Popular Products
Popular Comparisons
Contact Us



    Your Captcha*

    captcha

    Contact Info
    Chat with us

    Liebherr R 9100 G6 VS Liebherr R 9150 G7 Excavator

    Liebherr R 9100 G6
    Price Available Soon*

    Liebherr R 9100 G6

    • Weight

      122464 Kg

    • Bucket

      7.5 m³

    • Dig. Depth

      7150 mm

    • Engine

      Liebherr 757 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      7600 mm
    Extra-Large (>50 Ton)
    Liebherr R 9150 G7
    Price Available Soon*

    Liebherr R 9150 G7

    • Weight

      129700 Kg

    • Bucket

      8.8 - 9.6 m³

    • Dig. Depth

      8100 mm

    • Engine

      Liebherr 757 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      7800 mm
    Extra-Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Liebherr R 9100 G6Liebherr R 9150 G7
    Liebherr R 9100 G6 VS Liebherr R 9150 G7 Excavator
    Liebherr R 9100 G6 Mining Excavator in India
    Liebherr R 9100 G6

    Price Available Soon

    Liebherr R 9150 G7 Mining Excavator Price in India
    Liebherr R 9150 G7

    Price Available Soon

    Particulars Liebherr R 9100 G6 Liebherr R 9150 G7

    Liebherr R 9100 G6 vs Liebherr R 9150 G7: Which One Should You Buy?

    Both of these are very big mining excavators. The spec tables below give you all the numbers. The real question is which size is right for your site. The Liebherr R 9100 G6 is a little lighter and has a smaller bucket. It is a good match if your trucks are medium size and your site is not the biggest. The Liebherr R 9150 G7 is heavier and has a bigger bucket. It loads more rock in each pass. It suits very large mines where you run big trucks and need to move more material every day. Both use the same engine, so power is not the main difference. The bucket size and machine weight are what change your daily output.

    Before you buy, think about a few simple things. How big are your dump trucks, and how many passes will each excavator need to fill them? Is Liebherr service and parts support near your site? Can your work keep a machine this size busy every day? You can read our excavator applications guide to match the machine to your job, or see the full excavator range.

    Liebherr R 9100 G6

    Pros:

    • Designed for the toughest mining environments
    • 757 HP Liebherr engine for exceptional power
    • Standard equipped with AC Cabin and GPS
    • Operating weight suitable for a range of applications
    • Bucket capacity of 7.5 m³ tailored to large excavation tasks

    Cons:

    • Less bucket capacity compared to the R 9150 G7
    • Lower operating weight might limit performance in the heaviest tasks
    • Travel speed is slightly higher, but may not be significant for all operations

    Liebherr R 9150 G7

    Pros:

    • Greater bucket capacity ranging from 8.8 to 9.6 m³
    • Engineered for heavy-duty performance in large-scale operations
    • Higher bucket digging force at 620 kN for tougher excavating
    • Larger operating weight accommodates heavy-duty tasks
    • Additional alternator specification for improved electrical support

    Cons:

    • Slightly slower travel speed-high at 2.9 Km/h
    • Higher ground bearing pressure indicates more surface pressure during operation
    • Requires more fuel with a larger tank capacity, potentially higher operating costs

    Pros:

    Cons:

    Closing Recommendation

    Let your daily work decide. Pick the Liebherr R 9150 G7 when you run big trucks in a very large mine and need to move more rock in each pass, since it is heavier with a bigger bucket. Pick the Liebherr R 9100 G6 when your trucks are medium size and you want a machine that fits many kinds of jobs. For a machine this big, also check that Liebherr service, spare parts, and trained drivers are near your site, so it can stay busy every day. So match the machine to your work: Liebherr R 9100 G6 for mixed, medium-size jobs, Liebherr R 9150 G7 for heavy, high-volume mining.

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 Excavator Price, Technical Specifications & Features

    Brand Liebherr Excavator Liebherr Excavator
    Type Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Operating Cost Price Available Soon Price Available Soon
    Price Price Available Soon Price Available Soon
    Weight 122464 Kg 129700 Kg
    Bucket 7.5 m³ 8.8 - 9.6 m³
    Max Digging Depth 7150 mm 8100 mm
    Engine Liebherr 757 HP Liebherr 757 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 7600 mm 7800 mm
    Quick Overview:

    Compact for a mining excavator, the Liebherr R 9100 G6 is the class many operations start with before moving to bigger iron. Its Liebherr D9512 engine is rated 757 HP, the bucket holds 7.5 m³, and digging depth is 7150 mm with a dump height of 8650 mm and 560 kN of force at the bucket.

    It works well in limestone, bauxite and smaller coal pits where haul trucks are modest and availability matters more than headline size. The single-maker driveline simplifies support, GPS and an AC cabin come standard, and travel speed tops out at 3.5 Km/h for repositioning along the bench.

    Mid-size by mining standards, the Liebherr R 9150 G7 weighs in at 129700-133100 kg with bucket options of 8.8-9.6 m³. A Liebherr D9512 engine rated 757 HP does the work, generating 620 kN of bucket digging force and dumping at up to 8840 mm.

    That output suits captive mines, large limestone operations and contract mining fleets stepping up from big construction excavators. Liebherr building its own engine keeps the driveline single-source, the cab is air conditioned as standard, and a 1984 L fuel tank covers full-shift running without a midday fuel bowser visit.
    Agency review

    Planning to buy the Liebherr R 9100 G6 Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Liebherr R 9150 G7 Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Liebherr R 9100 G6 vs Liebherr R 9150 G7: Which One Should You Buy?

    Both of these are very big mining excavators. The spec tables below give you all the numbers. The real question is which size is right for your site. The Liebherr R 9100 G6 is a little lighter and has a smaller bucket. It is a good match if your trucks are medium size and your site is not the biggest. The Liebherr R 9150 G7 is heavier and has a bigger bucket. It loads more rock in each pass. It suits very large mines where you run big trucks and need to move more material every day. Both use the same engine, so power is not the main difference. The bucket size and machine weight are what change your daily output.

    Before you buy, think about a few simple things. How big are your dump trucks, and how many passes will each excavator need to fill them? Is Liebherr service and parts support near your site? Can your work keep a machine this size busy every day? You can read our excavator applications guide to match the machine to your job, or see the full excavator range.

    Liebherr R 9100 G6

    Pros:

    • Designed for the toughest mining environments
    • 757 HP Liebherr engine for exceptional power
    • Standard equipped with AC Cabin and GPS
    • Operating weight suitable for a range of applications
    • Bucket capacity of 7.5 m³ tailored to large excavation tasks

    Cons:

    • Less bucket capacity compared to the R 9150 G7
    • Lower operating weight might limit performance in the heaviest tasks
    • Travel speed is slightly higher, but may not be significant for all operations

    Liebherr R 9150 G7

    Pros:

    • Greater bucket capacity ranging from 8.8 to 9.6 m³
    • Engineered for heavy-duty performance in large-scale operations
    • Higher bucket digging force at 620 kN for tougher excavating
    • Larger operating weight accommodates heavy-duty tasks
    • Additional alternator specification for improved electrical support

    Cons:

    • Slightly slower travel speed-high at 2.9 Km/h
    • Higher ground bearing pressure indicates more surface pressure during operation
    • Requires more fuel with a larger tank capacity, potentially higher operating costs

    Pros:

    Cons:

    Closing Recommendation

    Let your daily work decide. Pick the Liebherr R 9150 G7 when you run big trucks in a very large mine and need to move more rock in each pass, since it is heavier with a bigger bucket. Pick the Liebherr R 9100 G6 when your trucks are medium size and you want a machine that fits many kinds of jobs. For a machine this big, also check that Liebherr service, spare parts, and trained drivers are near your site, so it can stay busy every day. So match the machine to your work: Liebherr R 9100 G6 for mixed, medium-size jobs, Liebherr R 9150 G7 for heavy, high-volume mining.

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 Excavator Price, Technical Specifications & Features

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Brand
    Liebherr Excavator Liebherr Excavator
    Type
    Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Price
    Price Available Soon Price Available Soon
    Weight
    122464 Kg 129700 Kg
    Bucket
    7.5 m³ 8.8 - 9.6 m³
    Max Digging Depth
    7150 mm 8100 mm
    Engine
    Liebherr 757 HP Liebherr 757 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    7600 mm 7800 mm
    Quick Overview:

    Compact for a mining excavator, the Liebherr R 9100 G6 is the class many operations start with before moving to bigger iron. Its Liebherr D9512 engine is rated 757 HP, the bucket holds 7.5 m³, and digging depth is 7150 mm with a dump height of 8650 mm and 560 kN of force at the bucket.

    It works well in limestone, bauxite and smaller coal pits where haul trucks are modest and availability matters more than headline size. The single-maker driveline simplifies support, GPS and an AC cabin come standard, and travel speed tops out at 3.5 Km/h for repositioning along the bench.

    Mid-size by mining standards, the Liebherr R 9150 G7 weighs in at 129700-133100 kg with bucket options of 8.8-9.6 m³. A Liebherr D9512 engine rated 757 HP does the work, generating 620 kN of bucket digging force and dumping at up to 8840 mm.

    That output suits captive mines, large limestone operations and contract mining fleets stepping up from big construction excavators. Liebherr building its own engine keeps the driveline single-source, the cab is air conditioned as standard, and a 1984 L fuel tank covers full-shift running without a midday fuel bowser visit.

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 Excavator Key Highlights

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Engine Make Liebherr D9512 Liebherr D9512
    Fuel Tank 1478 L 1984 L
    Engine Displacment 24.24 L 24.24 L
    Under Carriage 6107 mm 6610 mm
    Hydraulic System 1500 L 1631 L
    Arm 3200 mm 3400 mm
    Max Digging Reach NA NA
    Fuel Consumption NA NA
    Overall Width 5856 mm 6105 mm
    Overall Length 14560 mm 14550 mm
    Bucket Digging Force 560 kN 620 kN
    Tailswing Radius NA NA
    Track Shoe Width 600 mm 500 mm
    AC Cabin Standard Standard
    GPS Standard Standard

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 Excavator Key Highlights

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Engine Make
    Liebherr D9512 Liebherr D9512
    Fuel Tank
    1478 L 1984 L
    Engine Displacment
    24.24 L 24.24 L
    Under Carriage
    6107 mm 6610 mm
    Hydraulic System
    1500 L 1631 L
    Arm
    3200 mm 3400 mm
    Max Digging Reach
    NA NA
    Fuel Consumption
    NA NA
    Overall Width
    5856 mm 6105 mm
    Overall Length
    14560 mm 14550 mm
    Bucket Digging Force
    560 kN 620 kN
    Tailswing Radius
    NA NA
    Track Shoe Width
    600 mm 500 mm
    AC Cabin
    Standard Standard
    GPS
    Standard Standard

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 Excavator Specifications

    Engine

    3716 3717
    Model Liebherr 757 HP Liebherr 757 HP
    Fuel Diesel Diesel
    Type 4-stroke diesel common-rail direct injection turbo-charged , hydrostatic fan drive , V12 cylinder engine , water-cooled 4-stroke diesel common-rail direct injection turbo-charged , hydrostatic fan drive , V12 cylinder engine , water-cooled
    Rated Engine Power 757 HP (565 kW) @1800 rpm 757 HP (565 kW) @1800 rpm
    Maximum Torque NA NA
    Piston Displacement 24.24 L 24.24 L
    Alternator 24 V / 140 A 24 V / 140 A , 24 V / 160 A
    Battery 4 x 75 Ah / 12 V 4 x 75 Ah / 12 V
    Starting Motor 24 V - 8.4 kW 24 V - 8.4 kW

    Undercarriage

    24 V - 8.4 kW 24 V - 8.4 kW
    No of Top rollers 2 2
    No of bottom rollers 8 9
    Track Shoes (Each Side) NA NA
    Track Guard NA NA
    Track Shoe width 600 mm 500 mm
    Ground bearing pressure 174.5 kPa 186.3 kPa
    Track Tensioning Grease Grease
    Gradeability NA NA
    Travel Speed-Low NA NA
    Travel Speed-High 3.5 Km/h 2.9 Km/h
    Max Tracking Force NA NA

    Hydraulic System

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Hydraulic pump 3 Liebherr variable flow axial piston pumps 3 Liebherr variable flow axial piston pumps
    Maximum Flow 3 x 435 L/min 3 x 512 L/min
    Pilot Pump NA NA
    Implement Circuit 35.0 MPa 35.0 MPa
    Swing Circuit NA NA
    Travel circuit NA NA
    Pilot circuit NA NA

    Hydraulic Motors

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Travel Liebherr swashplate motors Liebherr swashplate motors
    Swing 2 Liebherr axial piston motors 2 Liebherr axial piston motors

    Service Capacities

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Fuel tank 1478 L 1984 L
    Engine Coolant NA NA
    Engine oil NA NA
    Hydraulic system 1500 L 1631 L
    Hydraulic tank 1000 L 1200 L

    Machine Weight

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Operating Weight 122464 Kg 129700 Kg

    Working Range

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Boom length 7600 mm 7800 mm
    Arm length 3200 mm 3400 mm
    Max Digging Reach NA NA
    Max Digging Reach on ground 13000 mm 13650 mm
    Max digging depth 7150 mm 8100 mm
    Max digging height 12700 mm 13200 mm
    Max Dump Height 8650 mm 8840 mm
    Max vertical wallcut depth NA NA
    Min swing radius NA NA
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 560 kN 620 kN
    Arm Digging Force 415 kN 530 kN
    Swing Speed 6.0 rpm 6.5 rpm

    Dozer Blade

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Bucket Capacity 7.5 m³ 8.8 - 9.6 m³

    Static Dimensions

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Overall Length 14560 mm 14550 mm
    Overall width 5856 mm 6105 mm
    Overall Height 6035 mm 6250 mm
    Overall Height of Cab 4143 mm 4230 mm
    Upper Width 4059 mm 4318 mm
    Track Lengh on Ground 4810 mm 5200 mm
    Undercarriage overall length 6107 mm 6610 mm
    Tailswing radius NA NA
    Min Ground clearance 812 mm 852 mm
    Track gauge 3900 mm 4230 mm
    Width over tracks 4995 mm 5355 mm
    Track Height 1663 mm 1748 mm
    Counterweight Clearance 1803 mm 1840 mm
    Track Shoe Width 600 mm 500 mm

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 Excavator Specifications

    Engine

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Model
    Liebherr 757 HP Liebherr 757 HP
    Fuel
    Diesel Diesel
    Type
    4-stroke diesel common-rail direct injection turbo-charged , hydrostatic fan drive , V12 cylinder engine , water-cooled 4-stroke diesel common-rail direct injection turbo-charged , hydrostatic fan drive , V12 cylinder engine , water-cooled
    Rated Engine Power
    757 HP (565 kW) @1800 rpm 757 HP (565 kW) @1800 rpm
    Maximum Torque
    NA NA
    Piston Displacement
    24.24 L 24.24 L
    Alternator
    24 V / 140 A 24 V / 140 A , 24 V / 160 A
    Battery
    4 x 75 Ah / 12 V 4 x 75 Ah / 12 V
    Starting Motor
    24 V - 8.4 kW 24 V - 8.4 kW

    Undercarriage

    Liebherr R 9100 G6 Liebherr R 9150 G7
    No of Top rollers
    2 2
    No of bottom rollers
    8 9
    Track Shoes (Each Side)
    NA NA
    Track Guard
    NA NA
    Track Shoe width
    600 mm 500 mm
    Ground bearing pressure
    174.5 kPa 186.3 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    NA NA
    Travel Speed-Low
    NA NA
    Travel Speed-High
    3.5 Km/h 2.9 Km/h
    Max Tracking Force
    NA NA

    Hydraulic Motors

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Hydraulic pump
    3 Liebherr variable flow axial piston pumps 3 Liebherr variable flow axial piston pumps
    Maximum Flow
    3 x 435 L/min 3 x 512 L/min
    Pilot Pump
    NA NA
    Implement Circuit
    35.0 MPa 35.0 MPa
    Swing Circuit
    NA NA
    Travel circuit
    NA NA
    Pilot circuit
    NA NA

    Service Capacities

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Fuel tank
    1478 L 1984 L
    Engine Coolant
    NA NA
    Engine oil
    NA NA
    Hydraulic system
    1500 L 1631 L
    Hydraulic tank
    1000 L 1200 L

    Machine Weight

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Operating Weight
    122464 Kg 129700 Kg

    Working Range

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Boom length
    7600 mm 7800 mm
    Arm length
    3200 mm 3400 mm
    Max Digging Reach
    NA NA
    Max Digging Reach on ground
    13000 mm 13650 mm
    Max digging depth
    7150 mm 8100 mm
    Max digging height
    12700 mm 13200 mm
    Max Dump Height
    8650 mm 8840 mm
    Max vertical wallcut depth
    NA NA
    Min swing radius
    NA NA
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    560 kN 620 kN
    Arm Digging Force
    415 kN 530 kN
    Swing Speed
    6.0 rpm 6.5 rpm

    Dozer Blade

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Bucket Capacity
    7.5 m³ 8.8 - 9.6 m³

    Static Dimensions

    Liebherr R 9100 G6 Liebherr R 9150 G7
    Overall Length
    14560 mm 14550 mm
    Overall width
    5856 mm 6105 mm
    Overall Height
    6035 mm 6250 mm
    Overall Height of Cab
    4143 mm 4230 mm
    Upper Width
    4059 mm 4318 mm
    Track Lengh on Ground
    4810 mm 5200 mm
    Undercarriage overall length
    6107 mm 6610 mm
    Tailswing radius
    NA NA
    Min Ground clearance
    812 mm 852 mm
    Track gauge
    3900 mm 4230 mm
    Width over tracks
    4995 mm 5355 mm
    Track Height
    1663 mm 1748 mm
    Counterweight Clearence
    1803 mm 1840 mm
    Track Shoe Width
    600 mm 500 mm

    Popular Comparisons with Liebherr R 9100 G6

    VS
    Liebherr R 9100 G6 Mining Excavator in India
    Liebherr Liebherr R 9100 G6
    4.5 rating
    Price Available Soon
    122464 Kg
    Liebherr R 9150 G7 Mining Excavator Price in India
    Liebherr Liebherr R 9150 G7
    4.5 rating
    Price Available Soon
    129700 Kg
    Compare
    VS
    Liebherr R 9100 G6 Mining Excavator in India
    Liebherr Liebherr R 9100 G6
    4.5 rating
    Price Available Soon
    122464 Kg
    Tata Hitachi EX 1200V Mining Excavator | Desi Machines
    Tata Hitachi Tata Hitachi EX 1200V
    4.5 rating
    Price Available Soon
    109000 Kg
    Compare
    VS
    Liebherr R 9100 G6 Mining Excavator in India
    Liebherr Liebherr R 9100 G6
    4.5 rating
    Price Available Soon
    122464 Kg
    Komatsu PC1250-8R Excavator
    L&T Komatsu Komatsu PC1250-8R
    4.5 rating
    Price Available Soon
    106500 Kg
    Compare

    Popular Comparisons with Liebherr R 9150 G7

    VS
    Liebherr R 9150 G7 Mining Excavator Price in India
    Liebherr Liebherr R 9150 G7
    4.5 rating
    Price Available Soon
    129700 Kg
    Liebherr R 9100 G6 Mining Excavator in India
    Liebherr Liebherr R 9100 G6
    4.5 rating
    Price Available Soon
    122464 Kg
    Compare
    VS
    Liebherr R 9150 G7 Mining Excavator Price in India
    Liebherr Liebherr R 9150 G7
    4.5 rating
    Price Available Soon
    129700 Kg
    Tata Hitachi EX 1200V Mining Excavator | Desi Machines
    Tata Hitachi Tata Hitachi EX 1200V
    4.5 rating
    Price Available Soon
    109000 Kg
    Compare
    VS
    Liebherr R 9150 G7 Mining Excavator Price in India
    Liebherr Liebherr R 9150 G7
    4.5 rating
    Price Available Soon
    129700 Kg
    Komatsu PC1250-8R Excavator
    L&T Komatsu Komatsu PC1250-8R
    4.5 rating
    Price Available Soon
    106500 Kg
    Compare

    Frequently Asked Question

    Ans.

    The Liebherr R 9150 G7 gives more output. It has a bigger bucket, so it lifts more rock in each pass. This means it fills a truck faster and moves more material by the end of the day. The R 9100 G6 also works fast, but its bucket is a little smaller. If your daily target is very high, the R 9150 G7 is the better fit.

    Ans.

    Match the bucket to your truck size. A good rule is three to five passes to fill one truck. The R 9150 G7 has a bigger bucket, so it fills large trucks in fewer passes. The R 9100 G6 suits medium and large trucks well. If the bucket is too big for a small truck, you waste it. If it is too small for a big truck, loading takes too long. Pick the machine that fills your truck in the right number of passes.

    Ans.

    Both machines use the same engine, so fuel use per hour is close. The R 9150 G7 is heavier and moves more material, so it can burn a little more, but it also does more work for that fuel. The real cost to watch is cost per tonne moved, not just fuel per hour. On a very busy large site, the bigger machine can cost less per tonne because it moves more. On a smaller site, the R 9100 G6 can be cheaper to run because you do not pay for size you do not use.

    Ans.

    Yes, both use the same Liebherr mining service network. Parts and trained service people come through the same dealer support, so neither machine is harder to keep running than the other. Before you buy, ask how far the nearest Liebherr support is from your site and how fast they send parts. For a machine this big, quick parts support matters more than a small difference in specs, because one day of downtime is costly.

    Ans.

    Both hold value well because Liebherr mining excavators are known and trusted. The R 9100 G6 may find a buyer a little faster because more sites can use its size. Very large machines like the R 9150 G7 need a buyer who runs a big mine, so the buyer pool is smaller. If selling later is a big worry for you, the R 9100 G6 is the safer choice. Good service records help you sell either machine.

    Ans.

    Yes. Banks, finance companies, and Liebherr dealers all arrange loans and lease plans for mining machines this size. Many large contractors and EPC companies use a lease so they do not pay the full cost at once. What you pay each month depends on your down payment, your loan record, and the plan you choose. Ask two or three lenders and compare before you decide.

    Liebherr R 9100 G6 Vs Liebherr R 9150 G7 - Compare Price & Availability Across 600+ Locations in India

    Compare Liebherr R 9100 G6 Vs Liebherr R 9150 G7 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare