XCMG XE80C vs Liugong 908E: the two differ on 72 of 95 listed specs. The main differences are Engine (Kubota 57.6 HP vs Yanmar 62 HP), Price (₹28 - 30 lakh vs ₹28 - 32 lakh), Operating Weight (7460 Kg vs 7500 Kg), Bucket Capacity (0.18 - 0.30 m³ vs 0.32 m³). The other 23 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
XCMG XE80C
Liugong 908E
XCMG XE80C
VS
Liugong 908E
Excavator
XCMG XE80C vs Liugong 908E: the two differ on 72 of 95 listed specs. The main differences are Engine (Kubota 57.6 HP vs Yanmar 62 HP), Price (₹28 - 30 lakh vs ₹28 - 32 lakh), Operating Weight (7460 Kg vs 7500 Kg), Bucket Capacity (0.18 - 0.30 m³ vs 0.32 m³). The other 23 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
XCMG XE80C
₹28 - 30 lakh
Liugong 908E
₹28 - 32 lakh
Particulars
XCMG XE80C
Liugong 908E
Liugong 908E vs XCMG XE80C: Which One to Buy?
The short answer is width against strength. The XCMG XE80C is narrower, so it gets into lanes and gaps other machines cannot, and it comes with a standard AC cabin. The Liugong 908E digs harder, carries a bigger bucket and can be ordered with GPS. Both are 8-ton class mini excavators for city work, pipelines, small foundations and farm jobs.
For an owner-operator the decision is usually about the sites you can reach. If your work is inside old city areas, narrow compounds and between buildings, the slimmer XE80C wins jobs the other machine has to refuse. If you dig hard soil, load small tippers or run the machine on rent, the stronger digging force and bigger bucket of the 908E finish work faster, and GPS helps you watch hours when the machine is out. Both brands are Chinese, so check dealer distance and parts stock near your site. See the Liugong range, the XCMG range, or read our mini excavator guide.
XCMG XE80C Excavator
Pros:
Powerful and reliable Kubota engine with 57.6 HP and maximum torque of 222.5 Nm
Compact design with an overall width of 1740 mm allowing for operations in restricted spaces
Standard AC cabin for operator comfort
Decent gradeability of 35° suitable for various terrains
Cons:
Smaller bucket capacity range of 0.18 - 0.30 m³ compared to competitor
Lack of GPS option limits tracking and fleet management capabilities
Details such as mileage, ground bearing pressure and digging force are not available
Liugong 908E Excavator
Pros:
Optional GPS for advanced tracking and operational management
Slightly higher engine power and bucket capacity (62 HP and 0.32 m³ respectively)
Better bucket digging force of 56 kN and arm force of 36 kN enhancing efficiency
Higher ground bearing capacity at 33.3 kPa
Cons:
Longer undercarriage length may affect maneuverability in tight spaces
Although gradeability percentage is the same as the competitor, the given 70% figure appears to be an incorrect representation of 35°
Higher operating weight could impact transport and operating costs
Pros:
Cons:
Closing Recommendation
Both are useful 8-ton class mini excavators, so pick by the sites you take and the soil you dig. Choose the XCMG XE80C when access is tight, when a narrow body helps you get through small gates and work between walls, and when a standard AC cabin keeps your driver comfortable in a hot area. Choose the Liugong 908E when you dig hard or stony ground and want more digging force, when a bigger bucket moves more per pass, and when GPS helps you watch a machine that is out on hire. So match the machine to your work: XCMG XE80C for tight access and driver comfort, Liugong 908E for hard digging and rental tracking.
XCMG XE80C Vs Liugong 908E Excavator Price, Technical Specifications & Features
Designed for efficiency and advanced functionility Liugong’s908E small excavator is suitable for light construction and landscaping applications.
Agency review
Planning to buy the XCMG XE80C Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Liugong 908E Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Liugong 908E vs XCMG XE80C: Which One to Buy?
The short answer is width against strength. The XCMG XE80C is narrower, so it gets into lanes and gaps other machines cannot, and it comes with a standard AC cabin. The Liugong 908E digs harder, carries a bigger bucket and can be ordered with GPS. Both are 8-ton class mini excavators for city work, pipelines, small foundations and farm jobs.
For an owner-operator the decision is usually about the sites you can reach. If your work is inside old city areas, narrow compounds and between buildings, the slimmer XE80C wins jobs the other machine has to refuse. If you dig hard soil, load small tippers or run the machine on rent, the stronger digging force and bigger bucket of the 908E finish work faster, and GPS helps you watch hours when the machine is out. Both brands are Chinese, so check dealer distance and parts stock near your site. See the Liugong range, the XCMG range, or read our mini excavator guide.
XCMG XE80C Excavator
Pros:
Powerful and reliable Kubota engine with 57.6 HP and maximum torque of 222.5 Nm
Compact design with an overall width of 1740 mm allowing for operations in restricted spaces
Standard AC cabin for operator comfort
Decent gradeability of 35° suitable for various terrains
Cons:
Smaller bucket capacity range of 0.18 - 0.30 m³ compared to competitor
Lack of GPS option limits tracking and fleet management capabilities
Details such as mileage, ground bearing pressure and digging force are not available
Liugong 908E Excavator
Pros:
Optional GPS for advanced tracking and operational management
Slightly higher engine power and bucket capacity (62 HP and 0.32 m³ respectively)
Better bucket digging force of 56 kN and arm force of 36 kN enhancing efficiency
Higher ground bearing capacity at 33.3 kPa
Cons:
Longer undercarriage length may affect maneuverability in tight spaces
Although gradeability percentage is the same as the competitor, the given 70% figure appears to be an incorrect representation of 35°
Higher operating weight could impact transport and operating costs
Pros:
Cons:
Closing Recommendation
Both are useful 8-ton class mini excavators, so pick by the sites you take and the soil you dig. Choose the XCMG XE80C when access is tight, when a narrow body helps you get through small gates and work between walls, and when a standard AC cabin keeps your driver comfortable in a hot area. Choose the Liugong 908E when you dig hard or stony ground and want more digging force, when a bigger bucket moves more per pass, and when GPS helps you watch a machine that is out on hire. So match the machine to your work: XCMG XE80C for tight access and driver comfort, Liugong 908E for hard digging and rental tracking.
XCMG XE80C Vs Liugong 908E Excavator Price, Technical Specifications & Features
Questions buyers ask about the XCMG XE80C vs Liugong 908E
Ans.
The XCMG XE80C fits better. It is narrower overall, so it passes through small gates and works between close walls where a wider machine cannot turn. The Liugong 908E also works in small spaces but has a longer undercarriage, so it needs a little more room. Measure your usual site entry before you decide.
Ans.
The Liugong 908E digs hard soil more easily. It has more bucket digging force and more arm force, so it breaks into packed or stony ground with less effort. The XE80C is fine in normal soil and sand. If your jobs are on old road beds, hard clay or stony land, the extra force on the 908E saves time.
Ans.
The XCMG XE80C comes with a standard AC cabin. The Liugong 908E does not list one as standard. In hot districts, an AC cabin keeps the driver comfortable through the afternoon and keeps output steady. If your driver sits in the machine all day in a hot region, this is a strong point for the XE80C.
Ans.
The Liugong 908E suits rental better because GPS is available, so you can check hours and location while the machine is out. Its bigger bucket also helps a hirer finish faster, which brings repeat work. The XE80C is easier to place on tight sites, which can win you jobs, but you have no built-in way to track it.
Ans.
The XCMG XE80C usually costs a little less to run because it is lighter and has a smaller engine, so it burns less fuel on light work. The Liugong 908E uses more but moves more soil per hour. On light landscaping and plumbing work the XE80C is cheaper; on steady digging the 908E may cost less per unit of work.
XCMG XE80C Vs Liugong 908E - Compare Price & Availability Across 600+ Locations in India
Compare XCMG XE80C Vs Liugong 908E price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
