ACE HXP 150 VS Indo Power 20FNT Crane

₹ 26 - 28 Lakh^*

ACE HXP 150

Lift Capacity

15 Tonnes
Boom Height

21 m
Engine

Simpson 48 BHP
Weight

13350 kg
Turning Radius

6500 mm
Drive Type

2 Wheel drive

Pick & Carry Crane

₹ 40 - 42 Lakh^*

Indo Power 20FNT

Lift Capacity

20 Tonnes
Boom Height

19.59 m
Engine

VECV 101 HP
Weight

16430 kg
Turning Radius

7000 mm
Drive Type

4WD

Pick & Carry Crane

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

ACE HXP 150 VS Indo Power 20FNT Crane

ACE HXP 150

₹ 26 - 28 Lakh

Indo Power 20FNT

₹ 40 - 42 Lakh

Particulars	ACE HXP 150	Indo Power 20FNT

ACE HXP 150 vs Indo Power 20FNT: Reach for Height or Power for Heavy Loads?

The ACE HXP 150 is built for jobs where you need to reach up, not just lift up. Its boom goes higher than the Indo Power 20FNT, and it can also work as an aerial platform, so a driver can use it for maintenance jobs high above the ground, not only for lifting loads. The Indo Power 20FNT is built for raw lifting power. It carries a heavier load, runs a stronger engine, and its four wheel drive gives better grip on rough or muddy ground.

If your site work often means climbing to a height to fix or check something, the HXP 150's extra reach and platform use can save you from hiring a separate lift machine. If your work is mostly about moving and lifting heavy material across uneven ground, the 20FNT's power and traction matter more than reach. Both makers run wide dealer networks across India. See the full ACE crane range, the Indo Power range, all mobile cranes, or our crane buying guide.

ACE HXP 150

Pros:

15 tonne lifting capacity suitable for medium to heavy duty tasks
48 BHP water cooled diesel engine
Heavy duty sliding mesh transmission with 6 forward and 2 reverse speeds with high and low range selector
Articulated power steering with 55 degree articulation
Smaller minimum turning radius of 6500 mm
Hoist line speed of 50 meters per minute
Gear or intra vane type main pump
4 spool heavy duty control valve
4 part boom with 3 hydraulic sections and 1 power extended section
Higher max boom height of 21 m
Hydraulic tank capacity of 125 L
Parking brake is pneumatically operated fail safe type

Cons:

Lower 48 BHP engine power compared to Indo Power 20FNT
2 wheel drive limits traction versus 4WD
Lower max speed of 28 km/h
Overall length not provided
Creep speed not provided
Higher operating weight of 13350 kg compared to lighter pick and carry cranes

Indo Power 20FNT

Pros:

Higher 20 tonne lifting capacity
More powerful 101 HP BS IV engine
4 wheel drive for enhanced traction
Higher max speed of 50 km/h
Six falls hoist with fail safe brake
Fully air operated S cam dual circuit brakes on both axles
Vane type hydraulic pump
5 or 6 spool control valve with built in pressure relief valve
4 part telescopic boom with synchronized hydraulic operation
Max boom height of 19.59 m

Cons:

Larger minimum turning radius of 7000 mm
Higher operating weight of 16430 kg
Creep speed not provided
Fuel, hydraulic, and transmission oil capacities not provided

Closing Recommendation

The ACE HXP 150 and Indo Power 20FNT suit different kinds of site work. Pick the ACE HXP 150 when your work needs height and reach, since it climbs higher and can also work as a platform for jobs above the ground. Pick the Indo Power 20FNT when your work needs raw lifting power and grip, since it carries heavier loads, runs a stronger engine, and its four wheel drive holds steady on rough ground. Think about what your site actually needs before you choose. So match the machine to your work: ACE HXP 150 for height and elevated tasks, Indo Power 20FNT for heavy lifting and tough ground.