Suno Sabki, Chuno Apni.
Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    Komatsu GD955-7 VS Komatsu GD825A-2 Motor Grader

    Komatsu GD955-7
    Price Available Soon*

    Komatsu GD955-7

    • Engine

      Komatsu 426 HP

    • Blade

      5489 mm

    • Weight

      47320 kg

    • Turning Radius

      9300 mm

    • Max Forward Speed

      43.6 km/hr

    • Max Reverse Speed

      30.0 km/hr
    Large (>50 Ton)
    Komatsu GD825A-2
    Price Available Soon*

    Komatsu GD825A-2

    • Engine

      Komatsu 280 HP

    • Blade

      4878 mm

    • Weight

      26350 kg

    • Turning Radius

      7900 mm

    • Max Forward Speed

      44.9 km/hr

    • Max Reverse Speed

      3.9 km/hr
    Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Komatsu GD955-7Komatsu GD825A-2
    Komatsu GD955-7 VS Komatsu GD825A-2 Motor Grader
    Komatsu 955 Motor Grader Price
    Komatsu GD955-7

    Price Available Soon

    Komatsu 825 Motor Grader Price in India
    Komatsu GD825A-2

    Price Available Soon

    Particulars Komatsu GD955-7 Komatsu GD825A-2

    Komatsu GD825A-2 vs GD955-7: Which One Should You Buy?

    Both are Komatsu motor graders, so parts and service feel familiar if you already run one Komatsu machine. The Komatsu GD825A-2 is the smaller and lighter grader of the two. It turns in a tighter circle, so it works well on narrow village roads and smaller sites. The Komatsu GD955-7 is the bigger machine. It has a longer blade, a stronger engine, and comes with an AC cabin and GPS as standard.

    For a small contractor working on local roads and repair jobs, the GD825A-2 is easier to move and turn around. For a big road-building company or EPC firm doing long highway stretches, the GD955-7 covers more ground in each pass and keeps the driver comfortable with AC on long shifts. See the full range of motor graders or read our motor grader buying guide.

    Komatsu GD955-7

    Pros:

    • More powerful engine with 426 HP
    • Longer blade length for broader coverage
    • Higher blade down pressure and pull
    • Larger fuel and hydraulic system capacities
    • AC cabin comes standard
    • GPS system comes standard
    • Greater maximum lift above ground

    Cons:

    • Larger minimum turning radius
    • Heavier machine with more ground pressure

    Komatsu GD825A-2

    Pros:

    • Smaller minimum turning radius for better maneuverability
    • Lighter machine which could mean less ground impact
    • Maximum reverse speed is very low, indicating potential granularity in speed control

    Cons:

    • Less powerful engine with 280 HP
    • Shorter blade length compared to GD955-7
    • AC cabin and GPS not standard
    • Smaller fuel and hydraulic system capacities

    Pros:

    Cons:

    Closing Recommendation

    Both graders come from the same Komatsu family, so parts and service support feel familiar either way. Choose the Komatsu GD955-7 when your projects are large, need more engine power, and your driver will benefit from a standard AC cabin on long shifts. Choose the Komatsu GD825A-2 when your sites are smaller or tighter, and easy turning and lighter weight matter more than raw power. So match the machine to your work: Komatsu GD955-7 for big road projects needing power and comfort, Komatsu GD825A-2 for smaller, tighter sites needing easy handling.

    Komatsu GD955-7 Vs Komatsu GD825A-2 Motor Grader Price, Technical Specifications & Features

    Brand L&T Komatsu Motor grader L&T Komatsu Motor grader
    Type Large (>50 Ton) Large (>50 Ton)
    Price Price Available Soon Price Available Soon
    Engine Komatsu 426 HP Komatsu 280 HP
    Weight 47320 kg 26350 kg
    Min. Turning Radius 9300 mm 7900 mm
    Max. Forward Speed 43.6 km/hr 44.9 km/hr
    Max. Reverse Speed 30.0 km/hr 3.9 km/hr
    Quick Overview:

    Known for its cutting-edge technology, the Komatsu GD955-7 motor grader combines durability and efficiency. This grader machine is built for large-scale grading tasks in challenging conditions.

    The Komatsu GD825A-2 motor grader is a flagship model in India for haul road maintenance and heavy-duty applications. Built for contractors managing mining, quarry, and large infrastructure operations, this grader machine delivers exceptional performance in tough environments. It features a 298 HP engine that provides powerful output for continuous heavy-load operations. A 4.88-meter moldboard ensures maximum coverage and high-volume productivity, requiring fewer passes and faster grading in mining conditions. The hydroshift transmission supports efficient power delivery with better control under load. The CLSS hydraulic system allows for precise blade control with multi-function efficiency. The robust structure maintains stability and durability in extreme terrains. This machine from Komatsu Construction Equipment is the ultimate choice for buyers seeking ultra heavy-duty, mining-grade, high-capacity road construction equipment.

    Komatsu GD825A-2 vs GD955-7: Which One Should You Buy?

    Both are Komatsu motor graders, so parts and service feel familiar if you already run one Komatsu machine. The Komatsu GD825A-2 is the smaller and lighter grader of the two. It turns in a tighter circle, so it works well on narrow village roads and smaller sites. The Komatsu GD955-7 is the bigger machine. It has a longer blade, a stronger engine, and comes with an AC cabin and GPS as standard.

    For a small contractor working on local roads and repair jobs, the GD825A-2 is easier to move and turn around. For a big road-building company or EPC firm doing long highway stretches, the GD955-7 covers more ground in each pass and keeps the driver comfortable with AC on long shifts. See the full range of motor graders or read our motor grader buying guide.

    Komatsu GD955-7

    Pros:

    • More powerful engine with 426 HP
    • Longer blade length for broader coverage
    • Higher blade down pressure and pull
    • Larger fuel and hydraulic system capacities
    • AC cabin comes standard
    • GPS system comes standard
    • Greater maximum lift above ground

    Cons:

    • Larger minimum turning radius
    • Heavier machine with more ground pressure

    Komatsu GD825A-2

    Pros:

    • Smaller minimum turning radius for better maneuverability
    • Lighter machine which could mean less ground impact
    • Maximum reverse speed is very low, indicating potential granularity in speed control

    Cons:

    • Less powerful engine with 280 HP
    • Shorter blade length compared to GD955-7
    • AC cabin and GPS not standard
    • Smaller fuel and hydraulic system capacities

    Pros:

    Cons:

    Closing Recommendation

    Both graders come from the same Komatsu family, so parts and service support feel familiar either way. Choose the Komatsu GD955-7 when your projects are large, need more engine power, and your driver will benefit from a standard AC cabin on long shifts. Choose the Komatsu GD825A-2 when your sites are smaller or tighter, and easy turning and lighter weight matter more than raw power. So match the machine to your work: Komatsu GD955-7 for big road projects needing power and comfort, Komatsu GD825A-2 for smaller, tighter sites needing easy handling.

    Komatsu GD955-7 Vs Komatsu GD825A-2 Motor Grader Price, Technical Specifications & Features

    Komatsu GD955-7 Komatsu GD825A-2
    Brand
    L&T Komatsu Motor grader L&T Komatsu Motor grader
    Type
    Large (>50 Ton) Large (>50 Ton)
    Price
    Price Available Soon Price Available Soon
    Engine
    Komatsu 426 HP Komatsu 280 HP
    Weight
    47320 kg 26350 kg
    Min. Turning Radius
    9300 mm 7900 mm
    Max. Forward Speed
    43.6 km/hr 44.9 km/hr
    Max. Reverse Speed
    30.0 km/hr 3.9 km/hr
    Quick Overview:

    Known for its cutting-edge technology, the Komatsu GD955-7 motor grader combines durability and efficiency. This grader machine is built for large-scale grading tasks in challenging conditions.

    The Komatsu GD825A-2 motor grader is a flagship model in India for haul road maintenance and heavy-duty applications. Built for contractors managing mining, quarry, and large infrastructure operations, this grader machine delivers exceptional performance in tough environments. It features a 298 HP engine that provides powerful output for continuous heavy-load operations. A 4.88-meter moldboard ensures maximum coverage and high-volume productivity, requiring fewer passes and faster grading in mining conditions. The hydroshift transmission supports efficient power delivery with better control under load. The CLSS hydraulic system allows for precise blade control with multi-function efficiency. The robust structure maintains stability and durability in extreme terrains. This machine from Komatsu Construction Equipment is the ultimate choice for buyers seeking ultra heavy-duty, mining-grade, high-capacity road construction equipment.

    Komatsu GD955-7 Vs Komatsu GD825A-2 Motor Grader Key Highlights

    Komatsu GD955-7 Komatsu GD825A-2
    Engine Make Komatsu SAA6D140E-7 Komatsu S6D140E
    Max Torque 2150 Nm @ 1350 rpm NA
    Fuel Tank 717 L 500 L
    Hydraulic System 147 L 80 L
    Tires 26.5R25 L3 tires 23.5-25-12 PR (L3) rock type tires
    Frame Height 504 mm 400 mm
    Max Lift Above Ground 542 mm 420 mm
    Max Cutting Depth 498 mm 680 mm
    Blade Pitch Angle 53° forward; 3° backward 49° forward; 5° backward
    Wheel Base 8330 mm 7100 mm
    Overall Length 13200 mm 11470 mm
    Overall Height 3990 mm 3550 mm
    Warranty 1 Yr. / 3000 hr. 1 Yr. / 3000 hr.
    AC Cabin Standard Optional
    GPS Standard Not Available

    Komatsu GD955-7 Vs Komatsu GD825A-2 Motor Grader Key Highlights

    Komatsu GD955-7 Komatsu GD825A-2
    Engine Make
    Komatsu SAA6D140E-7 Komatsu S6D140E
    Max Torque
    2150 Nm @ 1350 rpm NA
    Fuel Tank
    717 L 500 L
    Hydraulic System
    147 L 80 L
    Tires
    26.5R25 L3 tires 23.5-25-12 PR (L3) rock type tires
    Frame Height
    504 mm 400 mm
    Max Lift Above Ground
    542 mm 420 mm
    Max Cutting Depth
    498 mm 680 mm
    Blade Pitch Angle
    53° forward; 3° backward 49° forward; 5° backward
    Wheel Base
    8330 mm 7100 mm
    Overall Length
    13200 mm 11470 mm
    Overall Height
    3990 mm 3550 mm
    Warranty
    1 Yr. / 3000 hr. 1 Yr. / 3000 hr.
    AC Cabin
    Standard Optional
    GPS
    Standard Not Available

    Komatsu GD955-7 Vs Komatsu GD825A-2 Motor Grader Specifications

    Engine

    Komatsu GD955-7 Komatsu GD825A-2
    Model Komatsu 426 HP Komatsu 280 HP
    Fuel Diesel Diesel
    Type Tier IV; Water-cooled; 4-cycle; direct injection; Turbocharged and air to air aftercooled Water-cooled; 4-cycle; Overhead-value; Turbocharged
    Gross Power 426 HP (318 kW) @ 1900 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders 6 6
    Max Torque 2150 Nm @ 1350 rpm NA
    Displacement 15.24 L 15.24 L
    Battery 2 x 12 V 2 x 12V / 200 Ah
    Alternator 24 V / 140 A 24V / 50A

    Transmission

    Komatsu GD955-7 Komatsu GD825A-2
    Type Full power shift transmission with torque converter and lockup. The Komatsu HYDROSHIFT transmission consists of planetary gears and hydraulically actuated and force- lubricated multiple-disc clutches; assuring light-touch; effort-minimizing shifting.

    Speed

    Komatsu GD955-7 Komatsu GD825A-2
    Max. Forward Speed 43.6 km/hr 44.9 km/hr
    Max. Reverse Speed 30.0 km/hr 3.9 km/hr

    Axles

    Komatsu GD955-7 Komatsu GD825A-2
    Rear Axle Alloy steel; heat treated; semi floating axle with lock / unlock differential (Auto / manual) Full-floating rear axle is made of forged heat treated steel.
    Front Axle Solid bar construction welded steel sections Reserve Elliot-type front axle with a center ground clearance of 680 mm and oscillation angle of 32° (total) assures stable machine travel. Hydraulic front wheel learning (18° to each side)

    Tyres

    Komatsu GD955-7 Komatsu GD825A-2
    Size 26.5R25 L3 tires 23.5-25-12 PR (L3) rock type tires

    Steering

    Komatsu GD955-7 Komatsu GD825A-2
    Type Hydraulic power steering providing stopped engine steering meeting ISO 5010. Full-hydraulic orbit-roll type steering control with two steering Cylinders are directly actuated on the knucle arm.
    Minimum Turning Radius 9300 mm 7900 mm
    Steering-Angle 50° 50°

    Brakes

    Komatsu GD955-7 Komatsu GD825A-2
    Service Foot operated; wet multiple-disc brakes; hydraulically actuated on four tandem wheels. Food-operated; wet; multiple disc brakes are air-actuated on rear wheels and sealed for adjustments-free operation. Two; crossed brake lines for sure braking.
    Parking Manually actuated; spring applied on four tandem wheels. Hydraulically released wet disc. Mechanical; dry; disc type actuated on transmission output shaft. Spring-applied and air-released.

    Frame

    Komatsu GD955-7 Komatsu GD825A-2
    Front Frame Height 504 mm 400 mm
    Front Frame Width 470 mm 350 mm
    Front Frame Thickness 25 / 32 mm NA

    MoldBoard

    Komatsu GD955-7 Komatsu GD825A-2
    Type Hydraulic power shift fabricated from steel. Includes replaceable metal wear inserts; cutting edge and end bits. Cutting edge and end bits are hardened. Box-section constructed with wear-resistant steel. Hydraulic blade sideshift and tip control. Side edges are attached.
    Blade Length 5489 mm 4878 mm
    Blade Height 960 mm 850 mm
    Blade Thickness 25 mm 25 mm
    Cutting Edge 254 x 25 mm 254 x 25 mm
    Blade Pull 26816 kgf NA
    Blade Down Pressure 22230 kgf NA
    Moldboard Side Shift (Right/Left) 818 mm / 916 mm NA
    Maximum Shoulder Reach (Right/Left) 2126 mm / 2119 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground 542 mm 420 mm
    Maximum Cutting Depth 498 mm 680 mm
    Blade Pitch Angle 53° forward; 3° backward 49° forward; 5° backward

    Hydraulics

    Komatsu GD955-7 Komatsu GD825A-2
    Type Load-sensing closed center hydraulics with variable displacement piston pump. One variable-capacity piston pump powers the work equipment and steering system.
    Maximum Pump Flow 315.2 L/min 278 L/min
    Maximum System Pressure 27.5 MPa 25.0 MPa

    Service Capacities

    Komatsu GD955-7 Komatsu GD825A-2
    Fuel Tank 717 L 500 L
    Cooling System 80 L 58 L
    Engine Oil 50 L 38 L
    DEF Tank 36 L NA
    Trasnsmission Oil 85 L 25 L
    Final Drive 56 L 63 L
    Hydraulic System 147 L 80 L
    Circle Reverse Housing 27.5 L NA

    Weight

    Komatsu GD955-7 Komatsu GD825A-2
    Gross Vehicle Weight 47320 kg 26350 kg
    Moldboard Base 3160 mm 3100 mm
    Wheelbase 8330 mm 7100 mm
    Tandem Wheelbase 1980 mm 1840 mm
    Width of Standard Moldboard 5490 mm 4878 mm
    Overall Length 13200 mm 11470 mm
    Tread Gauge 3005 mm 3310 mm
    Width of Tires 3685 mm 2620 mm
    Articulation, left or right 27° 25°
    Minimum Ground Clearence 710 mm 440 mm

    Komatsu GD955-7 Vs Komatsu GD825A-2 Motor Grader Specifications

    Engine

    Komatsu GD955-7 Komatsu GD825A-2
    Model
    Komatsu 426 HP Komatsu 280 HP
    Fuel
    Diesel Diesel
    Type
    Tier IV; Water-cooled; 4-cycle; direct injection; Turbocharged and air to air aftercooled Water-cooled; 4-cycle; Overhead-value; Turbocharged
    Gross Power
    426 HP (318 kW) @ 1900 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders
    6 6
    Max Torque
    2150 Nm @ 1350 rpm NA
    Displacement
    15.24 L 15.24 L
    Battery
    2 x 12 V 2 x 12V / 200 Ah
    Alternator
    24 V / 140 A 24V / 50A

    Speed

    Komatsu GD955-7 Komatsu GD825A-2
    Max. Forward Speed
    43.6 km/hr 44.9 km/hr
    Max. Reverse Speed
    30.0 km/hr 3.9 km/hr

    Axles

    Komatsu GD955-7 Komatsu GD825A-2
    Rear Axle
    Alloy steel; heat treated; semi floating axle with lock / unlock differential (Auto / manual) Full-floating rear axle is made of forged heat treated steel.
    Front Axle
    Solid bar construction welded steel sections Reserve Elliot-type front axle with a center ground clearance of 680 mm and oscillation angle of 32° (total) assures stable machine travel. Hydraulic front wheel learning (18° to each side)

    Tyres

    Komatsu GD955-7 Komatsu GD825A-2
    Size
    26.5R25 L3 tires 23.5-25-12 PR (L3) rock type tires

    Steering

    Komatsu GD955-7 Komatsu GD825A-2
    Type
    Hydraulic power steering providing stopped engine steering meeting ISO 5010. Full-hydraulic orbit-roll type steering control with two steering Cylinders are directly actuated on the knucle arm.
    Minimum Turning Radius
    9300 mm 7900 mm
    Steering-Angle
    50° 50°

    Brakes

    Komatsu GD955-7 Komatsu GD825A-2
    Service
    Foot operated; wet multiple-disc brakes; hydraulically actuated on four tandem wheels. Food-operated; wet; multiple disc brakes are air-actuated on rear wheels and sealed for adjustments-free operation. Two; crossed brake lines for sure braking.
    Parking
    Manually actuated; spring applied on four tandem wheels. Hydraulically released wet disc. Mechanical; dry; disc type actuated on transmission output shaft. Spring-applied and air-released.

    Frame

    Komatsu GD955-7 Komatsu GD825A-2
    Front Frame Height
    504 mm 400 mm
    Front Frame Width
    470 mm 350 mm
    Front Frame Thickness
    25 / 32 mm NA

    Moldboard

    Komatsu GD955-7 Komatsu GD825A-2
    Type
    Hydraulic power shift fabricated from steel. Includes replaceable metal wear inserts; cutting edge and end bits. Cutting edge and end bits are hardened. Box-section constructed with wear-resistant steel. Hydraulic blade sideshift and tip control. Side edges are attached.
    Blade Length
    5489 mm 4878 mm
    Blade Height
    960 mm 850 mm
    Blade Thickness
    25 mm 25 mm
    Cutting Edge
    254 x 25 mm 254 x 25 mm
    Blade Pull
    26816 kgf NA
    Blade Down Pressure
    22230 kgf NA
    Moldboard Side Shift (Right/Left)
    818 mm / 916 mm NA
    Maximum Shoulder Reach (Right/Left)
    2126 mm / 2119 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground
    542 mm 420 mm
    Maximum Cutting Depth
    498 mm 680 mm
    Blade Pitch Angle
    53° forward; 3° backward 49° forward; 5° backward

    Hydraulics

    Komatsu GD955-7 Komatsu GD825A-2
    Type
    Load-sensing closed center hydraulics with variable displacement piston pump. One variable-capacity piston pump powers the work equipment and steering system.
    Maximum Pump Flow
    315.2 L/min 278 L/min
    Maximum System Pressure
    27.5 MPa 25.0 MPa

    Service Capacities

    Komatsu GD955-7 Komatsu GD825A-2
    Fuel Tank
    717 L 500 L
    Cooling System
    80 L 58 L
    Engine Oil
    50 L 38 L
    DEF Tank
    36 L NA
    Trasnsmission Oil
    85 L 25 L
    Final Drive
    56 L 63 L
    Hydraulic System
    147 L 80 L
    Circle Reverse Housing
    27.5 L NA

    Weight

    Komatsu GD955-7 Komatsu GD825A-2
    Gross Vehicle Weight
    47320 kg 26350 kg
    Moldboard Base
    3160 mm 3100 mm
    Wheelbase
    8330 mm 7100 mm
    Tandem Wheelbase
    1980 mm 1840 mm
    Width of Standard Moldboard
    5490 mm 4878 mm
    Overall Length
    13200 mm 11470 mm
    Tread Gauge
    3005 mm 3310 mm
    Width of Tires
    3685 mm 2620 mm
    Articulation, left or right
    27° 25°
    Minimum Ground Clearence
    710 mm 440 mm

    Popular Comparisons with Komatsu GD955-7

    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Popular Comparisons with Komatsu GD825A-2

    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare

    Frequently Asked Question

    Ans.

    Yes. Since both the GD825A-2 and GD955-7 are Komatsu machines, dealers who stock parts for one model often stock common wear parts for the other too. This makes ownership simpler if a Komatsu dealer is close to your site.

    Ans.

    The GD825A-2 suits small, local road jobs best. It is lighter and turns in a tighter circle, so it works well in narrow lanes and smaller sites where a bigger machine struggles to move.

    Ans.

    The GD825A-2 is easier to move between job sites. It is the lighter of the two machines, which can mean simpler transport permits and lower loading costs on a trailer.

    Ans.

    Yes, most likely. The GD955-7 has a larger fuel tank and a more powerful engine, so it will use more diesel per hour. But it also covers more ground in each pass on big projects, which can balance out the extra fuel cost.

    Ans.

    Yes, with a short familiarisation. The controls work in a similar way across Komatsu graders, so a driver used to one size can learn the other quickly, though the bigger GD955-7 needs more care in tight spaces.

    Komatsu GD955-7 Vs Komatsu GD825A-2 - Compare Price & Availability Across 600+ Locations in India

    Compare Komatsu GD955-7 Vs Komatsu GD825A-2 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare