asked Question

    Ans.

    The Fine FMG 130 is faster and clears a wider cut. It runs at a higher speed and has a longer blade, so long, wide road jobs finish sooner. The FMG 585HD is built more for strong pull than speed. For long roads, the FMG 130 saves time each day.

    Ans.

    The Fine FMG 585HD is better for hard ground and tough pulling. It gives strong pull at low engine speed and has a good hydraulic pump, so it works steadily through hard soil. The FMG 130 is quicker but pulls less at low speed. For tough sites, the FMG 585HD holds up.

    Ans.

    The Fine FMG 130 comes with an AC cabin and GPS as standard. So the driver stays cool and grades to the right level without paying extra. On the FMG 585HD the AC cabin is optional. If you want comfort and tech built in, the FMG 130 gives more for the money.

    Ans.

    Yes, parts and service are easy for both. Fine is an Indian brand, so parts are close and cost less, and local mechanics know these machines. This means fewer idle days. Both also sell to small firms later because they are simple and affordable.

    Ans.

    Yes. Banks, finance companies, and Fine dealers give loans for both. Your monthly amount depends on your down payment and your record. Ask two or three lenders and compare first. As Indian machines, both are easy on the budget for small contractors.

    Fine FMG 585HD Vs Fine FMG 130 - Compare Price & Availability Across 600+ Locations in India

    Compare Fine FMG 585HD Vs Fine FMG 130 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare