Fine FMG 585HD vs Mahindra G9075: the two differ on 66 of 79 listed specs. The main differences are Engine (Ashok Leyland 130 HP vs Mahindra 74 HP), Price (₹ 40-50 Lakhs vs ₹ 35-38 Lakhs), Max Torque (480 Nm @ 1500 rpm vs 345 Nm @ 1200-1500 RPM), Weight (9495 kg vs 8848 kg). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Fine FMG 585HD
Mahindra G9075
Fine FMG 585HD
VS
Mahindra G9075
Motor Grader
Fine FMG 585HD vs Mahindra G9075: the two differ on 66 of 79 listed specs. The main differences are Engine (Ashok Leyland 130 HP vs Mahindra 74 HP), Price (₹ 40-50 Lakhs vs ₹ 35-38 Lakhs), Max Torque (480 Nm @ 1500 rpm vs 345 Nm @ 1200-1500 RPM), Weight (9495 kg vs 8848 kg). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
Fine FMG 585HD
₹ 40-50 Lakhs
Mahindra G9075
₹ 35-38 Lakhs
Particulars
Fine FMG 585HD
Mahindra G9075
Fine FMG 585HD vs Mahindra G9075: Which One to Buy?
The Fine FMG 585HD runs a stronger 130 HP engine and a longer blade, so it pushes through tougher, heavier grading work. The Mahindra G9075 is lighter and quicker on the road, with GPS built in and higher ground clearance for rough terrain. If raw pushing power and blade width matter most, the Fine wins. If you want built-in tracking and easier travel over rough ground, the Mahindra fits better.
Contractors doing heavy highway or large earthworks jobs, where blade width and grading power matter most, will get more from the Fine range. Municipal buyers and rural road crews who value GPS tracking and better ground clearance for uneven terrain may prefer the Mahindra lineup. Check the full motor grader range and read the motor grader buying guide to match blade size and speed to the roads you actually work on.
Fine FMG 585HD
Pros:
Delivers high torque and fuel efficiency
Stable with precise control
Offers comfort and reliability for construction tasks
Equipped with a powerful Ashok Leyland 130 HP engine
Longer blade length of 3050 mm
Higher maximum forward and reverse speed of 20 km/hr and 19 km/hr, respectively
Better minimum turning radius of 9000 mm
Cons:
Lower engine power compared to Mahindra G9075
Optional AC Cabin
No specified GPS system
High gross vehicle weight might limit maneuverability in some conditions
Mahindra G9075
Pros:
Exceptional fuel economy and versatile performance for urban and rural applications
Integrated GPS system as a standard feature
Higher ground clearance of 467 mm improves capability on rough terrain
Higher engine displacement of 3.532 L
Higher max forward speed of 36.5 km/hr
Cons:
Lower engine power at 74 HP
Shorter blade length of 2600 mm, which may limit the grading width
No available option for an AC cabin
Less pump flow capacity with 108 L/min
Pros:
Cons:
Closing Recommendation
Think about what your project needs most. If you need raw power and a wider blade for tougher grading jobs, the Fine FMG 585HD is the stronger choice. If you want good fuel economy and GPS tracking built in from the start, the Mahindra G9075 works better. So match the machine to your work: Fine FMG 585HD for heavy-duty grading jobs, Mahindra G9075 for fuel-conscious work with built-in tracking.
Fine FMG 585HD Vs Mahindra G9075 Motor Grader Price, Technical Specifications & Features
The Fine Equipments FMG 585HD is a compact grader machine in India designed for road construction and land development projects. It suits contractors working on small to medium infrastructure and grading projects. Powered by a 130 HP Ashok Leyland diesel engine, it delivers strong torque at low RPM for heavy-duty tasks. The fuel-efficient engine helps lower operating costs during long hours. Its 3.05-meter moldboard promotes better grading productivity with fewer passes. The load-sensing hydraulic system allows for precise blade control and quicker response. Power-shift transmission ensures smooth operation and better control on tight job sites. Articulation and steering enhance maneuverability in confined areas. The operator cabin is designed for comfort, visibility, and easy controls to boost productivity. The Fine FMG 585HD motor grader price in India is expected to range from ₹40 to ₹50 lakh. This machine from Fine Construction Equipment is a great investment for buyers wanting efficient, durable, and cost-effective grading machines.
Mahindra RoadMaster G9075 motor grader ensures exceptional fuel economy and performance, making this Mahindra motor grader ideal for both urban and rural grading applications.
Fine FMG 585HD vs Mahindra G9075: Which One to Buy?
The Fine FMG 585HD runs a stronger 130 HP engine and a longer blade, so it pushes through tougher, heavier grading work. The Mahindra G9075 is lighter and quicker on the road, with GPS built in and higher ground clearance for rough terrain. If raw pushing power and blade width matter most, the Fine wins. If you want built-in tracking and easier travel over rough ground, the Mahindra fits better.
Contractors doing heavy highway or large earthworks jobs, where blade width and grading power matter most, will get more from the Fine range. Municipal buyers and rural road crews who value GPS tracking and better ground clearance for uneven terrain may prefer the Mahindra lineup. Check the full motor grader range and read the motor grader buying guide to match blade size and speed to the roads you actually work on.
Fine FMG 585HD
Pros:
Delivers high torque and fuel efficiency
Stable with precise control
Offers comfort and reliability for construction tasks
Equipped with a powerful Ashok Leyland 130 HP engine
Longer blade length of 3050 mm
Higher maximum forward and reverse speed of 20 km/hr and 19 km/hr, respectively
Better minimum turning radius of 9000 mm
Cons:
Lower engine power compared to Mahindra G9075
Optional AC Cabin
No specified GPS system
High gross vehicle weight might limit maneuverability in some conditions
Mahindra G9075
Pros:
Exceptional fuel economy and versatile performance for urban and rural applications
Integrated GPS system as a standard feature
Higher ground clearance of 467 mm improves capability on rough terrain
Higher engine displacement of 3.532 L
Higher max forward speed of 36.5 km/hr
Cons:
Lower engine power at 74 HP
Shorter blade length of 2600 mm, which may limit the grading width
No available option for an AC cabin
Less pump flow capacity with 108 L/min
Pros:
Cons:
Closing Recommendation
Think about what your project needs most. If you need raw power and a wider blade for tougher grading jobs, the Fine FMG 585HD is the stronger choice. If you want good fuel economy and GPS tracking built in from the start, the Mahindra G9075 works better. So match the machine to your work: Fine FMG 585HD for heavy-duty grading jobs, Mahindra G9075 for fuel-conscious work with built-in tracking.
Fine FMG 585HD Vs Mahindra G9075 Motor Grader Price, Technical Specifications & Features
The Fine Equipments FMG 585HD is a compact grader machine in India designed for road construction and land development projects. It suits contractors working on small to medium infrastructure and grading projects. Powered by a 130 HP Ashok Leyland diesel engine, it delivers strong torque at low RPM for heavy-duty tasks. The fuel-efficient engine helps lower operating costs during long hours. Its 3.05-meter moldboard promotes better grading productivity with fewer passes. The load-sensing hydraulic system allows for precise blade control and quicker response. Power-shift transmission ensures smooth operation and better control on tight job sites. Articulation and steering enhance maneuverability in confined areas. The operator cabin is designed for comfort, visibility, and easy controls to boost productivity. The Fine FMG 585HD motor grader price in India is expected to range from ₹40 to ₹50 lakh. This machine from Fine Construction Equipment is a great investment for buyers wanting efficient, durable, and cost-effective grading machines.
Mahindra RoadMaster G9075 motor grader ensures exceptional fuel economy and performance, making this Mahindra motor grader ideal for both urban and rural grading applications.
66 differ · 13 identical
Key highlights: Fine FMG 585HD vs Mahindra G9075 Motor Grader
Fine FMG 585HD
Mahindra G9075
Engine Make
Ashok Leyland
Mahindra BS TREM IV CEV
Max Torque
480 Nm @ 1500 rpm
345 Nm @ 1200-1500 RPM
Fuel Tank
140 L
100 L
Hydraulic System
150 L
50 L
Tires
11 x 20"
13 x 24-12 PR
Frame Height
NA
NA
Max Lift Above Ground
460 mm
395 mm
Max Cutting Depth
NA
300 mm
Blade Pitch Angle
40° forward; 3° backward
40° forward; 5° backward
Wheel Base
5300 mm
5225 mm
Overall Length
9100 mm
8594 mm
Overall Height
3550 mm
3290 mm
Warranty
1 Yr. / 1000 hr.
1 Year
AC Cabin
Optional
Not Available
GPS
NA
Standard
Key highlights: Fine FMG 585HD vs Mahindra G9075 Motor Grader
Fine FMG 585HD
Mahindra G9075
Engine Make
Ashok Leyland
Mahindra BS TREM IV CEV
Max Torque
480 Nm @ 1500 rpm
345 Nm @ 1200-1500 RPM
Fuel Tank
140 L
100 L
Hydraulic System
150 L
50 L
Tires
11 x 20"
13 x 24-12 PR
Frame Height
NA
NA
Max Lift Above Ground
460 mm
395 mm
Max Cutting Depth
NA
300 mm
Blade Pitch Angle
40° forward; 3° backward
40° forward; 5° backward
Wheel Base
5300 mm
5225 mm
Overall Length
9100 mm
8594 mm
Overall Height
3550 mm
3290 mm
Warranty
1 Yr. / 1000 hr.
1 Year
AC Cabin
Optional
Not Available
GPS
NA
Standard
Full specifications: Fine FMG 585HD vs Mahindra G9075 Motor Grader
Engine
Fine FMG 585HD
Mahindra G9075
Model
Ashok Leyland 130 HP
Mahindra 74 HP
Fuel
Diesel
Diesel
Type
Four Stroke; Turbocharged; Charge Air Cooled; Electronic Common Rail Direct Injection
Water Cooled; Turbo Charged
Gross Power
130 HP (97 kW) @ 2200 rpm
74 HP (55 kW) @ 2200 RPM
Number Of Cylinders
4 in-line
4
Max Torque
480 Nm @ 1500 rpm
345 Nm @ 1200-1500 RPM
Displacement
3.84 L
3.532 L
Battery
12V / 180Ah
12V; 100 Ah
Alternator
12V / 90A
12V / 90 A
Transmission
Fine FMG 585HD
Mahindra G9075
Type
Power-Shift Transmission
Carraro 4WD Transmission
Speed
Fine FMG 585HD
Mahindra G9075
Max. Forward Speed
20 km/hr
36.5 km/hr
Max. Reverse Speed
19 km/hr
10.5 km/hr
Axles
Fine FMG 585HD
Mahindra G9075
Rear Axle
Heavy-duty tandem axle with central planetary reduction with no spin differential lock. Tandem Axle with hydraulic service brake and SAHR parking brake.
Driven; Non Steerable; Central Pivoted
Front Axle
Fully welded steel structure for torsional strength.
Non-driven; Streerable Central Pivoted
Tyres
Fine FMG 585HD
Mahindra G9075
Size
11 x 20"
13 x 24-12 PR
Steering
Fine FMG 585HD
Mahindra G9075
Type
Hydraulic power steering
Power Steering
Minimum Turning Radius
9000 mm
10000 mm
Steering-Angle
45°
45°
Brakes
Fine FMG 585HD
Mahindra G9075
Service
Foot pedal operated hydraulic brake through master cylinder.
Foot operated hydraulically actuated oil immersed disc in the middle axle.
Parking
Spring Applied; Hydraulic Release Type parking brake operated through solenoid.
Hand operated; mechanically actuated caliper brakes on the middle axle.
Frame
Fine FMG 585HD
Mahindra G9075
Front Frame Height
NA
NA
Front Frame Width
NA
NA
Front Frame Thickness
NA
NA
MoldBoard
Fine FMG 585HD
Mahindra G9075
Type
NA
NA
Blade Length
3050 mm
2600 mm
Blade Height
494 mm
516 mm
Blade Thickness
NA
16 mm
Cutting Edge
NA
152 x 16
Blade Pull
NA
NA
Blade Down Pressure
NA
NA
Moldboard Side Shift (Right/Left)
914 mm
513 mm
Maximum Shoulder Reach (Right/Left)
744 mm
489.5 mm
Maximum Lift Above Ground
460 mm
395 mm
Maximum Cutting Depth
NA
300 mm
Blade Pitch Angle
40° forward; 3° backward
40° forward; 5° backward
Hydraulics
Fine FMG 585HD
Mahindra G9075
Type
Closer Centre -Variable flow; load sensing axial piston pump with load-independent post-compensated valve with over-centre valve on all functions.
Open Center - Fixed Displacement Tandem Gear Pump
Maximum Pump Flow
118 L/min
108 L/min
Maximum System Pressure
22.0 MPa
20 MPa
Service Capacities
Fine FMG 585HD
Mahindra G9075
Fuel Tank
140 L
100 L
Cooling System
18 L
17 L
Engine Oil
10 L
13.5 L
DEF Tank
NA
NA
Trasnsmission Oil
35 L
16 L
Final Drive
NA
NA
Hydraulic System
150 L
50 L
Circle Reverse Housing
5 L
NA
Weight
Fine FMG 585HD
Mahindra G9075
Gross Vehicle Weight
9495 kg
8848 kg
Moldboard Base
2100 mm
1691 mm
Wheelbase
5300 mm
5225 mm
Tandem Wheelbase
1300 mm
1850 mm
Width of Standard Moldboard
3050 mm
2600 mm
Overall Length
9100 mm
8594 mm
Tread Gauge
NA
NA
Width of Tires
2050 mm
NA
Articulation, left or right
20°
NA
Minimum Ground Clearence
NA
467 mm
Full specifications: Fine FMG 585HD vs Mahindra G9075 Motor Grader
Engine
Fine FMG 585HD
Mahindra G9075
Model
Ashok Leyland 130 HP
Mahindra 74 HP
Fuel
Diesel
Diesel
Type
Four Stroke; Turbocharged; Charge Air Cooled; Electronic Common Rail Direct Injection
Water Cooled; Turbo Charged
Gross Power
130 HP (97 kW) @ 2200 rpm
74 HP (55 kW) @ 2200 RPM
Number Of Cylinders
4 in-line
4
Max Torque
480 Nm @ 1500 rpm
345 Nm @ 1200-1500 RPM
Displacement
3.84 L
3.532 L
Battery
12V / 180Ah
12V; 100 Ah
Alternator
12V / 90A
12V / 90 A
Speed
Fine FMG 585HD
Mahindra G9075
Max. Forward Speed
20 km/hr
36.5 km/hr
Max. Reverse Speed
19 km/hr
10.5 km/hr
Axles
Fine FMG 585HD
Mahindra G9075
Rear Axle
Heavy-duty tandem axle with central planetary reduction with no spin differential lock. Tandem Axle with hydraulic service brake and SAHR parking brake.
Driven; Non Steerable; Central Pivoted
Front Axle
Fully welded steel structure for torsional strength.
Non-driven; Streerable Central Pivoted
Tyres
Fine FMG 585HD
Mahindra G9075
Size
11 x 20"
13 x 24-12 PR
Steering
Fine FMG 585HD
Mahindra G9075
Type
Hydraulic power steering
Power Steering
Minimum Turning Radius
9000 mm
10000 mm
Steering-Angle
45°
45°
Brakes
Fine FMG 585HD
Mahindra G9075
Service
Foot pedal operated hydraulic brake through master cylinder.
Foot operated hydraulically actuated oil immersed disc in the middle axle.
Parking
Spring Applied; Hydraulic Release Type parking brake operated through solenoid.
Hand operated; mechanically actuated caliper brakes on the middle axle.
Frame
Fine FMG 585HD
Mahindra G9075
Front Frame Height
NA
NA
Front Frame Width
NA
NA
Front Frame Thickness
NA
NA
Moldboard
Fine FMG 585HD
Mahindra G9075
Type
NA
NA
Blade Length
3050 mm
2600 mm
Blade Height
494 mm
516 mm
Blade Thickness
NA
16 mm
Cutting Edge
NA
152 x 16
Blade Pull
NA
NA
Blade Down Pressure
NA
NA
Moldboard Side Shift (Right/Left)
914 mm
513 mm
Maximum Shoulder Reach (Right/Left)
744 mm
489.5 mm
Maximum Lift Above Ground
460 mm
395 mm
Maximum Cutting Depth
NA
300 mm
Blade Pitch Angle
40° forward; 3° backward
40° forward; 5° backward
Hydraulics
Fine FMG 585HD
Mahindra G9075
Type
Closer Centre -Variable flow; load sensing axial piston pump with load-independent post-compensated valve with over-centre valve on all functions.
Questions buyers ask about the Fine FMG 585HD vs Mahindra G9075
Ans.
The Fine FMG 585HD has more engine power, at 130 HP against the Mahindra's 74 HP. This makes the Fine a better fit for pushing heavier material or grading harder ground.
Ans.
Yes, the Mahindra G9075 comes with GPS built in as standard, which helps if you want to track the machine's location and hours without adding extra parts. The Fine FMG 585HD does not include a GPS system.
Ans.
The Fine FMG 585HD has the longer blade at 3050 mm, compared to the Mahindra's 2600 mm. A longer blade covers more ground in each pass, which helps on wider roads.
Ans.
No, the Mahindra G9075 does not offer an AC cabin at all, even as an option. The Fine FMG 585HD at least offers an AC cabin as an extra, so check with your dealer if cabin comfort matters to you.
Ans.
The Mahindra G9075 has a higher top speed of 36.5 km/hr, quicker than the Fine FMG 585HD. This can help if you move the machine often between sites on public roads.
Fine FMG 585HD Vs Mahindra G9075 - Compare Price & Availability Across 600+ Locations in India
Compare Fine FMG 585HD Vs Mahindra G9075 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
