Contact Us



    Your Captcha*

    captcha

    Chat with us

    Tata Hitachi Shinrai Pro VS CASE 770 NXe Series Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights Tata Hitachi Shinrai ProCASE 770 NXe Series
    Tata Hitachi Shinrai Pro VS CASE 770 NXe Series Backhoe Loader
    Tata Hitachi Shinrai Price
    Tata Hitachi Shinrai Pro

    ₹ 29-34 Lakhs

    CASE 770 49 HP Price
    CASE 770 NXe Series

    ₹ 22-24 lakh

    Particulars Tata Hitachi Shinrai Pro CASE 770 NXe Series

    Overview Summary

    The Tata Hitachi Shinrai Pro CEV5 is a heavy-duty backhoe loader built for strength and precision with a higher engine power and advanced hydraulic system, targeting heavy applications. In contrast, the CASE 770 NXe Series is known for its superior fuel efficiency and operator comfort, with an affordable price point but slightly less power than the Tata Hitachi model.

    Tata Hitachi Shinrai Pro CEV5

    Pros:

    • Built for heavy-duty applications with exceptional strength and precision
    • Higher engine power of 55 HP for potentially more efficient operations
    • Equipped with Carraro-make synchro-shuttle transmission for better control
    • Electronically controlled Variable Displacement Pump helps optimize performance and fuel consumption
    • Substantial warranty offering of 1 Year or 2000 hours
    • Standard GPS system for advanced tracking and management
    • Oil-immersed wet disc brakes for better control in narrow spaces

    Cons:

    • Higher price range of ₹ 29-34 Lakhs
    • Slightly heavier, which could impact fuel consumption and maneuverability

    CASE 770 NXe Series

    Pros:

    • Affordable price range of ₹ 22-24 lakh, making it more accessible
    • Superior fuel efficiency which may reduce operating costs
    • Known for enhanced operator comfort for maximum productivity
    • Higher maximum torque of 252.2 Nm at lower RPMs for good low-end performance
    • Advanced hydraulics with higher pump flow rate at 119 L/min
    • Has a specified excavator maximum lift capacity of 1417 kg

    Cons:

    • Lower engine power of 49.5 HP which could affect performance in demanding situations
    • Smaller hydraulic tank capacity, which may affect prolonged intensive use
    • Lesser gross power could mean reduced efficiency for certain tasks

    Pros:

    Cons:

    Closing Recommendation

    In choosing between the two, consider the specific requirements of your project. If your priority is heavy-duty performance and advanced hydraulics at a higher price point, the Tata Hitachi Shinrai Pro CEV5 could be suitable. However, for operations where fuel efficiency and affordability are key factors, along with a good lift capacity, the CASE 770 NXe Series might be the better option.

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series Backhoe Loader Price, Technical Specifications & Features

    Brand Tata Hitachi Backhoe Loader CASE Backhoe Loader
    Type 2WD 2WD
    Price ₹ 29-34 Lakhs ₹ 22-24 lakh
    Engine TATA 55 HP FPT 49.5 HP
    Bucket 0.26 m³ 0.26 m³
    Shovel 1.1 m³ 1.1 m³
    Max Digging Depth 4700 mm 4400 mm
    Max Dump Height 2690 mm 2720 mm
    Weight 8450 Kg 7610 Kg
    Quick Overview:

    The Tata Hitachi Shinrai Pro Backhoe Loader is a cost-effective and practical machine designed for everyday construction and utility work. It features a 55 HP CEV5 engine, offering a good balance of performance and fuel savings for light to medium-duty tasks. The Shinrai Pro comes with multiple operating modes (Eco, Standard, Power), which help optimize fuel use based on workload. Its comfortable cabin, simple controls, and wide attachment options make it easy to operate for various job needs. With reliable performance and easy maintenance, it supports consistent daily operations. The Tata Hitachi Shinrai Pro price in India is expected to be around ₹29 to 34 lakh, making it a suitable choice for contractors looking for an affordable machine with steady productivity.

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    Overview Summary

    The Tata Hitachi Shinrai Pro CEV5 is a heavy-duty backhoe loader built for strength and precision with a higher engine power and advanced hydraulic system, targeting heavy applications. In contrast, the CASE 770 NXe Series is known for its superior fuel efficiency and operator comfort, with an affordable price point but slightly less power than the Tata Hitachi model.

    Tata Hitachi Shinrai Pro CEV5

    Pros:

    • Built for heavy-duty applications with exceptional strength and precision
    • Higher engine power of 55 HP for potentially more efficient operations
    • Equipped with Carraro-make synchro-shuttle transmission for better control
    • Electronically controlled Variable Displacement Pump helps optimize performance and fuel consumption
    • Substantial warranty offering of 1 Year or 2000 hours
    • Standard GPS system for advanced tracking and management
    • Oil-immersed wet disc brakes for better control in narrow spaces

    Cons:

    • Higher price range of ₹ 29-34 Lakhs
    • Slightly heavier, which could impact fuel consumption and maneuverability

    CASE 770 NXe Series

    Pros:

    • Affordable price range of ₹ 22-24 lakh, making it more accessible
    • Superior fuel efficiency which may reduce operating costs
    • Known for enhanced operator comfort for maximum productivity
    • Higher maximum torque of 252.2 Nm at lower RPMs for good low-end performance
    • Advanced hydraulics with higher pump flow rate at 119 L/min
    • Has a specified excavator maximum lift capacity of 1417 kg

    Cons:

    • Lower engine power of 49.5 HP which could affect performance in demanding situations
    • Smaller hydraulic tank capacity, which may affect prolonged intensive use
    • Lesser gross power could mean reduced efficiency for certain tasks

    Pros:

    Cons:

    Closing Recommendation

    In choosing between the two, consider the specific requirements of your project. If your priority is heavy-duty performance and advanced hydraulics at a higher price point, the Tata Hitachi Shinrai Pro CEV5 could be suitable. However, for operations where fuel efficiency and affordability are key factors, along with a good lift capacity, the CASE 770 NXe Series might be the better option.

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series Backhoe Loader Price, Technical Specifications & Features

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Brand
    Tata Hitachi Backhoe Loader CASE Backhoe Loader
    Type
    2WD 2WD
    Price
    ₹ 29-34 Lakhs ₹ 22-24 lakh
    Engine
    TATA 55 HP FPT 49.5 HP
    Bucket
    0.26 m³ 0.26 m³
    Shovel
    1.1 m³ 1.1 m³
    Max Digging Depth
    4700 mm 4400 mm
    Max Dump Height
    2690 mm 2720 mm
    Weight
    8450 Kg 7610 Kg
    Quick Overview:

    The Tata Hitachi Shinrai Pro Backhoe Loader is a cost-effective and practical machine designed for everyday construction and utility work. It features a 55 HP CEV5 engine, offering a good balance of performance and fuel savings for light to medium-duty tasks. The Shinrai Pro comes with multiple operating modes (Eco, Standard, Power), which help optimize fuel use based on workload. Its comfortable cabin, simple controls, and wide attachment options make it easy to operate for various job needs. With reliable performance and easy maintenance, it supports consistent daily operations. The Tata Hitachi Shinrai Pro price in India is expected to be around ₹29 to 34 lakh, making it a suitable choice for contractors looking for an affordable machine with steady productivity.

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series Backhoe Loader Key Highlights

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Engine Make Tata Motors 497D139 FPT S8000
    Fuel Tank 128 L 129 L
    Max Torque 225 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Max Speed 30 km/hr 32.4 km/hr
    Hydraulic System NA 100 L
    Max Working Height 6050 mm 5490 mm
    Excavator Max Lift Capacity NA 1417 kg
    Loader Load Over Height 4200 mm 3640 mm
    Overall Length 6040 mm 5880 mm
    Wheel Base 2130 mm 2180 mm
    Bucket Digging Force 6026 kgf 5000 kgf
    Shovel Breakout Force 5722 kgf 5275 kgf
    Warranty 1 Yr. / 2000 hr. 1 Year
    AC Cabin Optional Optional
    GPS Standard Standard

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series Backhoe Loader Key Highlights

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Engine Make
    Tata Motors 497D139 FPT S8000
    Fuel Tank
    128 L 129 L
    Max Torque
    225 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Max Speed
    30 km/hr 32.4 km/hr
    Hydraulic System
    NA 100 L
    Max Working Height
    6050 mm 5490 mm
    Excavator Max Lift Capacity
    NA 1417 kg
    Loader Load Over Height
    4200 mm 3640 mm
    Overall Length
    6040 mm 5880 mm
    Wheel Base
    2130 mm 2180 mm
    Bucket Digging Force
    6026 kgf 5000 kgf
    Shovel Breakout Force
    5722 kgf 5275 kgf
    Warranty
    1 Yr. / 2000 hr. 1 Year
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series Backhoe Loader Specifications

    Engine

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Model TATA 55 HP FPT 49.5 HP
    Type CEV-5, Naturally Aspirated, 4 Cylinder, Water Cooled, CRDI Diesel Engine BS-III; Water Cooled.
    Gross Power 55 HP (41 kW) @ 2200 RPM 49.5 HP (37 kW)
    Max Torque 225 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Displacement 3.784 L 3.9 L
    Battery 12 V / 150 Ah 12V / 110 Ah
    Alternator 120A NA

    Transmission

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Type Equipped with Carraro-make synchro-shuttle transmission. CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Type Hydraulic actuation with priority for smooth control. Power Steering
    Working Pressure NA 140 bar

    Steering Turning Circle

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Inner Wheels Braked - Outside Loader Bucket 11730 mm 4600 mm
    Inner Wheels Braked - Outside Wheels 8600 mm NA
    Inner Wheels not Braked - Outside Loader Bucket NA 5550 mm
    Inner Wheels not Braked - Outside Wheels NA NA

    Brakes

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Service Oil-immersed wet disc; hydraulic-actuated with independent pedals for better control in narrow spaces Hydraulic foot operated; 2 disc per side
    Parking Hand operated disc brake on the rear axle. Mechanically actuated caliper type brake pack on Rear axle input shaft

    Tyres

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Front 9 x 16.16 PR 9 x 16 - 16 PR
    Rear 16.9 - 28 12 PR 16.9 x 28 - 12 PR

    Speed

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Forward- 1st gear 5 km/hr 5 km/hr
    Reverse- 1st gear 5 km/hr 5.9 km/hr
    Forward- 2nd gear 8 km/hr 7.9 km/hr
    Reverse- 2nd gear 9 km/hr 9.4 km/hr
    Forward- 3rd gear 17 km/hr 16.9 km/hr
    Reverse- 3rd gear Not recommended 19.8 km/hr
    Forward- 4th gear 30.0 km/hr 32.4 km/hr
    Reverse- 4th gear Not Recommeded Not recommended

    Hydraulics

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Type EHS (Electronically controlled Hydraulic System), Variable Displacement Pump with Electric Displacement Control and Load Sense to optimize performance & fuel consumption Open Center Load Sensing system; Axial Piston with Electric Displacement Control
    Maximum Pump Flow 105 L/min @ 1950 RPM 119 L/min
    System Pressure 265 bar 240 bar

    Axles

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Rear Axle Rear heavy-duty carraro axle high brake torque CARRARO 28.32M
    Front Axle Heavy-duty; non-powered axle CNH PS1300 (2WD)

    Service Capacities

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Fuel Tank 128 L 129 L
    Engine Coolant 14.5 L 20 L
    Engine Oil 13.5 L 8.6 L
    Hydraulic Tank 65 L 48 L
    Hydraulic System NA 100 L
    Transmission 16.0 L 18 L
    Rear Axle 17.1 L 17.1 L

    Excavator Performance

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Maximum Digging Depth 4700 mm 4400 mm
    Reach-Ground Level to Rear Wheel Centre 6880 mm 6950 mm
    Reach-Ground Level to Slew Centre 5440 mm 5630 mm
    Reach at Full Height to Slew Centre 2001 mm 2150 mm
    Side Reach to Centre Line of Machine 6050 mm NA
    Maximum Working Height 6050 mm 5490 mm
    Maximum Load Over Height 4200 mm 3640 mm
    Bucket Rotation Angle 180° 185°
    Bucket Digging force 6026 kgf 5000 kgf
    Arm Digging force 3087 kgf 2751 kgf
    Maximum Lift Capacity NA 1417 kg
    Standard Bucket Capacity 0.26 m³ 0.26 m³
    Standard Bucket Width 752 mm NA

    Loader Performance

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Dump Height 2690 mm 2720 mm
    Load Over Height 3305 mm 3300 mm
    Pin Height 3550 mm 3580 mm
    Pin Forward Reach 360 mm 240 mm
    Reach At Ground 1620 mm 1980 mm
    Maximum Reach at Full Height 1332 mm 1190 mm
    Max Reach Full Height Dumped 840 mm 760 mm
    Below Ground Level Dig Depth 75 mm 110 mm
    Rollback at Ground 45° 33°
    Dump Angle 45° 45°
    Shovel Breakout Force 5722 kgf 5275 kgf
    Loader Arm Breakout Force 5139 kgf 5110 kgf
    Maximum Payload 1800 kg 1925 kg

    Overall Dimensions And Weight

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Machine Weight 8230 - 8450 Kg 7610 kg
    Overall Length 6040 mm 5880 mm
    Wheelbase 2130 mm 2180 mm
    Slew Centre to Rear Axle Centre 1370 mm NA
    Minimum Ground Clearance 320 mm 380 mm
    Slew Ground Clearance 485 mm NA
    Height of Cabin 2940 mm 2880 mm
    Overall Height 3530 mm 3850 mm
    Track Width-Rear 1710 mm 1700 mm
    Track Width-Front 1900 mm 1880 mm
    Width Over Bucket 2354 mm 2280 mm

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series Backhoe Loader Specifications

    Engine

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Model
    TATA 55 HP FPT 49.5 HP
    Type
    CEV-5, Naturally Aspirated, 4 Cylinder, Water Cooled, CRDI Diesel Engine BS-III; Water Cooled.
    Gross Power
    55 HP (41 kW) @ 2200 RPM 49.5 HP (37 kW)
    Max Torque
    225 Nm @ 1400 rpm 252.2 Nm @ 1200 RPM
    Displacement
    3.784 L 3.9 L
    Battery
    12 V / 150 Ah 12V / 110 Ah
    Alternator
    120A NA

    Transmission

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Type
    Equipped with Carraro-make synchro-shuttle transmission. CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Type
    Hydraulic actuation with priority for smooth control. Power Steering
    Working Pressure
    NA 140 bar

    Steering Turning Circle

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Inner Wheels Braked - Outside Loader Bucket
    11730 mm 4600 mm
    Inner Wheels Braked - Outside Wheels
    8600 mm NA
    Inner Wheels not Braked - Outside Loader Bucket
    NA 5550 mm
    Inner Wheels not Braked - Outside Wheels
    NA NA

    Brakes

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Service
    Oil-immersed wet disc; hydraulic-actuated with independent pedals for better control in narrow spaces Hydraulic foot operated; 2 disc per side
    Parking
    Hand operated disc brake on the rear axle. Mechanically actuated caliper type brake pack on Rear axle input shaft

    Tyres

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Front
    9 x 16.16 PR 9 x 16 - 16 PR
    Rear
    16.9 - 28 12 PR 16.9 x 28 - 12 PR

    Speed

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Forward- 1st gear
    5 km/hr 5 km/hr
    Reverse- 1st gear
    5 km/hr 5.9 km/hr
    Forward- 2nd gear
    8 km/hr 7.9 km/hr
    Reverse- 2nd gear
    9 km/hr 9.4 km/hr
    Forward- 3rd gear
    17 km/hr 16.9 km/hr
    Reverse- 3rd gear
    Not recommended 19.8 km/hr
    Forward- 4th gear
    30.0 km/hr 32.4 km/hr
    Reverse- 4th gear
    Not Recommeded Not recommended

    Hydraulics

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Type
    EHS (Electronically controlled Hydraulic System), Variable Displacement Pump with Electric Displacement Control and Load Sense to optimize performance & fuel consumption Open Center Load Sensing system; Axial Piston with Electric Displacement Control
    Maximum Pump Flow
    105 L/min @ 1950 RPM 119 L/min
    System Pressure
    265 bar 240 bar

    Axles

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Rear Axle
    Rear heavy-duty carraro axle high brake torque CARRARO 28.32M
    Front Axle
    Heavy-duty; non-powered axle CNH PS1300 (2WD)

    Service Capacities

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Fuel Tank
    128 L 129 L
    Engine Coolant
    14.5 L 20 L
    Engine Oil
    13.5 L 8.6 L
    Hydraulic Tank
    65 L 48 L
    Hydraulic System
    NA 100 L
    Transmission
    16.0 L 18 L
    Rear Axle
    17.1 L 17.1 L

    Excavator Performance

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Maximum Digging Depth
    4700 mm 4400 mm
    Reach-Ground Level to Rear Wheel Centre
    6880 mm 6950 mm
    Reach-Ground Level to Slew Centre
    5440 mm 5630 mm
    Reach at Full Height to Slew Centre
    2001 mm 2150 mm
    Side Reach to Centre Line of Machine
    6050 mm NA
    Maximum Working Height
    6050 mm 5490 mm
    Maximum Load Over Height
    4200 mm 3640 mm
    Bucket Rotation Angle
    180° 185°
    Bucket Digging force
    6026 kgf 5000 kgf
    Arm Digging force
    3087 kgf 2751 kgf
    Maximum Lift Capacity
    NA 1417 kg
    Standard Bucket Capacity
    0.26 m³ 0.26 m³
    Standard Bucket Width
    752 mm NA

    Loader Performance

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Dump Height
    2690 mm 2720 mm
    Load Over Height
    3305 mm 3300 mm
    Pin Height
    3550 mm 3580 mm
    Pin Forward Reach
    360 mm 240 mm
    Reach At Ground
    1620 mm 1980 mm
    Maximum Reach at Full Height
    1332 mm 1190 mm
    Max Reach Full Height Dumped
    840 mm 760 mm
    Below Ground Level Dig Depth
    75 mm 110 mm
    Rollback at Ground
    45° 33°
    Dump Angle
    45° 45°
    Shovel Breakout Force
    5722 kgf 5275 kgf
    Loader Arm Breakout Force
    5139 kgf 5110 kgf
    Maximum Payload
    1800 kg 1925 kg

    Overall Dimensions And Weight

    Tata Hitachi Shinrai Pro CASE 770 NXe Series
    Machine Weight
    8230 - 8450 Kg 7610 kg
    Overall Length
    6040 mm 5880 mm
    Wheelbase
    2130 mm 2180 mm
    Slew Centre to Rear Axle Centre
    1370 mm NA
    Minimum Ground Clearance
    320 mm 380 mm
    Slew Ground Clearance
    485 mm NA
    Height of Cabin
    2940 mm 2880 mm
    Overall Height
    3530 mm 3850 mm
    Track Width-Rear
    1710 mm 1700 mm
    Track Width-Front
    1900 mm 1880 mm
    Width Over Bucket
    2354 mm 2280 mm

    Popular Comparisons with Tata Hitachi Shinrai Pro

    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Popular Comparisons with CASE 770 NXe Series

    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series - Compare Price & Availability Across 600+ Locations in India

    Compare Tata Hitachi Shinrai Pro Vs CASE 770 NXe Series price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare