Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    Komatsu GD955-7 VS BEML BG825 Motor Grader

    Komatsu GD955-7
    Price Available Soon*

    Komatsu GD955-7

    • Engine

      Komatsu 426 HP

    • Blade

      5489 mm

    • Weight

      47320 kg

    • Turning Radius

      9300 mm

    • Max Forward Speed

      43.6 km/hr

    • Max Reverse Speed

      30.0 km/hr
    Large (>50 Ton)
    BEML BG825
    ₹ 1.5-1.8 Crores*

    BEML BG825

    • Engine

      BEML 280 HP

    • Blade

      4928 mm

    • Weight

      25750 kg

    • Turning Radius

      7900 mm

    • Max Forward Speed

      44.9 km/hr

    • Max Reverse Speed

      47.9 km/hr
    Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Komatsu GD955-7BEML BG825
    Komatsu GD955-7 VS BEML BG825 Motor Grader
    Komatsu 955 Motor Grader Price
    Komatsu GD955-7

    Price Available Soon

    BG825 Motor Grader
    BEML BG825

    ₹ 1.5-1.8 Crores

    Particulars Komatsu GD955-7 BEML BG825

    BEML BG825 vs Komatsu GD955-7: Which Motor Grader to Buy?

    These two graders are not built for the same size of job, so it helps to know where each one fits. The BEML BG825 is quicker to move and turns in a smaller space, which makes it easier to handle on tighter sites and shorter stretches of road. The Komatsu GD955-7 is a much bigger, more powerful machine with a longer blade and a large fuel tank, built for long, heavy grading runs on major road projects.

    If your work is smaller sites, town roads, or jobs where turning space is tight, the BEML fits better and keeps running cost down. If you are grading long highway stretches with a heavy daily target, the Komatsu's extra power and blade length get more done per day, though it costs more to run and move between sites. See the full BEML grader range, the Komatsu grader range, all motor graders, or our motor grader buying guide.

    Komatsu GD955-7

    Pros:

    • Higher gross power of 426 HP for demanding tasks
    • Longer blade length of 5489 mm for more efficient grading
    • Advanced engine model with Tier IV technology for reduced emissions
    • Larger fuel tank capacity of 717 liters for extended operation time
    • Higher blade down pressure and pull for tough grading applications
    • Equipped with GPS and AC cabin as standard for operator comfort
    • Robust front and rear axle design for durability

    Cons:

    • Heavier gross vehicle weight may lead to higher transportation costs
    • Longer overall length might be less maneuverable in confined spaces

    BEML BG825

    Pros:

    • Faster forward and reverse speed, maximizing operational efficiency
    • Smaller turning radius of 7900 mm for better maneuverability
    • Lower gross vehicle weight may translate to lower operational costs
    • Reverse Elliot-type front axle and heat-treated steel rear axle for strength
    • Rock-type tubeless tyres suitable for rough terrain
    • Blade pitch angle allows for a greater range of motion

    Cons:

    • Lower engine power of 280 HP may be less suitable for the heaviest tasks
    • Lacks in-built GPS and AC cabin, which could affect operator comfort and productivity
    • Shorter moldboard length might reduce grading efficiency in some scenarios

    Pros:

    Cons:

    Closing Recommendation

    These two graders serve different kinds of work, so pick by the size of your project. The BEML BG825 suits smaller sites, tighter turns, and lower daily running cost. The Komatsu GD955-7 suits large road projects that need a longer blade, more raw power, and standard GPS and AC comfort for long shifts. So match the machine to your work: BEML BG825 for smaller, tighter jobs, Komatsu GD955-7 for big, heavy road-building projects.

    Komatsu GD955-7 Vs BEML BG825 Motor Grader Price, Technical Specifications & Features

    Brand L&T Komatsu Motor grader BEML Motor grader
    Type Large (>50 Ton) Large (>50 Ton)
    Price Price Available Soon ₹ 1.5-1.8 Crores
    Engine Komatsu 426 HP BEML 280 HP
    Weight 47320 kg 25750 kg
    Min. Turning Radius 9300 mm 7900 mm
    Max. Forward Speed 43.6 km/hr 44.9 km/hr
    Max. Reverse Speed 30.0 km/hr 47.9 km/hr
    Quick Overview:

    Known for its cutting-edge technology, the Komatsu GD955-7 motor grader combines durability and efficiency. This grader machine is built for large-scale grading tasks in challenging conditions.

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    BEML BG825 vs Komatsu GD955-7: Which Motor Grader to Buy?

    These two graders are not built for the same size of job, so it helps to know where each one fits. The BEML BG825 is quicker to move and turns in a smaller space, which makes it easier to handle on tighter sites and shorter stretches of road. The Komatsu GD955-7 is a much bigger, more powerful machine with a longer blade and a large fuel tank, built for long, heavy grading runs on major road projects.

    If your work is smaller sites, town roads, or jobs where turning space is tight, the BEML fits better and keeps running cost down. If you are grading long highway stretches with a heavy daily target, the Komatsu's extra power and blade length get more done per day, though it costs more to run and move between sites. See the full BEML grader range, the Komatsu grader range, all motor graders, or our motor grader buying guide.

    Komatsu GD955-7

    Pros:

    • Higher gross power of 426 HP for demanding tasks
    • Longer blade length of 5489 mm for more efficient grading
    • Advanced engine model with Tier IV technology for reduced emissions
    • Larger fuel tank capacity of 717 liters for extended operation time
    • Higher blade down pressure and pull for tough grading applications
    • Equipped with GPS and AC cabin as standard for operator comfort
    • Robust front and rear axle design for durability

    Cons:

    • Heavier gross vehicle weight may lead to higher transportation costs
    • Longer overall length might be less maneuverable in confined spaces

    BEML BG825

    Pros:

    • Faster forward and reverse speed, maximizing operational efficiency
    • Smaller turning radius of 7900 mm for better maneuverability
    • Lower gross vehicle weight may translate to lower operational costs
    • Reverse Elliot-type front axle and heat-treated steel rear axle for strength
    • Rock-type tubeless tyres suitable for rough terrain
    • Blade pitch angle allows for a greater range of motion

    Cons:

    • Lower engine power of 280 HP may be less suitable for the heaviest tasks
    • Lacks in-built GPS and AC cabin, which could affect operator comfort and productivity
    • Shorter moldboard length might reduce grading efficiency in some scenarios

    Pros:

    Cons:

    Closing Recommendation

    These two graders serve different kinds of work, so pick by the size of your project. The BEML BG825 suits smaller sites, tighter turns, and lower daily running cost. The Komatsu GD955-7 suits large road projects that need a longer blade, more raw power, and standard GPS and AC comfort for long shifts. So match the machine to your work: BEML BG825 for smaller, tighter jobs, Komatsu GD955-7 for big, heavy road-building projects.

    Komatsu GD955-7 Vs BEML BG825 Motor Grader Price, Technical Specifications & Features

    Komatsu GD955-7 BEML BG825
    Brand
    L&T Komatsu Motor grader BEML Motor grader
    Type
    Large (>50 Ton) Large (>50 Ton)
    Price
    Price Available Soon ₹ 1.5-1.8 Crores
    Engine
    Komatsu 426 HP BEML 280 HP
    Weight
    47320 kg 25750 kg
    Min. Turning Radius
    9300 mm 7900 mm
    Max. Forward Speed
    43.6 km/hr 44.9 km/hr
    Max. Reverse Speed
    30.0 km/hr 47.9 km/hr
    Quick Overview:

    Known for its cutting-edge technology, the Komatsu GD955-7 motor grader combines durability and efficiency. This grader machine is built for large-scale grading tasks in challenging conditions.

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    Komatsu GD955-7 Vs BEML BG825 Motor Grader Key Highlights

    Komatsu GD955-7 BEML BG825
    Engine Make Komatsu SAA6D140E-7 BEML BS6140
    Max Torque 2150 Nm @ 1350 rpm NA
    Fuel Tank 717 L 500 L
    Hydraulic System 147 L 105 L
    Tires 26.5R25 L3 tires 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres
    Frame Height 504 mm 400 mm
    Max Lift Above Ground 542 mm 490 mm
    Max Cutting Depth 498 mm 680 mm
    Blade Pitch Angle 53° forward; 3° backward 49° forward; 5° backward
    Wheel Base 8330 mm 7100 mm
    Overall Length 13200 mm 11470 mm
    Overall Height 3990 mm 3750 mm
    Warranty 1 Yr. / 3000 hr. 1 Yr. / 2500 hr.
    AC Cabin Standard Not Available
    GPS Standard Not Available

    Komatsu GD955-7 Vs BEML BG825 Motor Grader Key Highlights

    Komatsu GD955-7 BEML BG825
    Engine Make
    Komatsu SAA6D140E-7 BEML BS6140
    Max Torque
    2150 Nm @ 1350 rpm NA
    Fuel Tank
    717 L 500 L
    Hydraulic System
    147 L 105 L
    Tires
    26.5R25 L3 tires 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres
    Frame Height
    504 mm 400 mm
    Max Lift Above Ground
    542 mm 490 mm
    Max Cutting Depth
    498 mm 680 mm
    Blade Pitch Angle
    53° forward; 3° backward 49° forward; 5° backward
    Wheel Base
    8330 mm 7100 mm
    Overall Length
    13200 mm 11470 mm
    Overall Height
    3990 mm 3750 mm
    Warranty
    1 Yr. / 3000 hr. 1 Yr. / 2500 hr.
    AC Cabin
    Standard Not Available
    GPS
    Standard Not Available

    Komatsu GD955-7 Vs BEML BG825 Motor Grader Specifications

    Engine

    Komatsu GD955-7 BEML BG825
    Model Komatsu 426 HP BEML 280 HP
    Fuel Diesel Diesel
    Type Tier IV; Water-cooled; 4-cycle; direct injection; Turbocharged and air to air aftercooled 4 stroke; water-cooled
    Gross Power 426 HP (318 kW) @ 1900 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders 6 6 inline
    Max Torque 2150 Nm @ 1350 rpm NA
    Displacement 15.24 L 15.24 L
    Battery 2 x 12 V 2 x 12 V / 200 Ah maintenance free batteries
    Alternator 24 V / 140 A 24V / 45A

    Transmission

    Komatsu GD955-7 BEML BG825
    Type Full power shift transmission with torque converter and lockup. BEML - Hydro Shift Transmission

    Speed

    Komatsu GD955-7 BEML BG825
    Max. Forward Speed 43.6 km/hr 44.9 km/hr
    Max. Reverse Speed 30.0 km/hr 47.9 km/hr

    Axles

    Komatsu GD955-7 BEML BG825
    Rear Axle Alloy steel; heat treated; semi floating axle with lock / unlock differential (Auto / manual) Full-flotaing rear is made of forged heat treated steel
    Front Axle Solid bar construction welded steel sections Reverse Elliot-type

    Tyres

    Komatsu GD955-7 BEML BG825
    Size 26.5R25 L3 tires 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres

    Steering

    Komatsu GD955-7 BEML BG825
    Type Hydraulic power steering providing stopped engine steering meeting ISO 5010. Orbitrol; full hydraulic steering system
    Minimum Turning Radius 9300 mm 7900 mm
    Steering-Angle 50° 50°

    Brakes

    Komatsu GD955-7 BEML BG825
    Service Foot operated; wet multiple-disc brakes; hydraulically actuated on four tandem wheels. Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking.
    Parking Manually actuated; spring applied on four tandem wheels. Hydraulically released wet disc. Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested.

    Frame

    Komatsu GD955-7 BEML BG825
    Front Frame Height 504 mm 400 mm
    Front Frame Width 470 mm 350 mm
    Front Frame Thickness 25 / 32 mm NA

    MoldBoard

    Komatsu GD955-7 BEML BG825
    Type Hydraulic power shift fabricated from steel. Includes replaceable metal wear inserts; cutting edge and end bits. Cutting edge and end bits are hardened. Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached.
    Blade Length 5489 mm 4928 mm
    Blade Height 960 mm 800 mm
    Blade Thickness 25 mm 25 mm
    Cutting Edge 254 x 25 mm 203 x 19 mm
    Blade Pull 26816 kgf NA
    Blade Down Pressure 22230 kgf NA
    Moldboard Side Shift (Right/Left) 818 mm / 916 mm NA
    Maximum Shoulder Reach (Right/Left) 2126 mm / 2119 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground 542 mm 490 mm
    Maximum Cutting Depth 498 mm 680 mm
    Blade Pitch Angle 53° forward; 3° backward 49° forward; 5° backward

    Hydraulics

    Komatsu GD955-7 BEML BG825
    Type Load-sensing closed center hydraulics with variable displacement piston pump. Three gear pump (tandem) type
    Maximum Pump Flow 315.2 L/min 268 L/min
    Maximum System Pressure 27.5 MPa 20.6 MPa

    Service Capacities

    Komatsu GD955-7 BEML BG825
    Fuel Tank 717 L 500 L
    Cooling System 80 L 58 L
    Engine Oil 50 L 38 L
    DEF Tank 36 L NA
    Trasnsmission Oil 85 L 25 L
    Final Drive 56 L 34 L
    Hydraulic System 147 L 105 L
    Circle Reverse Housing 27.5 L NA

    Weight

    Komatsu GD955-7 BEML BG825
    Gross Vehicle Weight 47320 kg 25750 kg
    Moldboard Base 3160 mm 3100 mm
    Wheelbase 8330 mm 7100 mm
    Tandem Wheelbase 1980 mm 1840 mm
    Width of Standard Moldboard 5490 mm 4928 mm
    Overall Length 13200 mm 11470 mm
    Tread Gauge 3005 mm 2460 mm
    Width of Tires 3685 mm 3050 mm
    Articulation, left or right 27° 25°
    Minimum Ground Clearence 710 mm 680 mm

    Komatsu GD955-7 Vs BEML BG825 Motor Grader Specifications

    Engine

    Komatsu GD955-7 BEML BG825
    Model
    Komatsu 426 HP BEML 280 HP
    Fuel
    Diesel Diesel
    Type
    Tier IV; Water-cooled; 4-cycle; direct injection; Turbocharged and air to air aftercooled 4 stroke; water-cooled
    Gross Power
    426 HP (318 kW) @ 1900 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders
    6 6 inline
    Max Torque
    2150 Nm @ 1350 rpm NA
    Displacement
    15.24 L 15.24 L
    Battery
    2 x 12 V 2 x 12 V / 200 Ah maintenance free batteries
    Alternator
    24 V / 140 A 24V / 45A

    Speed

    Komatsu GD955-7 BEML BG825
    Max. Forward Speed
    43.6 km/hr 44.9 km/hr
    Max. Reverse Speed
    30.0 km/hr 47.9 km/hr

    Axles

    Komatsu GD955-7 BEML BG825
    Rear Axle
    Alloy steel; heat treated; semi floating axle with lock / unlock differential (Auto / manual) Full-flotaing rear is made of forged heat treated steel
    Front Axle
    Solid bar construction welded steel sections Reverse Elliot-type

    Tyres

    Komatsu GD955-7 BEML BG825
    Size
    26.5R25 L3 tires 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres

    Steering

    Komatsu GD955-7 BEML BG825
    Type
    Hydraulic power steering providing stopped engine steering meeting ISO 5010. Orbitrol; full hydraulic steering system
    Minimum Turning Radius
    9300 mm 7900 mm
    Steering-Angle
    50° 50°

    Brakes

    Komatsu GD955-7 BEML BG825
    Service
    Foot operated; wet multiple-disc brakes; hydraulically actuated on four tandem wheels. Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking.
    Parking
    Manually actuated; spring applied on four tandem wheels. Hydraulically released wet disc. Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested.

    Frame

    Komatsu GD955-7 BEML BG825
    Front Frame Height
    504 mm 400 mm
    Front Frame Width
    470 mm 350 mm
    Front Frame Thickness
    25 / 32 mm NA

    Moldboard

    Komatsu GD955-7 BEML BG825
    Type
    Hydraulic power shift fabricated from steel. Includes replaceable metal wear inserts; cutting edge and end bits. Cutting edge and end bits are hardened. Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached.
    Blade Length
    5489 mm 4928 mm
    Blade Height
    960 mm 800 mm
    Blade Thickness
    25 mm 25 mm
    Cutting Edge
    254 x 25 mm 203 x 19 mm
    Blade Pull
    26816 kgf NA
    Blade Down Pressure
    22230 kgf NA
    Moldboard Side Shift (Right/Left)
    818 mm / 916 mm NA
    Maximum Shoulder Reach (Right/Left)
    2126 mm / 2119 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground
    542 mm 490 mm
    Maximum Cutting Depth
    498 mm 680 mm
    Blade Pitch Angle
    53° forward; 3° backward 49° forward; 5° backward

    Hydraulics

    Komatsu GD955-7 BEML BG825
    Type
    Load-sensing closed center hydraulics with variable displacement piston pump. Three gear pump (tandem) type
    Maximum Pump Flow
    315.2 L/min 268 L/min
    Maximum System Pressure
    27.5 MPa 20.6 MPa

    Service Capacities

    Komatsu GD955-7 BEML BG825
    Fuel Tank
    717 L 500 L
    Cooling System
    80 L 58 L
    Engine Oil
    50 L 38 L
    DEF Tank
    36 L NA
    Trasnsmission Oil
    85 L 25 L
    Final Drive
    56 L 34 L
    Hydraulic System
    147 L 105 L
    Circle Reverse Housing
    27.5 L NA

    Weight

    Komatsu GD955-7 BEML BG825
    Gross Vehicle Weight
    47320 kg 25750 kg
    Moldboard Base
    3160 mm 3100 mm
    Wheelbase
    8330 mm 7100 mm
    Tandem Wheelbase
    1980 mm 1840 mm
    Width of Standard Moldboard
    5490 mm 4928 mm
    Overall Length
    13200 mm 11470 mm
    Tread Gauge
    3005 mm 2460 mm
    Width of Tires
    3685 mm 3050 mm
    Articulation, left or right
    27° 25°
    Minimum Ground Clearence
    710 mm 680 mm

    Popular Comparisons with Komatsu GD955-7

    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Popular Comparisons with BEML BG825

    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 24 Grader Price
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 955 Motor Grader Price
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 755 Motor Grader Price in India
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 825 Motor Grader Price in India
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Frequently Asked Question

    Ans.

    No, they are quite different in size. The Komatsu GD955-7 is a much bigger, more powerful grader built for large road projects. The BEML BG825 is a smaller, more nimble machine that suits shorter jobs and tighter sites.

    Ans.

    The BEML BG825 turns in a smaller space than the Komatsu GD955-7. This helps a lot on narrow roads, town streets, or sites where you cannot swing a long machine around easily.

    Ans.

    The Komatsu GD955-7 covers more road per pass. It has a much longer blade than the BEML BG825, so on big, wide highway jobs, it clears more ground in fewer passes.

    Ans.

    The BEML BG825 is cheaper to run day to day. It is a lighter machine with lower fuel needs, which helps keep running cost down on smaller jobs. The Komatsu GD955-7 costs more to run but does far more heavy work per shift.

    Ans.

    The Komatsu GD955-7 comes with GPS and an AC cabin fitted as standard, which helps on long shifts on big projects. The BEML BG825 does not include these as standard, so ask your dealer about adding them if you need them.

    Komatsu GD955-7 Vs BEML BG825 - Compare Price & Availability Across 600+ Locations in India

    Compare Komatsu GD955-7 Vs BEML BG825 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare