Sany STG170C-10 vs CASE 845B: the two differ on 68 of 79 listed specs. The main differences are Engine (Cummins 173 HP vs FPT 173 HP), Price (₹ 75-90 Lakhs vs ₹ 80-95 Lakhs), Max Torque (880 Nm @ 1300 rpm vs 758 Nm @ 1500 rpm), Weight (17250 kg vs 14605 kg). The other 11 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Sany STG170C-10
CASE 845B
Sany STG170C-10
VS
CASE 845B
Motor Grader
Sany STG170C-10 vs CASE 845B: the two differ on 68 of 79 listed specs. The main differences are Engine (Cummins 173 HP vs FPT 173 HP), Price (₹ 75-90 Lakhs vs ₹ 80-95 Lakhs), Max Torque (880 Nm @ 1300 rpm vs 758 Nm @ 1500 rpm), Weight (17250 kg vs 14605 kg). The other 11 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
Sany STG170C-10
₹ 75-90 Lakhs
CASE 845B
₹ 80-95 Lakhs
Particulars
Sany STG170C-10
CASE 845B
CASE 845B vs Sany STG170C-10: Which One to Buy?
Both these graders put out a similar 173 HP, so the real difference comes down to torque, traction and features rather than raw engine size. The Sany STG170C-10 has more torque, at 880 Nm against the CASE 845B's 758 Nm, plus a no-spin differential and a Jingda rear axle built for better traction, and it comes with AC and GPS as standard. The CASE 845B turns in a tighter circle, at 7250 mm against the Sany's 7300 mm, and uses a load-sensing closed-center hydraulic system for more precise control, along with hydrostatic steering that includes an integrated emergency system.
If torque, traction and standard driver comfort matter most for your grading work, the Sany STG170C-10 is worth comparing. If you want tighter maneuvering in confined spaces and a more advanced hydraulic steering setup, look at the CASE 845B. See the full CASE grader range, the Sany grader range, all motor graders, or read the motor grader buying guide.
Sany STG170C-10
Pros:
Strong engine performance with maximum torque of 880 Nm @ 1300 rpm.
Higher maximum forward speed of 36.0 km/hr allows for quicker operation.
Equipped with a No spin differential system and reliable Jingda rear axle for better traction.
Standard AC Cabin and GPS for operator comfort and improved navigation.
More significant blade down pressure of 8769 kgf for effective grading.
Cons:
Higher price range compared to CASE 845B.
Turning radius is marginally larger at 7300 mm, which could affect maneuverability in tight spaces.
CASE 845B
Pros:
More affordable with a price range of ₹ 1.29-1.31 Crore.
Slightly higher max. forward speed of 41.5 km/hr for faster operation.
Smaller minimum turning radius of 7250 mm for better maneuverability.
Comes with a load-sensing closed center hydraulic system for precise control.
Hydrostatic steering with an integrated emergency system.
Cons:
Lower maximum torque compared to Sany at 758 Nm @ 1500 rpm.
AC Cabin and GPS are optional, which could be an extra cost over the base price.
Pros:
Cons:
Closing Recommendation
Both these graders put out a similar amount of engine power, so the real differences show up in torque, traction and features. The Sany STG170C-10 has more torque, a traction-focused differential and rear axle, and comes with AC and GPS as standard, which suits heavier grading work with driver comfort built in. The CASE 845B turns in a tighter circle and uses a load-sensing hydraulic system with hydrostatic steering for precise, safer control. So match the machine to your work: Sany STG170C-10 for torque-heavy grading with standard comfort, CASE 845B for tight-space maneuvering with precise hydraulic control.
Sany STG170C-10 Vs CASE 845B Motor Grader Price, Technical Specifications & Features
The Sany STG170C-10 Motor Grader is a high-performance grader machine built for highways, mining, and large infrastructure projects in India. It features a 173 HP Cummins QSB6.7 engine, providing strong power and fuel efficiency for heavy-duty grading tasks. With a 3.66 m moldboard and 95 kN drawbar pull, it ensures effective cutting, smooth leveling, and quicker work cycles. Its advanced hydraulic system enables precise blade control, while the ZF Tiptronic transmission ensures smooth gear shifting and better control during long operations. The balanced design enhances stability and finishing quality, while the ergonomic cabin improves visibility and operator comfort. The Sany STG170C-10 motor grader price in India ranges from ₹75 to ₹90 lakh. This grader machine from SANY Construction Equipment is ideal for contractors seeking high productivity and durability for large-scale grading performance.
The CASE 845B Motor Grader is a reliable road leveling machine in India, designed for road construction, infrastructure, and earthmoving work. This motor grader offers stable performance in medium-duty applications. It features a 6.7L FPT turbocharged diesel engine, producing 173 HP and 758 Nm torque. This model ensures fuel efficiency and consistent output during daily operations. The 3.66 m moldboard and balanced weight enhance grading stability, delivering smooth surface finishing with fewer passes. This increases on-site productivity. The load-sensing hydraulic system provides precise blade movement. The powershift transmission and hydrostatic steering enhance maneuverability, ensuring better control on uneven terrain. Manufactured by CASE Construction Equipment, it guarantees durability and service support. The CASE 845B motor grader price in India ranges from ₹80–95 lakhs. This CASE grader machine is suitable for contractors wanting efficient performance, low downtime, and reliable grading results.
CASE 845B vs Sany STG170C-10: Which One to Buy?
Both these graders put out a similar 173 HP, so the real difference comes down to torque, traction and features rather than raw engine size. The Sany STG170C-10 has more torque, at 880 Nm against the CASE 845B's 758 Nm, plus a no-spin differential and a Jingda rear axle built for better traction, and it comes with AC and GPS as standard. The CASE 845B turns in a tighter circle, at 7250 mm against the Sany's 7300 mm, and uses a load-sensing closed-center hydraulic system for more precise control, along with hydrostatic steering that includes an integrated emergency system.
If torque, traction and standard driver comfort matter most for your grading work, the Sany STG170C-10 is worth comparing. If you want tighter maneuvering in confined spaces and a more advanced hydraulic steering setup, look at the CASE 845B. See the full CASE grader range, the Sany grader range, all motor graders, or read the motor grader buying guide.
Sany STG170C-10
Pros:
Strong engine performance with maximum torque of 880 Nm @ 1300 rpm.
Higher maximum forward speed of 36.0 km/hr allows for quicker operation.
Equipped with a No spin differential system and reliable Jingda rear axle for better traction.
Standard AC Cabin and GPS for operator comfort and improved navigation.
More significant blade down pressure of 8769 kgf for effective grading.
Cons:
Higher price range compared to CASE 845B.
Turning radius is marginally larger at 7300 mm, which could affect maneuverability in tight spaces.
CASE 845B
Pros:
More affordable with a price range of ₹ 1.29-1.31 Crore.
Slightly higher max. forward speed of 41.5 km/hr for faster operation.
Smaller minimum turning radius of 7250 mm for better maneuverability.
Comes with a load-sensing closed center hydraulic system for precise control.
Hydrostatic steering with an integrated emergency system.
Cons:
Lower maximum torque compared to Sany at 758 Nm @ 1500 rpm.
AC Cabin and GPS are optional, which could be an extra cost over the base price.
Pros:
Cons:
Closing Recommendation
Both these graders put out a similar amount of engine power, so the real differences show up in torque, traction and features. The Sany STG170C-10 has more torque, a traction-focused differential and rear axle, and comes with AC and GPS as standard, which suits heavier grading work with driver comfort built in. The CASE 845B turns in a tighter circle and uses a load-sensing hydraulic system with hydrostatic steering for precise, safer control. So match the machine to your work: Sany STG170C-10 for torque-heavy grading with standard comfort, CASE 845B for tight-space maneuvering with precise hydraulic control.
Sany STG170C-10 Vs CASE 845B Motor Grader Price, Technical Specifications & Features
The Sany STG170C-10 Motor Grader is a high-performance grader machine built for highways, mining, and large infrastructure projects in India. It features a 173 HP Cummins QSB6.7 engine, providing strong power and fuel efficiency for heavy-duty grading tasks. With a 3.66 m moldboard and 95 kN drawbar pull, it ensures effective cutting, smooth leveling, and quicker work cycles. Its advanced hydraulic system enables precise blade control, while the ZF Tiptronic transmission ensures smooth gear shifting and better control during long operations. The balanced design enhances stability and finishing quality, while the ergonomic cabin improves visibility and operator comfort. The Sany STG170C-10 motor grader price in India ranges from ₹75 to ₹90 lakh. This grader machine from SANY Construction Equipment is ideal for contractors seeking high productivity and durability for large-scale grading performance.
The CASE 845B Motor Grader is a reliable road leveling machine in India, designed for road construction, infrastructure, and earthmoving work. This motor grader offers stable performance in medium-duty applications. It features a 6.7L FPT turbocharged diesel engine, producing 173 HP and 758 Nm torque. This model ensures fuel efficiency and consistent output during daily operations. The 3.66 m moldboard and balanced weight enhance grading stability, delivering smooth surface finishing with fewer passes. This increases on-site productivity. The load-sensing hydraulic system provides precise blade movement. The powershift transmission and hydrostatic steering enhance maneuverability, ensuring better control on uneven terrain. Manufactured by CASE Construction Equipment, it guarantees durability and service support. The CASE 845B motor grader price in India ranges from ₹80–95 lakhs. This CASE grader machine is suitable for contractors wanting efficient performance, low downtime, and reliable grading results.
68 differ · 11 identical
Key highlights: Sany STG170C-10 vs CASE 845B Motor Grader
Sany STG170C-10
CASE 845B
Engine Make
Cummins QSB6.7
FPT F4HE9684L
Max Torque
880 Nm @ 1300 rpm
758 Nm @ 1500 rpm
Fuel Tank
350 L
341 L
Hydraulic System
110 L
90 L
Tires
14 x 24" 16-PR (G3)
14 x 24 12L-G2 Tubeless
Frame Height
NA
298 mm
Max Lift Above Ground
480 mm
444.5 mm
Max Cutting Depth
630 mm
NA
Blade Pitch Angle
NA
NA
Wheel Base
6127 mm
6219 mm
Overall Length
11100 mm
8534 mm
Overall Height
3310 mm
3340 mm
Warranty
1 Yr. / 2500 hr.
1 Year
AC Cabin
Standard
Optional
GPS
Standard
Optional
Key highlights: Sany STG170C-10 vs CASE 845B Motor Grader
Sany STG170C-10
CASE 845B
Engine Make
Cummins QSB6.7
FPT F4HE9684L
Max Torque
880 Nm @ 1300 rpm
758 Nm @ 1500 rpm
Fuel Tank
350 L
341 L
Hydraulic System
110 L
90 L
Tires
14 x 24" 16-PR (G3)
14 x 24 12L-G2 Tubeless
Frame Height
NA
298 mm
Max Lift Above Ground
480 mm
444.5 mm
Max Cutting Depth
630 mm
NA
Blade Pitch Angle
NA
NA
Wheel Base
6127 mm
6219 mm
Overall Length
11100 mm
8534 mm
Overall Height
3310 mm
3340 mm
Warranty
1 Yr. / 2500 hr.
1 Year
AC Cabin
Standard
Optional
GPS
Standard
Optional
Full specifications: Sany STG170C-10 vs CASE 845B Motor Grader
Engine
Sany STG170C-10
CASE 845B
Model
Cummins 173 HP
FPT 173 HP
Fuel
Diesel
Diesel
Type
CEV IV
Electronic Common Rail fuel System; Water Cooled; 4 Cycle; Direct Injection; Turbocharged and Charge Air Cooled.
Gross Power
173 HP 129 kW @ 2200 rpm
173 HP (129 kW) @ 2200 rpm
Number Of Cylinders
NA
6
Max Torque
880 Nm @ 1300 rpm
758 Nm @ 1500 rpm
Displacement
6.7 L
6.7 L
Battery
NA
24V / 2 x 100 Ah
Alternator
NA
24 V / 80 A
Transmission
Sany STG170C-10
CASE 845B
Type
ZF Tiptronic Transmission
Powershift electronic shift change control with torque converter and automatic lockup
Speed
Sany STG170C-10
CASE 845B
Max. Forward Speed
36.0 km/hr
41.5 km/hr
Max. Reverse Speed
26.0 km/hr
27.2 km/hr
Axles
Sany STG170C-10
CASE 845B
Rear Axle
No spin differential system with reliable & efficient jingda rear axle.
Questions buyers ask about the Sany STG170C-10 vs CASE 845B
Ans.
The Sany STG170C-10 has more torque, at 880 Nm against the CASE 845B's 758 Nm. More torque means better push and traction when grading tougher ground.
Ans.
No, both AC and GPS are optional on the CASE 845B, adding to the cost if you fit them. The Sany STG170C-10 includes both as standard.
Ans.
The CASE 845B turns in a tighter space, with a minimum turning radius of 7250 mm against the Sany STG170C-10's 7300 mm, a small edge in confined-space work.
Ans.
Along with its Jingda rear axle, it is built to improve traction, helping the grader keep its grip on loose or uneven ground instead of one wheel spinning freely.
Ans.
The CASE 845B uses a load-sensing closed-center hydraulic system, which gives more precise control over grading movements than simpler hydraulic setups.
Ans.
The Sany STG170C-10 applies more down pressure, rated at 8769 kgf, which helps the blade push through tougher material during grading.
Sany STG170C-10 Vs CASE 845B - Compare Price & Availability Across 600+ Locations in India
Compare Sany STG170C-10 Vs CASE 845B price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
