XCMG ZL33FV VS Tata Hitachi TL340H Prime Wheel Loader

₹ 53-55 Lakhs^*

XCMG ZL33FV

Engine

Weichai 133 HP
Bucket

1.8 - 3.1 m³
Weight

10600 kg
Fwd. Speed

40 km/h
Dump Height

2850 mm
Tripping Load

6000 kg

Small (8-15 Ton)

₹ 47-49 Lakhs^*

Tata Hitachi TL340H Prime

Engine

Cummins 121 HP
Bucket

1.8 - 2.7 m³
Weight

10980 kg
Fwd. Speed

30 km/h
Dump Height

2792 mm
Tripping Load

7340 kg

Small (8-15 Ton)

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

XCMG ZL33FV VS Tata Hitachi TL340H Prime Wheel Loader

XCMG ZL33FV

₹ 53-55 Lakhs

Tata Hitachi TL340H Prime

₹ 47-49 Lakhs

Particulars	XCMG ZL33FV	Tata Hitachi TL340H Prime

Tata Hitachi TL340H Prime vs XCMG ZL33FV: Which Wheel Loader to Buy?

Both are mid size wheel loaders used in yards, crushers, farms and urban building work. The Tata Hitachi TL340H Prime is built around lower fuel use and a stronger push into the pile, so it suits packed material, crusher feed and steady loading where the bucket has to break in. The XCMG ZL33FV has more engine power, travels faster and comes with an AC cabin as standard, which helps on long yard runs and full summer shifts.

Travel speed decides more than people expect. A loader that carries material a long way across a yard spends most of its day driving, not digging, so a faster machine finishes more cycles. But if your stockpile sits next to the crusher or the truck, speed gives you nothing and push force is what matters. Count your carry distance first. See the Tata Hitachi wheel loader range, the XCMG wheel loader range, the full wheel loader range, or read our wheel loader guide.

Tata Hitachi TL340H Prime Wheel Loader

Pros:

Enhanced fuel efficiency and operator comfort
121 HP Cummins engine with turbocharged aspiration for good performance
High torque of 500 Nm at lower rpm (1500 rpm) for better drivability
Large fuel tank capacity of 165 liters
Operational weight of 10980 kg provides stability
Robust 4-cycle water-cooled, direct injection engine
Compliant with BSIV emission standards
Equipped with 4WD for better traction
Wet type disc brake integrated in wheel hub for efficient braking
Load sensing hydraulic system for efficient operation

Cons:

AC Cabin is optional, which may add to overall cost
Top reverse speed is relatively low at 6 km/h
Maximum pump flow and hydraulic system details are not provided

XCMG ZL33FV Wheel Loader

Pros:

Strong 133 HP Weichai engine for high-end performance
Higher engine torque of 610 Nm within a useful rpm range (1400-1600 rpm)
CEV Stage IV emission standards compliance
AC Cabin comes as a standard feature, enhancing operator comfort
Higher top forward and reverse speeds of 40 km/h and 30 km/h, respectively
Greater bucket capacity range up to 3.1 m³
Better dumping height at 2850 mm, facilitating easy dumping

Cons:

Engine and transmission details like alternator and battery are not specified
Lower breakout force compared to Tata Hitachi TL340H Prime
Wheel base is shorter than Tata Hitachi's model, which could affect stability

Closing Recommendation

Both loaders will fill trucks all day, so choose by your yard and your material. Take the Tata Hitachi TL340H Prime if you feed a crusher or dig into packed, settled material, want lower diesel use and value the wider service reach in small towns. Take the XCMG ZL33FV if you carry material a long way across a yard, need the faster travel to finish more round trips, and want your driver in a cool cabin through summer. So match the machine to your work: Tata Hitachi TL340H Prime for packed material and low fuel cost, XCMG ZL33FV for long carry distances and summer comfort.